Related
This is a guide from a noob who spent a few hours today on my wifes phone trying to get it into Download mode after using Master Clear.....Worked fine before Master Clear but I wanted all the root apps IE Titanium) gone which the stock ROM update did not do. Being a total noob at Android and the Captivate being my first foray I though I would try to provide noob instructions to cover most bases. Most of the instructions here are scattered and not easy to find or are incomplete and make assumptions. This is specifically for those who cannot get into recovery or download mode.
Recovery/ Download modes are SEPARATE modes for for different uses.
I used recovery mode to "root' the phone AFTER putting the "update" file into the root directory using USB mass storage mode.
I use Download mode to install ROMS such as Stock and the 2.2 update.
My biggest issue was having a device that Would not GO INTO RECOVERY/DOWNLOAD MODE using any combination of button presses which it did before I Master cleared the phone. . Very frustrating. So I decided to bite the bullet and use the SDK mode. This first part will guide one on how to use the Android SDK and Command Prompt.
The assumption is all the drivers have been loaded for the Samsung Captivate.
First you need to have JAVA installed in your PC ( I did not)
The next you need to download the SDK package readily available
http://developer.android.com/sdk/index.html
This is what I did:
1. Created a folder called SDK on my C drive root directory.
2. Copied the android-sdk_r07-windows.zip SDK file to that directory
3. Extracted the ZIP into a newly created folder in that Directory
4. Deleted the Downloaded Zip package.
5. Moved all files from the new folder created by the extraction to the root SDK directory and deleted the now empty folder they came from. (This makes the path to the tools folder simple (as you will need to type that path out exactly in command Prompt)
My Path looked like this C:\SDK\Tools . Doesn't matter how you get there but tools folder must be in the path and the path must be exact
Next I started my Captivate normally and put my Captivate in USB debugging mode. Plugged in the USB.
I then opened the ODIN file I wanted to use whether original stock ROM or the new Froyo ROM
1. Opened command prompt on PC
2. Type CD\ to start at C root directory
3. from there I typed in CD \sdk\tools\
4. The next step involves the typing the command to open the screen you want the Phone to use...Recovery or download
4. Type in adb reboot recovery for the recovery screen (This gets you into the "three button screen" with no USB attached many cannot get into.
5. OR type in adb Reboot download to get the yellow download screen...
From there ODIN should indicate a com port..You hit start and the new ROM will be installed. There should be NO hangups on the indicated steps within ODIN. it happens pretty quickly.....YOu will see a filler bar at the top of ODIN and a blue line filler across the phone as the ROM is loaded.
I used Froyo..and discovered with Froyo I did not need to use the SDK method to get into recovery mode.....Froyo fixed that.
I have two Odin files. One for Jf6 Stock and the new 2.2.
I updated the JH7 FW using mini Kies in debugging mode. That was the only way I could load that FW which did not work OTA.
Bottomline is this is not a Hardware phone replacement issue if one cannot get into download mode. It is all about the FW in the phone. IF you can use the SDK you may likely not have to use it again.
OK ALL YOU EXPERTS Please correct or certify the steps.
Just trying to hep those who cannot read a 110 page thread that goes in many different directions.
Very nice instructions...
This type of detail is refreshing to see. Nice to see that assumptions aren't made. This type of detail can eliminate a lot of questions/posts.
I would just add - make sure you grab the right SDK - 1.5 ADB will not work with 2.1.
Thank You !
Followed your instructions but..
I tried to use sdk tools to reboot into download mode this is the specific comand I use:
adb reboot download
If I type this in the phone acts like i typed
adb reboot
The fact is that I searched help in the comand line and there is no reboot download only reboot recovery or reboot bootloader.
I cant get my kyocera torque into download mode and that is the problem I have also tried to boot with keys pressed nothing works. I want to get the phone to download mode so that I can install cwm recovery through odin
Maybe there is a esier way ?
U can make or buy a download mode jig. Quick search in the Captivate forums will show ya a thread of how to make one. Plus a lot of videos r on youtube as well.
Sent from my Nexus 5 using Tapatalk
May NOT work for 2.3.3, if attempting on 2.3.3 use old part 1! - Will wipe all data though
Windows ONLY!
Hey guys, rooted my Nexus S today, and decided to write a thorough, detailed guide on how I did it, as none of the guides I had found had everything detailed. I came across a few problems, and all of this is in the guide. I successfully completed it on my Nexus S running 2.3.2, so any version below that will also work.
