Related
Hey everybody I rooted my device this morning, and I was setting everything up again since it gets wiped during the process. So finally I come and try to login in to Snapchat and it says something similar to "log in has failed please try again later" anybody have this problem or a way to fix it? Thanks in advance!
Snapchat checks for root and purposely prevents you from logging in if it find it. If you rooted with SuperSU, try installing Chainfire's SUHide. Otherwise, if you rooted with Magisk, enable MagiskHide in Magisk Manager.
I usually unroot with SU and login while unrooted, then flash whatever SU zip used to root again. It should work and you'll stay logged in.
martinsavvy said:
I usually unroot with SU and login while unrooted, then flash whatever SU zip used to root again. It should work and you'll stay logged in.
Click to expand...
Click to collapse
so i just do the full unroot option, sign in, then just flash the SU again?
sakumaxp said:
so i just do the full unroot option, sign in, then just flash the SU again?
Click to expand...
Click to collapse
Yeah that's what works for me.
martinsavvy said:
Yeah that's what works for me.
Click to expand...
Click to collapse
OMG thank you so much that was so easy!!!!
magisk is better though because you can still use android pay and mobile banking applications.
If I throw on a custom ROM after wiping will I need to do this process again?
Yes. Unless the custom ROM has built-in root, you will have to flash SuperSU or Magisk every time you flash a ROM (including updating the same ROM to a newer version). Flashing a ROM replaces the files required for root in the /system or /boot partition.
Anova's Origin said:
Yes. Unless the custom ROM has built-in root, you will have to flash SuperSU or Magisk every time you flash a ROM (including updating the same ROM to a newer version). Flashing a ROM replaces the files required for root in the /system or /boot partition.
Click to expand...
Click to collapse
I shouldnt brick if i have to loose root and reflash super SU when I'm running a rom right? Sorry for all the questions
Suddenly losing root without a reasonable explanation would be a cause for concern and should merit further investigation.
However, simply flashing SuperSU after flashing a ROM (dirty or clean flash) shouldn't cause any issues.
Anova's Origin said:
Suddenly losing root without a reasonable explanation would be a cause for concern and should merit further investigation.
However, simply flashing SuperSU after flashing a ROM (dirty or clean flash) shouldn't cause any issues.
Click to expand...
Click to collapse
Yeah cos I would need to flash the ROM, then sign in to Snapchat, then go back to TWRP and flash super SU
Honestly, I would just recommend you to use Magisk to root. You can have it hide both root and itself from apps like Snapchat. Better yet, since Magisk Manager is not a system app, it will survive updates through dirty flashes. This means that after the initial set up, any time you dirty flash a ROM and then Magisk immediately afterwards, root is already set up and hidden from Snapchat the first time you boot up.
Also, be careful with flashing a ROM without rooting immediately. ROMs like OOS will either replace TWRP with stock recovery or trigger dm-verity if you don't root immediately after clean flashing.
Anova's Origin said:
Honestly, I would just recommend you to use Magisk to root. You can have it hide both root and itself from apps like Snapchat. Better yet, since Magisk Manager is not a system app, it will survive updates through dirty flashes. This means that after the initial set up, any time you flash a ROM and then Magisk immediately afterwards, root is already set up and hidden from Snapchat the first time you boot up.
Also, be careful with flashing a ROM without rooting immediately. You might trigger dm-verity if you clean flash a ROM like OOS without rooting before booting.
Click to expand...
Click to collapse
So I just have to download magisk manager and it should re-do everything for me if I understand correctly right?
sakumaxp said:
So I just have to download magisk manager and it should re-do everything for me if I understand correctly right?
Click to expand...
Click to collapse
You will have to remove all traces of SuperSU before flashing Magisk. If Magisk detects systemless SuperSU already present on your phone, it won't root it with its own method (and therefore cannot hide root from other apps). The easiest way to install Magisk over SuperSU is just to dirty flash your current ROM and then immediately flash Magisk v11.1 (don't forget to wipe cache/dalvik). After you boot, you will have to install the Magisk Manager app from the playstore if the Magisk.zip didn't already do so automatically. Then enable Magisk Hide and reboot your phone. Root should be hidden now. You will have to regrant root permissions for all of your root apps.
