Disclaimer:This software comes with no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device.
Note:Supported on Stock EMUI only.
This twrp is based on P20 Pro. All credits goes to @a1Pha!
NOTE: You have to unlock your bootloader in order to flash the twrp.
Download and Installation* Download twrp recovery
* Start your device in fastboot mode
* Install the recovery using the following command:
Code:
fastboot flash recovery_ramdisk [name of the file].img --> ex: fastboot flash recovery_ramdisk twrp_cornell-3.2.2.img
* Restart with this command:
Code:
fastboot reboot
* As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP,so the device will boot to TWRP.This is to avoid that the device boot to OS,overwritting TWRP recovery.
Backup & Restore = working
Backup of Data doesnt work . Rest everything works!
OTG connection = working
Decrypting data is not currently supported
Everyone has to wipe the phone before flashing!!
Note:Tested by only one person and we expect members with unlock codes to test and report . We see a great development for this device in near future. So guys your help is needed.
Credits:
@shubhambhise: For help with buliding twrp
@Allexexpert : For his motivation and help with sources
@Quantumkk123: For guidance
@adnanahmad1786: Thanks a lot for testing the twrp
Download Links:
twrp_3.2.2-r23.img
If you wanna help us by donating do pm me.
thanks your hard work... but unnessesary this custom recovery...official firmware is very best... no need custom rom
Sent from my HUAWEI COR-L29 using XDA Labs
In 1-2 years there will be no update to the next android version. Then its fine to have an working rwrp
Gesendet von meinem COR-L29 mit Tapatalk
eisele.f said:
In 1-2 years there will be no update to the next android version. Then its fine to have an working rwrp
Gesendet von meinem COR-L29 mit Tapatalk
Click to expand...
Click to collapse
The TWRP is here, remains the problem of blocked Bootloaders and Huawei no longer leaves the key, so the custom recovery will be a dream for so many
I think there will come a solution for that problem
Gesendet von meinem COR-L29 mit Tapatalk
eisele.f said:
I think there will come a solution for that problem
Gesendet von meinem COR-L29 mit Tapatalk
Click to expand...
Click to collapse
Hopefully
spityu85hun said:
thanks your hard work... but unnessesary this custom recovery...official firmware is very best... no need custom rom
Click to expand...
Click to collapse
Oh my God will you just please be quiet we get it you think stock is better but in case you haven't noticed this is an xda developers community where people develop stuff to enhance the users experience if you just like plain stock...why are you even here? This is a community where we can get the most of our devices and have unlimited amount of customizations
lollo.21 said:
The TWRP is here, remains the problem of blocked Bootloaders and Huawei no longer leaves the key, so the custom recovery will be a dream for so many
Click to expand...
Click to collapse
So for unlocking u can do it through funkyhuawei which will cost you. Or go to authorised service centre and get your bootloader unlocked.
Srijith Bharadwaj said:
So for unlocking u can do it through funkyhuawei which will cost you. Or go to authorised service centre and get your bootloader unlocked.
Click to expand...
Click to collapse
Pay to unlock a bootloader? Never Eheh
A good suggestion, I turn to a Huawei center in my city!
A curiosity, doing the root OTA updates will not work, as it will do to update since there are no custom ROMs?
Quantumkk123 said:
Oh my God will you just please be quiet we get it you think stock is better but in case you haven't noticed this is an xda developers community where people develop stuff to enhance the users experience if you just like plain stock...why are you even here? This is a community where we can get the most of our devices and have unlimited amount of customizations
Click to expand...
Click to collapse
oh,my,god... who are you to command me to silence? you are not a last one!only user on xda! you can ask for it!okay?
know where you are in the community...
see, a sign of good intent, I will be silent, but do not believe it because you wrote it.
other: when is it expected custom system too?
Sent from my HUAWEI COR-L29 using XDA Labs
spityu85hun said:
oh,my,god... who are you to command me to silence? you are not a last one!only user on xda! you can ask for it!okay?
know where you are in the community...
see, a sign of good intent, I will be silent, but do not believe it because you wrote it.
other: when is it expected custom system too?
Click to expand...
Click to collapse
I thought you weren't a fan of custom system
Quantumkk123 said:
I thought you weren't a fan of custom system
Click to expand...
