Solved-Someone point me in the Right Direction for getting YouTube TV (YTTV) working. - Android Auto General

I know it's a bit to read but here's the deal. I have had 3 different Android Head Units, a forth on the way. On one unit an AllWinner R16 branded Eonon GA7166 I have been able to play my YouTube TV app... On all others, and even on the same unit with different firmware, it doesn't play. On all units / builds of Firmware the regular youtube / amazon video work just fine.
What can i check to see what's what? There's gotta be some simple / stupid change to a file that makes it work. Anyone have any insight?
So i have the unit on my desk playing the YouTube TV app, what can i check in the files to see why? When it first didn't work after i subscribed to the service I emailed Eonon (the place i bought the unit from) and they sent me a new firmware R16-20170509 that played the streams just fine. When i upgraded from that firmware, finding firmware here it was again broken. I've played with many settings and files but in the end thought i bricked my unit... I have since shorted Key1 Pin to Key GND top get it reading the working firmware from the USB and I'm back to where I need to be. Problem is that i want to get my newer PX5 4GB unit working cause my old R16 is kind of a pig.
Any help will be appreciated.
Additional Info:
I checked to see if the play store was "Play Protect Certified" and it wasn't but I just went to check the wording and that option is not showing up on the "working" Android Head Unit's play store settings. I think this may be where i need to focus my attention... (usually it says something like "Not play protect certified")
Thank you!

Just floating this one back to the top...

For anyone that may be having the same problem...
basically it's looking for Widevine CDM library files, i stumbled onto this thread using a magisk module that puts the files where needed and everything is working just fine...
https://forum.xda-developers.com/nexus-6/themes-apps/magisk-module-nexus-6-angler-widevine-t3781045

Related

[Q] Mirrorlink

Is there any way to get mirrorlink working on the Nexus 6?
Not sure what mirrorlink is. Do you mean Miracast? If so, I don't believe it works. Chromecast works great for screen mirroring your Nexus 6 to a HDTV.
Found this searching for compatibility... One application for MirrorLink for those that didn't know is Pioneer head units like the AppRadio so you can mirror your phone's screen onto it...
any luck?
Is MIrrorlink compatible with the nexus 6? If so, anybody know how to enable it?
My understanding....
spillytime said:
Is MIrrorlink compatible with the nexus 6? If so, anybody know how to enable it?
Click to expand...
Click to collapse
From what I have been told neither Mirrorlink nor AppRadio are compatible with Lollipop in general and the nexus 6 specifically. Your only option at this point is Android Auto which works well if you have the supporting HU from Pioneer. However, at this time, not many developers have made their applications compatible with it. When the 2016 car models start rolling out with AA preinstalled in their HU, then I believe we will see a flood of apps moving into the platform.
Google needs to start supporting MirrorLink on Nexus phones. I have a Nexus 6 and the Pioneer AVH-4100NEX.
Android Auto has been a horrible experience so far. It worked at first, for a couple of months, and then I don't know why (Android update maybe?) but suddenly it stopped working and hasn't worked since.
Even when it did work, there were some VERY annoying things:
1) if your phone is plugged into the USB cable, Android Auto launches, and as long as you're still plugged in I couldn't find any way to temporarily get out of Android Auto (such as if I want to check my email or some other app on the phone). Or if I want to listen to a YouTube video (or watch it from my phone, lets say I'm the passenger ok?), then I'd have to un-plug the USB which means my phone isn't charging.
2) The other really annoying thing is that Android Auto limits developers in how many screen clicks user would need to do to get to content (including, clicking the down arrow to browse through a long list). Where this is a problem for me for example, is my Spotify playlists. Android Auto will only display about 10 or so of my playlists.
So I find myself disconnecting the phone from the cable and just streaming over bluetooth.
In fact at first I was really upset that my phone was no longer launching Android Auto at all and stopped working with my Pioneer AVH-4100NEX, but now that I am just able to leave the phone charging all the time and have full access to my phone apps, all my spotify playlists, and am just streaming over bluetooth I'm not really sure I want to fix Android Auto.
What I really want at this point is to just MIRROR my phone screen to my head unit. This way no matter what I want to watch or listen to, it doesn't matter if "Android Auto" supports it or not. I can put on YouTube videos, or anything I want.
So this gets me back to Mirror Link, I don't know why Google or Motorola is not supporting it, MirrorLink from what I've seen should be another viable option for Android users (and for now I think a better option than Android Auto)
I'll be posting this reply as a separate topic as well, here and in Google's forums because it needs some attention.
Thanks
Ill repost this here as well
You have to take into account the many laws in different places concerning cell phones and driving. In some places you can get a ticket just for having your phone in your hand while driving. And now they are cracking down even harder on it. Also some OEM have been known to block some cars from working with devices like that. It was found that one samsung device had a list built into the OS that blocked a number of different cars from working with Android Auto. This I can only assume came from the Car manufacturer.
If I had a nickel for all the distracted drivers around me, well, I'd have a lot of nickels!

