Alright, after way too long, I've finally gotten oreo working well enough to test. Please note:
These are beta quality, not suitable for daily usage yet.
Known issues will be listed. Anything not listed should work (but not everything has been tested).
Tested with opengapps micro arm64 8.1.
If you would like to test nougat upgrades, please let me know how that goes. I have only done a clean install so far. Keep in mind that you will need to flash oreo gapps, as gapps persistence does not work across versions.
Sources
Device
Kernel
Vendor
Prerequisites
All oreo builds require an updated TWRP to flash:
jasmine-twrp-7.1-3.2.3-r1.img
Build 2018-10-17
Known issues:
SELinux is permissive.
Camera shutter button is partially obscured by navbar.
AOKP Oreo:
aokp_jasmine_oreo_UNOFFICIAL_2018-10-17.zip
MD5: faffe6c263032870c29bba22b91fc090
Lineage Oreo:
lineage_jasmine_oreo_UNOFFICIAL_2018-10-17.zip
MD5: 596f244f362ddf577bf57b13429b9740
my question is the phone call is not available right?
and I'm seeing in TWRP that decrypted works faster?
juniorgerman said:
my question is the phone call is not available right?
and I'm seeing in TWRP that decrypted works faster
Click to expand...
Click to collapse
I have not yet put in my SIM card, so radio (data, sms, voice) is not tested yet. I will put in my SIM card and test tomorrow.
it does not allow me to save the WiFi network manually
since WiFi network that I use is hidden and I have to put SSID and password
---------- Post added at 06:27 PM ---------- Previous post was at 06:17 PM ----------
logcat:https://drive.google.com/file/d/1UmbWI10QbQi-wno0shSWlABY8XSfJPkV/view?usp=sharing
edit
---------- Post added at 06:40 PM ---------- Previous post was at 06:27 PM ----------
@tdm
how strange did i connect after 5 minutes, will it be too hard to register wifi network that I save manually with SSID and password?
I cant turn on wifi on both roms ..
jollyjesus said:
I cant turn on wifi on both roms ..
Click to expand...
Click to collapse
Strange it's been working great for me. But I am using a build from another server. I'll test the posted builds tomorrow.
jollyjesus said:
I cant turn on wifi on both roms ..
Click to expand...
Click to collapse
the wifi turns on well for me, I only have trouble connecting to hidden wifi networks
Enviado desde mi K88 mediante Tapatalk
juniorgerman said:
the wifi turns on well for me, I only have trouble connecting to hidden wifi networks
Enviado desde mi K88 mediante Tapatalk
Click to expand...
Click to collapse
Unfortunately I don't have any experience with hidden ssid networks. But I can tell you that the WiFi kernel driver, firmware, and configuration are exactly the same as nougat. So any issues are most likely in the upper layers... the layers common to many or all devices. I haven't heard of any common complaints about hidden ssid networks on oreo. Do you have any other devices that can run lineage oreo to test?
tdm said:
Unfortunately I don't have any experience with hidden ssid networks. But I can tell you that the WiFi kernel driver, firmware, and configuration are exactly the same as nougat. So any issues are most likely in the upper layers... the layers common to many or all devices. I haven't heard of any common complaints about hidden ssid networks on oreo. Do you have any other devices that can run lineage oreo to test?
Click to expand...
Click to collapse
I do not,
another thing that is strange, the music and video player of the rom, does not listen to the sound, in other players and youtube is heard excellent.
what happens will the LOS app have a problem?
Enviado desde mi K88 mediante Tapatalk
---------- Post added 10-18-2018 at 12:02 AM ---------- Previous post was 10-17-2018 at 11:53 PM ----------
but I really liked the ROM I can give it a daily use without problem
Enviado desde mi K88 mediante Tapatalk
juniorgerman said:
the wifi turns on well for me, I only have trouble connecting to hidden wifi networks
Enviado desde mi K88 mediante Tapatalk
Click to expand...
Click to collapse
I fixed it .. It was where I used wrong twrp and had to use su to make roms boot..
had to start fresh and its working awesome so far !
Thank you peeps !
I'd be happy to try a Nougat->Oreo upgrade (I don't care if I end up having to wipe), but I'm not sure what the procedure should be.
