Hey everyone I'm back with another dialer code tidbit for the Samsung Galaxy J3 Luna Pro model SM-S327VL Straight talk (Verizon variant) Android 6.0.1. I tried multiple dialer codes and I'm sure I may have missed one but I'm sure someone will post other working codes. I have a good majority of them her so please reply to this post if you find more that have been tested and are working. Some codes open a service menu but do nothing.I consider them as Does Not Function Properly or D.N.F.P.
Root is not necessary for these dialer codes to function!
Open your phone app and go to your dial pad and enter the codes exactly as posted. If your using a SM-S327VL the J3 Luna Pro for straight talk then they should give the same results as I got.
Dial...
*#0*# hardware module test
*#0011# D. N. F. P.
*#0283# Loopback settings
*#0808# USB settings
*#1106# Grip Sensor
*#1111# D. N. F. P.
*#1234# Software Version
*#12580*369# Main Version (AP, CP, CSC, RF Cal, HW Rev)
*#2222# D. N. F. P.
*#22558378# CABC test
*#22558463# reset call times
*#2663# Firmware Version
*#2683662# D. N. F. P.
*#34971539# Camera Firmware Standard Menu
*#35789# Device Keystring (displays START, PASS , FAIL)
*#66336# CP Debugging Level
*#7277# receiver call mode
*#7353# Hardware test
*#77467# Global IMS settings
*#87976633# dialer accepts the code but does not respond.
*#9090# D. N. F. P.
Well that's all I have cataloged all that I have found functioning/semi-functioning. Remember if you try these codes on a similar or different device model than the one I have listed (prior to writing the dialer codes) they may not function properly or work at all. Please let me know if you have any of the D. N. F. P. dialer codes do anything for you. All I see with them are a white service menu with 2 lines of data. Also if anyone has any dialer codes that I have left out or haven't listed here then please feel free to put them here. I hope this guide was useful to you. Thanks for viewing,
sosthenisRR
If you use es file explorer or another app that allows you to view the manifest each apk will have it's dialer codes listed. Not all will work. Remember that Verizon disables hidden menu so VL version will need to enable hiddenenu, likely why some of the codes open but go no further
Related
Hi
I have problem with Topaz. When I save in contact - mobile No with country code (egz. +44) and try to call from other phone my Topaz don’t recognize number and is showing as a number not contact which was saved.
If I save in contact mobile No as 0xxxxxxxx without country code everything works ok it will show. What is wrong? Is there any setup or patch or anything what I can do with that? I’m travelling quite often so I store numbers with country code.
(Sorry for English)
I do not have this problem, but afaik there is an option on how many digits the number is recognized.
Set your caller ID to identify according to greater or lesser number of digits.
Otherwise, it may be that you have duplicate entries. This would also affect Caller ID.
where is the setting to change the number of digits - I appear to only have options for all contacts, no or address book ...........but no digit mask
I'm having the same issue.....
I've tried to manually add a number. With/without all/some prefixes.
Using + and 00.
I've checked to duplicates.
I've emptied by phonebook and SIM.
I got someone to call me. Saved their number from the call.
I've tried, say, +353868033333 and +3530868033333 and 0868033333 and 868033333 and replaced the + with a Zero.
I've set my Caller ID from 12 down to 2 and still nothing.
I do note something interesting.
I had ONE phone number work so far.
And I've yet to discover why.
I've placed a call with HTC and they are aware of the issue for only a week so far it seems but I think this has been an issue even from previous models.
Anyone got any others ideas? I'm going to try the hard reset and allowing it to import one number from the SIM card. And then I'll sync my full phonebook and see. But I'm holding off a few days to see if HTC will wake up and smell the coffee.
starfish_001!!!
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff
geofflyons said:
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff
Click to expand...
Click to collapse
Excellent - I will give this a go
Ummm... there might be some trouble...
Let me try to help...
Normal number should consist of:
+ (international prefix)
xxx (country code)
xxx (area code/provider prefix)
xxx xxxx (phone number)
So let's use some reverse engineering:
- are ALL phone numbers in your country lenght 7 digits?
- is area code always 3 digits?
- how long is your country code?
