Database Develop

Received an F/W update from Samsung Yesterday!!! India

Hi All,
Im on the Official ICS ROM INDIA...4.0.3 DDLP4
Yesterday, when i checked kies, there was an update waiting (No Update on OTA). The downloading of firmware was taking ages to download(3.2mbps connection) and after about 70 percent the downloading stopped and Kies said "Connection stopped"....
Any body who has downloaded the F/W can you please post the change log (If you find any).. I mainly wanna know, if the laggness of the lock screen and slowness to open contact's and capturing pics has been rectified.

Ramith123
Ah glad that i have company.sad at the same time!! Even i have the same problem after the 7mb OTA update. The andriod process closes often and hangs the phone.The phone was literally unusable. Hence i tried to install custom gingerbread rom on it. Now its almost completely bricked.How irresponsible is samsung to roll these things out without testing it thoroughly.
***PLEASE DON'T INSTALL THE 7MB ICS OTA UPDATE***
hopefully we can save some.

I also tried to update through OTA but it was failed and message popped up that do update through Kies. Now I got update through Kies and my firmware changed from DDLP4 to DDLPA. However I lost Root.

I also received the update notification. Downloaded the 7.8 mb update within a minute and asked for reboot. Everything worked fine and nothing special noticed. It just changed the build no. from IML74K.DDLPA to IML74K.DDLP8

dushy4 said:
I also received the update notification. Downloaded the 7.8 mb update within a minute and asked for reboot. Everything worked fine and nothing special noticed. It just changed the build no. from IML74K.DDLPA to IML74K.DDLP8
Click to expand...
Click to collapse
you mean LP8 to LPA? check your kernel version date. if it shows 12 June then fine, else your kernel has not been updated.

Hey guys basically its stability update. my phone feels much smoother now. i updated OTA via wifi, i also faced update not installed issue and i found out the problem, basically we all root our device that means we change SU binaries so when updating phone OTA it checks for those binaries and if these binaries are not official OTA update get aborted. i solved this problem like this,
1) I have downloaded STOCK LP8 firmware from samobile.com when it released
2) As my phone is rooted my SU binaries are changed so OTA update is aborted.
3) So FLASHED Stock rom LP8 from PC ODIN which kept my all DATA, APPS intact i just lost my root and some mods like 15toggles status bar and so..
4)then i started updating my phone using S/W update in settings, its 7.85MB file.
5)In few minutes my phone is updated to LPA
6)Now i again rooted my phone and my all data apps are intact and mob is much improved in stability.
Hope this will help you guys.

anjath said:
you mean LP8 to LPA? check your kernel version date. if it shows 12 June then fine, else your kernel has not been updated.
Click to expand...
Click to collapse
It still shows 12 may,,, But i read in some other thread that kernel was not updated in this update.

dushy4 said:
It still shows 12 may,,, But i read in some other thread that kernel was not updated in this update.
Click to expand...
Click to collapse
kernel is definitely updated in LPA. just flash LPA ROM file using Odin.
I also agree with what mullarameez has pointed out. rooting might be the reason for kernel being skipped. because if u flash LPA with odin you will lose root and hence get the new kernel.

Is there a way to update Kernel without flashing the whole 650 mb rom?

with all the issues in ICS, i think it would be safest if you would flash using the whole LPA ROM. I know its a pain to download but worth it in the end.

OMG! just a 7Mb update took 2hrs to download.. Hmmmm...
My main prob was with Lock screen, camera and contacts.. Noting has been resolved on this new Update!!!

what is the issue? is it lag?

This is confusing..
I have everything stock on my phone..All updates done OTA since i bought the phone..Not rooted..
Still the kernel says 12 May after the 7mb update..Why?? Although the deep sleep issue (sore point for me) seems to have been resolved after this update...
PS: The build info after *#1234# says 12 June, if that matters..

yes, almost all the users who updated OTA have the same issue. you may flash the new LPA using PC Odin from doc's post (anyways you're not rooted so no problem)

Way to force OTA Monthly security update?

