Recently i noticed that Bluetooth is not working right
When i connect to my freebuds it connect but the lef earbud would be higher ( turning Bluetooth off and on works)
But even when i connect it to my car the sound would shutter completely like its unplayable or something have to turn bluetooth on and off couple of times for it to work...
Read here: https://forum.xda-developers.com/huawei-p20-pro/accessories/freebuds-t3805872
It's not "just" bluetooth problem...
Related
i want to report an issue/bug that i've encountered yesterday when i purchased jabra bt620s bluetooth headset for listening music and making phone calls with my magic with ION rom.
when i connect the paired headset with the bluetooth enabled from before, the device only connects for a few seconds in MEDIA AUDIO mode, then remains only in phone audio mode, i have to disable and reenable the bluetooth on the magic to full connect the headset. annoying.
inf instead i enable the bluetooth on the device after that i've powered the headset on, the connection is full from the beginning....
result: i cannot let the bluetooth on in my magic.. because it's useless... i have to go then in preferences, wireless, bluetooth settings, ecc, ecc anyway =(
anyone with this problem?!?!
do you thik this is an ION ROM problem or bug?!?
try holding down the tap on the device in bt settings. then select to connect to media only. this works with my G1.
I have been troubleshooting this bt issue I have
At times my bt connection randomly disconnects.. only to reconnect if I cycle by on and off
At others it stays on .. but frequently cuts in and out.
I am connected to a jvc car stereo (which works fine connected to any of our other devices)
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I think the answer lies in the question here,, Parrot Bluetooth Media Connection.
The stereo isn't 'smart' enough to determine that what is connecting to it is a Phone/MP3 and as such you wont be able to split the audio to have the phone play music and the Stereo take calls, it'll end up being one over the other.
One way around this would be to test with a completely different Bluetooth Headset to see if this allows music to be played on the Device and Calls to come through on the Headset,, failing that its going to have to be a potential dev jobby to split how the device sends its audio and to what specific device,,, if that lies with HTC and Android/Us or Pioneer/Parrot themselves,, might be worth asking whats the official standpoint on this with the Manufacturer and see if they are getting this same issue from multiple folks
uConnect and Bluetooth Media
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I have the same problem with my HTC One across four different ROMs, two GE and two Sense.
It's NOT an issue with my car stereo (uConnect system) as it works flawlessly on my Nexus 7 and VZW Galaxy Nexus. I prefer to have media (music, Ingress etc...) play over the phone. Only thing I want to play over the uConnect is the actual phone. No matter how many times I unselect media in the bluetooth settings it selects it again.
I see this is an old thread, anyone have any ideas?
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
deadman3000 said:
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
Click to expand...
Click to collapse
I've just installed Bluetooth Auto Connect have to go run some errands in a little while, I'll let you know if it helps out managing profiles or not.
If it works let me know what settings you used as I don't understand all the options lol.
bluetooth problem
Hi developers: Thanks Team Venom for a great ROM. I have only one problem. Rom 2.7 no problem with Bluetooth in the car. 3.1 Installation of clean and dirty disables bluetooth. Ten seconds connected and then disconnected. Again, connects and disconnects. So it all over again. It is in version 3.6 ... any change BT software? You can install the software separately BT? Or any other advice? Thank you very much
edit: I deleted the original settings in the car. Again the connection and still the same problem.
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
michaean said:
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
Click to expand...
Click to collapse
As far as your wired headset issue, it does not happen on my r1 or my sisters r1. Your phone may just be defective in some way. I have called people successfully using a headset
Having same issues and found that by doing a reboot or restart I can correct them. But it comes back later. Irritating!
I see this too often as well. Restarting the speaker doesn't help - I have to reboot the phone to get it working again. It's very annoying as the built-in speaker is so bad that I always want to use the Bluetooth speaker when I'm home.
Bluetooth issues - phone "hijacks" Spotify control, turns off call-audio on BT devic
BT seems is super annoying. Not sure if it started on the last update (9.1.0.153) or it was happening before as well.
I'm experiencing two issues related to BT:
1. during a call through BT headphones (Bose QC35), the BT profile changes automatically: call-audio is being toggled off, and the headset is no longer being used for the call. Turning it on during the call works for a few minutes and then it toggles off again. Tried to un-pair the device and pair it again.
Might be important to note, I also had a laptop connected to the headphones at the same time, but I definitely didn't have that issue with my previous phone (Xiaomi mi5s) in the same conditions.
2. when using Spotify on a laptop. if the app is also running on the phone, it randomly hijacks the control.
I think it happens only when the phone is connected via BT to a media device, doesn't matter if the laptop is connected to the same one or not. It happens to me in two situations:
a. using BT headphones connected to both the laptop and the phone.
b. when the phone is connected to BT speaker and the laptop is connected by wire to a different set (to an amp via DAC).
in the above scenarios two different laptops are used.
It's really annoying,
Any idea how I can solve this?
Thanks
p.s. device version is VOG-L29, don't know if it matters.