For example, post #5:
"+353868033333 and +3530868033333 and 0868033333 and 868033333"
phone number: 8033333
area code: 086
country code: 353
Catch 22: you HAVE TO ommit 0 from area code, so it becomes 86 and correct form becomes first one, +353 86 8033333.
So recognition lenght should be: 7 + 2 + 3 = 12. Right? Not always.
Normally, math goes like this: (shortest possible phone number lenght in your country) + (shortest possible area code lenght without zero) + (country code)
In my country, it looks like this: 6 + 1 + 3 = 10
Example: +385 1 999999
But, there could be: +385 51 999999
and: +385 91 999999
If you go from lenght 2 up, you notice that till lenght 8 those 3 numbers are same for caller ID!
Now, try to play that with you country's number format... not to mention USA, where country code is 1!
Sorry if all of this was already obvious...
Bodisson,
Thanks for that expansion of the issue.
I'm going to give it another go.
Unfortunately the phone numbers here in Ireland can be in a range of:
+363 86 8033333 to +353 1 55555 so perhaps the Irish will be stuck with a HTC phone that will only recognise a handful of phone numbers.
I tried the CallerID with 12 and lower already. I might have to go right back to the basics on this one and start with one phone number.
I've read in other threads that people had to do a hard reset, have some numbers on their sim and then allow the wizard to copy those numbers across. You can then add the full set of numbers.
Thanks for your calculations. I'll give it one more shot before I do a hard reset. If only HTC would roll out WM6.5 so I can try that first. I'm a little put off by the manual upgrades.
Regards,
Geoff
I am having this problem after installing a Translation software in my device, where it automatically installed other languages.... i tried un installing it, but the problem persist, i have to hard rest i think !!
Hello mates I have collected few secret codes for our HD7,I am going to share with u
so far I have collected few secret codes on this HD 7 like Field Test and some other unknown secret codes. But the Only Confirmed Secret Code is the Field Test Secret Code.
Field Test Code: ##3282#
Other Secret Codes for HTC HD 7 (Try them at your own risk)
*#61# And *#62# and *#67# are all related to call forwarding, if u replace *# with ## u will receive a succeeded message. *#76# and *#77# disables service. Not sure what service. *#21# disables all forwarding capabilities. *#30# service enabled. *#31# and *#33# *#35# service disabled. *#43# service enabled for voice *#331# and *#332# and *#351#service disabled
I am not responspible for any damage to ur device.
Enjoy
Anyone tried ?
yes i'm tryed but i don't understand anyting
thanx anyway...
sachin kundu said:
Hello mates I have collected few secret codes for our HD7,I am going to share with u
so far I have collected few secret codes on this HD 7 like Field Test and some other unknown secret codes. But the Only Confirmed Secret Code is the Field Test Secret Code.
Field Test Code: ##3282#
Other Secret Codes for HTC HD 7 (Try them at your own risk)
*#61# And *#62# and *#67# are all related to call forwarding, if u replace *# with ## u will receive a succeeded message. *#76# and *#77# disables service. Not sure what service. *#21# disables all forwarding capabilities. *#30# service enabled. *#31# and *#33# *#35# service disabled. *#43# service enabled for voice *#331# and *#332# and *#351#service disabled
I am not responspible for any damage to ur device.
Enjoy
Click to expand...
Click to collapse
These are not secret codes for HD7, but only the standard GSM commands/codes always used on any GSM/UMTS terminal.
Look at this links for infos:
GSM Features That Aren't Widely Known
GSM codes to note
GSM Feature Codes
secret codes for HD7
##3282# – Field Test Code
*#06# = Show IMEI
Good day people
I know the one code for the service menu but am sure there is another code besides the *#*#7378423#*#* one!
Does anyone know the code or have a list of all the cods for the device?