Tyre Pressure Monitoring System (TPMS) For MTCB Head Units

TPMS has beenn mentioned a few times in the original thread, but AFAIK no one has managed to find out how/if any TPMS modules will work. I bought a TPMS module from Klyde, it comes with 4 valve caps and a strange mini USB thing that I assume allows you to plug another mini USB device into the unit at the same time.
Unfortunately I cant get it to work with the built in TPMS app that started appearing in ROMs from June either on my old unit or my new one, I ve tried searching for the device in the BT app and the BT in settings but I get nothing, I m awaiting a response from Klyde.
If anyone has any ideas on how to get it to work then let me know, but its good to see TPMS hardware available for these devices - even if its not working . . yet !
Can you share link from TPMS module?
My brain is stuck what is TPMS? I am sure I should know but i don't get it
Guess youre talking about Tire Pressure Metering Sensor?
would you probably add a hint to your OP and title so others know what you mean? Remeber the non-english-speakers here
Yes this is it (Tire Pressure Metering Sensor).
dark alex said:
My brain is stuck what is TPMS? I am sure I should know but i don't get it
Guess youre talking about Tire Pressure Metering Sensor?
would you probably add a hint to your OP and title so others know what you mean? Remeber the non-english-speakers here
Click to expand...
Click to collapse
Yes, its Tyre Pressure Monitoring System, sorry @dark alex.
Billkaza said:
Can you share link from TPMS module?
Click to expand...
Click to collapse
I simply bought it from Klyde, there was no link, I guess you have to ask them.
It turns out it cant be used with DAB, which is why I cant get it to work - the cable to attach it is the same as the DAB module they sent me.
I m not sure if its BT or maybe NFC or something. I ll report back with results when I get it to to work
Does anybody try this TPMS solution with his HU?
http://www.aliexpress.com/item/Smar...77_80_61,searchweb201644_5,searchweb201560_10
Does the app work in landscape mode?
Can the app start with background mode?
Does the external (valve cap) sensor show accurate value?
I have been using this TPMS system in Volkswagen Polo and my MTCB head unit since 3 months now and couldn't be happier with it.
It activates when you press the button because it invokes the reverse camera display source every time you call it into action.
http://www.aliexpress.com/item/Stee...1644_2_79_78_77_82_80_62_81,searchweb201560_6
I have tried these two models purchased at Amazon and they work perfectly. I have them installed on my cars.
The only drawback is that you need Bluetooth 4.0 and HuiFei radio does not have it. I have commissioned an RX USB Bluetooth for Android on Deal Extreme, to see if it works.
So far I'm seeing it in my S5 Galaxy.
All the links:
http://www.amazon.es/Sensores-Inter...2?ie=UTF8&qid=1448974215&sr=8-2&keywords=tpms
http://www.amazon.es/Sistema-Sensor...?ie=UTF8&qid=1448974381&sr=8-67&keywords=tpms
http://www.dx.com/es/p/v40-usb-2-0-...s-android-os-black-silver-250228#.VoqxKORgnDc
http://android.myapp.com/myapp/detail.htm?apkName=com.eckom.tpms
Turns out you need a special lead that I wasnt sent orignally, it plugs into one of the sockets on the back of the unit, theyre sending me one, I ll post again when I get it.
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Dont know, ask the seller.
But in any case if it works with a Joyous unit it will work with ANY MTCB head unit. There is no such thing as a "Joying" head unit - Joying/CarJoying are simply re-sellers of Shenzhen Joyous head units.
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Yes I think.
It looks made specifically for these HUs. So I supposed they tested them.
And screens look like built-in TPMS app that I got preinstaled on my HU (KGL). So I supposed it should work.
But I would preffer ecternal sensors, not ibternal ones. I have 4x4 which reqiires regular tire rotation and ibternal sensors are not suitable as I would need to remove and refit them on every tire rotation.
Is there external versio? I couldnt find it on AlliExpress.
The one I mentioned in my first post has valve mounted sensors and obviously works with MTCB head units
pa.ko said:
Yes I think.
I would need to remove and refit them on every tire rotation.
Click to expand...
Click to collapse
