Database Develop

how to install Magisk??? SM-J500H

I wanna root my phone and as far as I've been told Magisk seems like the best option right now but I haven't figured out how to do that yet. I have the Magisk Manager APK on my phone and the ZIP file too but I don't know what to do after. can someone please help me?
my phone is a Samsung Galaxy J5 (SM-J500H)
I also appreciate any sort of help or tips whatsoever. I'm new to the XDA Forums but after looking at some threads I believe that
you guys can always help someone in need

I have the same phone and did the same process:
1. Install odin Download Odin
2. Install latest TWRP Recovery Download TWRP for J500h using Odin
3. Install the (latest .zip of Magisk) from TWRP Recovery. Download Magisk
4. Reboot to system
5. Install latest Magisk Manager v8.0.7

Shuja Ahmed Official said:
I have the same phone and did the same process:
1. Install odin Download Odin
2. Install latest TWRP Recovery Download TWRP for J500h using Odin
3. Install the (latest .zip of Magisk) from TWRP Recovery. Download Magisk
4. Reboot to system
5. Install latest Magisk Manager v8.0.7
Click to expand...
Click to collapse
WARNING ⚠
I am not responsible for bricking your device.
This method works on my phone I don't know if it works for you.

Clearing up TWRP ambiguity versions + rooting MIUI pie

There is confusion over which recoveries to install for Redmi 6 (cereus).
Failure to install the correct TWRP will result in a hard brick with no chance of restoring the device without an authorised account or going to a Mi Service Centre.
If you are currently on the MIUI Oreo ROM:
You may ONLY use TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
The recovery by either TWRP or LR.Team is both ok.
If you are on the PIE rom:
You MUST use TWRP 3.3.1 or OrangeFox Recovery. R10.0-2 nocrypt Pie is confirmed to be working by me.
To root MIUI pie, follow the instructions in this post from 4PDA. This is because you will be unable to decrypt data.
You need to create an account to download the patched boot.img. You can either create one yourself or ask me or someone else to PM you with the boot.img. I will not attach it to this thread because it is not my work. The files have now been attached. See post below.
All credits go towards the respective recovery authors and 4pda

OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs

I did something wrong just don't know what
I tried with OrangeFox and when rebooted in recovery the phone would not turn on and just vibrates.
I was lucky because I just needed to open and remove the battery to get the phone back up.

So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
0) Download patched boot image from OP
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> Flash patched boot.img -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
would this be the correct procedure?
cheers

snoerme said:
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
cheers
Click to expand...
Click to collapse
?????????????????????
Why don't you skip steps 1-3 and just use XiaoMi Flash to install 10.4.4.0 via Fastboot by 'saving user data', then follow the instructions here? XiaoMiFlash will overwrite your recovery with the default so there is no risk of a brick. Then Flash TWRP Pie, flash boot img, flash magisk.
As I have said, you will brick your device. If you have TWRP Oreo, and then you install MIUI Pie, you will brick your device. You are doing EXACTLY what I told you not to do!

It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
edit: do you know if the latest magisk stable 20.0 would also work?

snoerme said:
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
Click to expand...
Click to collapse
I'm not sure - I have never flashed any MIUI ROM in TWRP. It seems normal though - the updaterscript probably tells TWRP to overwrite itself.
https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847 It's a bit complicated

This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot and enjoy

Hi, currently I'm on stable China mui v10.4.3.0. Do you have boot.img on that v10.4.3.0. Currently link only provide boot.img for v10.4.2.0 for the china version. If no how do I get those, can I just backup them from twrp, Then create patched boot img with those backup boot? Thanks

Che0063 said:
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
Click to expand...
Click to collapse
Thanx for boot_10.4.4.0_R6_mgsk_193.img :good:
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
ThanX ! ! !
This work for me :good:
EDIT:
The flashlight and the camera does not work after flash the boot boot_10.4.4.0_R6_mgsk_193.img [emoji848]
Does anyone else have a similar problem?
View attachment 4862683

I have the camera and flashlight problem too. Any fix?

