Database Develop

Water resistant

Xperia V can take dip in the pool or in the sea to take pictures?

- IP57 certified - dust and water resistant
- Water proof up to 1 meter and 30 minutes

unicastbg said:
- IP57 certified - dust and water resistant
- Water proof up to 1 meter and 30 minutes
Click to expand...
Click to collapse
any type of water? will not affect my water screen with enough amount of chlorine or sea water?

jho07 said:
any type of water? will not affect my water screen with enough amount of chlorine or sea water?
Click to expand...
Click to collapse
You should avoid sea water and chlorine. Although I did a test in a pool, it's probably not a good idea. And the screen becomes sticky until cleaned out.
The warranty states that the phone can be exposed to clean water only. Anything else will void it.

I took it with me into the pool and sea a number of times. Water was splashing all over it, here and then I was taking shots from underwater. After finishing however I found some spots water remaining under the cover (outside the sealed area). After each water session it is necessary to immediately rinse the phone with clean water and dry it, in particular the unsealed area under the rear cover (of course not rinse the inside).
To my opinion this is the way all phones should be build. It is nice to know that dropping the device into a water will not kill it, or not needing to worry about transporting it in the outside pocket during my motorbike or bicycle rides. I am not convinced however regarding the long term sealing capabilities of the USB port. I feel there should be a factory charging dock included with the phone, or obtainable for a significantly more reasonable price.than the DK25.

How wet have you gotten your Gear?

Curious to hear some stories from those of you that have gotten your gear wet. I've done dishes (just splashes) and been in the rain with no problem.

Four days after getting it i accidently jumped in shower with it. I didnt notice untill it vibrated from a notifucation. And i was in there at least 10 minutes before that. No problems at all. To be noted i dont shower with it but it was good to know a full blast of water and shampoo didnt do anything to it.
Sent from my SAMSUNG-SM-N900A using xda app-developers app

dv8nathan said:
Four days after getting it i accidently jumped in shower with it. I didnt notice untill it vibrated from a notifucation. And i was in there at least 10 minutes before that. No problems at all. To be noted i dont shower with it but it was good to know a full blast of water and shampoo didnt do anything to it.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Sincerely, With respect I do NOT suggest you make that a habit and other posters try to replicate that. The IP is rated at a mere 55. I suggest you are a very lucky person, in fact very lucky indeed. From reading this forum it is clear from many posts that even moisture caused by sweat has caused some owners problems in misting up the camera lens. Several members who use the Gear in a Gym have actually made their own under strap to prevent moisture touching the back of the Gear.
No confrontation on my part I just want to point out that what you did was maybe more to do with luck than the design capabilities of this watch?
Caution.
Regards

A little rain going into my car thats it!

Absolutely. It was a singular event that actually freaked me out. I have no intentions of duplicating that mistake nor advise anyone to do that just because i was fortunate. I love my gear and am excited to partucipate in all the new developements happening here.
Sent from my SAMSUNG-SM-N900A using xda app-developers app

im a truck driver, im always out in the weather. i have put this watch through so much stress, i even banged it into a trailer!
theres still not a scratch on it and my watch is white, and its not even dirty(yet). very durable watch. i even wash my hands alot and gotten water
into the speaker on the strap. everything still works perfectly. :good:

Guess the better question is if anyone has had water damage and from what. I am very cautious with the watch and water. Wash my hands a lot slower now.. Lol. Basically treat it as it can't get wet. Don't know a lot of people who have the money to waste to test it's limits. I sure don't want to find out.
Sent from my SCH-I605 using Tapatalk

koreankabachy said:
Guess the better question is if anyone has had water damage and from what. I am very cautious with the watch and water. Wash my hands a lot slower now.. Lol. Basically treat it as it can't get wet. Don't know a lot of people who have the money to waste to test it's limits. I sure don't want to find out.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I will say 'Amen' to that.