Should it be:
update TWRP using jasminetool
install zip and oreo gapps in TWRP WITHOUT running Wipe or Advanced Wipe?
Rapplerorica said:
I'd be happy to try a Nougat->Oreo upgrade (I don't care if I end up having to wipe), but I'm not sure what the procedure should be.
Should it be:
update TWRP using jasminetool
install zip and oreo gapps in TWRP WITHOUT running Wipe or Advanced Wipe?
Click to expand...
Click to collapse
the TWRP can update it from TWRP by selecting the image to flash partition recovery or with the jasminetool
WiFi is not working
Thank you for Oreo ROM but I can't turn on the wifi
Rapplerorica said:
I'd be happy to try a Nougat->Oreo upgrade (I don't care if I end up having to wipe), but I'm not sure what the procedure should be.
Should it be:
update TWRP using jasminetool
install zip and oreo gapps in TWRP WITHOUT running Wipe or Advanced Wipe?
Click to expand...
Click to collapse
The steps should be:
1. Update TWRP.
2. Flash the oreo rom.
3. Flash new gapps.
4. Reboot.
tdm said:
The steps should be:
1. Update TWRP.
2. Flash the oreo rom.
3. Flash new gapps.
4. Reboot.
Click to expand...
Click to collapse
yes i followed same steps but it is not working
---------- Post added at 01:45 PM ---------- Previous post was at 01:40 PM ----------
tdm said:
The steps should be:
1. Update TWRP.
2. Flash the oreo rom.
3. Flash new gapps.
4. Reboot.
Click to expand...
Click to collapse
i did not use jasmintool, just flash twrp v. 3230 by twrp v.3110 does that matter?
tjrgus5001 said:
yes i followed same steps but it is not working
---------- Post added at 01:45 PM ---------- Previous post was at 01:40 PM ----------
i did not use jasmintool, just flash twrp v. 3230 by twrp v.3110 does that matter?
Click to expand...
Click to collapse
It does not matter how you update recovery, any method works equally well.
I ran the update from Nougat and flashed nano gapps, and it did keep all apps and files. However, I had to uninstall and re-install all Google apps that didn't come included with the gapps, along with a handful of Play Store apps, otherwise they just hung and crashed. I tried wiping the cache/dalvik cache in TWRP, but that didn't fix the crashing. I'm totally fine with re-installing apps, but just a heads up for anyone else.
While wifi connects and works, I'm noticing that the connection does seem to drop out for a second here and there. The wifi icon in the status bar will show the "x" in the bottom corner and mobile data will turn on. I'll see if it still happens on my home wifi (currently on work wifi). LTE/cell service does seem to work still.
Thanks so much for your work getting Oreo on here. It seems just as stable as Nougat so far (hopefully the wifi issue is just a problem with work wifi). Looking forward to this reaching official LineageOS status!
---------- Post added at 11:27 AM ---------- Previous post was at 10:41 AM ----------
Checking things out some more, the only other issues I noticed are that LiveDisplay can't be turned on at all (none of the options in Settings stick, and the quick actions button is grayed out), and Netflix can't be installed (Your device isn't compatible with this version).
ambient display is not available either in this version, one of the options that I like ambient display and is not available in nougat or in oreo
Enviado desde mi K88 mediante Tapatalk
juniorgerman said:
ambient display is not available either in this version, one of the options that I like ambient display and is not available in nougat or in oreo
Enviado desde mi K88 mediante Tapatalk
Click to expand...
Click to collapse
Yes I know. It's on my list of things to fix.
i've tried clean flash many times(using pico gapps and nano gapps)but wifi still do not work
i hope it will be solved someday
Related
I'm so sorry but this thread has already moved to http://forum.xda-developers.com/redmi-note/development/rom-resurrection-remix-redmi-note-4g-t3393516 ...since I'm retired in few months ago ^_^
Thanks to @ashishkotnala29 for help me to continue dior project for Official Resurrection Remix ^_^
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
peepee999 said:
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
Click to expand...
Click to collapse
glad to hear that, on next build will came out for v5.6.6 .
will upload it ASAP
Sent from my HM NOTE 1LTE using Tapatalk
Wow so excited! Waiting patiently! Thank you
Sent from my HM NOTE 1LTE using Tapatalk
that facebook apk work?
