one power treble support please - Motorola One Power Questions & Answers

I downloaded some treble device supporting apps it showing one power supports it. So I can flash gsi images . But any body of you tested gsi images are working . I want to know how to flash treble rom step by step.
I thought it's little bit tricky right compared to normal twrp flashing ??
Please help me and thank you advance ..

sravanthsam said:
I downloaded some treble device supporting apps it showing one power supports it. So I can flash gsi images . But any body of you tested gsi images are working . I want to know how to flash treble rom step by step.
I thought it's little bit tricky right compared to normal twrp flashing ??
Please help me and thank you advance ..
Click to expand...
Click to collapse
It's already a treble enabled device, you can flash gsi.
But if you are on pie. Use pie gsi only . Same for oreo

Related

What is treble and why is all the fuss about it?

Recently I saw that there appeared a new kind of roms which need a special recovery and, as I could find, have something to do with easier update of Android version. Also I have seen a project: https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659 which claims to have one rom file that can be flashed on a impressing number of roms. I saw the first comment by author which has a method to know if a device has support for treble and it is refered to run "treble check" app from play store on official rom. The thing is that I experimented and installed treble rom (lineage OS) from redmi 4x thread and did the check if the device is supported (the screenshot is attached below) and saw that on this rom it is supported, in contrary to MIUI. The question is about this controversion: is this device supported or not? Can I flash these ROMs from the thread? Are treble ROMs really like a universal flashable file for multiple devices?
If you flash GSI (Generic System Image) it will work on our device. Yes Treble roms are universally flashable if GSI is used, with some minimal modification for device specific. So porting roms will easier, and less time consuming.
Anyone can correct me, if i 'm wrong.
drthrax07 said:
If you flash GSI (Generic System Image) it will work on our device. Yes Treble roms are universally flashable if GSI is used, with some minimal modification for device specific. So porting roms will easier, and less time consuming.
Anyone can correct me, if i 'm wrong.
Click to expand...
Click to collapse
So if I flash the rim from this link specifically on redmi 4x, the device will have no harm at all?
ViorelRj said:
So if I flash the rim from this link specifically on redmi 4x, the device will have no harm at all?
Click to expand...
Click to collapse
Yes, but follow the instruction there. Our device is A-only device. Use the special recovery here for flashing. Or flash the lineageos 15.1 treble edition first just find in on our device forum.
drthrax07 said:
Yes, but follow the instruction there. Our device is A-only device. Use the special recovery here for flashing. Or flash the lineageos 15.1 treble edition first just find in on our device forum.
Click to expand...
Click to collapse
I have seen that seamless updates require A and B partition. I want to know what I am loosing with this device by having only the A partition (what really is seamless update and how does it work)? P.S. sorry for being annoying.
ViorelRj said:
I have seen that seamless updates require A and B partition. I want to know what I am loosing with this device by having only the A partition (what really is seamless update and how does it work)? P.S. sorry for being annoying.
Click to expand...
Click to collapse
As far as i know the seamlees update works this way:
In slot A you have installed any OS Example Android 8.1
In slot B there is a backup of the OS Om slot A
This mean you can install the ota of Android P (example) in one of the slots while you are on Facebook for example

Android P Treble GSI

Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
The Marionette said:
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
Click to expand...
Click to collapse
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Tell us how it works out [emoji846]
Skickat från min MI 8 via Tapatalk
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Been wanting to get the 8 se, but I've been waiting to hear if phh-treble and other GSIs work before buying. other than notch problems are there any other major issues? Once P is released and phh-treble is updated to android 9 the notch won't be a problem anymore due to AOSP notch support.
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Can you point me to a guide to run Lineage os or RR on out SE?
I am familiar in flashing custom for many years but i am new to treble and just heard about it.
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Ydraulikos said:
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Click to expand...
Click to collapse
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
marcel112 said:
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
Click to expand...
Click to collapse
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Ydraulikos said:
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Click to expand...
Click to collapse
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
marcel112 said:
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
Click to expand...
Click to collapse
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Does the system detect the notch on lineage?
Ydraulikos said:
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Click to expand...
Click to collapse
i did full wipe,
after that i tried to install image, but as what do i need to flash this?
system image
boot
recovery
vendor image
firmware
persist
splash
logo
etc etc?
i choose system image, but after flash ( was quick ) i get no OS?
edit: so i can flash anyone off this page, as long as i use arm64 Aonly for my Mi 8 SE?
edit 2: got it..
install is real fast, and phone is very quick
after trying treble...
i tried to go back to miui backup..
It boots fine, but i cant get past pin code?
I know 100% its the right code, does it have to do with trying treble?
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
jectsin said:
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
Click to expand...
Click to collapse
Everything works on RR? How is the camera?
_katho_ said:
Everything works on RR? How is the camera?
Click to expand...
Click to collapse
work. but bad quality
jectsin said:
work. but bad quality
Click to expand...
Click to collapse
yes and notch is not detected for me
marcel112 said:
yes and notch is not detected for me
Click to expand...
Click to collapse
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
The Marionette said:
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
Click to expand...
Click to collapse
i know this is not miui forum, but i made twrp backup..
Why cant i unlock after restoring after flashing Treble based roms ?
I tried yesterday 3 trebles and full wiped, and restored nandroid of miui 10.
All looks good, but after boot up, i cant get past pincode( i know its right code 110% )