Have sweated in mine a lot and no problems.Played golf in the rain no problems.certainly not been in the shower but I think that proves that worrying about water damage in a normal days use is a non starter
Sent from my SM-N9005 using xda app-developers app

hhadrian said:
Have sweated in mine a lot and no problems.Played golf in the rain no problems.certainly not been in the shower but I think that proves that worrying about water damage in a normal days use is a non starter
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
If you read this forum and other forums many people have not been as lucky as you. The Gear should certainly have been produced and designed with a higher IP rating. Sony has been doing this for some time. It is truly the Achilles tendon of the gear.
Regards

hhadrian said:
Have sweated in mine a lot and no problems.Played golf in the rain no problems.certainly not been in the shower but I think that proves that worrying about water damage in a normal days use is a non starter
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
I have read the comments and apart from some misting on the camera lens water is not a problem, if I get very hot and sweaty mine mists up but it clears very quickly much like my car windscreen and I would not like to lose the camera on the gear or my car windscreen
Sent from my SM-N9005 using xda app-developers app

Submerged in Saltwater Fish Tank
Was tending to my Saltwater fish tank with the right hand. To make a long story short...a fish got in the way. I reached in with my left hand to get him out of the way. I forgot I had the watch on my left wrist. I had the GG in my 75 Gallon Saltwater tank for about 10 seconds. The S Voice sounded a lil gurgled for a bit. However, now everything seems fine. This happened 3 days ago.

noface357 said:
Was tending to my Saltwater fish tank with the right hand. To make a long story short...a fish got in the way. I reached in with my left hand to get him out of the way. I forgot I had the watch on my left wrist. I had the GG in my 75 Gallon Saltwater tank for about 10 seconds. The S Voice sounded a lil gurgled for a bit. However, now everything seems fine. This happened 3 days ago.
Click to expand...
Click to collapse
For some actual visual of what the watch is rated for, this is the water part of an IP55 rating at 23 seconds:
http://www.youtube.com/watch?v=S-J1QnQIhiA
And here is an IP55 rated radio:
http://www.youtube.com/watch?v=UbDIB2yGuSY
Safe to say short of swimming with it, it should be fine.

How wet have you gotten your gear?
This sounds dirty... really wet! hahaha j/k sowwy.

Last night was the first time my watch got wet. I sweat heaps (and rather easily). Was at arcade and talked into a bit of impromptu dance dance revolution. Danced up a storm and sweated like a waterfall. No sign of moisture inside anywhere. If it continues that way, waterproofing is no longer a worry for me
Sucks that we have to worry about a watch like that...or is it just paranoia because of one guy and his 'it's only ip55 and therefore not workproof' stuff

Brendo said:
or is it just paranoia because of one guy and his 'it's only ip55 and therefore not workproof' stuff
Click to expand...
Click to collapse
I think it's mostly this. You can't swim with it on, but look at the evidence here;
* Someone showered with it and no problems
* Someone dunked it in a fishtank and no problems (Salt water at that)
* Look at those videos I posted - that is literally an IP55 rating test.
The water in the camera thing seems to be the lack of a seal around the edge of the glass. That's NOT the lens, it's just a lens protector. Water in here won't hurt anything at all.

Wore it in the rain to test her out. Even used it while raining (not well, but I was kinda able to swipe back and forth). She still works like a champ with absolutely no problems. Worst case scenario I'll just buy another if this one takes a dive and gut it for parts to tinker with.
Sent from my Note 3 & Galaxy Gear using Tapatalk

You know, ive seen comments on the moisture in the camera and ive never gotten it even after my accidental shower incident and frequent handwashings.
Sent from my SAMSUNG-SM-N900A using xda app-developers app

Check out this video on Youtube (add to the end of youtube.com) /watch?v=3o0MUGyU2Q4
(I don't have many posts, won't let me post URLs.

