Related
Greetings.
Very recently, there was an official/OTA update for P7-L10. And I subsequently downloaded and tried to update it as soon as it finishes downloading.
But, when it tried to update, it keeps failing. Is the update wrong? or is there something missing that I am not clearly seeing it?
My current version, out of the box - P7-L10V100R001C00B133SP01
and the update (online update) is (as mentioned) : P7-L10_SouthPacific_C00B620.
Please advise me on what might have went wrong?
Thank you.
piring said:
Greetings.
Very recently, there was an official/OTA update for P7-L10. And I subsequently downloaded and tried to update it as soon as it finishes downloading.
But, when it tried to update, it keeps failing. Is the update wrong? or is there something missing that I am not clearly seeing it?
My current version, out of the box - P7-L10V100R001C00B133SP01
and the update (online update) is (as mentioned) : P7-L10_SouthPacific_C00B620.
Please advise me on what might have went wrong?
Thank you.
Click to expand...
Click to collapse
Do you have custom recovery?
ibeqa said:
Do you have custom recovery?
Click to expand...
Click to collapse
Hey there, thank you for the reply.
I'm not sure, how to check. But I have never rooted this phone yet.
piring said:
Hey there, thank you for the reply.
I'm not sure, how to check. But I have never rooted this phone yet.
Click to expand...
Click to collapse
Do you have TWRP or CWM installed? Was your phone brand new or pre-owned? Do you have custom rom or stock rom?
ibeqa said:
Do you have TWRP or CWM installed? Was your phone brand new or pre-owned? Do you have custom rom or stock rom?
Click to expand...
Click to collapse
Nope, I do not have those installed. This is a brand new phone running stock rom.
Ok, I guess your phone is not branded (vodafone, orange, etc.), so get the b609 update and install it.
If you had firmware 133, how come you got SAE update? Where did you buy your phone?
ibeqa said:
Ok, I guess your phone is not branded (vodafone, orange, etc.), so get the b609 update and install it.
If you had firmware 133, how come you got SAE update? Where did you buy your phone?
Click to expand...
Click to collapse
Yep, it's not. Hmm. I am unsure as to how or where I can get the B609 update, because ever since I first laid my hands on this phone, it has been running B133 out of the box. And, since, in between then and now, I have been going to the system update to look for any update prior to this one that I am currently having a problem to update, and there was no new update (until, again, now )
Also, previously I did went online on my PC to find an update B609, and downloaded it and tried to do a local update. and unfortunately for me, it caused my phone to be soft-bricked, and back then, I have not turned on my USB debugging or did any major changes to my phone, thus, requiring me to send my phone to the service centre. So, I'm kinda weary about downloading an update online from my PC, as of now.
Well, I am not sure what SAE is, and to answer that question, again, I do not know how I may have gotten the update. I bought my phone from where I am currently living, Malaysia.
Can you make a print screen of your SAE update problem?
sorry, but um, can you please enlighten me as to what is SAE? I am truly sorry for not knowing this.
piring said:
sorry, but um, can you please enlighten me as to what is SAE? I am truly sorry for not knowing this.
Click to expand...
Click to collapse
SEA is the code Southeastern Asia
Ohhh. haha. Sorry, was wondering what SAE was. Will update as soon as possible.
ibeqa said:
Can you make a print screen of your SAE update problem?
Click to expand...
Click to collapse
Hey there, I couldn't really printscreen it, as it was in the updating process (the one with the Android bot and the black screen behind) anyway, it just it failed. That's all.
Here's however, a printscreen of the update.
piring said:
Hey there, I couldn't really printscreen it, as it was in the updating process (the one with the Android bot and the black screen behind) anyway, it just it failed. That's all.
Here's however, a printscreen of the update.
Click to expand...
Click to collapse
So OTA fails., what's the code of error (why it fails)?
Also, you can try manual update or the "3 button update" (it is described in the forum).
But the most important thing is to know why it fails.