I'm sitting at December update and not getting January although my friend also on AT&T got Jan already on his 5x.
Is there a way to force it or download just the OTA update for a sideload? All I can find are full 1GB images.
Thanks

svassh said:
I'm sitting at December update and not getting January although my friend also on AT&T got Jan already on his 5x.
Is there a way to force it or download just the OTA update for a sideload? All I can find are full 1GB images.
Thanks
Click to expand...
Click to collapse
you can try check for updates option in about phone, while on WiFi. but waiting for them is usually quicker.

svassh said:
I'm sitting at December update and not getting January although my friend also on AT&T got Jan already on his 5x.
Is there a way to force it or download just the OTA update for a sideload? All I can find are full 1GB images.
Thanks
Click to expand...
Click to collapse
MMB29S from MMB29K

Security Update - M1D65H

This may be the last 1.x Update with Security Updates only.
Can be downloaded here:
https://android.googleapis.com/pack.../bbc83804a8232728723b45cc86a0169fb0a0ed02.zip
sideload possible via recovery
Code:
adb sideload file.zip

Thanks bro ^^

Updated it through OTA...
Thanks anyway,
BTW, I think it means that it will take some time for 2.0 to rollout :\

yot2703 said:
Updated it through OTA...
Thanks anyway,
BTW, I think it means that it will take some time for 2.0 to rollout :\
Click to expand...
Click to collapse
No watch has it yet doesn't seem like its started rolling out

liam_davenport said:
No watch has it yet doesn't seem like its started rolling out
Click to expand...
Click to collapse
you never know, releasing this secuirty update after 2.0 would make no sense either. maybe they quickly pushed this last security update to get 2.0 on the road very soon.

I had issues with the battery percentage not showing properly after this update. It took several reboots and I am still suspicious of the value it's showing now.

endrancer said:
you never know, releasing this secuirty update after 2.0 would make no sense either. maybe they quickly pushed this last security update to get 2.0 on the road very soon.
Click to expand...
Click to collapse
Hopefully that's last patch for MM, 2.0 should be any day now

i've got this update as well just today.Yet, it's 1st February update, so the next one hopefully should be AW 2.0

is this the update i just installed on the watch right now? it seems like its taking a long time to upgrade for just a security update

Is the update still available? On my watch it fails to download. Also the link for the package doesn't seem to be working either.

Akbhar said:
Is the update still available? On my watch it fails to download. Also the link for the package doesn't seem to be working either.
Click to expand...
Click to collapse
link in first post works, can just sideload it if you are not able to download it on watch.

endrancer said:
link in first post works, can just sideload it if you are not able to download it on watch.
Click to expand...
Click to collapse
The link you mentioned is no longer avaialable:
Unable to connect
Firefox can’t establish a connection to the server at redirector.gvt1.com.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer’s network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Click to expand...
Click to collapse

The link works. I just tested it with my phone and last night before my previous post. It might be blocked on your side.

Works here too, What I used to update my watch :good:

You are right, I can download the file using another ISP. Thank you.

Hi, thanks for the link.
Do I need to have any pre-requisite firmware version to be available in my watch (LG urbane - w150).
Currently I have M1D63G and using "adb sideload <package.> it is getting failed after 43% - in verifying package.

help me
how to disable update ota via cmd ?

Hello,
I did the downgrade from AW2 to (the best!) AW1.5 with MEC23G version.
Trying to update with the lastest AW1.5 version M1D65H (downloaded from this topic), using ad sideload but even looks like everything went okay, I still in MEC23G.
Does anybody know why or what I need to do to get the latest AW1.5 update?
Thanks

Helpl

Helpl! I updated my phone to b381 ota mf around 400 to 500mb using ff all is good the security patch was updated to march 2017. Yesterday i try to update again by using the full ota mf which is around 1.5gb to 2gb after the update was finished all my huawei stock apps and keyboard our disabled and i dont have any mobile signal. Should i rollback and update again? What version i can roll back and how can i do it. Thanks in advance! My phone is eva-l19c636

grantstmatt said:
Helpl! I updated my phone to b381 ota mf around 400 to 500mb using ff all is good the security patch was updated to march 2017. Yesterday i try to update again by using the full ota mf which is around 1.5gb to 2gb after the update was finished all my huawei stock apps and keyboard our disabled and i dont have any mobile signal. Should i rollback and update again? What version i can roll back and how can i do it. Thanks in advance! My phone is eva-l19c636
Click to expand...
Click to collapse
Soloution:
https://forum.xda-developers.com/showpost.php?p=71965567&postcount=18