Unfortunately, I didn't find any solution.
Currently, my phone does not start, has a black screen and vibrates all the time. I can't run it in any way
EDIT:
Hi.
I was able to bring the phone to life. Get instructions on how to get to the battery https://www.youtube.com/watch?v=L9FH88b16bc https://www.youtube.com/watch?v=fAflA4UKLLY. In orangeFox recovery I checked the flashlight, it works.

That makes us two. My phone is unusable at the moment. I thought the root was responsible for the camera bugs, I uninstalled magisk, the bug was still there. I tried to reinstall MIUI 10.4.4 ang got an error. I've wiped everything including vendor and system.

I clean dalvik and cache and for now the phone is working even, after flash the patch boot.img

ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
Hello this is the steps i did but when rebooting to recovery i end up on blackcreen or mai i say powered off screen with the device unable to boot to recovery,any ideas what i did wrongly?

It seems there is something wrong with that boot patch. I followed a procedure on youtube and my phone is succesfully rooted without any bug

@ambyy
what guide did you use on YouTube?
Wysłane z mojego Redmi 6 przy użyciu Tapatalka

https://www.youtube.com/watch?v=I_4Zmco9R78&t=25s

Hard brick caused by flashing wrong TWRP is indeed able to get solved with unplugging the battery.

Miui v11 boot.img please

Could please somebody build a working TWRP build for me?

I need somebody to build me a working
TWRP build for the SM-A305N (Korea).
Every TWRP in XDA doesn't seem to work in my device, probably because they aren't for the A305N.
A week before, I finally found a 3.3.1 version TWRP build that works in my phone so I flashed it via odin, flashed magisk.zip, and rebooted successfully.
but after flashed an optimization file I found that the build doesn't support decrypting files, and it can't read the internal storage even though my device reboots into system normally and the files are all right in the file manager (files are shown as random characters in twrp)
Please, could somebody make a working TWRP build for A305N?
+Q. Can a Disable-dm verity file brick my device?

I made a password as a security lock system on my phone, but when I booted to twrp it didn't ask for a password. (Also with PIN)
Also, when I typed
"twrp decrypt MyPassword"
(MyPassword is the password I put on my device)
TWRP said that decrypting files wasn't installed on this build of TWRP.

sycall2847 said:
I need somebody to build me a working
TWRP build for the SM-A305N (Korea).
Every TWRP in XDA doesn't seem to work in my device, probably because they aren't for the A305N.
A week before, I finally found a 3.3.1 version TWRP build that works in my phone so I flashed it via odin, flashed magisk.zip, and rebooted successfully.
but after flashed an optimization file I found that the build doesn't support decrypting files, and it can't read the internal storage even though my device reboots into system normally and the files are all right in the file manager (files are shown as random characters in twrp)
Please, could somebody make a working TWRP build for A305N?
+Q. Can a Disable-dm verity file brick my device?
Click to expand...
Click to collapse
Hi
Download twrp 3.3.1.0.tar and flash with odin
Then download twrp 3.4.0.img or 3.5.1.img and install by twrp
And remember mount system

Could you plz explain steps more specifically

DOES THIS REALLY WORK ON MY GALAXY A30? Thanks bro

Yes. Work for me

sycall2847 said:
Could you plz explain steps more specifically
Click to expand...
Click to collapse
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone

OK thanks Umm.. TWRP 3.3.1 is already flashed in my device (It cant read internal storage). Should I first flash the stock recovery img with odin before flashing 3.3.1 again ir should I just flash the 3.3.1 again?

Mozaffar1994 said:
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
Click to expand...
Click to collapse
After rebooting to TWRP 3.4, What should I do next? Should I flash the magisk zip?