Anova's Origin said:
You will have to remove all traces of SuperSU before flashing Magisk. If Magisk detects systemless SuperSU already present on your phone, it won't root it with its own method (and therefore cannot hide root from other apps). The easiest way to install Magisk over SuperSU is just to dirty flash your current ROM and then immediately flash Magisk v11.1 (don't forget to wipe cache/dalvik). After you boot, you will have to install the Magisk Manager app from the playstore if the Magisk.zip didn't already do so automatically. Then enable Magisk Hide and reboot your phone. Root should be hidden now. You will have to regrant root permissions for all of your root apps.
Click to expand...
Click to collapse
I'm on stock ROM, so I guess I can go into super su and loose root then download magisk and get it that way
Thanks mate, it took forever to find this solution, it worked!
I use SU and it was simple to "unroot" from within the SU# app
1. settings scroll down to the "cleanup" section, select full unroot, accept all the warning messages, the phone will reboot into recovery and then reboot the phone after it finishes. Your phone may cycle through the reboot process a couple of times
2. log back into your phone, then you can log into the Snapchat app.
3. now you can re-root your phone, if you want to.
Cheers.
Hello, I am currently rooted on stock oos 4.0.3, with latest TWRP and super su free v2.79, can anyone help me out and tell me how to switch to magisk please, thank you!
Can I just use super su full unroot option then flash magisk?
Either reflash the original boot.img or download the unsu script from https://forum.xda-developers.com/showpost.php?p=63615067, then flash magisk again.
palesaint said:
Either reflash the original boot.img or download the unsu script from https://forum.xda-developers.com/showpost.php?p=63615067, then flash magisk again.
Click to expand...
Click to collapse
so flash unsu, then flash magisk. simple?
Dr Grato said:
so flash unsu, then flash magisk. simple?
Click to expand...
Click to collapse
If you use the unSU script the process is:
unSU
stock boot image
Magisk
This method did not work for me.
I am on KETAN n10 and initially, viper did not work. I installed magisk but that didn't fix it. nor the meefik busy box. So i decided to uninstall magisk and go back to superSU and it magically worked...
I unrooted from SuperSU itself like shown on the app's forum I believe. It rebooted my phone, I went into recovery first and then just flashed the latest magisk and made the switch :laugh:
SourPower said:
I unrooted from SuperSU itself like shown on the app's forum I believe. It rebooted my phone, I went into recovery first and then just flashed the latest magisk and made the switch :laugh:
Click to expand...
Click to collapse
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
JG420 said:
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
Click to expand...
Click to collapse
If there's a proper backup of the boot image for the SuperSU app's full unroot option to restore, then that process should work perfectly (I've done it on a few devices myself). It's when it can't properly restore the boot image you might have issues and you'll have to do it yourself.
Take a look in the Magisk Troubleshooting guide, under "Moving from another systemless root solution to MagiskSU".
The nuclear method might be, to just flash the full stock OOS zip (can flash in TWRP) which will unroot and restore the boot.img (and everything else!). Then immediately flash Magisk before rebooting (so have the Magisk zip on the phone before updating). This should fully remove SuperSU, install Magisk, and keep TWRP on the phone.
Seeing as the original poster is still on OOS 4.0.3, you may want to update, anyway!
JG420 said:
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
Click to expand...
Click to collapse
I've done this on my 3t but I do have a G3 coincidentally lol, but yes I unrooted from su, it restarted my phone, before booting back into the system I went in twrp right away and then flashed magisk.
There are two options given in the SuperSU app, one is clean up to switch to a different SU app and the other is to permanently unroot. Which option is better?
hypothrax said:
There are two options given in the SuperSU app, one is clean up to switch to a different SU app and the other is to permanently unroot. Which option is better?
Click to expand...
Click to collapse
I chose the Full Unroot option. Then flashed magisk. Worked perfectly.
Use the full unroot option. Catch here is that you might get dm-verity warning. It won't affect the phone in anyway but Android Pay might not work and you will see the warning for 5 seconds, everytime you restart the phone.
Thanks so much for ths thread. I am on Resurrection Remix OS and inititally installed SuperSU over Magisk (which came with the ROM). I decided that I wanted to use Magisk instead and followed the instructions in this thread and it worked a treat.
Solved: See this post.
After the recent SuperSU 2.81 update sent my Z3C into a boot-loop I came across a few comments on this XDA article saying that MagiskSU is the way to go these days.
Now, I gather from this thread that the best way to root is to just install stock Marshmallow and run the provided installer then flash a root binary via TWRP.