P.S. You can take print screens from the Hisuite during update or when it fails
piring said:
Hey there, I couldn't really printscreen it, as it was in the updating process (the one with the Android bot and the black screen behind) anyway, it just it failed. That's all.
Here's however, a printscreen of the update.
Click to expand...
Click to collapse
Hi piring, I've encounter the same issue with updating from B133SP01 to B620, my set is a"SOUTH PACIFIC" model.
I even brough my set to the huawei service centre to see if the technician over there can solve the issue but unfortunately, they are just as clueless as I am..... They did a factory reset of my set and tried to install the update again but the update still fail to install. There is no error code but only "fail" word appearing. They claim it's because my set was rooted but when I have unroot my phone, it still.can't update.
So if you managed to successfully updated your set, can you share with me how to go about it? Thanks.
[email protected] said:
Hi piring, I've encounter the same issue with updating from B133SP01 to B620, my set is a"SOUTH PACIFIC" model.
I even brough my set to the huawei service centre to see if the technician over there can solve the issue but unfortunately, they are just as clueless as I am..... They did a factory reset of my set and tried to install the update again but the update still fail to install. There is no error code but only "fail" word appearing. They claim it's because my set was rooted but when I have unroot my phone, it still.can't update.
So if you managed to successfully updated your set, can you share with me how to go about it? Thanks.
Click to expand...
Click to collapse
Oh. well, to be honest, I kinda given up hopes on how to update it. And with that, I am still clueless as to how to update it. I have tried using HiSuite, but to my surprise, HiSuite mentioned that my phone is already up to date. So, I am honestly puzzled as to how my phone is pushing for an OTA, but HiSuite insists that my phone model is of current and latest update.
Sorry I am unable to help you.
piring said:
Oh. well, to be honest, I kinda given up hopes on how to update it. And with that, I am still clueless as to how to update it. I have tried using HiSuite, but to my surprise, HiSuite mentioned that my phone is already up to date. So, I am honestly puzzled as to how my phone is pushing for an OTA, but HiSuite insists that my phone model is of current and latest update.
Sorry I am unable to help you.
Click to expand...
Click to collapse
Hi piring, same thing goes for my HiSuite as well. It's kinda of sucks that the update is available but can't update. It's even more worse that Huawei service centre cannot do anything about it and just tell me forget about the update and ignore the notification. Now i have a phone with a permanent notification mark that i cannot get rid of.
P7-L10 is a good phone but the support i'm getting from Huawei service centre is really unprofessional and disappointing.
But anyway, thanks for your reply.
Hi guys I'm trying to flash Jovi's Custom Rom. I accidentally pressed the update button on my phone that allows the Latest update from t-moble to kill the phone so It wont charge. Luckily I have quite a but of battery power left and I'm franticly trying to flash a jovi's custom rom. currently I'm getting a "Failed" message when trying to flash on ODEN 3.12 here are the directions I followed to the letter but no success.
First Thing Your Going To Do Is Download Both graceqltetmo_N930TUVU1APGC_Stock_Deodexed.zip And N930T_Note7_Adb_Rootkit_And_Odin_Pack.zip Files From The Download Link Section Below.
2. Extract All The Files From N930T_Note7_Adb_Rootkit_And_Odin_Pack.zip Onto Your PC Desktop, You Will Then Have Eight Files On Your Desktop Which Will Be MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRMW ARE.tar.md5, graceqltetmo_N930TUVU1APGC_Stock_Deodexed.img, SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe , adb-setup-1.4.3.exe, CommandPrompt.bat, Odin3.exe, Odin3.ini, And sun7.
3. If You Haven't Setup ADB On Your PC Yet Or Installed The Samsung USB Drivers, Just Open Both Executables SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe And adb-setup-1.4.3.exe And Complete Both The Setup Processes. Once Done You Should Now Have A Created ADB Directory Which Should Be Located At C:\adb. Once ADB Is Setup, Place The sun7 Folder And CommandPrompt.bat Inside Your ADB Folder From The New Directory.