Can I just flash the TWRP 3.4 file by flashify or TWRP official app? Will current TWRP be replaced with it?

sycall2847 said:
Can I just flash the TWRP 3.4 file by flashify or TWRP official app? Will current TWRP be replaced with it?
Click to expand...
Click to collapse
If work ,do it

If what works??

sycall2847 said:
If what
Click to expand...
Click to collapse
I installed as I said before.
I do not know of other methods.
Sorry

Mozaffar1994 said:
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
Click to expand...
Click to collapse
This is how i installed TWRP on my A305F

How To Guide GUIDE to Root your X7 MAX

Prerequisites:
Bootloader unlocked
TWRP
Bootloader unlock guide : https://forum.xda-developers.com/t/guide-bootloader-unlock-on-rui-2-0-based-on-android-11-r.4286451/
TWRP : https://forum.xda-developers.com/t/twrp-recovery-unofficial-for-realme-x7-max-rmx3031.4336503/
Download this version of Magisk Manager "Magisk Alpha (706a4922-alpha)" from file attached below because stable version is causing bootloop, for now
Steps :
To Root Your Phone Install above mentioned version of magisk manager
Pull your boot.img from recovery
adb pull /dev/block/by-name/boot boot.img
check boot image in directory you extracted your adb zip
Patch your pulled boot.img from apk given below
Flash it via Twrp in Boot Partition
Now u successfully rooted your device
Troubleshooting:
One issue I personally faced was driver problem (Fastboot Device Not detecting) which I was easily able to fix with the help of this video : https://cutt.ly/wEEit33
use this only if you are also facing this issue
Sources : here

Sir can i flash the magisk alpha from twrp by converting the apk into .zip then flash it directly from twrp.??

Aditya8520 said:
Sir can i flash the magisk alpha from twrp by converting the apk into .zip then flash it directly from twrp.??
Click to expand...
Click to collapse
NO, that's not how it works

Always getting bootloop. Tried multiple magisk versions, multiple ways to extract boot.img, but always getting only to white "realme" logo. Im on A18 btw

borkakoz said:
Always getting bootloop. Tried multiple magisk versions, multiple ways to extract boot.img, but always getting only to white "realme" logo. Im on A18 btw
Click to expand...
Click to collapse
Read carefully, I have metioned in post "Download this version of Magisk Manager "Magisk Alpha (706a4922-alpha)" from file attached below because stable version is causing bootloop, for now"

Harsh raj sah said:
Read carefully, I have metioned in post "Download this version of Magisk Manager "Magisk Alpha (706a4922-alpha)" from file attached below because stable version is causing bootloop, for now"
Click to expand...
Click to collapse
As I mentioned in my reply, I tried multiple versions of Magisk, and version from post too. Is there any other way to get that patched boot img?

I also noticed that flashing process is almost instant. It takes only like a split second. Can it be the issue?

it's not stable at all
are there any other options?

i had arranged all the things fix all the issue and make an article of root realme x7 max. all the command is provided here even downloads file

Up to Date guide on magisk root SM-A600FN

Correct magisk version for SM-A600FN running android 10. Ive tried a number of guides and versions of magisk to no look. the latest guide ive used is https://www.thecustomdroid.com/install-twrp-root-samsung-galaxy-a6-2018-guide/.
Currently in boot loop but i can get back into twrp. My next attempt im trying to download https://samfrew.com/model/SM-A600FN/ and reflash stock.
any up to date advise on how to magisk root

A600FN rooting is simple:
1. Unlock bootloader.
2. Flash TWRP or OrangeFox via Odin.
3. Download latest Magisk, and rename Magisk.apk to Magisk.zip.
4. Flash that Magisk.zip like any other zip in TWRP.
5. Reboot to system.
Alternative method:
Installation
The Magic Mask for Android
topjohnwu.github.io

ahmed786 said:
Correct magisk version for SM-A600FN running android 10. Ive tried a number of guides and versions of magisk to no look. the latest guide ive used is https://www.thecustomdroid.com/install-twrp-root-samsung-galaxy-a6-2018-guide/.
Currently in boot loop but i can get back into twrp. My next attempt im trying to download https://samfrew.com/model/SM-A600FN/ and reflash stock.
any up to date advise on how to magisk root
Click to expand...
Click to collapse
i rooted mine with patching the ap file in the firmware with magisk and then unlock bootloder and insted of useing original ap file i used the patched magisk one and i filled the csc bl ect with original and when its done install magisk manager then done. it worked for sm-a600fn andoid 10 it worked on all a6 not sure about a6+