However, the FAQ in the official Magisk post states:
Sony Devices: If you're using stock kernel, it is using Sony's special ELF format. Magisk will repack it to standard AOSP format, which requires your device to be unlocked.
Click to expand...
Click to collapse
So, if the bootloader needs to be unlocked to install Magisk, does that mean you can't have the phone's DRM features active? Or is it possible to restore the DRM stuff after Magisk has been installed (assuming you've backed up the DRM keys)?
Also, does the fact that Magisk repacks the kernel mean SafetyNet will always fail on a Sony device, regardless of Magisk Hide being enabled?
I'm on latest MM and no problems with new SuperSU. All latest updates installed and 2.81 and 2.82 are working well.
Chamelleon said:
I'm on latest MM and no problems with new SuperSU. All latest updates installed and 2.81 and 2.82 are working well.
Click to expand...
Click to collapse
I guess you must be lucky then since Chainfire has advised Xperia users to stay on 2.79, as per the news article I linked.
Still, regardless of whether SuperSU works for some people or not, I'd still like to find out if MagiskSU is a viable alternative for Sony devices and what the correct procedure is to install it and retain all the phone's features.
Did Your SuperSU app was converted to system app? Mine wasn't, maybe thats an answer.
Chamelleon said:
Did Your SuperSU app was converted to system app? Mine wasn't, maybe thats an answer.
Click to expand...
Click to collapse
Possibly; can't remember to be honest. Anyway, flashing back to 2.79 fixed the boot loop and I've disabled auto-update until Chainfire says otherwise.
I still want to learn about Magisk though; not keep discussing SuperSU
I found a few bits of info on the subject:
RootKernel can apparently repack the stock kernel with a DRM fix so that all the DRM features can be restored with an unlocked bootloader.
BootBridge can install Magisk without repacking the ELF kernel in AOSP format, which the author says is preferable. However, BootBridge itself requires an unlocked bootloader so the DRM is still an issue I guess... <-- This is only meant for specific older devices; not the Z3C.
Magisk Patch claims Magisk won't work without disabling Sony RIC and provides a fix if you haven't used RootKernel already.
Trying to piece it all together is a little confusing so if anyone has actually done it, I'd be interested to hear from you.
Do we even need the SuperSU updates? 2.79 works fine for me without any issues plus the new versions are maintained by the Chinese company (I'm using some different version compiled by Chainfire himself). The only problem is the update notification in Play Store tho....
nogaff said:
After the recent SuperSU 2.81 update sent my Z3C into a boot-loop I came across a few comments on this XDA article saying that MagiskSU is the way to go these days.
Now, I gather from this thread that the best way to root is to just install stock Marshmallow and run the provided installer then flash a root binary via TWRP.
However, the FAQ in the official Magisk post states:
So, if the bootloader needs to be unlocked to install Magisk, does that mean you can't have the phone's DRM features active? Or is it possible to restore the DRM stuff after Magisk has been installed (assuming you've backed up the DRM keys)?
Also, does the fact that Magisk repacks the kernel mean SafetyNet will always fail on a Sony device, regardless of Magisk Hide being enabled?
Click to expand...
Click to collapse
actually, i have my DRM partition and Magisk on my z3c UB. Here is what i did, first i did patch boot.img with magisk and then used ta-poc tool to restore my TA-backed up partition. oh! magisk hide works properly as well giving me full access to SafetyNet.
espaciosalter20 said:
first i did patch boot.img with magisk and then used ta-poc tool to restore my TA-backed up partition
Click to expand...
Click to collapse
I finally got a chance to try this out and I'm not having much success to be honest.
I'm starting off with an unlocked bootloader and flashing stock MM 23.5.A.1.291, then flashing TWRP.
In TWRP, the current version of Magisk (v14.0) refuses to install; it just complains about Sony ELF32 format and instructs me to use BootBridge, which is only supposed to be required for older devices like the Z2.
Anyway, I tried installing Magisk via BootBridge and it claims to have installed successfully, but then Magisk Manager says Magisk is not installed when I boot into Android (yes, I've rebooted a couple of times as well).
Next, I started over from the beginning and tried Magisk v13.3 instead, which at least begins to install, but then fails to patch the boot image.
Does anyone have a working method they could describe here?
Solution
I figured it all out by myself in the end. For anyone else having trouble, here's what I did:
Made sure I had a backup of my DRM keys!!! I already had one from when I first rooted my phone on KitKat, but I decided to make another backup using Universal TA Backup v2, just in case anything was wrong with the original.