Why? Sure, if they are somehow hard coded to location its sort of funny when they might not match the picture, but you only have 4 tires. Its pretty easy to check them when they are low.
You want internal sensors for TPMS. Less chance for losing them.
http://www.ebay.com/itm/Cable-Bueto...Tire-Pressure-Monitoring-System-/271315933336
I understand the point about tire rotation and internal sensors. Would it be possible to make the same rotation in the app, since all sensors are doing the same thing anyway? Eg. If you rotate your right front to right rear, make the same in the app to correspond with the sensor location?
Sent from my Mi-4c using xda premium
Yes, mapping is possible. Depends on product.
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Hi All,
I have also interest for this. Somebody could give some information ? It works, or any other bluetooth type, using with external attached bluetooth 4.0 dongle ?
Well, I found out most of the connections for the TPMS as Klyde didnt send me a lead - power and ground were easy same as the DAB box, then, as its just a mini usb connection its just data + and data -, I know where the one of those wires goes, and narrowed it down to 2 pins for the other, I ve tried both pins and several versions of the TPMS app, but cant get anything. I ve tried looking for BT devices on my phone I thought I found 1 but my phone wouldnt connect and the headunit's BT wouldnt see it, my phone wouldnt connect and after removing all the batteries on the TPMS it still showed up so it couldnt be that. Totally stumped, just cant get it to work.
TPMS-Type
Let me inform you that for some time I'm trying to find a TPMS system that works well with Android auto MTCB-C I have made several purchases and placements from various vendors I will mention my experience to help future stakeholders.
For GS, KD, and JY machines, the following set works very well:
https://www.aliexpress.com/item/TPMS-for-SilverStrong-Android-CAR-DVD-Car-Tire-Pressure-Monitoring-System-4-Sensors-Alarm-Tire-Temperature/32803916037.html?spm=2114.13010608.0.0.IU13AC
It has its own very friendly app and it works with automatic start-up in the background and immediately informs if something goes wrong with the tires of the car, I recommend it for the above!
But last time I discovered another type with external valves that works very well with a Klyde machine and that's it:
https://www.aliexpress.com/item/Car-Tire-Pressure-System-TPMS-Only-for-Klyde-Brabd-Car-DVD-Radio-display-the-tempreature-and/32806152062.html?spm=2114.13010308.0.0.pPlup1
OR
https://www.aliexpress.com/item/TPMS-Tyre-Pressure-Monitoring-System-For-Car-Android-DVD-GPS-Radio-Player-Car-Stereo/32808928613.html?spm=2114.13010308.0.0.OJcJUk
I believe I helped my friends.
spirosme said:
Let me inform you that for some time I'm trying to find a TPMS system that works well with Android auto MTCB-C I have made several purchases and placements from various vendors I will mention my experience to help future stakeholders.
For GS, KD, and JY machines, the following set works very well:
https://www.aliexpress.com/item/TPMS-for-SilverStrong-Android-CAR-DVD-Car-Tire-Pressure-Monitoring-System-4-Sensors-Alarm-Tire-Temperature/32803916037.html?spm=2114.13010608.0.0.IU13AC
It has its own very friendly app and it works with automatic start-up in the background and immediately informs if something goes wrong with the tires of the car, I recommend it for the above!
But last time I discovered another type with external valves that works very well with a Klyde machine and that's it:
https://www.aliexpress.com/item/Car-Tire-Pressure-System-TPMS-Only-for-Klyde-Brabd-Car-DVD-Radio-display-the-tempreature-and/32806152062.html?spm=2114.13010308.0.0.pPlup1
OR
https://www.aliexpress.com/item/TPMS-Tyre-Pressure-Monitoring-System-For-Car-Android-DVD-GPS-Radio-Player-Car-Stereo/32808928613.html?spm=2114.13010308.0.0.OJcJUk
I believe I helped my friends.
Click to expand...
Click to collapse
Thanks for your post - I have the Last type, Klyde themselves supplied me with it, but they did not send me the lead and they did not reply to me when I asked for it, so I had to make one, but I still cannot get it to work, could you post a picture of the lead (the end that plugs into the head unit) so I can see which wires go where (I have seen the picture in your 3rd link before, but I cannot see where all the wires go) ?