Click to collapse
I did not say I hate or fancy it, but it is unnecessary because it is very good to be a factory system :laugh:
Sent from my HUAWEI COR-L29 using XDA Labs
spityu85hun said:
I did not say I hate or fancy it, but it is unnecessary because it is very good to be a factory system :laugh:
Click to expand...
Click to collapse
I never said you hated it or not fancied I said you werent a fan which translates to your not particularly keen on it which you are therefore just accept it please
Quantumkk123 said:
I never said you hated it or not fancied I said you werent a fan which translates to your not particularly keen on it which you are therefore just accept it please
Click to expand...
Click to collapse
Sent from my HUAWEI COR-L29 using XDA Labs
can it be used to flash Magisk without wiping data?
Srijith Bharadwaj said:
Disclaimer:This software comes with no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device.
Note:Supported on Stock EMUI only.
This twrp is based on P20 Pro. All credits goes to @a1Pha!
NOTE: You have to unlock your bootloader in order to flash the twrp.
Download and Installation
* Download twrp recovery
* Start your device in fastboot mode
* Install the recovery using the following command:
* Restart with this command:
* As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP,so the device will boot to TWRP.This is to avoid that the device boot to OS,overwritting TWRP recovery.
Backup & Restore = working
Backup of Data doesnt work . Rest everything works!
OTG connection = working
Decrypting data is not currently supported
Everyone has to wipe the phone before flashing!!
Note:Tested by only one person and we expect members with unlock codes to test and report . We see a great development for this device in near future. So guys your help is needed.
Credits:
@shubhambhise: For help with buliding twrp
@Allexexpert : For his motivation and help with sources
@Quantumkk123: For guidance
@adnanahmad1786: Thanks a lot for testing the twrp
Download Links:
twrp_3.2.2-r23.img
If you wanna help us by donating do pm me.
Click to expand...
Click to collapse
Magisk will be working?
matipole said:
Magisk will be working?
Click to expand...
Click to collapse
Yes magisk is working !!!! Without any issues !!!!
adnanahmad1786 said:
Yes magisk is working !!!! Without any issues !!!!
Click to expand...
Click to collapse
Could you give screenshot? I can't believe!
adnanahmad1786 said:
Yes magisk is working !!!! Without any issues !!!!
Click to expand...
Click to collapse
I would really like to try it, but I must first trove a way to unlock bootloader without paying anyone on principle
Is there any way to flash 9.0 using TWRP?
Related
Be sure You have unlocked Your bootloader before.
I don't have this variant of P8, it was already tested but still please report any issues and I'll try to fix them.
Remember it's for Kirin version only.
INSTALLATION:
Just flash it via Fastboot and You should be fine. There's also a possibility to flash it via 'dd' in adb shell, it works too.
DOWNLOADS:
Go!!!!!
CHANGELOG:
v1:
- Initial release
v2:
-fixed resolution
-fixed brightness settings
CREDITS:
- TeamWin for making TWRP, of course
- @jniklast for custom graphics.c for newer Kirin SoCs
Source:Github
Update: The version for Kirin has been tested and it works, so You can flash it and test more without being afraid that You would break anything Meanwhile I'm still waiting for the report from Qcom variant user.
Kirin version is okay, but Qcom version made issues so I won't release it.
OP has rectified the issue.
So thread cleaned and lets stick to development talk now. :good:
Thanks,
Darth
Forum Moderator
Edit: Also, the report button is all you need in the future. No need for drama in the threads. Or use pm's.
New version is up.
v2:
-fixed resolution
-fixed brightness settings
Works fine for Kirin, just finished my first nand for ALE-L21
Gesendet von meinem ALE-L21 mit Tapatalk
---------- Post added at 08:25 PM ---------- Previous post was at 07:38 PM ----------
forgot to tell that I used flashify
Gesendet von meinem SM-T520 mit Tapatalk
thanks for your work, for now all ok
Is reboot to system key working? Mine didnt reboot, just turned off. Need to switch it on manually.
I,m using quick boot (root) and it works
Gesendet von meinem SM-T520 mit Tapatalk
any one plz explain how i flash it
i have p8lite unlocked +rooted
Napst3r88 said:
any one plz explain how i flash it
i have p8lite unlocked +rooted
Click to expand...
Click to collapse
Fastboot, dd method or just Flashify app from Play Store.
