Database Develop

[KERNEL][G93xx][TW6/7/8][2019-12-30] ** TGPKERNEL ** [v6.15.5][3.18.140][ESD2]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TELEGRAM CHAT ROOM​
THIS KERNEL IS NOW END-OF-LIFE. NO MORE PLANNED UPDATES WILL BE DONE​
List of Supported ROMS
MM RELEASE
S7 Stock MM ROMs - G930F / G930FD / G930W8 / G935F / G935FD / G935W8
S7 Hybrid MM ROMs (G930F/G935F) - The Galaxy Project (TGP), SuperMan-ROM, Nougat Ambasadii etc.
N RELEASE
THE N RELEASE INCLUDES ALL VERSIONS. S7 / S8 PORT / N8 PORT
S7 Stock N ROMs - G930F / G930FD / G930W8 / G935F / G935FD / G935W8
S7 Hybrid N ROMs (G930F/G935F) - The Galaxy Project (TGP), Superman ROM, Ambasadii S7 etc.
S8 Ported ROMs - Ambasadii S8 Port, Renovate S8, KHONGLOI, Batman ROM, sac23, etc.
Note 8 Ported ROMs
O RELEASE
S7 Stock O ROMs - G930F / G930FD / G930W8 / G935F / G935FD / G935W8
S7 Hybrid MM ROMs (G930F/G935F) - The Galaxy Project (TGP), Ambasadii S7, SilverRom, etc
S9 Port ROMs
N8 Oreo Port ROMs
Tthe kernels use an AROMA installer to help guide you through the installation, plus add Magisk or SuperSU to your device.
For MM kernels it will give you the option to install Spectrum, plus the controller app for Spectrum and MTweaks.
If you wish to toggle on/off the AMOLED PWM Flicker-Free fix you can use MTweaks. You can find the option in the Misc Settings.
You don't nessecarily have to enable the option in the AROMA installer either because it's now built in to the main kernel.
The Lite version may have issues and automatically enable this fix, so diable it use Mtweaks and go to the Misc settings, disable the
PWMFix option and enable the Apply on Boot option at the top of that screen. Reboot and it should be ok now.
SPECTRUM INFO: XDA Thread
AMOLED PWM FLICKER-FREE INFO: XDA Thread
WIREGUARD INFO: XDA THREAD
VARIANTS SUPPORTED
G930F
G930FD
G930K
G930L
G930S
G930W8
G935F
G935FD
G935K
G935L
G935S
G935W8
KERNEL INFORMATION
Built with: Google GCC 4.9 Toolchain
Kernel Base: G935FDXXU1BPLB (Marshmallow Release)
Ramdisk Base: G935FDXXU1BPLB (Marshmallow Release)
Kernel Base: G935FDXXU2DRAG (Nougat Release)
Ramdisk Base: G935FXXU2DRD1 (Nougat Release)
Kernel Base: G935FXXU5ESD2 (Oreo Release)
Ramdisk Base: G935FXXS7ESL5 (Oreo Release)
AROMA INSTALLER OPTIONS
Install Magisk
Install Spectrum (This also installs the Spectrum Control App)
Install WireGuard Control App
Set SELinux to Permissive or Enforcing
Enable Insecure ADB
Enable PWM Flicker-Free fix by default
ADVANCED OPTIONS: Set CPU Govrenor, IO Scheduler, TCP Congestion Algorithm, Max+Low CPU/GPU Frequencies
FEATURES
AMOLED PWM Flicker-Free fix (selectable via MTweaks)
WireGuard Support
Switch between SELinux Permissive or Enforcing (selectable via MTweaks)
Odexed / Deodexed ROM Support
Activated joystick_xpad Support
Added Boeffla Wavelock Blocker
Added Extra Configurable Wavelocks
Added CPU Governors
Added CPU Voltage and Frequency Control
Added Dynamic Fsync
Added Fake Knox 0x0 (@lyapota)
Added Frandom Support
Added GPU Voltage and Frequency Control
Added HID Gadget Keyboard / Mouse Patch
Added IO Schedulers
Added Insecure ADB
Added Powersuspend
Added UKSM
Adjusted Low Frequencies on CPU to 208MHz / 130MHz
Adjusted Max CPU Frequencies 27040MHz
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled RPMB
Disabled Secure Storage
Enabled 4 Cores can reach highest CPU frequency
Enabled CIFS Filesystem Support
Enabled IP_NF_TARGET_TTL
Enabled ISO9660 Filesystem Support
Enabled JOLIET Filesystem Support
Enabled Lockup Detector
Enabled LZ4 support
Enabled NFS Filesystem Support
Enabled NTFS Support
Enabled Software CRC Control (via MTweaks)
Enabled UDF Filesystem Support
Enabled ZISOFS Filesystem Support
Increase Battery Charging Levels (USB Standard = 900, USB Accesory charger = 900, MHL USB =660)
Spectrum Support
Moro Sound v2
list of included CPU Governors
alucard - barry_allen - bioshock - blu_active - cafactive - conservative - cultivation - dancedance - darkness - electrodemand - elementalx - HYPER -
impulse - intelliactive - intellidemand - intellimm - interactive - ironactive - lionheart - nightmare - ondemand - ondemandplus - ondemand_x -
pegasusq - performance - powersave - relaxed - smartass2 - smartmax - smartmax_eps - userspace - wheatley - yankactive - zzmoove
list of included IO Schedulers
bfq -fifo - fiops - maple - row - sio - sioplus - tripndroid - vr - zen
DOWNLOADS
DOWNLOAD VIA ANDROIDFILEHOST for Oreo versions - MIRROR
DOWNLOAD VIA ANDROIDFILEHOST for Nougat versions [End Of Life]
DOWNLOAD VIA ANDROIDFILEHOST for Marshmallow versions [End Of Life]
CREDITS + THANKS
Samsung Open Source Release Center for the Samsung Source code
Google for AOSP Common Kernel Source
@Tkkg1994 for all his help and being my mentor
@osm0sis for Android Image Kitchen and AnyKernel2
@jesec for Fingerprint Fix
@arter97 for various fixes
@lyapota] for some Governors and Schedulers, and Fake KNOX 0x0 patch
@farovitus for his help with mods and commits
@morogoku for MTweaks, lots of help, and commits
@Noxxxious for his help with mods and commits
Other devs that I have taken commits from which are credited in Github
Last but not least, my excellent group of testers on Telegram who currently help by testing new betas
XDA:DevDB Information
TGPKernel , Kernel for the Samsung Galaxy S7 Edge
Contributors
djb77
Source Code: https://github.com/TheGalaxyProject
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 6.15.5
Stable Release Date: 2019-12-30
Created 2016-11-16
Last Updated 2019-12-31

