my motorola device is bricked and i need help - Moto G6 Questions & Answers

ok... i was just browsing the web on my phone then i sat it down for a bit... then, when i came back, it was in bootloader... i tried to start it and it said "Boot Failed: Failed to initialize partition table" so, what can i do to fix it... it is a motorola g6, XT1925-6 and i tried flashing it and it still didnt work... dont have an unlocked bootloader because i cant unlock it because the device is bricked. can someone please help?

DerpyPlayz71 said:
ok... i was just browsing the web on my phone then i sat it down for a bit... then, when i came back, it was in bootloader... i tried to start it and it said "Boot Failed: Failed to initialize partition table" so, what can i do to fix it... it is a motorola g6, XT1925-6 and i tried flashing it and it still didnt work... dont have an unlocked bootloader because i cant unlock it because the device is bricked. can someone please help?
Click to expand...
Click to collapse
If you download the latest stock firmware I believe it ends with -92 you should be able to reflash the stock firmware. I would try just flashing the GPT.bin file per the restore stock instructions, and then attempt to boot. They're official files so they should flash regardless of bootloader status

Related

XT1225 - comes into fastboot before connecting

Friends, I have a XT1225 with locked BOOTLOEADER and without ROOT, and I was with SOAK TEST 5.0.2 V3 installed and tried to downgrade to 4.4.4 kitkat, and used the RSD to this, gave an error cell continued functioning but every time I turn it and turn again, he first comes into fastboot, and I choose START and the phone connects normally like to know how I solve this problem without unlocking the bootloader and without ROOT?
Leandro_grilo said:
Friends, I have a XT1225 with locked BOOTLOEADER and without ROOT, and I was with SOAK TEST 5.0.2 V3 installed and tried to downgrade to 4.4.4 kitkat, and used the RSD to this, gave an error cell continued functioning but every time I turn it and turn again, he first comes into fastboot, and I choose START and the phone connects normally like to know how I solve this problem without unlocking the bootloader and without ROOT?
Click to expand...
Click to collapse
You should not take a soak test if you have locked bootloader and don't want to unlock it because you never can go back
so now I can only solve this problem if I unlock the bootloader?
Leandro_grilo said:
so now I can only solve this problem if I unlock the bootloader?
Click to expand...
Click to collapse
If you unlock the bootloader you can go back to kitkat
Leandro_grilo said:
so now I can only solve this problem if I unlock the bootloader?
Click to expand...
Click to collapse
As others have said you can only downgrade if you unlock your bootloader. So when you tried flashing the firmware it would have failed, because it failed it did not clear a flag that it set in the fastboot mode. Long story short to get your phone booting normally type the following while your phone is at the fastboot screen:
fastboot oem fb_mode_clear
It will then boot normally again.
Steve-x said:
As others have said you can only downgrade if you unlock your bootloader. So when you tried flashing the firmware it would have failed, because it failed it did not clear a flag that it set in the fastboot mode. Long story short to get your phone booting normally type the following while your phone is at the fastboot screen:
fastboot oem fb_mode_clear
It will then boot normally again.
Click to expand...
Click to collapse
thank you did as you said and I just solve the problem, it was very simple. I am very happy with your help Steve-x
but what about the User "Jaocagomez," I do not go out on the SOAK TEST?
When it launches new updates should come to me automatically? or should I do something every time?
Friends help me !!!
I deleted the cache partition and the cell has canceled .
I'm trying to recover but with RSD of the following error: "failed flashing process 3/17 partition gpt.bin phone returned FAIL . "
How do to recover my player? Perhaps it is only via ADB . Does anyone have the procedure ?
evandrovendas said:
Friends help me !!!
I deleted the cache partition and the cell has canceled .
I'm trying to recover but with RSD of the following error: "failed flashing process 3/17 partition gpt.bin phone returned FAIL . "
How do to recover my player? Perhaps it is only via ADB . Does anyone have the procedure ?
Click to expand...
Click to collapse
There is a guide here to follow. In general

Brick "Service Required Code Corrupt"