Thanks alot for the Recovery. I got my phone today and have in the mean time asked Huawei to release the kernel source for ALE-21/23 and they have replyed to me. Here are the kernel sources: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=detail&mid=103. As soon as I have time I will look into building a custom rom for the P8 Lite
slade87 said:
Thanks alot for the Recovery. I got my phone today and have in the mean time asked Huawei to release the kernel source for ALE-21/23 and they have replyed to me. Here are the kernel sources: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=detail&mid=103. As soon as I have time I will look into building a custom rom for the P8 Lite
Click to expand...
Click to collapse
Nice that You appreciate it.
By the way, I was said that there are some issues with making a backup to external storage, could someone confirm it?
reas0n said:
Fastboot, dd method or just Flashify app from Play Store.
Click to expand...
Click to collapse
OK I will try Using Flashify app now
Sent from my ALE-L21 using Tapatalk
reas0n said:
Nice that You appreciate it.
By the way, I was said that there are some issues with making a backup to external storage, could someone confirm it?
Click to expand...
Click to collapse
nice work seems to be working well for me thanks
Why don't you move this thread in p8 lite android development section?
slade87 said:
Thanks alot for the Recovery. I got my phone today and have in the mean time asked Huawei to release the kernel source for ALE-21/23 and they have replyed to me. Here are the kernel sources: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=detail&mid=103. As soon as I have time I will look into building a custom rom for the P8 Lite
Click to expand...
Click to collapse
Great to here this news.
Will wait for your custom ROm,
mjrifath said:
Great to here this news.
Will wait for your custom ROm,
Click to expand...
Click to collapse
Well the custom kernel is already running with almost rverything except wifi
Do you know how to fix it?
---------- Post added at 09:06 AM ---------- Previous post was at 09:05 AM ----------
slade87 said:
Well the custom kernel is already running with almost rverything except wifi
Click to expand...
Click to collapse
Do you know how to fix it?
slade87 said:
Well the custom kernel is already running with almost rverything except wifi
Click to expand...
Click to collapse
Hope you would fix wifi issue very soon.
All the best and many thanks for your effort.
mjrifath said:
Hope you would fix wifi issue very soon.
All the best and many thanks for your effort.
Click to expand...
Click to collapse
Well i hope so its the only thing left that doesnt work it seems the sys device is not loading correctly. I will continue looking into it and let u know once it works.
Hello, this is the latest TWRP 3.0.2 Recovery for our p8 lite kirin.
All works perfectly in all functions.
It's based on Marshmallow instead of Lollipop, now you can see the battery percentage and you can also backup the Cust partition.
Just flash it by fastboot :
(Fastboot flash recovery recovery.img)
All credits goes to @XePeleato
For those who's want or need look into the sources
https://github.com/TeamWin/android_device_huawei_p8lite_alel21
What's better/fixed from previous version?
All works pefectly in this newest versions .more quick than the previous.
dkonect said:
Hello, this is the latest TWRP Recovery for our p8 lite kirin.
All works perfectly in all functions.
Just flash it by fastboot :
(Fastboot flash recovery recovery.img)
All credits goes to @XePeleato
Click to expand...
Click to collapse
I'd also post the source:
(github doesn't allow me to post links lol)
Thank you for posting it, I wasn't able to do it :good:
Is it possible to move it on the "P8lite Android Development" ?
I think that is the right place for that ...
Aniway thanks a lot for this new amazing recovery!
XePeleato said:
I'd also post the source:
(github doesn't allow me to post links lol)
Thank you for posting it, I wasn't able to do it :good:
Click to expand...
Click to collapse
maybe you will work on some roms? [emoji1] [emoji1]
Sent from my ALE-L21 using Tapatalk
thanks for your posting. all works perfectly....!!!
ensoy said:
maybe you will work on some roms? [emoji1] [emoji1]
Sent from my ALE-L21 using Tapatalk
Click to expand...
Click to collapse
I already got AOSP 5.0.1 working, however many things were broken and I switched to 5.1.1 whenever it's ready I'll post it here.
XePeleato said:
I already got AOSP 5.0.1 working, however many things were broken and I switched to 5.1.1 whenever it's ready I'll post it here.
Click to expand...
Click to collapse
great, and everything works? I think to continue to support you rom?
Sent from my HUAWEI ALE-UL00 using XDA Labs
velosa said:
great, and everything works? I think to continue to support you rom?
Sent from my HUAWEI ALE-UL00 using XDA Labs
Click to expand...