Gsi image flash for samsung a30 (sm-a305f)

Hi developers and fellow modders!
I got to know that our samsung a30 supports project treble and so we can install any gsi(generic system image ) it!!
That means latest updates as well of almost any android too be it stock or not!!
I wanted to know why is there no post regarding this?
Moreover this requires twrp which is already available and the vendor.zip needs to be found and then we can install any gsi rom out there be it lineage, pixel experience etc etc... Pls help pls as there is virtually no development for android 10.
keep20001 said:
Hi developers and fellow modders!
I got to know that our samsung a30 supports project treble and so we can install any gsi(generic system image ) it!!
That means latest updates as well of almost any android too be it stock or not!!
I wanted to know why is there no post regarding this?
Moreover this requires twrp which is already available and the vendor.zip needs to be found and then we can install any gsi rom out there be it lineage, pixel experience etc etc... Pls help pls as there is virtually no development for android 10.
Click to expand...
Click to collapse
Hi , I have an A305F/DS , I did a flash with Odin to android 10, I had lost my signal sim and actually I'm under custom also without signal sim ! Any solution ?

Question about lack of A6 ROMs

After spending a couple of weeks searching for LineageOS for the A6 (not A6+), I've discovered that there's very little support for this device. Why is this?
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
nqnxev said:
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
Click to expand...
Click to collapse
So it's not so much as ROMs for the A6 but instead more GSIs for the A6? If I'm understanding correctly
Kimitzuni said:
So it's not so much as ROMs for the A6 but instead more GSIs for the A6? If I'm understanding correctly
Click to expand...
Click to collapse
Maybe not "instead", but they just work:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1. Go to custom recovery (recommended will be OrangeFox R11.0).
2. Wipe partitions: cache, dalvik, data, vendor, system.
3. Choose GSI from link above (I can recommend Lineage R mod but you can try different ones; choose arm32_binder64 vndklite builds), download, extract and flash it as "System Image" through custom recovery.
4. Flash vendor for A6 via custom recovery.
5. Optionally flash any custom kernel for A600X.
6. Reboot to system.
If you want typical OneUI rom then use RadicalQuack or JynxOS.
nqnxev said:
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
Click to expand...
Click to collapse
sorry lineage R mod support for A6+ S605G ?
Getting confused with the different versions for A6 / A6+ etc.
I have an SM-600FN model which I think is A6 (not S or +).
It's currently running stock 10 - is there a good 64bit ROM for this? I was thinking it'd be easy to pick out but it is old... I could only see an Android 6 64bit ROM?
Lothaen said:
Getting confused with the different versions for A6 / A6+ etc.
I have an SM-600FN model which I think is A6 (not S or +).
It's currently running stock 10 - is there a good 64bit ROM for this? I was thinking it'd be easy to pick out but it is old... I could only see an Android 6 64bit ROM?
Click to expand...
Click to collapse
For A600FN pretty stable arm64 rom is RadicalQuack. arm64 GSI is also possibile to run on arm64 vendor, but it's not perfect (unstable).
akbare said:
sorry lineage R mod support for A6+ S605G ?
Click to expand...
Click to collapse
Read this thread:
how downgrade sm-a605fn from android 10 to 9
Hello, I have a Samsung Galaxy A6+ with latest fw installed. (italian version) A605FNXXU7CUD4 The phone is totally useless after the update to android 10, it takes AGES to perform any action, even open the Camera or open a Message. Already...
forum.xda-developers.com
Maybe it will be helpful.
nqnxev said:
Maybe not "instead", but they just work:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1. Go to custom recovery (recommended will be OrangeFox R11.0).
2. Wipe partitions: cache, dalvik, data, vendor, system.
3. Choose GSI from link above (I can recommend Lineage R mod but you can try different ones; choose arm32_binder64 vndklite builds), download, extract and flash it as "System Image" through custom recovery.
4. Flash vendor for A6 via custom recovery.
5. Optionally flash any custom kernel for A600X.
6. Reboot to system.
If you want typical OneUI rom then use RadicalQuack or JynxOS.
Click to expand...
Click to collapse
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
nukicius said:
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
Click to expand...
Click to collapse