So far it is a very nice rom in my use of it. Tested camera, flash, gps, speakers, notification lights, many apps (including installing facebook app and logging in, but not actually using it more than that), etc. So far so good. Everything seems to be working. Thank you very much msfkonsole for making it available.
(Edit: backlights on soft buttons are working fine; no problem.)
yeah,,facebook work fine..
the loud speaker when call/get call not loud as always..it seem normal or without use load speaker
Its good news.....thanx mate
Sent from my Redmi Note 3 using Tapatalk
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Fantastic ROM
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
I want to know how to download it?
Sent using XDA One
kul.rohan said:
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Click to expand...
Click to collapse
1. The Status bar is definitely transparent on my phone. (Did you do a clean install?)
2. I also haven't gotten the weather to work.
3. Lockscreen wallpaper does not change for me either.
I'd also like to be able to adjust the soft buttons backlight brightness like I could in CM12.1.
But all those are only very minor problems, and this is proving to be a very good rom for me.
---------- Post added at 02:37 PM ---------- Previous post was at 02:27 PM ----------
AdliHebat said:
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
Click to expand...
Click to collapse
Try this: https://mega.nz/#!I8FzHTiQ!ptfcpHmTpLo7l-xH_vDySpLVasaXDvaeyzAIT578Qjo If that doesn't work, maybe download it again and put it in the root of the internal memory. I don't know what else to suggest.
Edit: I just installed latest 5.6.6 using Philz Touch with rom in root folder of external SD card. No problem.
bingoyang said:
I want to know how to download it?
Sent using XDA One
Click to expand...
Click to collapse
Try this to get the newest version 5.6.6: https://basketbuild.com/devs/resurrectionremix/dior You will also need this kernel patch: https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip. Just flash the patch after your flash the rom.
nz_mincemeat said:
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Click to expand...
Click to collapse
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
Edit: reboot solved that problem, but I don't know why it happened in the first place.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
Nasrun said:
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Click to expand...
Click to collapse
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
twrock said:
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
Click to expand...
Click to collapse
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Nasrun said:
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Click to expand...
Click to collapse
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
twrock said:
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
Click to expand...
Click to collapse
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Nasrun said:
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Click to expand...
Click to collapse
Hmm, strange. This file, edgefix_20160403.zip, right?
I'm using CWM based Philz Touch Recovery, but I don't know if that is the issue or not. If you were able to flash the rom, I can't see why you can't flash the edgefix update.
I'm having a few weird troubles though. Twice today I had the screen freeze for a time, and then when it came back, it was jumping around as if an invisible finger was touching all over the screen randomly. I had to force a reboot both times. That's not a minor bug. Also, I've had it turn on in my pocket and start to do pocket-dialing. At least I can hear it when that starts. Is there a setting to eliminate pocket dialing?
Edit: Ah, I see that 20160406 is released. Maybe I'll give that a try and see if it still has those problems.
Hey everyone, the official nightlies are up for cm 14.1
https://download.cyanogenmod.org/?device=oneplus3
Nice, but I get a "Can't install this package on top of incompatible data" when flashing using TWRP.
I'm currently on 3.2.7, any clue?
Anyone know if the social app vídeo calls are already working?
how to activate VoLTE feature in this rom ?
---------- Post added at 11:26 AM ---------- Previous post was at 10:54 AM ----------
no recovery after installing :/
mks693 said:
how to activate VoLTE feature in this rom ?
---------- Post added at 11:26 AM ---------- Previous post was at 10:54 AM ----------
no recovery after installing :/
Click to expand...
Click to collapse
Read it is based on 3.5.5 firmware so a modified twrp is needed.
But anyways if you don't call it works because the incall speaker is not working.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
snippem said:
Read it is based on 3.5.5 firmware so a modified twrp is needed.
But anyways if you don't call it works because the incall speaker is not working.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Click to expand...
Click to collapse
Yeah, I figured it out eventually. I flashed twrp 3.0.2-22 through flashify. Confirming incall speaker not working.
mks693 said:
Yeah, I figured it out eventually. I flashed twrp 3.0.2-22 through flashify. Confirming incall speaker not working.
Click to expand...