Hi dose somebody now how to remove this brick i tried everything ?
and this dose not worked http://forum.xda-developers.com/razr...5?goto=newpost
I think when you have the service code error there is nothing you can do.
But you still get into bootloader, correct?
Have you tried manually flash the recovery / gpl / motoboot etc. once at a time?
If you cant get into bootloader anymore, try this, but only then
dagoban said:
I think when you have the service code error there is nothing you can do.
But you still get into bootloader, correct?
Have you tried manually flash the recovery / gpl / motoboot etc. once at a time?
If you cant get into bootloader anymore, try this, but only then
Click to expand...
Click to collapse
I can not get to bootloaderI tried every thing its stuck on Service Required code corrupt message.
What you mean about manually flash the recovery - you mean over the bootloader fastboot flash recovery recovery.img ?
No i can not, can only connect as MEDFIELD
miky03 said:
I can not get to bootloaderI tried every thing its stuck on Service Required code corrupt message.
What you mean about manually flash the recovery - you mean over the bootloader fastboot flash recovery recovery.img ?
No i can not, can only connect as MEDFIELD
Click to expand...
Click to collapse
Sorry, forgot to include the link: http://forum.xda-developers.com/razr-i/help/help-unbrick-completely-unmodified-razr-t2980659
If you cant get into the bootloader, it means you are not into fastboot mode, which means you will not be able to flash anything (bootloader, recovery, system partition)
If this is the case, then do this http://forum.xda-developers.com/razr-i/help/help-unbrick-completely-unmodified-razr-t2980659
If you successfully flash it but still your phone is not working, then you can throw away your phone, it is bricked beyond good and evil. Happened to me, too, not even Motorola could repair it then. If you are still in warranty, send it to Moto and you get a new device.
dagoban said:
Sorry, forgot to include the link: http://forum.xda-developers.com/razr-i/help/help-unbrick-completely-unmodified-razr-t2980659
If you cant get into the bootloader, it means you are not into fastboot mode, which means you will not be able to flash anything (bootloader, recovery, system partition)
If this is the case, then do this http://forum.xda-developers.com/razr-i/help/help-unbrick-completely-unmodified-razr-t2980659
If you successfully flash it but still your phone is not working, then you can throw away your phone, it is bricked beyond good and evil. Happened to me, too, not even Motorola could repair it then. If you are still in warranty, send it to Moto and you get a new device.
Click to expand...
Click to collapse
I tried everything my razr i still Hardbricked
now i want to tray this method:
set PACKAGE_DIR=unbrick
set FWDNX=--fwdnx %PACKAGE_DIR%\dnx
set FWIMAGE=--fwimage %PACKAGE_DIR%\ifwi
set OSDNX=--osdnx %PACKAGE_DIR%\dnx
set OSIMAGE=--osimage %PACKAGE_DIR%\motoboot
unbrick\xfstk-dldr-solo.exe %FWDNX% %FWIMAGE% %OSDNX% %OSIMAGE% --verbose
Question where i can get this files from (dnx, ifiw, motoboot) ?
I had CM11 before then downgrade to ICS 4.0.4. then used wrong script for rooting then got "Service Required code corrupt message".
miky03 said:
]
Click to expand...
Click to collapse
Please also don't post the same question in several threads, we try to keep it as clean as possible here

Moto x 2014 XT1092 stuck in boot

So recently i unlocked my bootloader so i could root my XT1092. But without knowing, i booted a file for an older android version while i was on 6.0. So then i was stuck at the end of the boot. Somebody told me to flash original stock files from motorola site. Did that but now i'm stuck at the 'bootloader unlocked' warning, and when i trie to charge it stays at battery low and it doesn't charge. Also when i trie to lock the bootloader again it says:
C:\android-sdk\platform-tools>fastboot oem lock
...
(bootloader) FAIL: Please run fastboot oem lock begin first!
(bootloader) sst lock failure!
OKAY [ 0.057s]
finished. total time: 0.063s
What should i do? PLEASE SOMEBODY HELP!!!
Sorry can't help..... But will you pls tell me what wrong step did you go through so that I can avoid them ( I need to unlock my X2)... Thanks!
had no problems with unlocking the bootloader. I flashed a twrp on the device and when i tried to get into recovery it said: no command
So i used another method that said i needed to boot a file but i forgot to read the comments and it was only for the moto x 2014 that are running on KITKAT. I was running on 6.0 and i saw that right after i booted the file. So always read the comments! That's the advice i can give. If you find a proper method please tell me too pls so i know what to do if i find a solution.
Ok, i fixed it i had some problems flashing the system img. but its solved.
OK i got the phone back working but it doesn't recognize my sim-card anymore and my internet speed is slow af. I got 101 kb/s for downloading and 22kb/s uploading speed. Sometimes i see a toast that says that it was unable to download the appendix?! What do i have to do to fix it?
benjg_ said:
OK i got the phone back working but it doesn't recognize my sim-card anymore and my internet speed is slow af. I got 101 kb/s for downloading and 22kb/s uploading speed. Sometimes i see a toast that says that it was unable to download the appendix?! What do i have to do to fix it?
Click to expand...
Click to collapse
You might have flashed an image for other variant. Now, flash the modems for your variant, you can find them in the threads! :fingers-crossed:
Could be true. Maybe it would work again if i install cyanogenmod 13?