never mind. i found a 64 bit vendor on this forum and decided to try it, and now it works.
just to clarify, the arm images werent working either, so its not just working because im using the right architecture
nukicius said:
never mind. i found a 64 bit vendor on this forum and decided to try it, and now it works.
just to clarify, the arm images werent working either, so its not just working because im using the right architecture
Click to expand...
Click to collapse
What steps did you follow?
I'm looking for it too, but to no avail. ALL Ares treble kernels that support 64 bits send me to download mode after flashing them.
nukicius said:
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
Click to expand...
Click to collapse
It brought you to download mode probably just because you used wrong architecture of GSI. Vendor from my previous post is intended for arm32_binder64 (A64 - not arm64) vndklite GSI images.
Viper The Ripper said:
What steps did you follow?
I'm looking for it too, but to no avail. ALL Ares treble kernels that support 64 bits send me to download mode after flashing them.
Click to expand...
Click to collapse
i just used a lineageos 18 gsi image and the treble vendor, but it turns out that while it did get to the boot screen that says lineageos (which gave me tremendous amounts of hope), it would NEVER boot up, so dont do what i did i guess lol
currently, im trying what nqnxev told me, and it should hopefully work
nqnxev said:
It brought you to download mode probably just because you used wrong architecture of GSI. Vendor from my previous post is intended for arm32_binder64 (A64 - not arm64) vndklite GSI images.
Click to expand...
Click to collapse
i got the correct image (lir-v316-220325-a64-bgZ-lite.img) and vendor (A6-Android11-stock-vendor.zip), flashed them with orangefox and its just bootlooping
nukicius said:
i got the correct image (lir-v316-220325-a64-bgZ-lite.img) and vendor (A6-Android11-stock-vendor.zip), flashed them with orangefox and its just bootlooping
Click to expand...
Click to collapse
Did you wipe all needed partitions before that (cache, dalvik, system, vendor, data)?
nqnxev said:
Did you wipe all needed partitions before that (cache, dalvik, system, vendor, data)?
Click to expand...
Click to collapse
of course i did, thats what i always do
Strange. Flash also H-Kernel (as boot image):
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/releases/download/H-V1.0-ENFORCING/H-KERNEL_V1.0_A600X.img
nqnxev said:
Strange. Flash also H-Kernel (as boot image):
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/releases/download/H-V1.0-ENFORCING/H-KERNEL_V1.0_A600X.img
Click to expand...
Click to collapse
it works!!! i did want to use the kernel at first, but i didnt know how i should flash it, thanks for clarifying!
hey, is there also a vendor for android 12? i want to give lineageos 19 a shot, and it doesnt work very well with the android 11 vendor (obviously)
i dont absolutely need it, i can stick with lineageos 18, but i just wanna try it out yk
nukicius said:
hey, is there also a vendor for android 12? i want to give lineageos 19 a shot, and it doesnt work very well with the android 11 vendor (obviously)
i dont absolutely need it, i can stick with lineageos 18, but i just wanna try it out yk
Click to expand...
Click to collapse
Android 12 works fairly well on the same vendor, but flash this recovery at first, because older OrangeFox can stuck while boot with Android 12.

Question Flashing GSIs : Safe ?

I have recently bought this phone and would like to know if someone tried flashing GSIs and if it is stable safe performant etc
Could be a good choice until custom roms appear
A GSI is typically safe because it does not contain any device-specific code. You still need to wipe user data when going from one system image to another. A couple of the most stable and continuously updated GSI projects are Pixel Experience, and the LineageOS GSIs by AndyYan. You can find those here.
V0latyle said:
A GSI is typically safe because it does not contain any device-specific code. You still need to wipe user data when going from one system image to another. A couple of the most stable and continuously updated GSI projects are Pixel Experience, and the LineageOS GSIs by AndyYan. You can find those here.
Click to expand...
Click to collapse
Heello V0latyle, quick request: can you please point me/us to a GSI install guide? =)
Kimbaroth said:
Heello V0latyle, quick request: can you please point me/us to a GSI install guide? =)
Click to expand...
Click to collapse
I'm not familiar with Xiaomi devices, so no.
Assuming they follow the AOSP model (ability to flash partitions via fastboot) you would simply use ADB to flash /system with the GSI.

Categories

Resources