"Pumpkin" KD-C0248 updates

I have been reading through the forums looking for solutions to specific issues that I am having with my head unit. I have had it for a month and after 3 weeks the wifi gradually stopped working so I can't directly connect to the Internet currently with the head unit.
So while I was on vacation I attempted to update the firmwares to more current...
Original MCU was KLD6 V2.83 I am now running the latest...
update.img is now one of Mal's from August iirc... anything any newer than that would just sit at the boot screen,
Problems started when I updated the MCU without backing it up...
Issues as follows...
1. Radio no tune, no sound (Setting up factory settings corrected this by trial and error)
2. Bluetooth pairs but no activity...(Setting up factory settings corrected this by trial and error)
3. DVD plays audio no video to head unit. Factory did not require the wire to be grounded. Went back and grounded and still will not play video sound is ok. So the question here is how do I get video on the head unit? I have not found a setting for this...
4. WiFi still broken (it did work for about 5 minutes then failed) No MAC address populated in the settings.
I ordered a 3G dongle however was shipped one that does not work with my unit nor does it work on the network here. (800/1800 was shipped which does not work here in the states) So I ordered another hoping that I get the correct one....

Recommendations for head unit.

I would like some recommendations for a double din head unit. I wanted to have nav, rear view cam support, aux and 4G/WiFi.
I was going to make my own system with a raspberry pi, but after pricing stuff out I'm gonna be looking at a similar price of $200+. So I would rather just buy an android head unit since that's the OS I want to use anyway and it's still not that smooth on a rasperry pi. Although Google is going to offically suport it soon.
Thanks
Sent from my VS985 4G using Tapatalk
Check on Crutchfield.com. I've only seen one unit that runs wifi(its alot more the $200), and havent seen one that runs cell band
Check out 'Joying'. You will have it in a few days.
If they have a package for your car then she is plug&play. Many of the units are the same but come with different stuff so the price changes. Some have volume knobs - do get that.
Joying... (can't post links so you have to type in)
carjoying-dot-com
I personally got this setup for my Nissan Frontier truck...
and i now have the 5.1 update hardware to update from kitkat. You might want to ask for the 5.1 models.
Yeah after I have been looking around the joying is probably what I'm gonna go with.
Sent from my VS985 4G using Tapatalk
The unit I got was the 'JY-NQ128'.
If you search for it on the joying site you will see it is set up for Nissan cars/trucks meaning they include plug and play cables for that vehicle so it's working in minutes.
That part number also comes with backup camera, gps stuff, etc. It has a volume knob on the top. Some other packages will have the same unit at a different price but come with say an OBD2 dongle and a volume button in the middle or no buttons or no navigation. Some have a DVD player.
A note about navigation... You have to ask for it. They will then send you a link for the 'IGO' software and maps. You install it on the blank SD card they include. IGO is kinda a standard I think but you can also use Google maps, Here, Waze, whatever you like. In settings you just set the nav button to whatever.
You can buy cables, backup camera, etc from their site if they don't have a package for your car.
I have bad ears so can't be trusted on its ability to play music but seems to work fine. I bought it mostly for its backup camera, navigation and of course the powerful Android system. My calendar is on there, email, etc.
Nice unit 1024x600 screen too.
daveEM said:
The unit I got was the 'JY-NQ128'.
If you search for it on the joying site you will see it is set up for Nissan cars/trucks meaning they include plug and play cables for that vehicle so it's working in minutes.
That part number also comes with backup camera, gps stuff, etc. It has a volume knob on the top. Some other packages will have the same unit at a different price but come with say an OBD2 dongle and a volume button in the middle or no buttons or no navigation. Some have a DVD player.
A note about navigation... You have to ask for it. They will then send you a link for the 'IGO' software and maps. You install it on the blank SD card they include. IGO is kinda a standard I think but you can also use Google maps, Here, Waze, whatever you like. In settings you just set the nav button to whatever.
You can buy cables, backup camera, etc from their site if they don't have a package for your car.
I have bad ears so can't be trusted on its ability to play music but seems to work fine. I bought it mostly for its backup camera, navigation and of course the powerful Android system. My calendar is on there, email, etc.
Nice unit 1024x600 screen too.
Click to expand...
Click to collapse
Does your unit have android auto Capabilites?
lbus9168 said:
Does your unit have android auto Capabilites?
Click to expand...
Click to collapse
Not sure. I've not researched Android Auto but I suspect it is totally limited (AA).
My unit is full blown Android. You have to be careful here. For example streaming a movie while driving is possible. It is initially shut off in settings but you can turn it on.
The unit is like a Nexus phone. No limitations.
daveEM said:
Not sure. I've not researched Android Auto but I suspect it is totally limited (AA).
My unit is full blown Android. You have to be careful here. For example streaming a movie while driving is possible. It is initially shut off in settings but you can turn it on.
The unit is like a Nexus phone. No limitations.
Click to expand...
Click to collapse
I think the biggest thing im looking for is a nice driving friendly UI, with good navigation. Android auto ticks all my requirements.
How about “Pumpkin”?
Android 5.1 Lollipop Stereo https://www.amazon.co.uk/Pumpkin-UNIVERSAL-Mirror-link-Bluetooth/dp/B0197X0IKM