Thanks
*#*#4636#*#* – Phone Information (allows you to change the SMS service centre number and more)
*2767*3855# – Factory Reset Phone
*#*#34971539#*#* – Shows completes information about the camera
*#*#7594#*#* – Changing the power button behavior – Enables direct power off
once the code enabled
*#*#273283*255*663282*#*#* – For a quick backup to all your media files
*#*#197328640#*#* – Enabling test mode for service activity
*#*#232339#*#* or *#*#526#*#* or *#*#528#*#* – Wireless LAN Tests
*#*#232338#*#* – Displays Wi-Fi Mac-address
*#*#1472365#*#* – For a quick GPS test
*#*#1575#*#* – A Different type GPS test
*#*#0283#*#* – Packet Loopback test
*#*#0*#*#* – LCD display test
*#*#0673#*#* or *#*#0289#*#* – Audio test
*#*#0842#*#* – Vibration and Backlight test
*#*#2663#*#* – Displays touch-screen version
*#*#2664#*#* – Touch-Screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – Ram version
*#*#232331#*#* – Bluetooth test
*#*#7262626#*#* – Field test
*#*#232337#*#* – Displays bluetooth device address
*#*#8255#*#* – For Google Talk service monitoring
*#*#4986*2650468#*#* – PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* – PDA and Phone firmware info
*#*#1111#*#* – FTA Software version
*#*#2222#*#* – FTA Hardware verion
*#*#44336#*#* – Displays Build time and change list number
*#06# – Displays IMEI number
*#*#8351#*#* – Enables voice dialing logging mode
*#*#8350#*#* – Disables voice dialing logging mode
**05***# – Execute from Emergency dial screen to unlock PUK code
Source
Not all of them might be compatible with Xperia devices, they are all generic Android codes.
the last PUK code one
hey there hat **05***# doesn't work for me, when i enter all of that like **05*80063169*0000*0000#, this is what i typed in the emergency dialler and then it says.. "connection problem or invalid mmi code"
Well while entering puk code i don't get any tower (or should i? i don't know)
and swapping phones doesn't works as the sim is not detected by any other phone other than mine, please tell me how to overcome this problem
Hi every body. First none of those code work with my z except *#*#7378423#*#* and second when I make a call with my phone the lcd won't get dark. Please help me what to do. Thanks.
Please add *#*#4636#*#* to the list. Is a different test and information menu. Also there you can change the sms center number (this was my issue, since i am on a vodafone locked phone and changed the type of contract and had to change the sms center number also, but the number was grayed out in the phone`s settings).
DrKrFfXx said:
*#*#4636#*#* – Phone Information (allows you to change the SMS service centre number and more)
Not all of them might be compatible with Xperia devices, they are all generic Android codes.
Click to expand...
Click to collapse
Yet another useless "Samsung == Android" post.
4636 is pretty much the only generic Android code in there. Nearly all the rest are Samsung specific codes (except 06 which is a GSM code)
Hi everyone,
Wondering if someone could give me advice on using assisted dialing. I'm using Sprint HTC One abroad (in Ukraine) and I always used assisted dial on my CDMA phones. But recently I upgraded to HTC One and found that none of Sprint ROMs includes assisted dial feature. Actually similar feature is included as "north american dialing key" but it does not work the same way (it always assumes that home country is USA/CA). I looked inside Phone.apk (decompiled it to get smali files and readable xmls) and found that it still includes NBPCDUtility and AssistedDialingSettingV2 action but when I tried to launch them from shell (adb shell, am com.android.phone....) I receive a message that the Phone app has crashed. I also found that none of Sprint ROMs include HtcCdmaMccProvider.apk (contains db with country codes, IDD,NDD,etc), but Verizon ROMs still include this features (and HtcCdmaMccProvider). Then I tried to use Verizon apks but of course they didn't work (launching phone.apk writes to log "Failed to find provider info for com.htc.omadm" and then crashes).
So, I'm wondering if somebody (may be ROM makers ) knows if there is a way to override mCurrentCountry (com/android/phone/nbpcd/NBPCDUtility) (like it works in many Verizon phones) without recompiling phone.apk?
Dreaded VM phone lost meid.
Service will not allow reactivation
I have serial and hex is there an app
To help edit or reenter the settings.
I noticed. In europe they have web pages about this. But for their countries system towers .
I realize swapping phones is not allowed but reinstalling your actual
# meid should fairly simple most likely a program converts your serial
Access code to generate all settings
On that unique phone hex generator.
Any thoughts are appreciated I noticed in CYn11 your settings were
Visible.
Thanks Doug