4. Now Put Your Phone Into Download Mode By Powering Off Your Device First And Then Hold The "Volume Down+Home+Power Buttons" At The Same Time Until You See The Download Mode Warning Screen. Now Press The "Volume Up Button" And Then Insert Your Samsung USB Plug.
5. Now Open Odin3.exe, Click On "AP", Select "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_ FIRM WARE.tar.md5", And Then Click On "Start". Wait For A Couple Of Minutes For The Modified N930PVPU1APH3 Engboot Firmware To Finish Installing. After this step it says failed so this is where I'm suck currently at the bootloader. thanks guys for your help
Does your phone still work?
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
Does your phone still work?
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
It still works its just stuck at the boot loader. I think when I attempted to flash the stock rom back on the phone It wiped everything. Honestly I'm not trying to root I'm just trying to install the stock rom
You should be able to download it in Sammobile, they usually have every firmware available for Samsung phones. Then you would want to checkout the N7A their accepting beta testers for v2 of the app. Maybe check with them before to see how you should proceed on reinstalling the initial firmware to avoid the update again.
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
You should be able to download it in Sammobile, they usually have every firmware available for Samsung phones. Then you would want to checkout the N7A their accepting beta testers for v2 of the app. Maybe check with them before to see how you should proceed on reinstalling the initial firmware to avoid the update again.
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
Ok thanks. I'm doing that now Ill keep you posted of how it goes. thanks for the help I appreciate it.
[email protected] said:
Ok thanks. I'm doing that now Ill keep you posted of how it goes. thanks for the help I appreciate it.
Click to expand...
Click to collapse
No problem I've been using package disabler pro & N7A's shield for a while now and haven't had any issues. Plus N7A is a really great community especially when other forums don't provide much assistance. I think about 80% off the people still using the Note 7 have either joined N7A or the N7 Rebels (I've heard they charge for their app & assistance but haven't verified myself). ?
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
No problem I've been using package disabler pro & N7A's shield for a while now and haven't had any issues. Plus N7A is a really great community especially when other forums don't provide much assistance. I think about 80% off the people still using the Note 7 have either joined N7A or the N7 Rebels (I've heard they charge for their app & assistance but haven't verified myself).
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
Ok cool I just signed in to N7A site. It looks really informative. I downloaded the firmware from sam mobile as you suggested also I have about 10 more minuits before its done downloading. ill keep you posted.
Ok I'd check the help and tutorials section for re-flashing firmware after an update, cause I'm not sure how you would avoid getting the update again unless you have a some sort of shield or package disabling app in place.
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
downloading the shield now. hopefully this works because I had to go back to using my note 3. and I'm like OMG what a major downgrade
[email protected] said:
downloading the shield now. hopefully this works because I had to go back to using my note 3. and I'm like OMG what a major downgrade
Click to expand...
Click to collapse
I have a Note 5 as a backup and even that feels like a major downgrade I can't imagine what a Note 3 would be like.
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
I have a Note 5 as a backup and even that feels like a major downgrade I can't imagine what a Note 3 would be like.
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
Hey just giving you an update. Phone still stuck at boot loader but I have watched the lady known as catwoman video on youtube. I have downloaded and unzipped all the files and even tried to flash without success. Oden keeps giving me a fail. The only problem is with the smart switch application she recommended for download. I downloaded it and ran the app like suggested. It said that the my device is unsupported by smart switch. I cam to the conclusion that this is the way I should have started vs wiping everything which is the reason I'm stuck at the boot loader because there is no data on my phone. Here are the steps I took to get past this problem.
