Hello! I would like to know if we can share the accesories between those phones, specifically a tempered glass and a case. Thanks in advance!
Hi, I can't believe that nobody answer/know your question Tujachevski.
I want to know the same. I have a very bad tempered glass which doesn't stick in the borders. I want to change it, but I don't find a good one.
Yes; they are compatible; I have a Z17 Lite and I am using on it a tempered glass and a case designer for Z17
Hi, thank's a lot for answer, but the Z 17 Lite has curved edges, the temper glass that you has bought is curved also?
And, do the holes match?
Again thank's for your time.
---------- Post added at 11:51 PM ---------- Previous post was at 11:48 PM ----------
Hi, thank's a lot for answer, but the Z 17 Lite has curved edges, the temper glass that you has bought is curved also?
And, do the holes match?
Do you remember the link or any Z 17 will be ok?
I have a Z 17 Lite too.
Again thank's for your time.
Related
Hi
How will effect wood and ... body on warming of device and durability ?!
Wood will warm up and break late but little crack in normal wood will expand more after days
x102x96x said:
hi
how will effect wood and ... Body on warming of device and durability ?!
Wood will warm up and break late but little crack in normal wood will expand more after days
Click to expand...
Click to collapse
gooooooooooood
This wood isn't just some wood plank, it's treated so that it doesn't suck water in it or just crack and stuff, it will be the most durable material because plastic cracks and gets hotter easier and aluminium (if a model made of it will be made) stretches on impact and gets really hot
---------- Post added at 07:12 PM ---------- Previous post was at 07:10 PM ----------
aqeel2saf said:
gooooooooooood
Click to expand...
Click to collapse
Nice answer to his question. Welcome to XDA, here we answer questions in Q&A
I would think that a wood back panel would survive much better a drop than plastic. If it scratches or dents just take some fine sandpaper to it.
Is there any screen glass protector in Ebay that don't make the "Halo" effect on side edges?.
I'd like to have some links.
Thanks in advance.
Interesting. I want to know too
Most of them don't fit. It's been really hard to find one that fits.
Sent from my LG-D800 using Tapatalk 2
Superlolz said:
Is there any screen glass protector in Ebay that don't make the "Halo" effect on side edges?.
I'd like to have some links.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58480449&postcount=1266
http://www.ebay.com/itm/121291192573
The one give linked is one you've tried and verified that is a smaller version?
Sent from my LG-D800 using XDA Free mobile app
no more 100% fit g2 srceen. it becuase side is edges.
Sent from my iPhone using Tapatalk
I bought the Nillkin Glass Screen protector... once it arrives I'll test and post results here...
---------- Post added at 02:04 PM ---------- Previous post was at 02:04 PM ----------
[/COLOR]
Marcb said:
I bought the Nillkin Glass Screen protector... once it arrives I'll test and post results here...
Click to expand...
Click to collapse
Can u tell me how is it i am planning to buy one
hdas said:
---------- Post added at 02:04 PM ---------- Previous post was at 02:04 PM ----------
[/COLOR]
Can u tell me how is it i am planning to buy one
Click to expand...
Click to collapse
I have one Nillkin very thin, it's unbelievable good, I tried to scratch it with my Swedish knife and no way I could
The "halo" effect is just advertisement bro, mine at least don't have this effect but I would enjoy to own a TRON glass protector.
I have the Nillkin Glass Screen protector and sometimes the touch dont responde, but...that´s normal, my girlfriend have a LG L90 and the Nillkin Glass Screen protector and sometimes happens the same
Hey guys,
Which tempered glass do you use for your A7000 or can you suggest me a good one...?
Thank you
which you buy.
All are good......make sure the one u are buying is edges are curved and not pointed....... Also keep one thing in mind..... A tempered glass will heat up your device at all times even when u are doing some small petty thing.... Like chatting
seumina said:
which you buy.
Click to expand...
Click to collapse
I bought one from Pudini. Given the price (around 500 INR) it just sucks. It is a fingerprint magnet although it says anti fingerprint. I tell just go for a normal tempered glass available in local stores. It does the job. And almost all the tempered glass today comes with 8H-9H hardness.
samsexy98 said:
I bought one from Pudini. Given the price (around 500 INR) it just sucks. It is a fingerprint magnet although it says anti fingerprint. I tell just go for a normal tempered glass available in local stores. It does the job. And almost all the tempered glass today comes with 8H-9H hardness.
Click to expand...
Click to collapse
True.....
---------- Post added at 07:48 AM ---------- Previous post was at 07:48 AM ----------
And it should not cost that much....
Is there any chance that a tempered glass protector will work with the new in-display fingerprint reader? It's touch sensitive so maybe a screen protector could stop it to work properly?!
Any idea about that?
I hope the Mi8 EE will get produced soon and in big charges, everyone I know is waiting for the new fingerprint technology!
Very good question ... I wanted to order a glass and cover already but i didn't found anything for the explorer edition.
---------- Post added at 03:38 PM ---------- Previous post was at 03:30 PM ----------
The Huawei Mate RS Porsche Design has the same fingerprint scanner and for this device you can order different h9 glasses so i think there should be some protection options for the explorer edition too.
Let us get some ideas of how certain cases look on the phone
I use this case from "UPaitou": https://de.aliexpress.com/item/UPai...108.1000016.1.50247782eixQM3&isOrigTitle=true
It's very cheap, but it feels good! Furthermore it's very thin and has a nice texture/material.
I like it!
I have already checked a different matte case - in about 2-3 months this matt surface will begin to wipe - from the corners. I definitely recommend the MSVII case: https://www.aliexpress.com/af/mi-a2...26012939&origin=n&catId=0&isViewCP=y&jump=afs
The case is durable and perfectly fitted.
I had this company on previous Xiaomi phones and it was always the best choice.
Im using Nillkin Nature TPU.
On the previous Phone Redmi 4x i had MSVII and i do not recommend it becouse he scratched my phone (aluminium back).
d3tr0 said:
On the previous Phone Redmi 4x i had MSVII and i do not recommend it becouse he scratched my phone (aluminium back).
Click to expand...
Click to collapse
The reason for scratching was not the case but the sand that got under it. In this you will have the same if the sand gets in the back part.
I'm using Spigen's Rugged Armor, it's super tight so no dirt/sand/dust between phone and the case. I found it in the other store for circa $14, on the official website is for $20.
---------- Post added at 09:55 AM ---------- Previous post was at 09:52 AM ----------
@krzygaj I had the MSVII case on my Redmi 4X, after 4-5 months it looked like **** and when my phone fell it broke because the plastic is really thin, delicate and inflexible.
AutoFocus case
Hello,
i bought mine (daynew) on amazon for 5€, its not the best one by far but its getting the job done
Here we go - got ours from Amazaon, shipped free @ $9 USD - click for link
It's a good case with tempered screen protector, worked fine together as a unit - should minimize the odds for scratches, nicks & minor dents ... didn't want to start using the new Mi A2 Lite without a case or cover, until I look around for something better and/or as a spare/extra backup - could probably get something nicer & cheaper from eBay/Gearbest or Ali* - shipping time is longer, so this is a trade-off.