CHANGELOG​
OREO CHANGELOG
v6.15.5 - 2019-12-30
Updated Ramdisk to ESL5
v6.15.4 - 2019-12-09
Merged ASB-2019-12-05_3.18 into Kenrel
Updated Ramdisk to ESK5
Updated MTweaks and Wireguard Apps
v6.15.3 - 2019-11-08
Merged ASB-2019-11-05_3.18 into Kenrel
Updated Ramdisk to ESJA
Updated Magisk to 20.1
v6.15.2 - 2019-09-05
Updated android 3.18 upstream
Updated Ramdisk to ESGD
Updated Mtweaks to 2.15.1
v6.15.1 - 2019-06-27
Updated Ramdisk to ESF8
Updated MoroSound to 2.1.1
Updated android 3.18 upstream
v6.15.0 - 2019-06-17
Updated WireGuard App
v6.14.1 - 2019-06-07
Updated Magisk to 19.3
Updated F2FS to 5.2-rc1
Fixed potential WireGuard issues
v6.14.0 - 2019-05-23
Updated Samsung Kernel Source to ESD2
Updated Magisk to 19.2
v6.13.2 - 2019-05-16
Updated Linux to 3.18.140
v6.13.1 - 2019-05-16
Updated Ramdisk to XXU5ESD2
v6.13.0 - 2019-05-15
Changed to AOSP Common Kernel Source
v6.12.10 - 2019-05-05
Updated Magisk to 19.1
v6.12.9 - 2019-04-27
Updated Linux to 3.18.139
Updated MTweaks to 2.14.0
Hopefully fixed Bluwtooth Keyboard Issue
v6.12.8 - 2019-04-05
Updated Linux to 3.18.138
Updated Magisk to 19.0
Updated Moro Sound Control to v2.1
v6.12.7 - 2019-03-24
Updated Linux to 3.18.137
Updated F2FS to 5.1-rc1-3.18
Updated Ramdisk to ESC3
Updated MTweaks to 2.13.5
Updated Wireguard App to 20190319
Added Moro Sound Control v2
v6.12.6 - 2019-03-03
Patches Ramdisk with Security Patch date from installed ROM
Updated Ramdisk to ESBA
Updated MTweaks to 2.13.0
Added Moro Sound Control
v6.12.5 - 2019-02-23
Updated Linux to 3.18.136
v6.12.4 - 2019-02-22
Updated Linux to 3.18.135
v6.12.3 - 2019-02-08
Updated Linux to 3.18.134
Updated Magisk to 18.1 STABLE
Updated Ramdisk to ESA3
v6.12.2 - 2019-01-26
Updated Linux to 3.18.133
Updated F2FS
Updated Magisk to 18.1-b7f69238 (18007) CANARY
v6.12.1 - 2019-01-14
Updated Linux to 3.18.132
Updated Magisk to 18.1-1df65940 (18005) CANARY
v6.12.0 - 2018-12-28
Updated Samsung Kernel to ERL2
v6.11.6 - 2018-12-23
Updated Linux to 3.18.131
Updated Ramdisk to ERL3
Updated Magisk Manager to 6.1.0 (165)
Updated WireGuard
v6.11.5 - 2018-12-18
Updated Linux to 3.18.130
Updated WireGuard
v6.11.4 - 2018-12-14
Updated Linux to 3.18.129
Downgraded Magisk back to 17.3
v6.11.3 - 2018-12-09
Removed SuperSU
Updated Ramdisk to ERKE
Updated Magisk to 18.0
Updated WireGuard
v6.11.2 - 2018-12-01
Updated Linux to 3.18.128
Updated MTweaks to 2.12.1
v6.11.1 - 2018-11-28
Updated Linux to 3.18.127
v6.11.0 - 2018-11-23
Updated Samsung Kernel Source to ERJE
Updated MTweaks to 2.11.0
v6.10.6 - 2018-11-22
Updated Linux to 3.18.126
v6.10.5 - 2018-11-21
Updated Ramdisk to ERJE
v6.10.4 - 2018-11-11
Updated Linux to 3.18.125
Updated AIK to 3.4
Updated Ramdisk to ERJA
Updated MTweaks to 2.10.0
v6.10.3 - 2018-10-24
Updated Ramdisk to ERJ2
Updated Magisk to 17.3 (17302)
Updated Magisk Uninstaller to 20181022
Updated BusyBox to 1.29.3
Updated Anykernel
v6.10.2 - 2018-10-20
Updated Google Toolchain
Updated Linux to 3.18.124
Fixed Ramdisk mods
v6.10.1 - 2018-10-10
Updated F2FS
Updated Wireguard Control App
v6.10.0 - 2018-10-01
Updated Samsung Kernel to ERI1
Updated Ramdisk to ERI4
v6.9.2 - 2018-09-27
Updated Magisk to 17.2
Updated Linux to 3.18.123
v6.9.1 - 2018-09-20
Updated Ramdisk to XXS3ERI1
Fixed Ramdisk / Deodex issues
v6.9.0 - 2018-09-17
Updated Samsung Kernel Source to ERH6
v6.8.3 - 2018-09-11
Updated Google 4.9 Toolchain
Updated Linux to 3.18.122
v6.8.2 - 2018-09-07
More config fixes
v6.8.1 - 2018-09-06
Updated AROMA THeme
Updated Magisk to 17.1
Updated Linux to 3.18.121
Fixed fips issue with compiling
Fixed some config issues