1. Reinstalled Smart Switch, but after the re- install no success.
2. I reopened Smart Switch and clicked the tab that says "MORE" then on Emergency Software & instillation. I followed the steps which included imputing my device model number and S/N. Did that but my device is still reading as a unsupported device on smart switch. I'm in progress of contacting her to see if she or any of her team as any ideas. Hopefully I'm back up and running soon. I cant wait for the note 8 so I can be done with this
Hey just giving you an update. Phone still stuck at boot loader but I have watched the lady known as catwoman video on youtube. I have downloaded and unzipped all the files and even tried to flash without success. Oden keeps giving me a fail. The only problem is with the smart switch application she recommended for download. I downloaded it and ran the app like suggested. It said that the my device is unsupported by smart switch. I cam to the conclusion that this is the way I should have started vs wiping everything which is the reason I'm stuck at the boot loader because there is no data on my phone. Here are the steps I took to get past this problem.
1. Reinstalled Smart Switch, but after the re- install no success.
2. I reopened Smart Switch and clicked the tab that says "MORE" then on Emergency Software & instillation. I followed the steps which included imputing my device model number and S/N. Did that but my device is still reading as a unsupported device on smart switch. I'm in progress of contacting her to see if she or any of her team as any ideas. Hopefully I'm back up and running soon. I cant wait for the note 8 so I can be done with this
Every since accepting and updating my Moto G6 (US Retail) to 9.0 (PPS29.118-11-1), it has been laggy. The lags seem to happen mostly when there is some type of I/O operation (like opening an app), or when a background app is doing something on the network - email getting delivered, etc. I've rebooted to recovery, and wiped the cache, but now I am considering doing a factory reset. Anyone else experiencing this? Anyone got any ideas that don't involve me reloading all my apps and data?
Thanks in advance.
-Chris
yeah, i'm also getting some lagginess. it's mostly when i unlock my phone using the fingerprint reader. the transition takes a super long time. i feel it's mostly the animation that's causing the ton of lag. initially after i updated to 9, opening and closing apps would take forever as well. but changing the animation with nova launcher made it a bit snappier; although it's still slower than 8.
No lag here
You guys might want to do a clean firmware install, I don't have any lag on this version I didn't take the OTA just flashed the firmware.
I think I may have resolved at least some of the issue. First, I use a SD card to hold some pictures, and videos, and other data (no apps). I reformated the card from android, and this resolved about 80% of my lag issues. Not sure if there is some kind of disk polling that is done, but with the clean format on the SD card, things most run smoothly now. The other area I'm still seeing a little lag is when scrolling over something in apps like google news where it is trying to pull a video or large image file and there seems to be some delay in the network. At this point, I think the issue is in my wifi network, not my phone (although I'm still no ruling it out). But at least it is better.
kc6wke said:
You guys might want to do a clean firmware install, I don't have any lag on this version I didn't take the OTA just flashed the firmware.
Click to expand...
Click to collapse
Dead on. While I was able to make my G6 better, it was still laggy at times. Yesterday, I bite the bullet, backed up my data, and did a clean flash of the current firmware. Now the phone is smooth as glass. Good call.
Thanks,
-Chris
Noticed the same thing. Reflashed for some other reason and instantly saw the lag that had been getting more and more noticeable disapear.
What do you mean by 'reflashing'? Is that the same as 'restore to factory settings?'
I've read a thread on the Motorola forum where users have done that, with no noticeable results.
Nightwing-1 said:
What do you mean by 'reflashing'? Is that the same as 'restore to factory settings?'
I've read a thread on the Motorola forum where users have done that, with no noticeable results.
Click to expand...
Click to collapse
No, I literally reflashed the ROM.
I downloaded the current official ROM from here:
https://mirrors.lolinet.com/firmware/moto/ali/official/RETUS/
(note the link is for the US Retail channel distribution, if your phone is not RETUS channel, find the matching ROM for the channel your phone is.)
Once downloaded, I used the RSD lite app to flash the phone.
http://download.canadiancontent.net/RSDLite.html
You can google exact directions to use the tool, but basically, you reboot your phone to the bootloader, start RSD Lite, connect the USB cable (I had to use the factory cable on a USB 2.0 port to make this work), select the ROM file, and press Start.
Note: This will wipe your phone! So make a backup of your data.
I'm not familiar with flashing ROMs etc. And I don't want to mess up my phone any further.
