So basically I unlocked my mi 8 and tried some of the roms and kernels. First I flashed the twrp recovery. I flashed two roms. After that I forget about the zip that disables the verification, I got the popular issue where the recovery doesn't open after flashing it. Then I found the solution and installed the official rom via fastboot, then I flashed the recovery the proper way. Everything was fine, I flashed the official pie 9 rom again, I also flashed the eXtremeKernel V2. Later I noticed that when I open the camera it doesn't show anything on it. I tried using a third party camera app (OpenCamera) it didn't worked either. I'm sorry for the way I wrote it (it's a bit unlogical) but I hope someone can help me out with this. Thanks
Flash last official rom via mi flash (!!!!!! CHANGE CHECKBOX FROM CLEAN ALL AND LOCK TO CLEAN ALL!!!). Load installed ROM and open camera, if it's working go to flash costum ROM. And it's should work without problems.
Thanks for help I tried that but it's not working :/
ItzGarek said:
Thanks for help I tried that but it's not working :/
Click to expand...
Click to collapse
Do you do clean flash?
the_virus_ua said:
Do you do clean flash?
Click to expand...
Click to collapse
Yes, I did
Related
Hi XDA,
Some days ago, I wanted to full wipe my phone before I do a clean install of CM12.1.
I couldn't since cyanogenmod recovery is installed on my phone.
I tried to flash it from my phone directly, thanks to rashr, TWRP manager, or other apps like this, no one could flash recoveries I wanted to be flashed.
Is there a way to surely flash a recovery without using a computer ?
xdadogs said:
Hi XDA,
Some days ago, I wanted to full wipe my phone before I do a clean install of CM12.1.
I couldn't since cyanogenmod recovery is installed on my phone.
I tried to flash it from my phone directly, thanks to rashr, TWRP manager, or other apps like this, no one could flash recoveries I wanted to be flashed.
Is there a way to surely flash a recovery without using a computer ?
Click to expand...
Click to collapse
Yeah, u try Rashr v2.3 or older version. Dont use the latest version it has got problem.
Older versions rocks !!
Phoenix854 said:
Yeah, u try Rashr v2.3 or older version. Dont use the latest version it has got problem.
Click to expand...
Click to collapse
It Worked ! Perfectly worked ! So simple after all... Thank you so much for the advice !
I want to install Marshmallow on my moto g. when i am going to install any ROM 6.0 it gets installed.
But next step when i flash gapps 6.0 then it says fail install.
what willl be solution for this?
I am using Philz recovery 6.0.2
tried Cynopop v4.5 Marshmallow Rom.
Gapps from OpenGapps type i tried - pico, mini ,nano
nothing worked.
I don't know what your problem is but here's a solution .
Install TWRP 2.8.6.0.
Clean Flash ROM and then flash Gapps.
Mostly you won't get any error.
Hope this helped.
sagar846 said:
I don't know what your problem is but here's a solution .
Install TWRP 2.8.6.0.
Clean Flash ROM and then flash Gapps.
Mostly you won't get any error.
Hope this helped.
Click to expand...
Click to collapse
Sagar I tried on TWRP 2.8.6.01 also.
TWRP didn't work on my mobile.
it restarts my mobile after installing single zip file. I don't know why. so i moved to Philz recovery.
any suggestion?
Are you rooted? Then you can flash TWRP through flashify app and see if it solves your issue.
If not then you'll have to restore to stock and follow the procedures to root and flash again.
FYI I did face this problem once but solved it by reverting to stock (I didn't intend to do this as a solution but it worked anyway).
sagar846 said:
Are you rooted? Then you can flash TWRP through flashify app and see if it solves your issue.
If not then you'll have to restore to stock and follow the procedures to root and flash again.
FYI I did face this problem once but solved it by reverting to stock (I didn't intend to do this as a solution but it worked anyway).
Click to expand...
Click to collapse
Sagar buddy Yes! I rooted!
I am using AICP 10.0 since 6-7 months. there is no problem of root.
Yeah Like I said I fixed it by fluke like I told you (you can try it if you want) but If you want a proper answer. Id suggest you wait for someone to know what's actually wrong. Also post your problem on The TWRP or Philz Thread . Stop Creating New threads for problems.
Keep XDA clean
shindesharad71 said:
Sagar buddy Yes! I rooted!
I am using AICP 10.0 since 6-7 months. there is no problem of root.
Click to expand...
Click to collapse
If u can send the screenshot of the error then I think so someone might help(I can too).
tra_dax
First time happened after I updated CM 11 to latest version, I dont know whats the problem, my phone restarts itself for about twice or three times a day. any idea how to fix it?