Semi working PRA-LX1C432

Hi !
I bought in January the nice P8 Lite 2017 and received a PRA-LX1C432 (dual sim europe no carrier).
It was with Android 7.0 and EMUI 5.0 and i wanted to root it.
I did it well, and was with the firmware PRA-LXA1C432B182 in stock and rooted with the tuto from this thread
https://forum.xda-developers.com/p8...ck-rom-huawei-prague-pra-xxxc432b182-t3727816
and uninstalled TWRP to put back stock recovery.
Later, I wanted to unroot my phone, and that's where things went wrong. I tried to do it with the superSU option and after a hard reset it was working and not rooted, but i'd still have the message "this phone can't be trust" so i tried to relock the bootloader and it did hard reset the phone again and now, i'm stuck with a phone that can send sms or go through the internet with LTE, but can't access fm, camera, google music, nfc is going on and off, calls don't work, etc... In dev options, Allow OEM unlock is greyed and I can't change anything. Phone is recognized by computer and I can acces memory of the phone.
I can hard reset it won't change, i ca also accessFastboot, or recovery or eRecovery, but in Fastboot mode it says "PHONE Unlock FRP Lock" and from my computer i can't do anything : if i try to flash twrp with fastboot command, i have the message "FAILED remote the command is not allowed", if i try to lock/unlock/relock bootloader it says "FAILED remote root type is risk".
Clearly, I don't know what to do. I'm used with rooting/unrooting smartphones from different brands (Samsung, LG, Sony, Huawei...), even though i'm far from being a master, and using Fastboot/ADB commands, but... I don't know.
If someone has any idea, I'm taking. I'm thinking about dload method but, of cooourse, I do NOT have a sdcard, so it's the last thing i would have tried from all i have seen on xda and elsewhere.
Thanks for reading and taking time to answer and help me, and sorry for not perfect english, i'm french but trying my best !
Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.
Fr0nK said:
Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.
Click to expand...
Click to collapse
I can't, it says that it can not get package infos from server. :/
MrCrumble34 said:
I can't, it says that it can not get package infos from server. :/
Click to expand...
Click to collapse
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.
Fr0nK said:
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.
Click to expand...
Click to collapse
TWRP is not installed, and I can't flash it in any way. Fastboot says "FAILED (remote : command not allowed)" if I try flashing recovery or system or anything. It also says "FAILED (remote : root type is risk) if I try to lock/unlock/relock the bootloader.
Ok, I'm actually trying something. I plugged the phone into my computer, and HiSuite told there was an update available for my phone, so I just clicked on it. It's doing right now, I will edit my post after it has finished (for good or bad).
EDIT : Ok, si it did work ! My phone is now on PRA-LX1C432B194, everything is working, not rooted. I relocked the bootloader with Fastboot, the command did work (guess I can root it again if I need now). But I think I'll leave it like that ^^'
Allow OEM unlock isn't greyed anymore, I came back to the original state of my phone but with an update not (yet) available in my country, no more "Device can't be trusted" message. Like if nothing had ever happened (expect it will be written PHONE Relocked).
This phone is really sensitive, haha^^
But as anyway I made it
Thanks anyway for trying to help !

looking for the correct firmware for the xt1922-9

I bricked my device when I unlocked my bootloader and I have tried the firmwares on here though adb, the systems flash fine but the boot image fails the bootloader fails and gpt fails. when the phone is done flashing it boots up but I don't have data I don't have Wi-Fi and I get an error that says daxuser failed, I no there has got to be a solution to this problem I got the phone at Best Buy unlocked if anyone knows anything will how I can go about getting this phone back up please let me know

Categories

Resources