Obtained the official Marshmallow 23.5.A.1.291 firmware from XperiFirm, created a .ftf file with Flashtool, unlocked the bootloader on my device and flashed the .ftf file via Flashtool.
Flashed TWRP custom recovery via fastboot.
Extracted the stock kernel.elf boot image from the .ftf file using Flashtool.
Ran ta_poc on the kernel.elf file, answering "Y" when prompted to disable Sony RIC*. This produced a repacked boot.img with the DRM features added back in.
Copied the boot.img to my SD card.
Booted to Android and installed the Magisk Manager apk.
Used the "Install" button in Magisk Manager and selected the boot.img on my SD card.
Noted the location of the patched_boot.img that Magisk Manager created, then booted into TWRP and flashed patched_boot.img.
Booted back into Android and checked Magisk Manager status.
My device is now fully rooted, has all the DRM features intact and is passing all SafetyNet checks.
As an alternative to steps 7-9, you could simply flash the boot.img from step 6 via TWRP and then also flash the Magisk zip file via TWRP. You'd end up with exactly the same result at step 10.
I believe you could even complete the installation without TWRP or any custom recovery at all, by using Magisk Manager to create a patched_boot.img, then copying it to your PC and flashing it via fastboot.
* Disabling Sony RIC in my boot.img was what solved all my problems. This thread suggests you don't need to do that any more, but I couldn't get it to work without doing so.
Hi, I recently installed magisk 14, I get it to work. However, somehow it broke my wifi and LTE functionality. DNS NOT FOUND. I have a m4 aqua with 6.0.1 ver.1.33. Do you have any idea what could be the cause of this problem?
Enviado desde mi E2306 mediante Tapatalk
any know magisk for Z3 Compact Docomo MM 6.1 Bootloader Lock ?
Hi nogaff,
I tried your solution but there are two difficulties I can't resolve:
1) Where can I download a valid TWRP image for the Sony Xperia Z4 Tablet? My search in the internet was without success, and TWRP doesn't seem to support this device.
2) I used the same procedure to patch the kernel:
TA_POC'd the kernel with disabling DM-verity and disabling Sony-RIC
copied this image to a SD-card
put the SD-card into my SGP771
patched this image with Magisk 22.1 (this version of Magisk supports officially my Android 7.1.1)
flashed this image using FlashTool (because I don't have a TWRP recovery for the SGP771) - flashing ended without error!
BUTThe SGP771 stucks in a boot loop!!!Can you tell me if I forgot something?
Regards
Ansgar
I have a blu r1 hd custom build v6.5 I have tried to install magisk manager (i have rooted with super su) but it fails every time I try I get an error message I'm the app and in TWRP I just want to know if anybody else has this problem and if there is any way to solve it
Jô$èph D said:
I have a blu r1 hd custom build v6.5 I have tried to install magisk manager (i have rooted with super su) but it fails every time I try I get an error message I'm the app and in TWRP I just want to know if anybody else has this problem and if there is any way to solve it
Click to expand...
Click to collapse
I believe Magisk dropped SuperSu support at some point before v13. Magisk now includes its own systemless root solution, so SuperSu is not needed. Try uninstalling Magisk and SuperSu and flashing the latest 13.3 zip.
freespeechdev said:
I believe Magisk dropped SuperSu support at some point before v13. Magisk now includes its own systemless root solution, so SuperSu is not needed. Try uninstalling Magisk and SuperSu and flashing the latest 13.3 zip.
Click to expand...
Click to collapse
Ok then ill give it a shot
freespeechdev said:
I believe Magisk dropped SuperSu support at some point before v13. Magisk now includes its own systemless root solution, so SuperSu is not needed. Try uninstalling Magisk and SuperSu and flashing the latest 13.3 zip.
Click to expand...
Click to collapse
I need to get stock boot img I don't have it pls help
Jô$èph D said:
I need to get stock boot img I don't have it pls help
Click to expand...
Click to collapse
Two options:
If you have a pre-supersu/Magisk backup, restore it (at least the boot part).
If you don't have a backup (I encourage you to make them in the future...):
You need to go to the forum post with the fixed prime 6.5 zip downloads. Download the ~1gb zip, unzip it, and grab the boot.img from there. Flash it in twrp by going to install, install image (bottom right). Choose boot. When the flash finishes, reboot to recovery and flash Magisk.
freespeechdev said:
Two options:
If you have a pre-supersu/Magisk backup, restore it (at least the boot part).