Android head unit choice for BMW e90 U.K

Hi Peeps
Really sorry if im in the wrong forum and im here to learn but hope someone can point me in teh correct direction
Im in the U.K and we dont seem to be able to buy Joying head units which seem to be popular in the states.
Im looking at Eonon or Xtrons mainly with the quad core processors and 5.1 Lollipop.
Is there anything i should be looking for or best avoided?
Thanks for any help, i really appreciate it.
Should be able to buy joying in UK they have a warehouse there try Amazon or eBay
Sent from my Nexus 7 using Tapatalk
Thanks, Ive done a search on Amazon and ebay for Joying e90 and get no results, ive also been on the carjoying u.k website and they dont even list the e90 as an available option
Buy from joying direct they will ship via dhl quick
Sent from my A0001 using Tapatalk
I have the xtrons e90 unit in my car. Seems similar to joying ect. One thing that took me ages to figure out as no instructions or guidance was given at all, was that there is two 12v yellow power leads and both need to be plugged in. One needs to go direct into the fusebox or to the battery.
Apparently BMW loses constant 12v power after a certain timer, roughly when the alarm system kicks in. So this means all power is lost to the head unit, including the small amount it needs to keep the MCU memory, which is your radio station presets and stuff. Also causing a much longer boot up. So I had to wire one of the cables into the central locking system fuse. Dead easy but you do need to buy a few bits from amazon for a few quid, otherwise the unit is a ballache.
Hope that helps
Cheers peeps, great advice. I've found auto pumpkin UK now so may order from them. The Xtrons , eonon and pumpkin all look identical so not sure if there is a difference as all seem to come from the same factory?
Should I be looking for the quad core 5.1 versions ?
Cheers all and thanks for the advise.
P.S I'll try and find the central locking fuse and use an add a circuit fuse to it.
Damit17 said:
Buy from joying direct they will ship via dhl quick
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks, I really want to avoid a big hit on import tax to the UK and have somewhere in the uk in case of return
But would joying not show it as a UK sale as they havea warehouse there
Sent from my Nexus 7 using Tapatalk
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Andrea69 said:
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Click to expand...
Click to collapse
Regards to radio presets read what I put above.
Dec64 said:
I have the xtrons e90 unit in my car. Seems similar to joying ect. One thing that took me ages to figure out as no instructions or guidance was given at all, was that there is two 12v yellow power leads and both need to be plugged in. One needs to go direct into the fusebox or to the battery.
Apparently BMW loses constant 12v power after a certain timer, roughly when the alarm system kicks in. So this means all power is lost to the head unit, including the small amount it needs to keep the MCU memory, which is your radio station presets and stuff. Also causing a much longer boot up. So I had to wire one of the cables into the central locking system fuse. Dead easy but you do need to buy a few bits from amazon for a few quid, otherwise the unit is a ballache.
Hope that helps
Click to expand...
Click to collapse