v6.8.0 - 2018-08-28
Updated Samsung Kernel Source to ERH1
Updated Ramdisk to ERH1
Updated Linux to 3.18.120
Updated Magisk Manager to 5.8.3 (135)
v6.7.2 - 2018-08-18
Updated Linux to 3.18.119
v6.7.1 - 2018-08-11
Rebuilt kernel again, this time including F2FS
Fixed some VoLTE issues
v6.7.0 - 2018-08-10
Rebuilt kernel using my own base again
Updated Linux to 3.18.118
v6.6.3 - 2018-08-07
Reverted back to Google 4.9 Toolchain
Added a patch to fix PWM issues
Tweaks on zswap
Fixed config for Wireguard
v6.6.2 - 2018-08-07 (Forgot to include new changes)
v6.6.1 - 2018-08-03
Updated ELS Base
Fixed some kernel compile warnings
Updated AIK and AnyKernel2
Updated WireGuard
Updated BusyBox
v6.6.0 - 2018-07-28
Updated Samsung Kernel Source to ERG2
Updated Linux to 3.18.117
v6.5.4 - 2018-07-27
Reverted Magisk back to 16.7
Cleaned up source code
v6.5.3 - 2018-07-24
Reverted Magisk back to 16.3, newer versions having some issues with Deodexed ROMs
Reverted back to my custom toolchain
Built dtb kernel files more complete
Fixed typos in installer
v6.5.2 - 2018-07-23
Cleaned up Kernel source
v6.5.1 - 2018-07-22
Kernel build script adjustments
AROMA installer adjustments
Updated Linux to 3.18.116
Updated Ramdisk to ERG2
Updated Magisk to 16.7 (1671)
Updated Wireguard
v6.5.0 - 2018-07-18
Rebuilt from scratch using exynos-linux-stable/herolte base
v6.4.1 - 2018-07-16
Support for /odm partitions (for S9 Ports)
Odexed/Deodexed ROM support, installer will detect
Added custom wakelocks (from Noxxxious Kernel)
v6.4.0 - 2018-07-13
Updated Samsung kernel source to ERF4
Updated Linux to 3.18.115
Ramdisk Fixes
Installer Fixes
Updated Wureguard
v6.3.1 - 2018-07-08
Updated Linux to 3.18.114
Updated Magisk to 16.6
Fixed UKSM issues
Updated Wireguard
Added N8 Oreo Port Support
v6.3.0 - 2018-07-02
Updated Samsung Kernel Source to EREM
Updated Ramdisk to ERF4
Updated MTweaks to 2.9.1
Updated LED Control
Updated Wireguard
v6.2.1 - 2018-06-24
Changed to Google GCC 4.9 Toolchain
Hopefully fixed FIngerprint issues
Updated Ramdisk to EREM
v6.2.0 - 2018-06-23
Installer Fixes
Kernel Fixes (thanks to @farovitus)
Removed F2FS (no longer works with Oreo)
Updated Magisk to 16.4
Updated Wireguard
v6.1.4 - 2018-06-14
Updated Linux to 3.18.113
Updated Wireguard
v6.1.3 - 2018-05-31
Updated Linux to 3.18.112
v6.1.2 - 2018-05-30
Updated Linux to 3.18.111
Updated WireGuard
Fix for Deodexed ROMs
Added Fsync on/off toggle (in MTweaks)
v6.1.1 - 2018-05-26
Updated Linux to 3.18.110
Fixed CPU Mods
Updated WireGuard
v6.1.0 - 2018-05-24
Updated Samsung Kernel Source to ERE8
r22p0 GPU Drivers now fixed, removed r15p0
Reverted Magisk back to 16.3 (16.4 had issues with S9 Ports)
Updated MTweaks to 2.8.6
Updated WireGuard
v6.0.4 - 2018-05-20
Updated Ramdisk to ERE8
More Ramdisk Mod fixes
v6.0.3 - 2018-05-16
Updated Linux to 3.18.109
Fixed Ramdisk Mods
Updated Wireguard
v6.0.2 - 2018-05-13
Fixed SuperSU Installation (still shows Knox as 0x1)
Added more Splash Screen Options
Fixed Battery Charging Mods
Fixed CPU Overclocking
v6.0.1 - 2018-05-12
Added r15p0 GPU mods
Fixed Private Mode
AROMA Installer fixes
v6.0.0 - 2018-05-12
Updated Samsung Kernel source to ERD5
Updated Ramdisk to ERD5
Selectable r22p0 / r15p0 GPU Drivers
NOUGAT CHANGELOG
v5.16.3 - 2018-05-06
END OF LIFE FOR NOUGAT
Updated Linux to 3.18.108
Fixed Magisk Uninstaller
MARSHMALLOW CHANGELOG
v3.84 - 2017-06-15
Updated Toolchain (UBER 6.3.1 v1.12.20170615)
Updated Android Image Kitchen to 2.8
Updated Linux to 3.18.57
Fixed Dancedance CPUFreq Governor
Added Spectrum Support (will work on presets soon)
Updated F2FS