If you don't have a backup (I encourage you to make them in the future...):
You need to go to the forum post with the fixed prime 6.5 zip downloads. Download the ~1gb zip, unzip it, and grab the boot.img from there. Flash it in twrp by going to install, install image (bottom right). Choose boot. When the flash finishes, reboot to recovery and flash Magisk.
Click to expand...
Click to collapse
Can you pls link me the post for that file
freespeechdev said:
Two options:
If you have a pre-supersu/Magisk backup, restore it (at least the boot part).
If you don't have a backup (I encourage you to make them in the future...):
You need to go to the forum post with the fixed prime 6.5 zip downloads. Download the ~1gb zip, unzip it, and grab the boot.img from there. Flash it in twrp by going to install, install image (bottom right). Choose boot. When the flash finishes, reboot to recovery and flash Magisk.
Click to expand...
Click to collapse
Never mind man. I can't say thank you enough I found the stock ROM with the info you gave me. Flashing boot.img was successful and so was flashing the Magisk.zip again thanks
Jô$èph D said:
Never mind man. I can't say thank you enough I found the stock ROM with the info you gave me. Flashing boot.img was successful and so was flashing the Magisk.zip again thanks and I will stay active on this and other threads
Click to expand...
Click to collapse
Sure thing. See you around!
Why would someone use Magisk instead of traditional root? Are there some apps that you need to use that won't work on the rooted phone? I guess that there are a few, like snap chat and maybe Netflix but I don't use those on the Blu R1 HD.
I followed Colton's original root thread and while he, at first, included Magisk, he later advised switching to the non-Magisk root and I did. What would I gain by switching back to Magisk?
yaconsult said:
Why would someone use Magisk instead of traditional root? Are there some apps that you need to use that won't work on the rooted phone? I guess that there are a few, like snap chat and maybe Netflix but I don't use those on the Blu R1 HD.
I followed Colton's original root thread and while he, at first, included Magisk, he later advised switching to the non-Magisk root and I did. What would I gain by switching back to Magisk?
Click to expand...
Click to collapse
I wanted to use systemless xposed framework because the official version is not supported on my device. Also I wanted to use the modules that are specifically for magisk
yaconsult said:
Why would someone use Magisk instead of traditional root? Are there some apps that you need to use that won't work on the rooted phone? I guess that there are a few, like snap chat and maybe Netflix but I don't use those on the Blu R1 HD.
I followed Colton's original root thread and while he, at first, included Magisk, he later advised switching to the non-Magisk root and I did. What would I gain by switching back to Magisk?
Click to expand...
Click to collapse
Systemless xposed does not work either found this out earlier today device would not boot after installation of xposed through magisk
Ah, that would be a problem for me. I wouldn't want to use a phone without xposed. I have to have all the tweaking and customizations available in gravitybox and a few other modules.
So what will you do now? Give up xposed or Magisk? Or try to find or wait for a version of xposed that works on Magish?
It was a long time ago, but I think I remember running into problems running xposed on Magisk and Colton provided some helpful advice in his original thread about reflashing the rom, getting root, then installing xposed - he had seperate threads for those.
yaconsult said:
Ah, that would be a problem for me. I wouldn't want to use a phone without xposed. I have to have all the tweaking and customizations available in gravitybox and a few other modules.
So what will you do now? Give up xposed or Magisk? Or try to find or wait for a version of xposed that works on Magish?
It was a long time ago, but I think I remember running into problems running xposed on Magisk and Colton provided some helpful advice in his original thread about reflashing the rom, getting root, then installing xposed - he had seperate threads for those.
Click to expand...
Click to collapse
I will have to see if it works when a new version of magisk is launched.
Hi guys I'm a beginner so sorry if i did so many stupid mistakes.
I succesfully rooted my Xiaomi Mi A1 with Magisk about 3 months ago and tried to ignore OTA updates until today
I tried to follow a guide in github which i can't link because i'm new in this foru.
Since i rooted with Magisk i followed the first method
I "restored images" then tried to update but still doesn't work
Then i decided to reboot and then tried to update but it doesn't work
So then i tried to uninstall Magisk by dragging it from the home Just like any other app but didn't work
Then proceded to delete all Magisk folders from my downloads but the update still doesn't work
Then desperately tried to reinstall Magisk but it isn't the v16 version so i tried to install it(i don't know which file i need to select so i tried selcting any image files) says it worked but it didn't so i rebooted and tried over and now i'm stuck with incomplete rooting, non-working Magisk and no OTA update.