Wrathlon said:
I think it's mostly this. You can't swim with it on, but look at the evidence here;
* Someone showered with it and no problems
* Someone dunked it in a fishtank and no problems (Salt water at that)
* Look at those videos I posted - that is literally an IP55 rating test.
The water in the camera thing seems to be the lack of a seal around the edge of the glass. That's NOT the lens, it's just a lens protector. Water in here won't hurt anything at all.
Click to expand...
Click to collapse
Shall we talk facts rather than opinion. See below.
"The International Organization for Standardization issued a standard for water resistant watches which also prohibits the term waterproof to be used with watches, which many countries have adopted. The international standard ISO 2281 Horology – Water-resistant watches defines the water resistance of watches. This standard was introduced in 1990 and only designed for watches intended for ordinary daily use and are resistant to water during exercises such as swimming for a short period. They may be used under conditions where water pressure and temperature vary. However, whether they bear an additional indication of overpressure or not, they are not intended for submarine diving.
The ISO 2281 standard specifies a detailed testing procedure for each mark that defines not only pressures but also test duration, water temperature, and other parameters. Besides this ISO 2859-2 Sampling plans indexed by limiting quality (LQ) for isolated lot inspection and ISO 2859-3 Sampling procedures for inspection by attributes – Part 3: Skip-lot sampling procedures concerning procedures regarding lot sampling testing come into play, since not every single watch has to be tested for ISO 2281 approval.
ISO 2281 water resistance testing of a watch consists of:
Resistance when immersed in water at a depth of 10 cm. Immersion of the watch in 10 cm of water for 1 hour.
Resistance of operative parts. Immersion of the watch in 10 cm of water with a force of 5 N perpendicular to the crown and pusher buttons (if any) for 10 minutes.
Condensation test. The watch shall be placed on a heated plate at a temperature between 40 °C and 45 °C until the watch has reached the temperature of the heated plate (in practice, a heating time of 10 minutes to 20 minutes, depending on the type of watch, will be sufficient). A drop of water, at a temperature between 18 °C and 25 °C shall be placed on the glass of the watch. After about 1 minute, the glass shall be wiped with a dry rag. Any watch which has condensation on the interior surface of the glass shall be eliminated.
Resistance to different temperatures. Immersion of the watch in 10 cm of water at the following temperatures for 5 minutes each, 40 °C, 20 °C and 40 °C again, with the transition between temperatures not to exceed 1 minute. No evidence of water intrusion or condensation is allowed.
Resistance to water overpressure. Immersion of the watch in a suitable pressure vessel and subjecting it within 1 minute to the rated pressure for 10 minutes, or to 2 bar in case where no additional indication is given. Then the overpressure is reduced to the ambient pressure within 1 minute. No evidence of water intrusion or condensation is allowed.
Resistance to air overpressure. Exposing the watch to an overpressure of 2 bar. The watch shall show no air-flow exceeding 50 μg/min.
No magnetic or shock resistance properties are required.
No negative pressure test is required.
No strap attachment test is required.
No corrosion test is required.
Except the thermal shock resistance test all further ISO 2281 testing should be conducted at 18 °C to 25 °C temperature. Regarding pressure ISO 2281 defines: 1 bar = 105 Pa = 105 N/m2.
In practice, the survivability of the watch will depend not only on the water depth, but also on the age of the sealing material, past damage, temperature, and additional mechanical stresses."
Further t this please also note the following;
"Water resistance rating Suitability Remarks
Water Resistant 3 ATM or 30 m Suitable for everyday use. Splash/rain resistant. NOT suitable for showering, bathing, swimming, snorkelling, water related work and fishing. NOT suitable for diving.
Water Resistant 5 ATM or 50 m Suitable for swimming, white water rafting, non-snorkeling water related work, and fishing. NOT suitable for diving.
Water Resistant 10 ATM or 100 m Suitable for recreational surfing, swimming, snorkeling, sailing and water sports. NOT suitable for diving.
Water Resistant 20 ATM or 200 m Suitable for professional marine activity, serious surface water sports and skin diving. Suitable for skin diving.
Diver's 100 m Minimum ISO standard (ISO 6425) for scuba diving at depths NOT suitable for saturation diving. Diver's 100 m and 150 m watches are generally old(er) watches.
Diver's 200 m or 300 m Suitable for scuba diving at depths NOT suitable for saturation diving. Typical ratings for contemporary diver's watches.
Diver's 300+ m for mixed-gas diving Suitable for saturation diving (helium enriched environment). Watches designed for mixed-gas diving will have the DIVER’S WATCH L M FOR MIXED-GAS DIVING additional marking to point this out.
Manufacturers water resistance classifications are interpretations and are not part of any ISO standard definition."
As you can read for yourself this is not me on some sort of quest to prove any point whatsoever, I don't need to its written for you above.
My aim is to try to prevent people from damaging their watch. Nothing more and nothing less.
From the above quotes you can clearly see that our galaxy gear is not even water resistant by definition and needs care when coming into any contact with water.
Personally speaking, I find this a total pain in the neck and a very large blunder on Samsung's part. This is a wrist watch and should at least be water resistant too 30m or put this way splash proof. Yes, your other daily watch that has written on the back " Water resistant to 30m does NOT mean that the watch can be submerged to a depth of 30m, you cant even shower or bath in it!.
This is one of the biggest complaints with the watch trade and one that causes numerous problems to all watch retailers and horologists. The 'standard' is absurd. See the above codification for yourself.
The other point that needs to be understood is just because one may shower in the Gear, Sauna in the Gear etc and the watch still functions is certainly NOT an indication that no damage was done, the opposite may apply, its often just a question of time and how long the water inside the Gear will take to cause a possible problem.
Those unfortunate owners who have the lens mist up due to water ingress, How many times do you think one can place the watch in rice and dry it out before corrosion starts to make some affect? Sure the watch may work today, for a week maybe even six months but as yet we simply don't have the living experience of what's to come as the device is so new.
Only now are those who abused the Sony Xperia Z mobile phones starting to find their mobiles are not at all 'water proof' and cannot be taken white water rapids, diving, boiled in soup or cooked in chocolate (I jest not go see the youtube clips) etc. .