reserved

I use this kernel best work... very good...

Updated the kernel to v3.21.

awasome battery life thank you bro.

Kernel updated to v3.30:
- Updated Linux to 3.18.45
Enjoy

Updated the Kernel to v3.31:
Updated Ramdisk to G935FXXU1BPKA
Enjoy

Updated the kernel to v3.32:
- Update Ramdisk to G935FXXU1BPL3
Enjoy

Try your Kernel right now. Thx for your work.
Can you upgrade busybox to the newest in next release?

Hi I want to know which is the best combination of I/O schedule and cpu gouvernos to get better multitasking and performance without affecting too much battery!!!!

Update to BPL3 Source
Hello @djb77, can you please update your kernel to BPL3 base please
Thanks,

Updated the Kernel to v3.40:
- Updated Samsung Kernel Source to G930FXXU1BPL3
Enjoy

Updated the Kernel to v3.41, just a small fix recommended by Google.
Enjoy

there are a ton of gouvernors and i/o schedules available with this kernel!!! which gouvernor is the Best to boost performance and no affect too much battery life? im looking for the Best combination of i/o schedule and gouvernor!!

How to use the governors on this kernel, where are they? thanks

englishsweetheart said:
How to use the governors on this kernel, where are they? thanks
Click to expand...
Click to collapse
This question is not real...
Never used Kernel Adiutor or Synapse? Try it and you will see it.
What do you think are the governors for?
Gesendet von meinem SM-G935F mit Tapatalk

ankabo said:
This question is not real...
Never used Kernel Adiutor or Synapse? Try it and you will see it.
What do you think are the governors for?
Gesendet von meinem SM-G935F mit Tapatalk
Click to expand...
Click to collapse
Why is this question not real? I was just asking as I've never used Synapse before.

is this for marshmallow or nougat
Sent from my Samsung Galaxy Note 7 using XDA Labs

ruudbwoi said:
is this for marshmallow or nougat
Sent from my Samsung Galaxy Note 7 using XDA Labs
Click to expand...
Click to collapse
Look at the thread title, TW 6.0.1 = Marshmallow. TW 7 is Nougat.

[KERNEL][POLARIS][4.9.y] Canting 3.6 [22/08/2021]

INTRODUCTION
Canting is a kernel based on Google Common 4.9 merged over CAF-kernel.lnx.4.9.r25-rel. Built to provide security and stability improvement
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
FEATURES​----------------------------------------------
• NOTE: Don't flash this kernel over MEMEUI.
• Linux version 4.9.280
• CAF Tag LA.UM.8.3.c25-03100-sdm845.0
• Build with Clang-12
• CPU Governors: schedutil, powersave
• I/O Schedulers: noop, cfq
• Compat vDSO from Pixel kernel
• TCP Congestion Algorithm: bbr, westwood, reno, cubic
• WireGuard VPN support (Current version: 1.0.20210424)
• Boeffla wakelock blocker (Nothing is blocked by default)
• Simple Low Memory Killer
• Sound Control: Speaker, Microphone, Headphone (Per-channel control)
• KCAL & KLapse Interface
• Vibration Intensity Control
• backlight min option
• Removed safetynet flags (no need of magisk to bypass safteynet)
• F2FS & NTFS Support
• for more info check my commits
INSTALLATION INSTRUCTIONS​
Download latest kernel version
Boot to recovery
Flash kernel.zip
reboot to system
DOWNLOAD LINK
Github Latest Release
CREDITS
• nathanchance
• bgcngm
• abhishek987
• fransiscofranco
• flex1911
• All of contributors from my git history​
XDA:DevDB Information
Canting, Kernel for the Xiaomi Mi Mix 2S
Contributors
khusika
Source Code: https://github.com/khusika/canting_kernel_xiaomi_sdm845
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.6
Stable Release Date: 2021-08-22
Created 2019-03-05
Last Updated 2021-08-22

Reserved

Reserved

nais

hi
nice, how can we follow the updates ?
thanks

"• NOTE: Don't flash this kernel over MEMEUI"
What the MEMEUI? This not for MIUI ?
Thank you!

heobanhki said:
"• NOTE: Don't flash this kernel over MEMEUI"
What the MEMEUI? This not for MIUI ?
Thank you!
Click to expand...
Click to collapse
Yea

jerome_l said:
hi
nice, how can we follow the updates ?
thanks
Click to expand...
Click to collapse
Just press this, or this

Release 0.2
New build is up
Changelogs :
Merge 4.9.163
Upstream with Lineage tree
Upstream with Google Common 4.9
Fix various clang warn
Add power saving flags to the panels
Introducing KLapse - A kernel level livedisplay module v4.3
clk: qcom: clk-cpu-osm: Use CLK_GET_RATE_NOCACHE
Download link in the OP, enjoy it

Release 0.4
New build is up
Changelogs :
Merge 4.9.165
Upstream with Lineage tree
Upstream with Google Common 4.9
Merge upstream f2fs-stable/linux-4.9.y
Download link in the OP, enjoy it

Very nice kurnelll guys. Running smooth <3

Release 0.5
As of many user ask me to add support of MIUI variant, start with this version and later will support it. But i won't accept kind of bugs comes from MIUI based rom. Because this kernel using lineage tree as based, which some of dummy codes from Xiaomi Opensource are not merged into lineage. And also there are fews driver was introduced in the lineage tree but not supported in the MIUI. There might some of debug codes required by MIUI but not implemented in the kernel. This why i warn you to use lineage based rom for better experience with kernel based on lineage tree.
Changelogs :
Add support for MIUI based ROM (Stupid idea)
Merge 4.9.166
Upstream with Lineage tree
Upstream with Google Common 4.9
Update default RNDIS class for Xiaomi (Fix usb tether issues)