Despite the fact that Motorola insist that there is no problem, I'm hoping their forum will convince them that there is.
Thanks for the help, but I'll keep it as it is. Meanwhile I'll be looking around for a dependable Android One phone.
I found one thing that helped:
Go in to 'Settings', 'system', 'Motorola privacy'' and uncheck both the slides in the menu. And I disabled the Google feed on my start screen (Swipe access).
The restart your phone.
The phone is a lot less laggy after that.
update! the August security patch update kind of helped with the lock screen lag I was experiencing.
blueberryapple said:
update! the August security patch update kind of helped with the lock screen lag I was experiencing.
Click to expand...
Click to collapse
Just did a check on my phone, and there is an update on the RETUS channel.
PPS29.118-15-11 / Security patch level: August 1,2019
A few questions about this. Through pure dumb luck, I didn't accept the Pie update, and have turned off automatic system updates in the Developer's options. It gives me a notice of new firmware a few times a day, which I decline, but so far has not updated without my consent. I realize it may do that at any moment regardless of the Developers setting.
So I'm still on Android 8, and would be delighted to stay there. But, if I'm forced to go to 9, would I be able to flash 8 again using the files here? Would that accomplish anything, or would it still insist on going to 9 after I had flashed 8?
The earlier reference to the "current official" rom - does that mean the latest 9 rom?
Why would installing the same v9 rom over again produce any different result from the OTA update to that rom?
Is there any way to turn off the firmware update notices? I've tried lots of things, but they still come.
Just trying to figure out what my options are, and what I should do. There's a 42-page thread on the Lenovo forum about this problem, with no indication that Lenovo/Motorola will lift a finger to fix it, apparently being content to see some unknown number (perhaps all) of the G6's ruined by the update to 9. I called Moto CS, and they blamed Google for the problem. Obviously, I bought the wrong brand of phone. Actually, it's my first smart phone. It seems beginners luck is a myth. At least I know better than to buy a Lenovo computer when Windows 7 becomes dangerous in January.
Anyway, I would appreciate any comments on the G6 thing.
Hello, is it required to have unlocked bootloader when doing re-flashing the official rom?
ici0606 said:
Hello, is it required to have unlocked bootloader when doing re-flashing the official rom?
Click to expand...
Click to collapse
I posted this in another related thread:
-------------------------------------------------------
JimmiH on the Lenovo forum has found "Lenovo Moto Smart Assistant", a new utility from Motorola, which is installed on your PC (Win 7 or 10). Included in the utility is a "rescue" function which appears to do the same thing as RSD Lite - resurrect a phone from any software issues. It downloads the correct official rom and reflashes it to the phone. JimmiH will be reporting back over the next few weeks as to whether the rescue has permanently solved his Pie lagginess issues.
The advantage of this LMSA over RSD Lite is that it runs on Windows 10, and presumably works with USB3 ports, while apparently neither was the case with RSD Lite. And of course you don't have to go hunting for the right rom.
----------------------------------------------------------------
My understanding is that this utility does not require unlocking, and it does not root the phone.
Hello, I tried LMSA for flashing, but it says not supported device, I have model XT1925-4.
ici0606 said:
Hello, I tried LMSA for flashing, but it says not supported device, I have model XT1925-4.
Click to expand...
Click to collapse
RSDLite will work on Windows 10, I have been using it, even on the newest Windows 10 version 1909. It will not work on usb 3 ports though. If you have any USB 2 ports available, plug the cable into one of those and it will work.
xfrobex said:
RSDLite will work on Windows 10, I have been using it, even on the newest Windows 10 version 1909. It will not work on usb 3 ports though. If you have any USB 2 ports available, plug the cable into one of those and it will work.
Click to expand...
Click to collapse
Hm I have just USB 3 on my PC, ok will try on some older one.
But is it required to unlock bootloader, when using RSD Lite?
Thanks.
ici0606 said:
Hm I have just USB 3 on my PC, ok will try on some older one.