Click to collapse
Where can I download this twrp version?
zsajak said:
Where can I download this twrp version?
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-3/how-to/rom-community-build-3-5-5-t3490939
download from 2nd post. flash it through img flash.
The phone is recharging but the icon wont show it.. Do somebody else also have the issue?
PuCiNhOOO said:
Anyone know if the social app vídeo calls are already working?
Click to expand...
Click to collapse
working fine!
Any additional bugs?
Crash said:
Any additional bugs?
Click to expand...
Click to collapse
List taken from official thread:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
My recovery has gonne... Anyone know what is the version of twrp to flash?
Also social apps vídeo calls are not working
PuCiNhOOO said:
My recovery has gonne... Anyone know what is the version of twrp to flash?
Also social apps vÃ?*deo calls are not working
Click to expand...
Click to collapse
Check back on page 1 for link for TWRP recovery that works
Crash said:
Any additional bugs?
Click to expand...
Click to collapse
For what it's worth, I keep getting the "CM Bug Reporter has crashed" pop-up every few hours.
Moderator Information,
Thread closed, There is a thread for this already here: Cyanogenmod Just Released an Experimental 14.1 Build for the OnePlus3
Good bye
Reserve
reserve
reserve 2
---------- Post added at 10:30 PM ---------- Previous post was at 10:16 PM ----------
reserve #3
Thanks a lot man! Ill test it right now!
I flashed the S6E+ boot img after flashing the rom but the soft keys are not working. I tried it twice with a full wipe
XDA_Waghmare said:
I flashed the S6E+ boot img after flashing the rom but the soft keys are not working. I tried it twice with a full wipe
Click to expand...
Click to collapse
What model do u have? I only have this tested on 928F
SafetyHazard said:
What model do u have? I only have this tested on 928F
Click to expand...
Click to collapse
I tried it on 982F as well
XDA_Waghmare said:
I tried it on 982F as well
Click to expand...
Click to collapse
I'm not sure then, I don't own an s6e+ but my testeres said they work many times
XDA_Waghmare said:
I tried it on 982F as well
Click to expand...
Click to collapse
I have also a 928F and I can confirm The Capacitive button work
You Should follow the instruction
-> Wipe
-> Install ROM
-> Install Kernel (as an IMG)
-> Install GAPPS
-> Root Supersu is better
and BOot your rom
follow the guide for Sim Error
and Voila
work on g9287?
lyonscl1121217 said:
work on g9287?
Click to expand...
Click to collapse
Not tested on anything other then G928f.
we would love it if you would test and tell us
G928L tested
Kings Android said:
G928L tested
Click to expand...
Click to collapse
Did you encounter any bugs? Could you give a bit more details?
Google Play Servce issues
I'm testing on G928G, everthing fine for now, including the mobile data, but i have issues with Gapps, i tried install 3 different Gapps, but all is force close the Google Play Service and another small services.
Does anyone have a link to a Gapps that work with Lineage 14.1 ??
** Sorry for my english.
cjunior_1091 said:
I'm testing on G928G, everthing fine for now, including the mobile data, but i have issues with Gapps, i tried install 3 different Gapps, but all is force close the Google Play Service and another small services.
Does anyone have a link to a Gapps that work with Lineage 14.1 ??
** Sorry for my english.
Click to expand...
Click to collapse
here the gapps
http://opengapps.org/
---------- Post added at 02:12 PM ---------- Previous post was at 02:07 PM ----------
so i tested the rom runs very good fingerprint and the stock samsung camera are the only things i miss..
battery life is okay is a very good port
sim fix and bluetooth in next update? i use this rom when it gets updates
Soo sweet to see AOSP Nougat on my phone! Everything's working fanfu***ngtastic! Only issue is my GPS doesn't work.
Thanks so much for this!
G928F
OpenGapps stock
gtaelbordo said:
here the gapps
http://opengapps.org/
---------- Post added at 02:12 PM ---------- Previous post was at 02:07 PM ----------
so i tested the rom runs very good fingerprint and the stock samsung camera are the only things i miss..
battery life is okay is a very good port
sim fix and bluetooth in next update? i use this rom when it gets updates
Click to expand...