Can it be that you, by mistake, still published the 4.9.165-Canting-0.4 version on GitHub? At least it says so under settings/about the phone.

taw62 said:
Can it be that you, by mistake, still published the 4.9.165-Canting-0.4 version on GitHub? At least it says so under settings/about the phone.
Click to expand...
Click to collapse
I think i missed this

Release 0.6
New build is up
Changelogs :
Merge 4.9.167
Upstream with Lineage tree
Upstream with Google Common 4.9
firmware: update novatek from 9.1.24 beta
Download link in the OP, enjoy it

Release 0.7
New build is up
Changelogs :
Merge 4.9.168
Upstream with Lineage tree
Upstream with Google Common 4.9
Download link in the OP, enjoy it

Release 0.8
New build is up
Changelogs :
Merge 4.9.169
Upstream with Google Common 4.9
Merge tag 'LA.UM.7.3.r1-07400-sdm845.0'
Update wireguard to 0.0.20190406
Download link in the OP, enjoy it

Not sure if it is normal?
khusika said:
New build is up
Changelogs :
Merge 4.9.169
Upstream with Google Common 4.9
Merge tag 'LA.UM.7.3.r1-07400-sdm845.0'
Update wireguard to 0.0.20190406
Not sure if it is normal? wifi can be used normally, but the status bar icon is gray (not connected).
Click to expand...
Click to collapse

tpcglcgl said:
Not sure if it is normal? wifi can be used normally, but the status bar icon is gray (not connected).
Click to expand...
Click to collapse
Yes, CAF pushed a weird commit which caused those issue.
Will be fixed today with linux 4.9.170 merged in.

Release 0.9
New build is up
Changelogs :
Merge 4.9.170
Removal of adiantum patchset
Fixed wifi issue
Download link in the OP, enjoy it

[Kernel][OneUI/Treble][G610X]CronosKernel V5.0

Welcome to CronosKernel for Exynos7870 Devices
J730X | J530X | J710X | J701X | G610X | A600X | J600X
Version : V5.0
Release : 1/15/2020
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
Click to expand...
Click to collapse
​
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro 4.9.4
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]RMM-KnoxGuard Free
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]FsyncToggle
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 9.0 and Treble GSIs
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Encryption Support for StockRoms
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
The kernel supports HKTweaks to manage and control the kernel turntables. Download Here : Github
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock (Google RMM if you had issues)
Flash TWRP Recovery that can be found in J730 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
Kernel does not include Magisk. Download it here if you need it
--Basic Info --
The kernel has been fully refreshed and made from scratch to suite the everyday-changing Exynos7870 Android experience. with support for Treble Roms, OneUI Roms, Pie bootloaders and much more optimizations and improvements to improve both the user experience and developers who choose to use this kernel​
-- Credits --
@topjonhuw For Magisk
@geiti94 For patched SS libs
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post​

Downloads and changelogs
CronosKernel V5.0 1/15/2020 LATEST
[X] Added Front Flash support
OneUI -
Download : AndroidFileHost
Size : 10.6MB
MD5: d96883ec62a33d5ad7dc8a31cc048905
Treble -
Download : AndroidFileHost
Size : 10.4MB
MD5: bbb17801017117fb43631b6aef31675c
CronosKernel V5.0 1/13/2020
This version has been fully reworked and made from scratch, there are new/old features included. mostly its fixes to allow our kernel to work in Pie releases
WARNING : Please update your device to the latest available boot loader and modem. Devices that can be updated to Pie but running oreo bootlaoder is not going to have network.
Devices with too old bootloaders are not going to have keystore. UPDATE BEFORE YOUR REPORT A BUG
[x] Fully reworked and rebuilt from scratch
[x] based on J530FXWU5CSH7 pie source
[x] Supports J530X|J730X|J600X|A600X|J710X|J701X|G610X
[x] Compiled with linaro
[x] many compiler optimizations
[x] Disabled proca,defex,cp_secure,knox,tima,rkp,kap and other samsung security
[x] Fully permissive
[x] Disabled broken spectrum profiles
[x] AOSP specific fixes and optimizations
[x] proper sdfat driver support (for exFAT/fat32)
[x] full F2FS Support for DATA,CACHE
[x] All the previous ramdisk mods, loggers and tweaks
[x] reduced logging spam from AVC, HOTPLUG
[x] Fully disabled samsung Hotplug (Performance with no significant battery hit)
[x] Fixed an issue where 4 cores were stuck on offline
[x] CMDLINE patches for fake knox status
[x] CPU/DEVFREQ/MIF etc voltage control
[x] boeffla wakelock blocker
[x] custom default wakelock blocker list
[x] UKSM 0.1.2.3
[x] Powersuspend 1.8
[x] Dynamic Fsync
[x] Fsync/crc toggles
[x] unlocked tunables for stock governors
[x] toggle archpower and other sched improvments
[x] LZ4 Support
[x] improved block performance
[x] improved devfreq performance
[x] imrpvoed TCP performance
[x] improved memory performance
[x] Support for Pie bootloader devices
[x] wireguard support
[x] Improved CPU Overclocking
[x] GPU Control
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
OneUI -
Download : AndroidFileHost
Size : 64.5 MB
MD5: 2ce69de1525b83fe83f4512efb65dc22
Treble -
Download : AndroidFileHost
Size : 63.6 MB
MD5: 1f6df083b148adc90a5fa15606cf066f
Treble Versions are meant to be used with AOSP roms (on both official and unofficial treble devices) . they have certain patches and MTP fixes
Old releases
HeliosPie V3.1 Update​- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 38.3 MB
MD5: 46dec1efb1f9ac305e859f9a99ca88f1
HeliosPie V3.0 Update​- Updated to Android Pie
- OneUI and GSI Support
- Disabled KnoxGuard (New RMM)
- Updated to EliteTuner V1.1
- 2AMP Charging
- And all the previous features and changes of HeliosKernel
Download : AndroidFileHost
Size : 42 MB
MD5: fc3831f0debedd9fe614798e77e005a6
HeliosPro V2.7 Update​
- Updated Ramdisk
- Fixed some performance and battery issues
- Fixed WiFi and Bluetooth on Stock J5/J7 Roms
- Magisk 18.1
- Linaro 7.4 Toolchain
Download : AFH
MD5 : 8db06bf5daa879dc790f749ac315ed6a
Size : 45.7MB
Old releases and changelogs
HeliosPro V2.6 Update​
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- J5 Removed 70HZ mod so fake displays can work
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.0 Included
Follow the Full change log on the Github source.
Download : AFH
MD5 : 2b11e227741486bf41dceced6c96a66c
Size : 46.6MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J530F/G/Y/YM/FM/GM/S/L/K
J730F/FM/G/GM (And any J7 variant)
​Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Support for 3GB J5 2017 Variants
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
Download : AFH
MD5 : 8594de8b4f2e2292fa8b730093886ac1
Size : 47MB
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J530F/G/S/L/K
J730F/FM/G/GM (And any J7 variant)
​
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
P.S : J7 aod is basic until we get new Oreo drivers for J7
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- J5 2017 70Hz Refresh Rate
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Download : GoogleDrive
Source : Github​
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-J7 Pro Flicker Fix/AOD
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
J530F/G : GoogleDrive
J530Y/YM : GoogleDrive
J530FM/GM : GoogleDrive
Oxygen Kernel control : GoogleDrive
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Add Support for J530FM/YM/GM/G
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
J530F/J530G : GoogleDrive
J530Y/YM/GM/FM [2 FEB]: GoogleDrive
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
Added AOD Partial Support (Reverted in source due to dangerous screen flicker issue)
Download Link : --GoogleDrive--
----------------------------------------------------
-V1.0 Initial release
--DownloadLink--
--Mega--