But is it required to unlock bootloader, when using RSD Lite?
Thanks.
Click to expand...
Click to collapse
No. RSDLite doesn't require unlocked bootloader.
Peabody424 said:
I posted this in another related thread:
-------------------------------------------------------
JimmiH on the Lenovo forum has found "Lenovo Moto Smart Assistant", a new utility from Motorola, which is installed on your PC (Win 7 or 10). Included in the utility is a "rescue" function which appears to do the same thing as RSD Lite - resurrect a phone from any software issues. It downloads the correct official rom and reflashes it to the phone. JimmiH will be reporting back over the next few weeks as to whether the rescue has permanently solved his Pie lagginess issues.
The advantage of this LMSA over RSD Lite is that it runs on Windows 10, and presumably works with USB3 ports, while apparently neither was the case with RSD Lite. And of course you don't have to go hunting for the right rom.
----------------------------------------------------------------
My understanding is that this utility does not require unlocking, and it does not root the phone.
Click to expand...
Click to collapse
Count me among those watching this thread, in particular looking for evidence that LMSA (or RSD Lite) actually eliminates the lag problem for more than a few days. My phone is a bone stock model XT1925-6 running Android 9, PPSS29.118-15-11-2. Lag improved after the October update but returned in about a week.
I appreciate the efforts of this group in trying to resolve this problem.
My sister-in-law recently switched to TMo and ended up with a "free" G7 Power running Android 9. It's very smooth with no lag at all, so Moto apparently knows how to resolve this problem, they're just not helping us with the G6.
Any ideas on how to get firebase notifications going ? i have set up GMS successfully with Googlifier but not notifications .
No at the moment you don't. I installed GMS via Googlefier and cannot receive push notifications from Gmail, Calendar (or any Apps that uses Google Play-Service Push notifications API). Microsoft Authenticator won't work also, as the above-mentioned is missing from the GMS installed by Googlefier.
Luckily, WhatsApp push works.
So i managed to get push notifications going again by redoing setup and then freezing GSF with Multi tool - YAY!
Last bit of the puzzle is that i seem to be stuck on the .121 software which i downgraded to so i could get Google going - now when i click check for update on the phone or in Hisuite, it doesnt show any new updates (i was on .184 before downgrading). any ideas why?
Progress though
mahdibassam said:
So i managed to get push notifications going again by redoing setup and then freezing GSF with Multi tool - YAY!
Last bit of the puzzle is that i seem to be stuck on the .121 software which i downgraded to so i could get Google going - now when i click check for update on the phone or in Hisuite, it doesnt show any new updates (i was on .184 before downgrading). any ideas why?
Progress though
Click to expand...
Click to collapse
Software updater doesn't work anymore once you reflash using hisuite proxy. Your only way to upgrade now is to rely on hisuite proxy
Riyal said:
Software updater doesn't work anymore once you reflash using hisuite proxy. Your only way to upgrade now is to rely on hisuite proxy
Click to expand...
Click to collapse
But if I flash another rom with hisuite proxy it's going to reset the phone again isn't it? How can I update to latest release without losing data?
Seems liked i have wrecked my device - i forced an update to .182 using hisuite proxy and hisuite. now the phone boots up is fine for 20-30 seconds and then just reboots. any ideas how to fix?
mahdibassam said:
Seems liked i have wrecked my device - i forced an update to .182 using hisuite proxy and hisuite. now the phone boots up is fine for 20-30 seconds and then just reboots. any ideas how to fix?
Click to expand...
Click to collapse
You used the wrong version for your device.
Go to settings about phone and see if you still have your IMEI. If it's empty then you corrupted your modem partition and you can't fix it.
If it's still there then boot yo eRecovery and do a reset and update.
Riyal said:
You used the wrong version for your device.
Go to settings about phone and see if you still have your IMEI. If it's empty then you corrupted your modem partition and you can't fix it.
If it's still there then boot yo eRecovery and do a reset and update.