Click to collapse
Not everything, however let's keep it on-topic, you can follow the development on the source link that dkonect posted.
XePeleato said:
Not everything, however let's keep it on-topic, you can follow the development on the source link that dkonect posted.
Click to expand...
Click to collapse
I will expect posts the link to test I will follow with certainty the development of rom.
Sent from my HUAWEI ALE-UL00 using XDA Labs
XePeleato said:
I already got AOSP 5.0.1 working, however many things were broken and I switched to 5.1.1 whenever it's ready I'll post it here.
Click to expand...
Click to collapse
Please Rom Link?
3.0.1-0 It is out...
Sent from my HUAWEI ALE-L21 using XDA Labs
TWRP 3.0.0.0 P8Lite link dead
dkonect said:
Hello, this is the latest TWRP Recovery for our p8 lite kirin.
All works perfectly in all functions.
Just flash it by fastboot :
(Fastboot flash recovery recovery.img)
All credits goes to @XePeleato
https://www.dropbox.com/s/mg7e48ehkvkxr3u/TWRP_3.0.0.0_P8Lite_kirin.rar?dl=0
For those who's want or need look into the sources
https://github.com/TeamWin/android_device_huawei_p8lite_alel21
Click to expand...
Click to collapse
Dropbox link is dead.
TWRP 3.0.0.0 P8Lite request
xander33 said:
Is it possible to move it on the "P8lite Android Development" ?
I think that is the right place for that ...
Aniway thanks a lot for this new amazing recovery!
Click to expand...
Click to collapse
Will you please upload this TWRP 3.0.0.0 for p8lite. The above link is dead.
Twrp 3.0.0.0 kirin working link
https://drive.google.com/file/d/0B3AMQFok5BARSnVQZzlfaW5QeHc/view?usp=docslist_api
Does the USB works in TWRP?"
lukezaa said:
Does the USB works in TWRP?"
Click to expand...
Click to collapse
If you mean MTP Transfer, yes that works.
Hello, you can't mount usb storage but it's not related to the recovery, the device's didn't have this function. But all works perfectly on this twrp.
dkonect said:
Hello, you can't mount usb storage but it's not related to the recovery, the device's didn't have this function. But all works perfectly on this twrp.
Click to expand...
Click to collapse
I have updated TWRP to 3.0.2-0 please update the OP
Link: https://mega.nz/#!2JYV1KjI!i4O0wIBHNrpCIA1v56Ot_sCBGB7tKkRyGyP-fCMabe0
Hi Folks
I just start developments of Google AOSP rom based on 7.1.2 R6 for our P8 Lite 2017 PRA-LX1, this topic will show you only the developments progress of that rom, will be released once fix most of bugs.
This is only an info topic, do not spam it because will be closed at ended works.
the release builds topic will be on android developments section.
AOSP Recovery: fixed & booting.
AOSP System.
Audio.
Bluetooth.
Camera.
Display.
Fingerprints.
GPS.
Graphics: gralloc & hwcomposer.
Internal & External Storage.
Multimedia.
NFC.
RIL.
Sensors.
Wifi
Note:
Each time when I fix something, will be strike..keep in touch
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
XTutorials said:
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Click to expand...
Click to collapse
Yup
I just send the phone yesterday, no holidays on this period in italy, guess should be repaired quickly.
Finally an AOSP ROM!
Is this still using the stock kernel?
YSFYoussef480 said:
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
Click to expand...
Click to collapse
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Vinnipinni said:
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Click to expand...
Click to collapse
Tried Everything !!!
YSFYoussef480 said:
Tried Everything !!!
Click to expand...
Click to collapse
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Vinnipinni said:
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Click to expand...
Click to collapse
No, I Can't
boofman said:
Finally an AOSP ROM!
Is this still using the stock kernel?
Click to expand...
Click to collapse
Yes still use stock kernel.
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
Is There Any ETAs,Please ?!
YSFYoussef480 said:
Is There Any ETAs,Please ?!
Click to expand...
Click to collapse
no, once get booted I"ll post screenshots and modding this phone will be very hard because no kernel source for our pra-lx1 yet.
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
xpatze85x said:
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
Click to expand...
Click to collapse
Once you have root, even with the Stock ROM, you can already start uninstalling System Apps to debloat.