The original guide was made by AllGamer, and can be found here. I followed this guide, and added things when I found it was needed
The full guide with everything (including links, pictures) can be found on my site, Complete Android.
New info: Upon finding another thread over at XDA (http://forum.xda-developers.com/showthread.php?t=931865) it has been realized that you can root your Nexus S without unlocking the bootloader, and therefore not loosing your data on the SD card. Part 1 for the new method is still the same, but choose the new Part 2!
WARNING: Rooting your device will wipe all data off it, so you will loose EVERYTHING! Make sure you backup all important data first. Only applies to old Part 2 (fastboot oem unlock method), but it is still a good idea to backup important information!
Click to expand...
Click to collapse
What you will need:
Nexus S (obviously)
Android 2.3 SDK
USB Cable
PDAnet (for drivers)
Clockwork Recovery Image
Superuser
Part 1
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Once it has finished downloading, unzip it, and run the SDK manager.
Select whatever components you wish to install, but you MUST make sure you install Google USB Driver (Available packages > Third party Add-ons > Google Inc. Add-ons > Google Usb Driver package, revision 4) otherwise this guide will not work!
We must now install the Google USB Driver, or the phone will not be recognised as a device other than a mass storage device.
Connect your Nexus S to your computer, and put it in USB storage mode.
Put it in USB Debugging Mode (Settings > Applications > Development > USB Debugging)
Windows should now recognise your Nexus S when you plug it in, and ask to install drivers. It probably won’t find anything, so we need to help it manually.
(Installing drivers manually varies between Windows versions, so please refer to http://developer.android.com/sdk/win-usb.html if you are having trouble). Launch Device Manager (you can find it in Control Panel), find Other Devices, and listed under that heading, you should find Nexus S. Right click, and select Update Driver Software. Click Browse my computer for driver software, find your SDK folder, then the google-usb_driver folder inside it, click OK, then Next. This should install the USB driver successfully. Reboot your computer.
Power off your Nexus S, connect it to your computer via USB cable, and boot it into the Bootloader Interface (you can do so by holding down the Power and Volume Up buttons at the same time).
It should say LOCK STATE – LOCKED, in white just above the green Android. You are now ready to move on!
Part 2 - Fastboot oem unlock method - WIPES ALL DATA!
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use ‘fastboot oem unlock’ (the rooting command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn’t).
Now in the command prompt, type in (without the quotes) ‘fastboot oem unlock’.
Now turn your attention to the phone, and read through the new information displayed on the screen. Using the Volume keys select Yes, then press the Power button. This will WIPE EVERYTHING! I bear no responsibility for any lost data on your phone!
If everything is successful, on your phone, the LOCK STATE should now read UNLOCKED, and on your computer, the command prompt window should say something like this:
Download the Clockwork Recovery image (here if you don’t already have it) to your Android SDK tools folder (*Android SDK*\tools).
Rename the newly downloaded Clockwork Recovery image to ‘recovery.img’ (no quotes).
Now we need to flash it to our Nexus S, so enter this command into the Command Prompt (make sure it is in the Androis SDK tools folder!) ‘fastboot flash recovery recovery.img’ (without the quotes).
If all is successful, the Command Prompt window should look something like this now:
Download the superuser app to the Android SDK tools folder.
Power on your Nexus S, leaving it connected to USB.
Mount the USB storage, and drag and drop the superuser .zip file you just downloaded into the root of the internal SD card (so Computer > *Device Name*, not in any other folders!). It should look something like this:
Power off the Nexus S, and return to the Bootloader Interface (step 9, part 1).
Select Recovery using the Volume buttons, then the Power button.
The phone should reboot into Clockwork Recovery, but if not don’t panic, just repeat steps 9-12, including downloading a new copy of the file (mine only worked the second time around, don’t worry!)
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot. (You will now also have an unlocked padlock when you boot up)
Done! You now have to set up your phone again like when you first got it, but it will be rooted now.
New Part 2 - Does NOT wipe everything - Keeps a locked bootloader
Make sure Part 1 is completed.
Make sure you have downloaded the Clockwork Recovery file and the Superuser file.
Move the Clockwork Recovery file to your tools folder within the Android SDK folder, and rename it to recovery.img (for simplicity).
Connect your Nexus S via USB to your computer and mount it as USB storage. Copy across the Superuser file to the top level of your sdcard. (So the first window you see, not in any other folders. The sdcard is just where all the files are stored, don't worry about it too much for now).