Click to collapse
Don't expect quality . we may get close to it but definetly not exactly
SafetyHazard said:
Don't expect quality . we may get close to it but definetly not exactly
Click to expand...
Click to collapse
what? close to what? sry i dont understand
Gonna seem like a proper noob but how exactly do I flash kernel??
saxobully said:
Gonna seem like a proper noob but how exactly do I flash kernel??
Click to expand...
Click to collapse
In TWRP select install image its on the bottom when u press install
After browsing through the new Oreo threads, there were again a lot of users with issues related to new bootlaoder and firmware.
So to avoid that I tried installing the new Beta 25 without any firmware files only updating system and boot, and that seam to work just fine.
It was the same with back than fron android MM to N.
To install the image you need the new TWRP linked here: https://forum.xda-developers.com/showpost.php?p=74154185&postcount=37
But its enough to boot the new TWRP with fastboot it does nto have to be flashed.
Here is the Oxygen OS Beta 25 zip without firmware for OnePlus 3: https://www.androidfilehost.com/?fid=962021903579485163
Anyone tried this? It's just simple install oreo twrp over my standard twrp, and then just install the cooked oreo zip??
Sent from my ONEPLUS A3003 using Tapatalk
DavidXanatos said:
After browsing through the new Oreo threads, there were again a lot of users with issues related to new bootlaoder and firmware.
So to avoid that I tried installing the new Beta 25 without any firmware files only updating system and boot, and that seam to work just fine.
It was the same with back than fron android MM to N.
To install the image you need the new TWRP linked here: https://forum.xda-developers.com/showpost.php?p=74154185&postcount=37
But its enough to boot the new TWRP with fastboot it does nto have to be flashed.
Here is the Oxygen OS Beta 25 zip without firmware for OnePlus 3: https://www.androidfilehost.com/?fid=962021903579485163
Click to expand...
Click to collapse
as you haven't flashed Oreo Firmware is Fingerprint, Cellular Data, wifi etc working properly?
Yea I havn't noticed any issues till now, seams just fine.
Couldn't boot. Asking for password. Any solution?
5559anand said:
Couldn't boot. Asking for password. Any solution?
Click to expand...
Click to collapse
data was encrypted.follow this
weigeloveu said:
data was encrypted.follow this
Click to expand...
Click to collapse
Are this work?
xsetiadi said:
Are this work?
Click to expand...
Click to collapse
I flashed in this order . it worked for me
1. Oreo TWRP
2. Oreo Rom zip
3. Disable dm-verity zip
4. Supersu
xsetiadi said:
Are this work?
Click to expand...
Click to collapse
i haven''t try it yet,
---------- Post added at 11:22 PM ---------- Previous post was at 11:20 PM ----------
5559anand said:
I flashed in this order . it worked for me
1. Oreo TWRP
2. Oreo Rom zip
3. Disable dm-verity zip
4. Supersu
Click to expand...
Click to collapse
where could I found the dm-verity.zip and what is it ?
weigeloveu said:
i haven''t try it yet,
---------- Post added at 11:22 PM ---------- Previous post was at 11:20 PM ----------
where could I found the dm-verity.zip and what is it ?
Click to expand...
Click to collapse
I think it's this. There's a new post for Oreo tho (link)
vafac said:
I think it's this. There's a new post for Oreo tho (link)
Click to expand...
Click to collapse
thanks very much
The dm fix is necessary even to a decrypted phone? In order to follow your installation method?
Sent from my ONEPLUS A3003 using Tapatalk
A while ago, I unlocked my K20 Pro and flashed HAVOC OS 2.8 Custom ROM. At the begining,the Auto Rotation was not in option as it wasn't working and I thought it was a minor bug it would be fixed in the next build... But when I got sick of that and because of some other bugs, I headed to other Custom ROMs to see if it was going to be fixed... Unfortunately, in every single one of them(RR, PE), the problem is still present... Are you facing the same issue? Is it possible to get it fixed?
Edit:Flashed system.img + vendor.img + persist.img and after CrDroid with GAPPs! All sensors seem to be fixed except front pop-up camera plus the Bluetooth has issues(connects but no media output)...