F.A.Q
F.A.Q​
Q : Does this support Prometheus V2 ?
A : No, this only supports NEW OneUI roms released in august 2019 and up
Q : I dont have lockscreen working
A : you have a very old bootloader, update it
Q : I dot have working simcard
A : You have a very old bootloader/modem update them both
Q : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use HKtweaks from here
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption. it has been disabled due to wasted performance
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock 9.0 and custom Roms made after August 2019​

As a final note, this kernel was made for J5 J7 at first. but it seems to be a popular choice for devs to port to their devices. so i figured to provide a version for most 7870 Devices.
This kernel was previously known as Helios 2.7 . it was available in previous J7 Prime / Nxt Roms. Please note that this is only designed to work one the current OneUI based roms.
if you want a full list of features. please either read the github post. or the changelog i left.
Enjoy

Great work sir...

Does it work on J7 Prime Android 7.0 TW?

does this already come installed on that OneUI rom or this is totally new?

Botaride said:
does this already come installed on that OneUI rom or this is totally new?
Click to expand...
Click to collapse
Updated kernel.prometheus oneui v1 have old one
---------- Post added at 03:02 PM ---------- Previous post was at 03:01 PM ----------
brian-wendrel said:
Does it work on J7 Prime Android 7.0 TW?
Click to expand...
Click to collapse
No

Tank eu sar ❤

HeliosPie V3.1
HeliosPie V3.1 Update​- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 18.6 MB
MD5: 73f5c7f1b66fbad82baffcde05864dcd

Link is not working, can you fix it?

Just to know if i do something wrong or what but i flashed this kernel the new version 3.1 on my blackbird rom wich is android 9.0 and now is bootlooped.

Cardonasc03 said:
Link is not working, can you fix it?
Click to expand...
Click to collapse
Ant4rez said:
Just to know if i do something wrong or what but i flashed this kernel the new version 3.1 on my blackbird rom wich is android 9.0 and now is bootlooped.
Click to expand...
Click to collapse
Links updated redownload.
The kernel was just tested on Blackbird and it did boot. try to reflash it

ananjaser1211 said:
The kernel was just tested on Blackbird and it did boot. try to reflash it
Click to expand...
Click to collapse
Hello, thanks for answer, that is weird i tried to reflash it but is the same, only works with "Oxygen-Kernel-on7xelte-v6.0.138-ONEUI-PIE" but if i flash "HeliosPie_Kernel_V3.1_G610X" i get bootlooped. How can i help to fix this?.
If i take a kernel log with TWRP is going to be useful? Because i can't take a adb logcat when is bootlooping saying the device is unauthorized. Anyways i attached it.

ananjaser1211 said:
HeliosPie V3.1 Update
- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 18.6 MB
MD5: 73f5c7f1b66fbad82baffcde05864dcd
Click to expand...
Click to collapse
Please support asop roms

Ant4rez said:
Hello, thanks for answer, that is weird i tried to reflash it but is the same, only works with "Oxygen-Kernel-on7xelte-v6.0.138-ONEUI-PIE" but if i flash "HeliosPie_Kernel_V3.1_G610X" i get bootlooped. How can i help to fix this?.
If i take a kernel log with TWRP is going to be useful? Because i can't take a adb logcat when is bootlooping saying the device is unauthorized. Anyways i attached it.
Click to expand...
Click to collapse
as i said. redownload the kernel. you are flashing an old deleted zip

ananjaser1211 said:
as i said. redownload the kernel. you are flashing an old deleted zip
Click to expand...
Click to collapse
Thanks for answer, but i redownload the kernel and now i see that is different becasue when i flash it says "For Galaxy G610X" not like before that says "For Galaxy J600X" but anyways i get bootloop.
Edit: I solve this by changing the "cache" partition to ext4 format because i have it on f2fs funny thing because in the changelog says that supports f2fs but that change solve the problem.