I'd like to update OTA and bring back Magisk and root.
Ibra2800 said:
Hi guys I'm a beginner so sorry if i did so many stupid mistakes.
I succesfully rooted my Xiaomi Mi A1 with Magisk about 3 months ago and tried to ignore OTA updates until today
I tried to follow a guide in github which i can't link because i'm new in this foru.
Since i rooted with Magisk i followed the first method
I "restored images" then tried to update but still doesn't work
Then i decided to reboot and then tried to update but it doesn't work
So then i tried to uninstall Magisk by dragging it from the home Just like any other app but didn't work
Then proceded to delete all Magisk folders from my downloads but the update still doesn't work
Then desperately tried to reinstall Magisk but it isn't the v16 version so i tried to install it(i don't know which file i need to select so i tried selcting any image files) says it worked but it didn't so i rebooted and tried over and now i'm stuck with incomplete rooting, non-working Magisk and no OTA update.
I'd like to update OTA and bring back Magisk and root.
Click to expand...
Click to collapse
Why you didn just flash Magisk uninstaller. Zip file?
Poslato sa VTR-L29 uz pomoć Tapatoka
urbanboymne said:
Why you didn just flash Magisk uninstaller. Zip file?
Poslato sa VTR-L29 uz pomoć Tapatoka
Click to expand...
Click to collapse
Sorry, i thought that i could still keep Magisk and root intact if i didn't use the uninstaller.
Ibra2800 said:
Sorry, i thought that i could still keep Magisk and root intact if i didn't use the uninstaller.
Click to expand...
Click to collapse
No you cant. You are lucky you didnt brick your phone. Flash uninstaller and than try OTA update. Download TWRP for your phone/new rom and flash working Magisk again and root phone. Is simple. Of course, if you are on TWTP you will be unable to OTA update your phone. You need stock recovery or wait for ZIP flash file of newes rom
Poslato sa VTR-L29 uz pomoć Tapatoka
@Ibra2800 There's no need to uninstall Magisk to update with an OTA. There are however a few prerequisites that need to be fulfilled:
You need to have the stock boot image installed. That can be done by using the restore images option in the Manager or manually flashing the boot.img file with fastboot or equivalent.
You need to have the stock recovery installed. This means the OTA will fail if you have TWRP or another custom recovery installed. Either keep the stock recovery installed and only boot the TWRP image when necessary (the fastboot boot command), or you make sure you restore the stock recovery image when you need to update.
You also need to have a few important partitions on your device untouched. Those include (but may not be limited to) /system and /vendor. If you've so much as mounted these as rw, the OTA will fail. This one can be tricky, because if an app has root access it can easily do this without you noticing.
If you manage to fulfill the above, you should be able to update your device. If the A/B method from @topjohnwu's OTA tips didn't work, use the general case instructions instead.
Right now, it sounds like you need to start from scratch though...
If you can get a hold of a full firmware file for your device, you might be better of flashing that instead. Or, wait for a flashable update, as stated above. And if you want to reinstall Magisk you might have to first uninstall it, to start clean. Use this uninstaller.
Thanks for trying to help me
Sorry to ask but i just can't wrap my head around it, how am i supposed to use the uninstaller, what are the steps ? Also i only user Magisk so i think i don't have any custom recovery and don't know what's TWRP purpose.
Ibra2800 said:
Sorry to ask but i just can't wrap my head around it, how am i supposed to use the uninstaller, what are the steps ? Also i only user Magisk so i think i don't have any custom recovery and don't know what's TWRP purpose.
Click to expand...
Click to collapse
The uninstaller is a zip that you flash in a custom recovery (i.e. TWRP) to uninstall Magisk completely. You should also be able to use the "Complete uninstall" option in the Magisk Manager.
TWRP is a custom recovery that you can use to make backups of your device partitions (so you don't loose any data if anything goes wrong, it's highly recommended to make regular backups in some way) and install custom ROMs and other modifications to your device. You can either install it permanently or just boot it whenever you need it (there are likely gonna be guides about this in your device's forum).
Since you seem to be quite new at this, I would suggest that you take some time to browse through your device's forum and familarise yourself with things like ADB, fastboot, custom recoveries, custom kernels, ROMs, etc. And if you have more questions like this, it's often best to ask them in the device forum, since there sometimes are device specific things that need to be done for everything to work right.