Fixed:Good news everyone! As I was trying a lot of things, I ended up with the phone only booting to fastboot mode... No recovery was allowed to be flashed or booted unfortunately... So, I decided to bring it back to stock using Mi flash tool and the flashable ROM I chose for Mi flash from the link below! As I was on fastboot mode, I selected my device on Mi flash and also selected the extracted folder the flashable ROM(also the batch file flash_all down in the right corner, above selected the selected flash all dotted option... WARNING, DO NOT CHOOSE FLASH AND LOCK)... Then, I waited some time for the process to end and so it did(don't worry if there is any checkpoint error in the mi flash). When it boots up, you will see 3 buttons in Chinese... Hit the lower one(I tried all the first two but I think I had no touch on them).
After that do the regular setup chosing English language! I remember I was given an option to calibrate the front camera and it was then I heard some strange noises, like them you here when you try to force close the front camera by hand... Anyway, I opened the camera app after the setup completed and choose to calibrate the front camera! So it did! After that if you want to flash any custom ROM (of Android 9 based), you have to wipe dalvik/art cache and data only... Then try flashing the desired ROM and GAPPs... Once the process is finished, reboot again to recovery if you want to flash Magisk... Then boot normally into the ROM and you will notice all sensors are working perfectly!
David_#27 said:
A while ago, I unlocked my K20 Pro and flashed HAVOC OS 2.8 Custom ROM. At the begining,the Auto Rotation was not in option as it wasn't working and I thought it was a minor bug it would be fixed in the next build... But when I got sick of that and because of some other bugs, I headed to other Custom ROMs to see if it was going to be fixed... Unfortunately, in every single one of them(RR, PE), the problem is still present... Are you facing the same issue? Is it possible to get it fixed?
Click to expand...
Click to collapse
Did you check if device sensors aren't malfunctioning?
Sent from my Redmi K20 Pro using Tapatalk
Sukhi said:
Did you check if device sensors aren't malfunctioning?
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
How can I do that? Besides, I have never dropped my phone and Auto Rotation is still functioning on MIUI...
David_#27 said:
How can I do that? Besides, I have never dropped my phone and Auto Rotation is still functioning on MIUI...
Click to expand...
Click to collapse
Download Sensor Box from Play store and check for Accelerometer, Gyroscope and Magnetic Sensor and check if you're able to see values for X,Y,Z axis.
Sent from my Redmi K20 Pro using Tapatalk
David_#27 said:
A while ago, I unlocked my K20 Pro and flashed HAVOC OS 2.8 Custom ROM. At the begining,the Auto Rotation was not in option as it wasn't working and I thought it was a minor bug it would be fixed in the next build... But when I got sick of that and because of some other bugs, I headed to other Custom ROMs to see if it was going to be fixed... Unfortunately, in every single one of them(RR, PE), the problem is still present... Are you facing the same issue? Is it possible to get it fixed?
Click to expand...
Click to collapse
No idea about RR or PE, but auto rotation works just fine on crDroid and I'm 99% sure that it worked on Syberia as well.
It really does sound like an issue with your device
Nimueh said:
No idea about RR or PE, but auto rotation works just fine on crDroid and I'm 99% sure that it worked on Syberia as well.
It really does sound like an issue with your device
Click to expand...
Click to collapse
Sukhi said:
Download Sensor Box from Play store and check for Accelerometer, Gyroscope and Magnetic Sensor and check if you're able to see values for X,Y,Z axis.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
I don't think it is an issue with my device... There is no way those sensors got destroyed after unlocking the bootloader, because before I do that, they were all functioning very well on MIUI(and also I had proper auto rotation)!
David_#27 said:
A while ago, I unlocked my K20 Pro and flashed HAVOC OS 2.8 Custom ROM. At the begining,the Auto Rotation was not in option as it wasn't working and I thought it was a minor bug it would be fixed in the next build... But when I got sick of that and because of some other bugs, I headed to other Custom ROMs to see if it was going to be fixed... Unfortunately, in every single one of them(RR, PE), the problem is still present... Are you facing the same issue? Is it possible to get it fixed?
Click to expand...
Click to collapse
Brother your persist partition got corrupt...
The same thing happened to me while installing that rom
You have to reflash persist.img in persist partition to make your sensors work again.. flashing other roms won't help in this case
Even flashing miui via recovery won't help in this case ...