You will flash original stock ROM
elvin.kasimov said:
You will flash original stock ROM
Click to expand...
Click to collapse
do you know how to flash stock rom besides using nokia care suite? I ve tried flashing via TWRP but failed.
https://www.youtube.com/watch?v=HGpj7tr5hrc
Good morning guys,
This is my first time trying to install any CM rom on my 2014 Moto G with original 6.0 Marshmallow system, had a little trouble unlocking the bootloader, but solved that in a little while and after that i sucessfully installed TWRP touch but could not flash any zip file from it (including a super user zip, after executing a "run.bat" file required first). After some hours of trying hard, i used the factory reset from the bootloader and after the process was done my wifi and another features stopped working, so i installed a stock kit-kat rom and got everything back to work, problem solved. Unfortunately my TWRP still can't flash the superuser file, and I really wanted to run some custom Nougat rom on my device. Bootloader still unlocked code 3, device fully working on kitkat, but need some tips on how to get over the TWRP trouble I've been dealing with.
Thank you for reading, sorry for bad english.
which TWRP version do you use?
Spieletips said:
which TWRP version do you use?
Click to expand...
Click to collapse
3.1,but 2.8 got me the same problem
Spieletips said:
which TWRP version do you use?
Click to expand...
Click to collapse
just got to sucessfully flash the zip for super user, but still cant get to flash either one of 2 rom zip files i had in my sd card
paulo.rdgs.pcr said:
just got to sucessfully flash the zip for super user, but still cant get to flash either one of 2 rom zip files i had in my sd card
Click to expand...
Click to collapse
What error TWRP give? I think its because your new(android 6) bootloader isn't compatible with many roms. I don't know how to fix it :/ but you need to care, many users have hard bricked their devices like that.
paulo.rdgs.pcr said:
just got to sucessfully flash the zip for super user, but still cant get to flash either one of 2 rom zip files i had in my sd card
Click to expand...
Click to collapse
i can help tell me roms you able to flash
and other 2 that not able to flash with thread links
it just says the zip is corrupted, well i got a kit kat stock rom installed via bootloader, but just cant load any rom from twrp
rony raj said:
i can help tell me roms you able to flash
and other 2 that not able to flash with thread links
Click to expand...
Click to collapse
actually i couldnt load any rom via TWRP (I've tried 3 or 4 CM14 different roms, didnt remember exactly which ones, but I'll try some more by friday or thursday), the kitkat stock rom i have now was installed via bootloader/cmd
paulo.rdgs.pcr said:
actually i couldnt load any rom via TWRP (I've tried 3 or 4 CM14 different roms, didnt remember exactly which ones, but I'll try some more by friday or thursday), the kitkat stock rom i have now was installed via bootloader/cmd
Click to expand...
Click to collapse
update your recovery from here
https://dl.twrp.me/titan/
download latest twrp and rom
latest rom is here
https://forum.xda-developers.com/moto-g-2014/development/rom-aospextended-rom-v3-3-t3572471
hit thumbs up if i helped you
rony raj said:
update your recovery from here
https://dl.twrp.me/titan/
download latest twrp and rom
latest rom is here
https://forum.xda-developers.com/moto-g-2014/development/rom-aospextended-rom-v3-3-t3572471
hit thumbs up if i helped you
Click to expand...
Click to collapse
This solved my issues, thank you soo much fellow
I have flashed the 3.2.1.0 version of twrp recovery but it stucks at reboot when i reboot the system well i don't know what to do if i flash the old versin 3.1.1.0 is it would be problem. Now i am on stock rom and recovery. Open for suggestions.
It may be a kernel problem. I had the same thing happen on stock. I fixed it by downloading a ROM then installing TWRP. After install go right into recovery after you disconnect from Odin and clean flash the new ROM. No problems after that.
Any errors on screen as it boots?
phuhcue said:
Any errors on screen as it boots?
Click to expand...
Click to collapse
İt's just shows note 5 logo and repeating that after and after.
sparkeymat said:
It may be a kernel problem. I had the same thing happen on stock. I fixed it by downloading a ROM then installing TWRP. After install go right into recovery after you disconnect from Odin and clean flash the new ROM. No problems after that.
Click to expand...
Click to collapse
Can you provide any more details and specifics on which files and procedures worked for you? Thank you.
[email protected] said:
Can you provide any more details and specifics on which files and procedures worked for you? Thank you.
Click to expand...
Click to collapse
I used the latest TWRP and immediately flashed the Teleteam s8n8 ROM after installing TWRP. You can find the ROM on here with a quick search.