Database Develop

Big Problem with my 4X

Hi, I was trying to install the MultiRom , and i installed the other kernel, the Recovery and the MultiRom Zip, but when i start up CM, its says "Updating Android", and it freezes...
I had a great idea; reinstall everything with a KDZ, but the new LGMobile Support Tool doesn't install the drivers properly, so i can't do anything
Anyone can help me? I don't have a recovery and i cant start up android
Thanks you so much
PS: Sorry about my VERY bad english

Garapablo said:
Hi, I was trying to install the MultiRom , and i installed the other kernel, the Recovery and the MultiRom Zip, but when i start up CM, its says "Updating Android", and it freezes...
I had a great idea; reinstall everything with a KDZ, but the new LGMobile Support Tool doesn't install the drivers properly, so i can't do anything
Anyone can help me? I don't have a recovery and i cant start up android
Thanks you so much
PS: Sorry about my VERY bad english
Click to expand...
Click to collapse
First of all - wrong forum, please post your problems/questions here:
http://forum.xda-developers.com/forumdisplay.php?f=1651
Second, go trough this tutorial and you should be fine:
with pictures:
http://forum.xda-developers.com/showthread.php?t=2069723
without:
http://forum.xda-developers.com/showthread.php?t=1861854
And if you really need to rollback to 4.1, here is how:
http://forum.xda-developers.com/showthread.php?t=2180688
That's all.

JAsko_san said:
First of all - wrong forum, please post your problems/questions here:
http://forum.xda-developers.com/forumdisplay.php?f=1651
Second, go trough this tutorial and you should be fine:
with pictures:
http://forum.xda-developers.com/showthread.php?t=2069723
without:
http://forum.xda-developers.com/showthread.php?t=1861854
And if you really need to rollback to 4.1, here is how:
http://forum.xda-developers.com/showthread.php?t=2180688
That's all.
Click to expand...
Click to collapse
True, wrong section, but i use the driver utility, but now it update and it looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And sorry

Another info: When i out the USB, it says the device don't work, but i tried to install drivers from the LG Tool but it doen't work, anyone can help me?

Bricked my OP3T and unable to unbrick now.

Hi All,
I had bricked my phone while updating from OTA. It is not now booting up at all, not in Recovery/Fastboot too. I tried unbrick method from the below guide.
https://forums.oneplus.com/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3t.725029/
But I am running into issues while downloading cache.img as it failing again and again. I am facing issues as
FirehoseCheckRSP Failed, Errno: 258, I have attached the screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried multiple port in my both laptops i.e. Windows 10 - 64bits and Windows 7 - 32bits. But all in vain.
Please help. I am in no position to buy a new phone right now :crying::crying::crying:. Thanks!

You are kidding right?
You are posting at XDA and instead of searching here for the guides, you are checking at other forums?
Here you are:
https://r.tapatalk.com/shareLink?ur...share_tid=3515306&share_fid=3793&share_type=t
You are welcome
Sent from my ONEPLUS A3003 using Tapatalk

RASTAVIPER said:
You are kidding right?
You are posting at XDA and instead of searching here for the guides, you are checking at other forums?
Here you are:
https://r.tapatalk.com/shareLink?ur...share_tid=3515306&share_fid=3793&share_type=t
You are welcome
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Thanks for you response. I pasted a wrong link in my earlier post. I used the step from XDA too, including the one you shared. But ran into same issue. I have tried almost all the unbrick guides available but it is not going beyond "Downloading cache.img".
I used two version of stock ROMs i.e. "OnePlus3T_28_A.23_161027" and "OnePlus3T_28_A.041_170208" but both didn't work.
Is there anything which I should be doing differently. Thanks!

akhil1_mishra said:
Thanks for you response. I pasted a wrong link in my earlier post. I used the step from XDA too, including the one you shared. But ran into same issue. I have tried almost all the unbrick guides available but it is not going beyond "Downloading cache.img".
I used two version of stock ROMs i.e. "OnePlus3T_28_A.23_161027" and "OnePlus3T_28_A.041_170208" but both didn't work.
Is there anything which I should be doing differently. Thanks!
Click to expand...
Click to collapse
The full stock rom is something like: OnePlus3TOxygen_28_OTA_066_all_1807192258_abaeb8b
Sent from my ONEPLUS A3003 using Tapatalk

keep trying i had the same issue with my op3t just but i managed to fix it by updating the driver and don't forgot to use the cable that comes with the phone and while flashing try holding the volume up until it's done ! it worked for me i hope it'll work for u

FRP UNLOCK, SM-A305G (please get the approval to use factory binaries PIT) help...

Hello friends, I am from Latin America, I have the SM-305G device, the phone is bought from a telephone company, I had problems with FRP, I used ODIN, downloading the combination software, but the error is always the same: please get the approval to use factory binaries (pit), I have downloaded the pit file from a server, it has not worked, also extracted through MIRACLE BOX, but the problem persists always, I also used the Z3x tool, but I did not get results, now I come here to that can give me a hand and thus be able to solve this.
Photo link with a problem:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

malocchi said:
Hello friends, I am from Latin America, I have the SM-305G device, the phone is bought from a telephone company, I had problems with FRP, I used ODIN, downloading the combination software, but the error is always the same: please get the approval to use factory binaries (pit), I have downloaded the pit file from a server, it has not worked, also extracted through MIRACLE BOX, but the problem persists always, I also used the Z3x tool, but I did not get results, now I come here to that can give me a hand and thus be able to solve this.
Photo link with a problem:
Click to expand...
Click to collapse
Hi there, were you able to fix the " please get the approval to use factory binaries" problem? I am in the same predicament trying to do a combination firmware with odin. and same error pups up. Please let me know if you were able to figure it, Thanks

chalanero11 said:
Hi there, were you able to fix the " please get the approval to use factory binaries" problem? I am in the same predicament trying to do a combination firmware with odin. and same error pups up. Please let me know if you were able to figure it, Thanks
Click to expand...
Click to collapse
I;m in the same boat

Hardbrick for RPX31.Q2-58-17-4-1.