Either you flash the fastboot rom or you can reflash the persist.img via twrp (L.R. team twrp
This will fix your problem for sure
Wow! I don't know what to say... Finally someone who knows what's going on with this device! Thank you very much for your assistance!
David_#27 said:
Wow! I don't know what to say... Finally someone who knows what's going on with this device! Thank you very much for your assistance!
Click to expand...
Click to collapse
Never mind do let me know if u face any problem while flashing persist....
rez321 said:
Never mind do let me know if u face any problem while flashing persist....
Click to expand...
Click to collapse
Aidid flash it but, there was no difference... Auto rotation is still not functioning...?
David_#27 said:
Aidid flash it but, there was no difference... Auto rotation is still not functioning...?
Click to expand...
Click to collapse
From where did u get that persist.img file..
And which recovery did u use?
Also if u want then I can provide u the file
And the recovery
And also the steps
As because I faced the same problem that u mentioned ..after hours of googling I was finally able to solve the problem
rez321 said:
From where did u get that persist.img file..
And which recovery did u use?
Click to expand...
Click to collapse
I extracted the latest one from there: https://mifirm.net/model/raphael.ttt
I also used OrangeFox recovery!
David_#27 said:
I extracted the latest one from there: https://mifirm.net/model/raphael.ttt
I also used OrangeFox recovery!
Click to expand...
Click to collapse
Use LR twrp recovery
And if u want then I can provide u that persist.img file
Then while installing u will get a list of partitions select persist and then continue flashing
That's it
rez321 said:
Use LR twrp recovery
And if u want then I can provide u that persist.img file
Then while installing u will get a list of partitions select persist and then continue flashing
That's it
Click to expand...
Click to collapse
Can you provide me a link please for the LR recovery?
David_#27 said:
Can you provide me a link please for the LR recovery?
Click to expand...
Click to collapse
https://forum.xda-developers.com/k2...wzsx150s-twrp-status-phh-gsis-t3939325/page18
---------- Post added at 06:49 PM ---------- Previous post was at 06:45 PM ----------
David_#27 said:
Can you provide me a link please for the LR recovery?
Click to expand...
Click to collapse
Sorry this is the link
https://github.com/phhusson/treble_experimentations/wiki/Xiaomi-Redmi-K20-Pro
---------- Post added at 06:55 PM ---------- Previous post was at 06:49 PM ----------
rez321 said:
https://forum.xda-developers.com/k2...wzsx150s-twrp-status-phh-gsis-t3939325/page18
---------- Post added at 06:49 PM ---------- Previous post was at 06:45 PM ----------
Sorry this is the link
https://github.com/phhusson/treble_experimentations/wiki/Xiaomi-Redmi-K20-Pro
Click to expand...
Click to collapse
Please search in Google Lr team twrp recovery for k20 pro
Because both the links that I've given are wrong somehow...
rez321 said:
https://forum.xda-developers.com/k2...wzsx150s-twrp-status-phh-gsis-t3939325/page18
---------- Post added at 06:49 PM ---------- Previous post was at 06:45 PM ----------
Sorry this is the link
https://github.com/phhusson/treble_experimentations/wiki/Xiaomi-Redmi-K20-Pro
---------- Post added at 06:55 PM ---------- Previous post was at 06:49 PM ----------
Please search in Google Lr team twrp recovery for k20 pro
Because both the links that I've given are wrong somehow...
Click to expand...
Click to collapse
Yep I searched for it and I ended up in the first one...
I did flash the LR TWRP and the persist.img but nothing happened once again... I think that I should wipe everything and flash again: system.img + vendor.img + persist.img and after that flash the desired Android 9.0 ROM... What do you think?
I'm having the same problem. What MIUI ROM did you have before flashing any custom ROM?
MIUI 10! Unfortunately I don't remember which version but the one it came out of the box (updated).
Isley_ said:
I'm having the same problem. What MIUI ROM did you have before flashing any custom ROM?
Click to expand...
Click to collapse
MIUI 10! Unfortunately I don't remember which version but the one it came out of the box (updated).
David_#27 said:
MIUI 10! Unfortunately I don't remember which version but the one it came out of the box (updated).
Click to expand...
Click to collapse
What persist did you flash? From what ROM? China, Global etc and what version?