Dec64 said:
Regards to radio presets read what I put above.
Click to expand...
Click to collapse
Thanks a lot!
There are several empty positions in the fusebox. Do you suggest to wire the BATT+ wire directly or to install it with a 10A fuse?
Andrea69 said:
Thanks a lot!
There are several empty positions in the fusebox. Do you suggest to wire the BATT+ wire directly or to install it with a 10A fuse?
Click to expand...
Click to collapse
you could do either apparently.
Personally i just purchased these, https://www.amazon.co.uk/gp/product/B01E3PQWUE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and used one of them in the fuse for the central locking system, as it will always have 12v. Was really simple, tad fidly running the wire that's all.
Andrea69 said:
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Click to expand...
Click to collapse
I am having similar problems myself.
-BMW i-BUS it doesn't detect it at all. I need the CAN file for the unit, but no luck as of yet.
-Home button on the unit doesn't work anymore? Factory restore fix's but it stops again after 2 days!
-Most of the settings are locked from view. I access developer mode and it auto kicks me back to bluetooth phone menu.
- Front camera displays track and theres no option to remove it. So annoying!!
- LED colour APP has gone. This went after I did a MCU upgrade which I was given by seller.
- When I power up Clicker is always set to on. Front camera always resets to normal instead of saving mirroring. Other various settings are forgotten as are radio presets.
- Doesn't detect iPhone via USB only Bluetooth. But does charge... Slowly.
You had any luck with yours? I have a E90.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
maxxoutput said:
Hi Peeps
Really sorry if im in the wrong forum and im here to learn but hope someone can point me in teh correct direction
Im in the U.K and we dont seem to be able to buy Joying head units which seem to be popular in the states.
Im looking at Eonon or Xtrons mainly with the quad core processors and 5.1 Lollipop.
Is there anything i should be looking for or best avoided?
Thanks for any help, i really appreciate it.
Click to expand...
Click to collapse
How you getting on with this? I'm having problems with my e90.
Jay_brown47 said:
I am having similar problems myself.
-BMW i-BUS it doesn't detect it at all. I need the CAN file for the unit, but no luck as of yet.
-Home button on the unit doesn't work anymore? Factory restore fix's but it stops again after 2 days!
-Most of the settings are locked from view. I access developer mode and it auto kicks me back to bluetooth phone menu.
- Front camera displays track and theres no option to remove it. So annoying!!
- LED colour APP has gone. This went after I did a MCU upgrade which I was given by seller.
- When I power up Clicker is always set to on. Front camera always resets to normal instead of saving mirroring. Other various settings are forgotten as are radio presets.
- Doesn't detect iPhone via USB only Bluetooth. But does charge... Slowly.
You had any luck with yours? I have a E90.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
How you getting on with this? I'm having problems with my e90.
Click to expand...
Click to collapse
Hi. Try from AliExpress. Dhl or tnt etc 5 days is here. Yellow cable must ti be connected for the settings memory.

Categories

Resources