Underwater in salt water??

Hi,
The water proof feature is nice. However, I prefer sea water for snorkeling etc. So given corrosiveness of salt it's probably not a good idea.
Still from many reports people seem to have it surviving even salt water submersions when not too long and rinsing it immediately afterwards with fresh water.
But i don't want to dessctroy my nice Z3C obviously, so been looking for intermediate solution, like sealed zip bags or so, that would prevent it from too much wate rcontact, and if it leaks or whatever, it will still not die.
Any idea what could be used , if possible not too big to fit the Z3, and still let take some pics?

The phone is not rated for salt water, so I wouldn't want to try it. Salt water splashes from waves are probably fine.
I also wonder if Sony has a way of telling if salt water got in the phone should you have to send it in for warranty service. Plus, it's also gonna be much easier to inadvertently exceed the depth rating in the ocean. Definitely best to get a dry bag of some kind IMO.
Something like this: http://www.bhphotovideo.com/c/product/1035195-REG/loksak_lok_alok3_4x7_3_aloksak_bags_4_5x7.html
Or this: http://www.amazon.com/FRIEQ®-Universal-Waterproof-Carrying-iPhone/dp/B00AW2QT8I/ref=pd_cp_sg_0
There are a ton of waterproof phone cases/bags out there. Just be sure to pick one that promises super-clear plastic for photos.

Please use the questions and answer sections for questions you want answered
Thread moved

Sorry for wrong forum and thanks for moving it.
I finally ordered one of these: http://www.amazon.com/dp/B00AW2QT8I/ref=pe_385040_121528360_TE_dp_1
Will see how it works with the Z3C

Excuse me... Why should the Z3C not be waterproof in saltwater???
I really cannot see the problem? It is not that saltwater is more wet than "normal" water...
The saltwater will leave some salt when it is dry but you could easily remove this by putting the Z3C in water without salt for some minutes...

I don't believe the salt will do much good to the oliphobic coating of the screen or audio connector.

We are talking about 30 minutes of contact with salt...? To play it safe you use it in salt water for 20 minutes and then put it in normal water for 5 minutes and all the salt is gone...?
And by the way are both the power button and the audio connector made of aluminium...? And why would salt ruin the oliphobic coating of the screen...?
I could understand if pool water with chlorine could do something to the screen but since Sony advertise that you can use it in the pool then that shouldn't be a problem...

Salt is more corrosive unlike chlorine

cyphomatic said:
Salt is more corrosive unlike chlorine
Click to expand...
Click to collapse
In contact with iron, yes...Plastic, glass and aluminium, no - not for a 30 minute contact...

Foxhunter123 said:
In contact with iron, yes...Plastic, glass and aluminium, no - not for a 30 minute contact...
Click to expand...
Click to collapse
Indeed, I believe that the audio connector might be a weak spot. It sure isn't aluminum. I had other waterproof equipment before with an audioconnector that came into contact with seawater, wich turned out very bad. I won't take a chance.

I will try my Z3c within a week or so when I'm in the Canary Islands.
Have used my previous phone, Xperia ZR, in saltwater many times. No problem at all!

Dont do it. The water proof is only for freshwater.

You may want to read this page : http://support.sonymobile.com/global-en/xperiaz3compact/dm/water-and-dust-resistance/
Never immerse your device in salt water or let the micro USB port, headset jack or other uncovered parts come into contact with salt water. If you’re washing dishes by hand, avoid letting your device come into contact with the detergent or any other liquid chemicals.
Click to expand...
Click to collapse
If your Sony smartphone or tablet is waterproof to IPX8 standard*, then you can use it in a chlorinated swimming pool. However, avoid keeping the device in the pool for too long and remember to rinse it off thoroughly with fresh water once you get out.
Over time, chlorinated water can corrode the rubber seals, so prolonged use in chlorinated water is not recommended. But if you want to use your device to get underwater close-ups of a spectacular dive or your child’s first swimming lesson, go ahead.
Click to expand...
Click to collapse