---------- Post added at 05:43 AM ---------- Previous post was at 05:41 AM ----------
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
This is my first Huwei device, do they usually release Sources for Devs?
boofman said:
This is my first Huwei device, do they usually release Sources for Devs?
Click to expand...
Click to collapse
They released the source code for p8, and some other device but late. Kirin isn't dev friendly AFAIK
Reserved
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
haky 86 said:
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
Click to expand...
Click to collapse
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
YSFYoussef480 said:
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
Click to expand...
Click to collapse
Have you tried restoring the stock ROM using ADB? It worked for me..
boofman said:
Have you tried restoring the stock ROM using ADB? It worked for me..
Click to expand...
Click to collapse
How ?!
YSFYoussef480 said:
How ?!
Click to expand...
Click to collapse
Sorry, I meant installing, not restoring. It's just bascally downloading the ROM, extracting the contents using Huawei update extractor, and using ADB to push the files in. You will need to reinstall TWRP and Root afterwards..Google is your friend, there are instructions out there, as there are 3 ways to install the stock ROM: using the updater on your phone, using the key combo, and the 3rd one being ADB.
Welcome to a world of new they called me walker or walkerblue
FLASH AT YOUR OWN RISK!!
Today im bringing you guys a twrp that still in works
If any devs that would like to help to get all working make our Z2 force page grow faster
I'll be making a hangout chat for devs only!
https://hangouts.google.com/group/ksHPFhZPgjPZBd292
TWRP boots so far for T-Mobile ,Sprint
First I want to thank these people for making everything easy and possible for us in XDA
Thanks to @shimp208 for making Minimal ADB tool easy to use and also thanks to TWRP team for making root easy
Okay now to install this recovery
First make sure you all all drives on computers installed
USB Link: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/78830/p/30,2625,665
ADB Link: https://forum.xda-developers.com/showthread.php?t=2317790
Beta recovery Link: https://drive.google.com/open?id=0BxohOX1FGysPaV9ObDVFVjNZWU0
Step Two: Ones you have all your files now you need is the commond to flash this recovery img
So in ADB tools make sure you put the recovery in the folder on where you have it located in your computer
then make sure you hit cmd-here or the icon app that tool left you on your desktop
Then ones that happens make sure you have debugging check on your device
then run this on cmd "adb devies" to make sure your device is listed
then after you have done that make sure you run this commend next "adb reboot bootloader"
ones you do that then your phone should take you too bootloader page then you can flash recovery file
then you will put this commend "fastboot flash boot beta.img""
then ones you do that make sure you use your arrows on your side of your device to get into recovery
Then BOOM your have your twrp flashed
Hit the Big Thumps up for me
Five Star this page
Share Share this page
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Infect_Ed said:
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Click to expand...
Click to collapse
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
walkerblue2023 said:
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
Click to expand...
Click to collapse
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Infect_Ed said:
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Click to expand...
Click to collapse
thier is no github for it yet but for some reason i was able to get it too boot kinda weird got the stock recovery and twrp recovery made it into one and thier you go it booted up on the phone but with no root
What tree did you use?
Infect_Ed said:
What tree did you use?
Click to expand...
Click to collapse
mk is only the one that booted it up
Sweet
Sent from my SM-N930F using XDA-Developers Legacy app
All good news!!
walkerblue2023 said:
mk is only the one that booted it up
Click to expand...
Click to collapse
What do you mean mk?
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
My bad I mean mtk tool
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
Z2 play what I used
[delete]
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
How if it boots for me I might have uploaded the wrong file
shouldn't it be "fastboot flash recovery beta.img"?
FrankenDroid said:
shouldn't it be "fastboot flash recovery beta.img"?
Click to expand...
Click to collapse
Recovery is in the kernel on this phone.
Sent from my Moto Z (2) using Tapatalk
Ah, interesting. I think it's probably time to get smart on this new partitioning stuff
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Uzephi said:
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Click to expand...
Click to collapse
thank you for the information and also cant wait for your kernel
This is TWRP to Mate 9/Android O, brought to you by FunkyHuawei.
It's just a preliminary build so I can't promise anything/everything will work! Keep that in mind. I'm not responsible if you brick your device.
EDIT: Does not work with Mate 10 series.
DOWNLOAD LINK:
https://drive.google.com/open?id=0B45NCsO2AL_1NEh2aDFLM3JlYkU
It works on the Android O build here:
https://www.reddit.com/r/FunkyHuawei/comments/75uwkd/october_12_first_official_android_o_beta_for/
and the official European beta.