Click to expand...
Click to collapse
Yup that's what I figured, imei was blanked. I I sent it for warranty repair last week, good thing my main device is a oneplus 8t
mahdibassam said:
So i managed to get push notifications going again by redoing setup and then freezing GSF with Multi tool - YAY!
Last bit of the puzzle is that i seem to be stuck on the .121 software which i downgraded to so i could get Google going - now when i click check for update on the phone or in Hisuite, it doesnt show any new updates (i was on .184 before downgrading). any ideas why?
Progress though
Click to expand...
Click to collapse
In my tries freezing GSF makes the gps location accuracy really awful in all app using gps and i don't know why. Really bad.
denzel09 said:
In my tries freezing GSF makes the gps location accuracy really awful in all app using gps and i don't know why. Really bad.
Click to expand...
Click to collapse
Not for me, everything worked perfectly fine. Until I F'd it up with the manual update I mentioned earlier haha.
mahdibassam said:
Not for me, everything worked perfectly fine. Until I F'd it up with the manual update I mentioned earlier haha.
Click to expand...
Click to collapse
Really weird, that problem is a common problem for many i have seen after freezed gfs.
Like this:
https://www.reddit.com/r/Huawei/comments/ha2sez
Hi everyone!
I've tried some tutorials and in the end I have device is not play certified and can't log in to account.
I will donate for the step by step help
Thanks
Can't even get HarmonyOS beta profile anymore.
Nookie 3:16® said:
Can't even get HarmonyOS beta profile anymore.
Click to expand...
Click to collapse
I just did update last night. There are guides how to on YouTube.
I stand corrected. Thank you
I've tried old method, but I can't install and activate this chinese application in first step after restoring the app.
I always get network error
Screenshot
Captured with Lightshot
prntscr.com
Try downgrading to EMUI 11 first and see if that makes a difference
ultrajapa said:
Try downgrading to EMUI 11 first and see if that makes a difference
Click to expand...
Click to collapse
I've found how to. Downgrading now. I'll report
So the process is easy.
1) Downgrade to latest EMUI
2) Follow these video
Thanks ultrajapa for the video.
3) Install all and you can now again upgrade to Harmony OS and it works well.
Now I have only the problem that I did uninstalled MicroG and can't loggin to my second account.
I am afraid to reinstall it for logging in.
Did anybody tried?
shffhm said:
So the process is easy.
1) Downgrade to latest EMUI
2) Follow these video
Thanks ultrajapa for the video.
3) Install all and you can now again upgrade to Harmony OS and it works well.
Now I have only the problem that I did uninstalled MicroG and can't loggin to my second account.
I am afraid to reinstall it for logging in.
Did anybody tried?
Click to expand...
Click to collapse
I'm encountering an error when I try launching Google Assistant app. It prompts an error in Chinese "to check network connection, because of strange network activity detected". Doesn't allow me to continue after that.
Anyone having the same issue? I'm on EMUI11.
Lighthouse2602 said:
I'm encountering an error when I try launching Google Assistant app. It prompts an error in Chinese "to check network connection, because of strange network activity detected". Doesn't allow me to continue after that.
Anyone having the same issue? I'm on EMUI11.
Click to expand...
Click to collapse
Managed to install it after a 2nd round. So working fine now. Thanks...
shffhm said:
So the process is easy.
1) Downgrade to latest EMUI
2) Follow these video
Thanks ultrajapa for the video.
3) Install all and you can now again upgrade to Harmony OS and it works well.
Now I have only the problem that I did uninstalled MicroG and can't loggin to my second account.
I am afraid to reinstall it for logging in.
Did anybody tried?
Click to expand...
Click to collapse
Is your push notifications working also with harmony os? If so what method did you use to get to work? Worried about upgrading from emui 11 to harmony os with Google and push working with emui 11 as of today.
Currently freezing gsf to get push notifications working.
my mate x2 arriving next week, found the following video Google, anybody tried it or should I use the above one...
Thanks....