Apart from the fact that Sony says don't immerse the phone in salt water, common sense suggests the copper contacts of the mag charger and headphone jack will not fair well (salt water will leave a nice oxide layer on both, which will impact the conductivity). A few minutes and very careful cleaning of the jack (not just a quick rinse) will probably be OK, but then we also have no idea how the glass coating, camera lens coating and various waterproofing membranes will fair in salt water. Knowing the corrosive nature of salt water and Sony's warning I certainly wouldn't risk dunking it in the ocean. YMMV

There was one story of a z2 that survived after being submerged for 6 weeks in salt water
http://www.phonearena.com/news/Sony...g-submerged-in-salt-water-for-6-weeks_id59223

I've used both my previous Z1 Compact and now my Z3 Compact in saltwater, not an issue at all.
Just pour some fresh water on it afterwards.

Blue grotto, long swim from gradola. no problem later

Use a condom, tie a knot waterproof

pakjebakmeel said:
Use a condom, tie a knot waterproof
Click to expand...
Click to collapse
For playing safe, you should use one of those waterproof bags for smartphones if you want to take your phone for dives in salt water so necesserily.

You would normally be right
Foxhunter123 said:
Excuse me... Why should the Z3C not be waterproof in saltwater???
I really cannot see the problem? It is not that saltwater is more wet than "normal" water...
The saltwater will leave some salt when it is dry but you could easily remove this by putting the Z3C in water without salt for some minutes...
Click to expand...
Click to collapse
However, the frame is aluminium, which doesn't play nice with salt water.

[Q] Is the original watch strap that comes with the watch waterproof?

I know the watch is waterproof, but is the leather band? I realize it's leather, but there is such a thing as waterproof leather. And why make a watch that's waterproof but give it a band that is not? If you know the answer, please point me in the direction of where you read that it was or was not. Thank you

my watch survived a kayaking experience (along with my s5) without any apparent harm.

Occasional waterdrops is no problem for the strap but it won't like a shower. For a waterproof strap you'll have to change to plastic type.

No, the watch ain't waterproof they way it souds when you say it. You can carefully walk in rain / wash your hands with watch on your wrist, but you can not put it under water (swimming or so) or keep it while going to shower. In fact you can, but it's most likely gonna suck water in.
Read more about IP rating here

It can be under water for short periods, with zero issues.
I've worn mine at a water park, going in and out of water for short periods, zero problems.
The watch is rated IP67. http://en.wikipedia.org/wiki/IP_Code
Solid particle protection:
6 Dust tight No ingress of dust; complete protection against contact (dust tight)
Click to expand...
Click to collapse
Liquid ingress protection:
7 Immersion up to 1 m Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). Test duration: 30 minutes
The lowest point of enclosures with a height less than 850 mm is located 1000 mm below the surface of the water, the highest point of enclosures with a height equal to or greater than 850 mm is located 150 mm below the surface of the water
Click to expand...
Click to collapse
I still would not recommend outright "swimming" with it. Since that may keep it under for longer than rated. I also would not try a shower, just because depending on the water jets, it's not 9k rated.

Doubt about get the phone under water

This is the first time since 5 months that I trythe ip68 certificate just putting the phone under water in the handwash to wash the entire phone.
How much time do I need to wait to disappear the notification of USB port wet? It seems that the phone is getting hot. Also I use handsoap for wash it. Hope that not be a big deal...
There is something that I can do to get normal again?

Just wait, I accidentally splashed mine, the moisture notification disappeared after some 4 hours, it depends on ambient conditions, where I live it is 100% humid 24 hours, as I live 200 meters away from the beach..

winol said:
Just wait, I accidentally splashed mine, the moisture notification disappeared after some 4 hours, it depends on ambient conditions, where I live it is 100% humid 24 hours, as I live 200 meters away from the beach..
Click to expand...
Click to collapse
The notification has gone but the phone is getting warm and it feels dampy.
I knoknows that depends of aambient conditions but I feel it different...
Thanks for your comment
Regards

Conito11 said:
This is the first time since 5 months that I trythe ip68 certificate just putting the phone under water in the handwash to wash the entire phone.
How much time do I need to wait to disappear the notification of USB port wet? It seems that the phone is getting hot. Also I use handsoap for wash it. Hope that not be a big deal...
There is something that I can do to get normal again?
Click to expand...
Click to collapse
I would try putting your phone in a bag of rice overnight to draw any water out that may have been forced in from the pressure of the running water. Never use soap on your phone or place it under running water. The soap lubricates the water and allows it to be more easily forced where it wasn't intended to go. I just use a microfiber cloth with lens cleaning solution sprayed on the cloth. Even doing this causes the moisture detected warning for a few.