Hello!
I`m from Russia, forgive me errors.
I made a brick my Moto G9Play and I want to find hardbrick for last flash RPX31.Q2-58-17-4-1.
On the site https://mirrors.lolinet.com/firmware/moto/guamp/blankflash/
found hardbrick only for rpx31.q2-58-16, but can't enter to fastboot.
The loader is unlocked.
Where I can find new hardbrick?

dairyrom said:
Hello!
I`m from Russia, forgive me errors.
I made a brick my Moto G9Play and I want to find hardbrick for last flash RPX31.Q2-58-17-4-1.
On the site https://mirrors.lolinet.com/firmware/moto/guamp/blankflash/
found hardbrick only for rpx31.q2-58-16, but can't enter to fastboot.
The loader is unlocked.
Where I can find new hardbrick?
Click to expand...
Click to collapse
blank flash is not for fastboot.
Qualcomm USB Drivers
Is my device in EDL Mode?

sd_shadow said:
blank flash is not for fastboot.
Qualcomm USB Drivers
Is my device in EDL Mode?
Click to expand...
Click to collapse
Hello! Thank's, I have a black screen and "9008"
Please tell me next steps for making working device.
Blankflash from old version firmware is not help for me...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello!
Did you manage to solve the problem with your device?
I have the same problem and I can't find the solution anywhere

dairyrom said:
Hello! Thank's, I have a black screen and "9008"
Please tell me next steps for making working device.
Blankflash from old version firmware is not help for me... View attachment 5518399View attachment 5518407
Click to expand...
Click to collapse
Hello!
Did you manage to solve the problem with your device?
I have the same problem and I can't find the solution anywhere

joaopedrouba said:
Hello!
Did you manage to solve the problem with your device?
I have the same problem and I can't find the solution anywhere
Click to expand...
Click to collapse
Hello. No, I could not solve the problem. One person restored the firmware through blanflash using files from https://mirrors.lolinet.com/firmware/, but I did not succeed. You may need an updated blankflash.

Hello.
I have the same problem.
I used the Blankflash RPX31.Q2-58-16 but it gives me an error when installing.
Isn't there a more updated blankflash?
Thank you

Question Zenfon 8 and a newbie

I unlocked my new Zenfone8. then I had flashed the new E-OS system. and somehow I put it in my pocket wrong, and now the phone doesn't tell me it's unlocked! and it only goes to the green START screen Can someone help me?
How can I unlock the bootloader again? I would love to be able to bring it back to its original state!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

So.. you got a NEW Zenfone 8. Decided to unlock right away, then flash E-OS (never heard of this before), and even put in your pocket wrong. And now you want to unlock it again? And let us not forget you're a newbie.
I'm not trolling but next time always read how to revert back or somekind of backup plan when you do some flashing. You didn't even mentioned any way you tried to get it working again.
Guys pls help this poor guy.

ronzky321 said:
So.. you got a NEW Zenfone 8. Decided to unlock right away, then flash E-OS (never heard of this before), and even put in your pocket wrong. And now you want to unlock it again? And let us not forget you're a newbie.
I'm not trolling but next time always read how to revert back or somekind of backup plan when you do some flashing. You didn't even mentioned any way you tried to get it working again.
Guys pls help this poor guy.
Click to expand...
Click to collapse
hello.
this e/OS (https://doc.e.foundation/devices) is a siple system but fairly new.
yes, that would have been smart with the backup... So with adb I can't get into the cell phone, I can connect with fastboot. this E/OS only runs when the phone is unlocked.. I previously unlocked it with the original tool from Asus (unlock.apk) But if the cell phone is lying on its side in the suitcase and accidentally presses all 3 buttons at the same time, the cell phone will be locked again! I didn't know that... and can you unlock this phone with fastboot? or with programs completely flash on original? Best Regards!

Hi, I can suggest you try the instructions in this post, the install of /e/OS most likely failed and now it doesnt get past the bootloader. The device is probably fine. https://forum.xda-developers.com/t/full-recover-to-stock-if-things-went-really-bad.4337467/

worked!
but important! You first have to deactivate the digital driver signature in Windows 10!! otherwise driver fragments will be missing when flashing!!
Had to flash twice, and the procedure worked!
many thanks to everyone!
PS: what tool do you use for your backups?

lulu1975 said:
worked!
but important! You first have to deactivate the digital driver signature in Windows 10!! otherwise driver fragments will be missing when flashing!!
Had to flash twice, and the procedure worked!
many thanks to everyone!
PS: what tool do you use for your backups?
Click to expand...
Click to collapse
I personally do not store anything really important on my phone, so no backups apart from Google photos and manually uploading my important files.