To install:
First, have Android O running. Unlock the bootloader. Download the twrp image.
Then, run in fastboot mode:
fastboot flash recovery_ramdisk twrp_android_o_mate9_a1.img
Then, reboot holding volume up, and you've got TWRP!
Note: With the Android O update, it is no longer possible to flash the recovery2 partition. Furthermore, the names of the partitions have changed. Please keep that in mind, and don't mess around too much with TWRP, to be sure you don't brick your system!
That's Cool ("L")
A way ahead always.
Thanks,
goldybewon
@duraaraa
Can you upload the sources to github.com or upload boot image here?
Thank you.
Blackball said:
@duraaraa
Can you upload the sources to github.com or upload boot image here?
Thank you.
Click to expand...
Click to collapse
What are you looking for? You could just unpack twrp using android image kitchen if you want partition names etc.
Yes I know. But I'm interested in Oreo kernel.
Blackball said:
Yes I know. But I'm interested in Oreo kernel.
Click to expand...
Click to collapse
Kernel is not included within recovery anymore. Things have changed a lot.
Wooooow amazing ...??
Sent from my MHA-L09 using XDA-Developers Legacy app
duraaraa said:
Kernel is not included within recovery anymore. Things have changed a lot.
Click to expand...
Click to collapse
ok. Hope i get a oreo firmware soon (P10plus) [emoji106]
Thank you
Blackball said:
ok. Hope i get a oreo firmware soon (P10plus) [emoji106]
Thank you
Click to expand...
Click to collapse
Actually, I have oreo for P10 plus, but haven't released it. If you want to test it, maybe I can try to release something. I want to find something more recent though.
I just want the firmware to look inside what things have changed etc. Maybe you can write me a pm what we can do that I get the files.
---------- Post added at 01:06 PM ---------- Previous post was at 12:30 PM ----------
@duraaraa
I have sent a pm
Ah. boot partition is now called ramdisk_a, and zImage (kernel) is kept in kernel_a.
Need to "hack" magisk to get this working xD
Edit: It's impossible!
Maybe.
Magisk refuses to find ramdisk_a or /dev/block/sdd36.
That's interesting. I hope Huawei upload new sources and this time maybe working sources
@duraaraa could you upload stock recover_ramdisk? I can't go back to N without it and wasted 2 credits :/
ante0 said:
Ah. boot partition is now called ramdisk_a, and zImage (kernel) is kept in kernel_a.
Need to "hack" magisk to get this working xD
Edit: It's impossible!
Maybe.
Magisk refuses to find ramdisk_a or /dev/block/sdd36.
Click to expand...
Click to collapse
With supersu,the same?
auras76 said:
With supersu,the same?
Click to expand...
Click to collapse
I think so. A few files that are usually found in boot image are not found in ramdisk_a. So even if we could get it to find that partition it probably won't work anyway.
I tried making a pre-rooted image, but since it's missing sepolicy it wouldn't work (I guess that's why anyway).
I can't live without root . Mainly because all my backups are made with Titanium Backup, which requires root. And I need adfree..
ante0 said:
@duraaraa could you upload stock recover_ramdisk? I can't go back to N without it and wasted 2 credits :/
Click to expand...
Click to collapse
I can't upload it for everyone but if you send an email to FH support you can get a hold of it.
duraaraa said:
I can't upload it for everyone but if you send an email to FH support you can get a hold of it.
Click to expand...
Click to collapse
Thanks
ante0 said:
Ah. boot partition is now called ramdisk_a, and zImage (kernel) is kept in kernel_a.
Need to "hack" magisk to get this working xD
Edit: It's impossible!
Maybe.
Magisk refuses to find ramdisk_a or /dev/block/sdd36.
Click to expand...
Click to collapse
INSTALL THIS PATCHED SUPERSU.ITS WORKING
https://androidfilehost.com/?fid=889964283620758335
auras76 said:
INSTALL THIS PATCHED SUPERSU.ITS WORKING
https://androidfilehost.com/?fid=889964283620758335
Click to expand...
Click to collapse
Cool. Do you know what's changed in it? I'm not by a computer so can't really compare :/
ante0 said:
Cool. Do you know what's changed in it? I'm not by a computer so can't really compare :/
Click to expand...
Click to collapse
boot_a to ramdisk_a