It works well on my G610Y together with the blackbird Rom.

Hello Dev!, is the kernel applicable to Sm-A750? I want to use and to test it to determine what is the best kernel for my unit.

icodix said:
Hello Dev!, is the kernel applicable to Sm-A750? I want to use and to test it to determine what is the best kernel for my unit.
Click to expand...
Click to collapse
No way, this kernel is for G610X

[KERNEL] Papaya Custom Kernel Based on EMUI 9.1 Source For Fig-LX1

PAPAYA KERNEL​
Warning:
I am not responsible for bricked devices.
Please do some research if you have any concerns about features included in this KERNEL before flashing it! YOU are choosing to make these modifications.
Requirements:
- Huawei P Smart 2018 Fig-lx1
- Emui 9.x
- Unlocked bootloader
Features:
- Compiled with Linaro GCC toolchain
- Makefile Optimizations
- Zen I/O Scheduler (set as default), Maple, Anxiety
- Westwood TCP Algorithm (set as default) , BBR, cubic, reno
- Disabled Huawei’s root checks in config
- Simple_LMK (Disabled for now)
- Wireguard
- Gpu scene_aware scheduler
- Fsync switch
- Boeffla wakelock blocker
- SELinux switch
- RCU boost
- DSBoost
- Updated ZRam
- Google LMK
Download kernel from my GitHub. The topmost release is the latest.
XDA:DevDB Information
Papaya kernel, Kernel for the Huawei P Smart
Contributors
OnkoFonko
Source Code: https://github.com/onkofonko/kernel_papaya_fig-lx1
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.6
Stable Release Date: 2021-02-21
Created 2019-12-28
Last Updated 2021-02-21

Changelog:
V1.0
- First version
V1.1
- Added and activated Simple_lmk, Disabled Huawei's LMK
V1.2
- Added Wireguard, Gpu scene_aware scheduler, Fsync switch and more optimizations
V1.3
- Added Anxiety I/O Scheduler , Maple I/O Scheduler , Boeffla wakelock blocker
- Updated CFQ I/O Scheduler, BBR TCP algorithm
- Minor fixes and optimizations
V1.4
- Backported scene aware gpu governor from emui 10 source , also raised hispeed freq for gpu
- Reverted mmc and f2fs updates
- Enabled selinux switch
- Updated cpuidle, squashfs
- Dropped min_sampling_rate for governors
- Minor fixes
V1.5
- Enabled RCU boost
- Added and Enabled DSBoost
- Updated ZRam
- Disabled Simple_LMK
- Added and enabled LMK from google
- Optimizations
V1.6
- Added and activated cpu_input_boost
- Updated i/o schedulers
- Disabled DSBoost
- Added and activated dynamic schedtune boost
- Updated binder
- MM tweaks
- Optimizations
- Updated ipv4

0ckysaurus said:
PAPAYA KERNEL​
Warning:
I am not responsible for bricked devices.
Please do some research if you have any concerns about features included in this KERNEL before flashing it! YOU are choosing to make these modifications.
Requirements:
- Huawei P Smart 2018 Fig-lx1
- Emui 9.x
- Unlocked bootloader
Features:
- Compiled with Linaro GCC toolchain
- Zen I/O Scheduler (set as default)
- Westwood TCP Algorithm (set as default)
- Disabled Huawei’s root checks in config
- updated mmc and f2fs
- Simple_LMK (since v1.1)
XDA:DevDB Information
Papaya kernel, Kernel for the Huawei P Smart
Contributors
0ckysaurus
Source Code: https://github.com/ockysaurus/kernel_papaya
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2019-12-30
Created 2019-12-28
Last Updated 2019-12-30
Click to expand...
Click to collapse
Currently testing it on a Q GSI with EMUI 9.1 vendor (FIG-LX1C432 L31 B115)
Any issue, I'll be sure to contact you. Thank you so much for your work.

Since Honor 7x has the same soc, should it work on it or 7x has some major differences?

Papaya v1.6 is up.
This is the last version of papaya kernel from me, you can fork it and improve it if you want. Download it from my GitHub.

0ckysaurus said:
Papaya v1.6 is up.
This is the last version of papaya kernel from me, you can fork it and improve it if you want. Download it from my GitHub.
Click to expand...
Click to collapse
Hi im compiling emui 9.1 stock kernel for Cmr-al19 huawei m5 but i dont know how to extract the Image.gz to kernel.img and other images. Since there are no more ramdisk partition in emui 9. I've searching online for a method but im still stuck

sunnatter said:
Hi im compiling emui 9.1 stock kernel for Cmr-al19 huawei m5 but i dont know how to extract the Image.gz to kernel.img and other images. Since there are no more ramdisk partition in emui 9. I've searching online for a method but im still stuck
Click to expand...
Click to collapse
Hi, sorry for the late reply. There is a folder called "tools" in every emui kernel source and in there you should find pack_kernerimage_cmd.sh script that should help you with your issue.