Verizon Note 9 March security patch rolling out OTA

Just got a notification for update 6 on my VZW Note 9. This should be build 1CSC1 with the March security patch included. I haven't had a chance to update my phone yet.
Also, I sideloaded builds CSAA and the current CSB3 that I'm on now, via stock recovery and SD card and I'm receiving official OTA's from my carrier. I know some were worried they may not receive official OTA's if they sideloaded those builds. I'm just re-confirming what others such as Mr. Orange have said that you will be back on the official OTA train being on the sideloaded CSB3.

Thank you. I am waiting for an update since I sideloaded Pie last month.

CliftonFoster said:
Thank you. I am waiting for an update since I sideloaded Pie last month.
Click to expand...
Click to collapse
Yeah, no problem. Just wanted to get it up asap to let those who still worried about not getting official OTA's anymore because of sideloading, that they will still get official OTA's as long as they're on CSB3. Here's a screenshot of the about screen with the new build running, I didn't update till recently.

The big question is whether or not Substratum/Swift Installer is still working with this update.

Guyinlaca said:
The big question is whether or not Substratum/Swift Installer is still working with this update.
Click to expand...
Click to collapse
Still working on my end

tgee0907 said:
Still working on my end
Click to expand...
Click to collapse
Please help if anyone knows an answer to my issue. I have a Verizon note9 I updated from oreo to pie manually through recovery now I am no longer getting ota updates,even if I search for them. I was told that side loading pie would not effect later OTA's . Is there a way to fix it or I somewhere I can download the updates and install through recovery would be ok too. But can't find them anywhere.

Azag Thoth said:
Please help if anyone knows an answer to my issue. I have a Verizon note9 I updated from oreo to pie manually through recovery now I am no longer getting ota updates,even if I search for them. I was told that side loading pie would not effect later OTA's . Is there a way to fix it or I somewhere I can download the updates and install through recovery would be ok too. But can't find them anywhere.
Click to expand...
Click to collapse
Which version of pie are you still on? CSAA? If still on CSAA, you'll have to install the CSB3 pie build. The CSAA to CSB3 zip to put on your SD card and flashed through stock recovery can be found here within the Note 9 threads. Once you're on CSB3, you'll get OTA update notifications for the next couple OTA updates.

Justinphxaz said:
Which version of pie are you still on? CSAA? If still on CSAA, you'll have to install the CSB3 pie build. The CSAA to CSB3 zip to put on your SD card and flashed through stock recovery can be found here within the Note 9 threads. Once you're on CSB3, you'll get OTA update notifications for the next couple OTA updates.
Click to expand...
Click to collapse
Odin files for April CSD1 build are listed in another post.

Does anyone happen to have a link for that CSB3 zip

Azag Thoth said:
Does anyone happen to have a link for that CSB3 zip
Click to expand...
Click to collapse
Why Not Odin To Latest April Patch CSD1 build

Venom0642 said:
Why Not Odin To Latest April Patch CSD1 build
Click to expand...
Click to collapse
I do not have Odin setup and have never used it . Plus do not have access to a computer at this time. Also would just like to flash it off sd card and start getting my ota updates again. I have the file but it keeps aborting not sure what the issue is .my sd card is encrypted do I have to decrypt it before flashing the update?

Alright got the file (cbs3) and flashed from recovery, and then my ota updates started coming in so I am all updated and life is good. Now I'd I could just figure out why a week ago I stop being able to download apps or update installed apps from xda (from here) not sure what happen or why but when I try it starts to go through the motions ana them I get download failed. Any ideas would be greatly appreciated. I have tired all the usual fixes, clear cache and data uninstall and reinstall xda app,no help...