Buy some anti-bacterial wipes to clean your phone with. There is absolutely no need to wash it with soap and water.

Conito11 said:
This is the first time since 5 months that I trythe ip68 certificate just putting the phone under water in the handwash to wash the entire phone.
How much time do I need to wait to disappear the notification of USB port wet? It seems that the phone is getting hot. Also I use handsoap for wash it. Hope that not be a big deal...
There is something that I can do to get normal again?
Click to expand...
Click to collapse
Why on earth royals tu nerd soap to clean a phone? The i68 rating is about water resistance of under water. At 1 mtr for 30 minutes.. My figures may be wrong as they change from ip67 to ip68 but the point here is that you're not supposed yo it it under a tap!
He depth and time of water resistance is defined in these certifications because it is about pressure and time.. Eg The phone can hold up to the pressure at 1 mtr of hat ever depth has been mentioned in the rating for a maximum of the time given in the rating.
If it is 5 mtr 15 minutes, then it will not be damaged by water if it's 5 mrt see for 15 minutes max.. As time increases the pressure on the seals can and probably will get water into The phone.
Remember it is water resistant not waterproof! With a tap The after comes out with pressure and that could cause one of the seals to fail.
Also, soapy water is better at conducting electricity, it could have shorted out the phone and you would have a spotless but dead note 8.
Water resistant does not mean water proof and it certainly does not mean dunking the phone in water all the time. It is a safety measure which helps if you accidentally get it wet or drop it in a puddle.
The guys testing phones on YouTube are different as they try to push the limits but do not recommend it for others to follow or repeat Their tests
This us long but I see a lot of people are unaware and say their phone is waterproof.. I recently met a guy at a cellphone shop that is run by my friend.. The guy had an IPhone 7 or 7s or 7s+ if there's one.
He got it wet accidentally, spilled water on it and it died.. I asked him whether he went to apple he said he did and they want Rs. 35000 which is $500 to replace it.
I told him that it is supposed to be ip67 or ip68 so they should cover it under warranty.. But they never offered him this solution..
Don't you think it is wrong that they claim water resistance and it dies because of a splash and they do not cover it?
Hope this helps..

centaur31 said:
Why on earth royals tu nerd soap to clean a phone? The i68 rating is about water resistance of under water. At 1 mtr for 30 minutes.. My figures may be wrong as they change from ip67 to ip68 but the point here is that you're not supposed yo it it under a tap!
He depth and time of water resistance is defined in these certifications because it is about pressure and time.. Eg The phone can hold up to the pressure at 1 mtr of hat ever depth has been mentioned in the rating for a maximum of the time given in the rating.
If it is 5 mtr 15 minutes, then it will not be damaged by water if it's 5 mrt see for 15 minutes max.. As time increases the pressure on the seals can and probably will get water into The phone.
Remember it is water resistant not waterproof! With a tap The after comes out with pressure and that could cause one of the seals to fail.
Also, soapy water is better at conducting electricity, it could have shorted out the phone and you would have a spotless but dead note 8.
Water resistant does not mean water proof and it certainly does not mean dunking the phone in water all the time. It is a safety measure which helps if you accidentally get it wet or drop it in a puddle.
The guys testing phones on YouTube are different as they try to push the limits but do not recommend it for others to follow or repeat Their tests
This us long but I see a lot of people are unaware and say their phone is waterproof.. I recently met a guy at a cellphone shop that is run by my friend.. The guy had an IPhone 7 or 7s or 7s+ if there's one.
He got it wet accidentally, spilled water on it and it died.. I asked him whether he went to apple he said he did and they want Rs. 35000 which is $500 to replace it.
I told him that it is supposed to be ip67 or ip68 so they should cover it under warranty.. But they never offered him this solution..
Don't you think it is wrong that they claim water resistance and it dies because of a splash and they do not cover it?
Hope this helps..
Click to expand...
Click to collapse
Nice opinion and as you Said: waterproof is not the same like water resistant.

As I have seen reading several posts regarding this issue about claiming warranty due to water damage, it is very difficult if not impossible to get a device fixed by means of warranty under this circumstances, because the damage might be caused by exceeding the max allowed depth, or the time it was submerged and, if the device was put into a strong flow of water, as they can not verify anything about these possible scenarios, they refuse to make valid the warranty