0ckysaurus said:
Hi, sorry for the late reply. There is a folder called "tools" in every emui kernel source and in there you should find pack_kernerimage_cmd.sh script that should help you with your issue.
Click to expand...
Click to collapse
Thanks for your reply, i didnt notice that there is such script so i compile with mkbootimg haha. Which compiler did you use? I use the google git toolchain pie release from wed mar 21 2018. The kernel is compiled without error but it threw a lot of warnings.

Do you have to modify the source code? I have to modify the dtc-parser file to get it compiled

sunnatter said:
Do you have to modify the source code? I have to modify the dtc-parser file to get it compiled
Click to expand...
Click to collapse
i did not need to edit anything to compile it. I chose Linaro GCC as my toolchain. Take a look at my build script, maybe it will help you to properly build it. I think that you can ignore warnings when compiling. I did ignore them and my kernel works without any issues I guess .

0ckysaurus said:
i did not need to edit anything to compile it. I chose Linaro GCC as my toolchain. Take a look at my build script, maybe it will help you to properly build it. I think that you can ignore warnings when compiling. I did ignore them and my kernel works without any issues I guess .
Click to expand...
Click to collapse
I see, awesome man. My compiled kernel also work without issue but i had to modify the source code a bit for it to compile

hi i just tried gcc-linaro-7.5.0-2019.12-x86_64_aarch64-elf as in your script but it always stop with some drivers error. And i still have to edit the source code to make it compile at first lol. Do you have any idea how to solve it?

sunnatter said:
hi i just tried gcc-linaro-7.5.0-2019.12-x86_64_aarch64-elf as in your script but it always stop with some drivers error. And i still have to edit the source code to make it compile at first lol. Do you have any idea how to solve it?
Click to expand...
Click to collapse
Send me a screenshot of the error and I will try to help you.

Hi, wifi still doesn't work?

DimaK076 said:
Hi, wifi still doesn't work?
Click to expand...
Click to collapse
As well for me, wifi doesn't work .. Have you been able to solve it ?

[KERNEL]JellyKernel [AOSP/CAF] [10]

My personal kernel builds for Xiaomi Redmi Note 7.
New project because old one got deprecated due to me being on hiatus.
Nothing groundbreaking, but should work and be stable.
Some features before you go any further:
-Linux upstreamed to 4.4.219
-No kcal support yet (I'll add it later)
-Optimized with -O3 flag
-A lot of debugging is disabled
-Cortex A73 and Cortex A53 optimization flags
-Latest CAF tag merged into kernel sources
-Reworked DDR bus tables for better performance and responsiveness
-Simple LMK replaces stock Android LMK (credits to @Kerneltoast)
-Android Binder 4.19 backported (credits to @Kerneltoast)
-Pretty generous -100mV undervolt for CPU and GPU
-Latest anykernel3 used for flashing this kernel (credits to @osm0sis)
-LZ4 as a default zRAM compression algorithm
-Adrenoboost incorporated into this kernel (credits to @flar2)
-Initial HDR support for Tiamna panels (read below for additional info)
-Builds with oldcam and newcam will be available eventually
-Compiled using Clang 10.0.2 from Google for maximum stability
-Memory leak fixes
-HMP only
DISCLAIMER:
-Only AOSP/CAF based ROMs are supported.
-MIUI is not supported and don't ask for support.
-With any problem that might happen, logs or no support.
-HDR support is really rough around the edges and only Youtube can properly playback HDR videos upto 1080p30 smoothly.
DOWNLOAD HERE!
XDA:DevDB Information
JellyKernel, Kernel for the Xiaomi Redmi Note 7
Contributors
airidosas252, nathanchance, rama982
Source Code: https://github.com/airidosas252/xiaomi_android_kernel_lavender
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 20200421
Created 2020-04-20
Last Updated 2020-04-20

Reserved

airidosas252 said:
My personal kernel builds for Xiaomi Redmi Note 7.
New project because old one got deprecated due to me being on hiatus.
Nothing groundbreaking, but should work and be stable.
Some features before you go any further:
-Linux upstreamed to 4.4.219
-No kcal support yet (I'll add it later)
-Optimized with -O3 flag
-A lot of debugging is disabled
-Cortex A73 and Cortex A53 optimization flags
-Latest CAF tag merged into kernel sources
-Reworked DDR bus tables for better performance and responsiveness
-Simple LMK replaces stock Android LMK (credits to @Kerneltoast)
-Android Binder 4.19 backported (credits to @Kerneltoast)
-Pretty generous -100mV undervolt for CPU and GPU
-Latest anykernel3 used for flashing this kernel (credits to @osm0sis)
-LZ4 as a default zRAM compression algorithm
-Adrenoboost incorporated into this kernel (credits to @flar2)
-Initial HDR support for Tiamna panels (read below for additional info)
-Builds with oldcam and newcam will be available eventually
-Compiled using Clang 10.0.2 from Google for maximum stability
-Memory leak fixes
-HMP only
DISCLAIMER:
-Only AOSP/CAF based ROMs are supported.
-MIUI is not supported and don't ask for support.
-With any problem that might happen, logs or no support.
-HDR support is really rough around the edges and only Youtube can properly playback HDR videos upto 1080p30 smoothly.
DOWNLOAD HERE!
XDA:DevDB Information
JellyKernel, Kernel for the Xiaomi Redmi Note 7
Contributors
airidosas252, nathanchance, rama982
Source Code:https://github.com/airidosas252/xiaomi_android_kernel_lavender
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 20200421
Created 2020-04-20
Last Updated 2020-04-20
Click to expand...
Click to collapse
Pls add criteria to flash this kernel, i try flashing this kernel but going to fastboot mode, im lazy to flash again n will not flash again...
Thx

not working,
it goes to fastboot