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don't worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use 'fastboot boot' (the boot image command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) 'cd c:\*YOUR SDK*\tools'.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn't).
We now need to use the 'fastboot boot' command to load Clockwork Recovery onto our Nexus S. In the command prompt, type in the following (but without the quotes, as always) 'fastboot boot recovery.img'
Once you are in Clockwork Recovery (it may take a couple of tries, don't panic, just redownload Clockwork Recovery, and complete steps 3 and 10, part 2) it should look something like this:
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot.
Done! You should still have all your data present on your phone, and have root access!
Notes
As AllGamer said in his tutorial:
It’s normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you’ll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you’ll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Keep this in mind! It's not because you did something wrong
Also, some root apps require BusyBox to be installed, as I found out with Titanium Backup, so once you set up your Nexus S again, head on into the Market, and download BusyBox. It installed fine on my Nexus S this way, and now TB works fine.
I hope this is the best, most thorough guide you will find on rooting the Nexus S. Enjoy! Feedback is appreciated, and I will help out if you need any extra help.
Your guide has been wonderful however I'm stuck on part 2, step 4. I tried writing in the path to my directory and they keep giving me whatever I wrote in the command prompt "is not recognized as an internal or external command, operable program or batch file"
"Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’."
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
STARSCR33M said:
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Click to expand...
Click to collapse
Ok so if you want to change directories in the command prompt, you need to use the command
Code:
cd
So in your case I would type in
Code:
cd c:\Users\Du\Downloads\android-sdk_r09-windows\android-sdk-windows\tools
That way is fool proof, however you could take a shortcut, because you are already in the Users/Du folder (because of how it looks when you first open it), you could just type in
Code:
cd Downloads\android-sdk_r09-windows\android-sdk-windows\tools
Hope that helps
ravidavi said:
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Click to expand...
Click to collapse
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
EDIT: New approach added, now there is choice and easyness for all
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
Click to expand...
Click to collapse
Thanks
Jonathon Grigg said:
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
Thanks
Click to expand...
Click to collapse
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step. Once you're in clockwork you pretty much own the phone. I'll be interested to see if someone can use clockwork to flash a new boot image once rooted without the unlock; if so I can't see any reason to unlock the bootloader. That said, mine is unlocked, and I like it that way, but many won't root for fear of losing data on the phone.
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it. I guess that's there own fault for not doing enough searching on their own...
Anyways, nice and thorough effort. I'm sure many will benefit from your additions to AllGamer's tutorial.
distortedloop said:
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step.
Click to expand...
Click to collapse
I have been wondering that myself. My guess is that for the average user you don't need to, but maybe it's for real power users who build their own ROM which has been fully modded or something, I'm not sure.
but many won't root for fear of losing data on the phone.
Click to expand...
Click to collapse
I definitely agree with that, and your guide is probably the best way for those people!
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
Click to expand...
Click to collapse
Exactly, this is one of the better uses for both methods. I already had to wipe my phone twice due to Samsung CS so I'm used to it Although it does give you a chance to clear out the apps you don't need. Doing that I noticed better battery life on my phone.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it.
Click to expand...
Click to collapse
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Thanks distortedloop
This is awesome cause i relocked my bootloader i really just needed root. Thanks!
Edit oops lost track of tabs open.
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Jonathon Grigg said:
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Click to expand...
Click to collapse
Nicely done. Thanks.
sam4free said:
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Click to expand...
Click to collapse
That's what I suggesting a couple of posts above (root without unlock to at least make a backup of user data).
Restoring a titanium backup would not re-lock the phone. A nandroid restore might, depends on what all it imaged and restores, but it's so easy to re-root, that doesn't seem like a big deal.
Jonathon Grigg said:
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Click to expand...
Click to collapse
Looks like you forgot to add the link in your copy pasta.
AtomicPC said:
Looks like you forgot to add the link in your copy pasta.
Click to expand...
Click to collapse
I've been working on it I just wanted to get it up here as soon as I could That's why I mentioned that the full guide is available on my website. I'm going back to school today, so I don't really have too much time for changing links now. Besides, most people on XDA should know how to look at the 'What's needed' part
Sent from my Nexus S using XDA App
Jonathon,
Thank you for posting this detailed guide to rooting without losing your data! I do have a question. As you've probably heard, there are a few updates coming soon and if they are like they were on the N1, they always broke root. So getting root back was tricky unless I "unrooted" before applying the update. Using your method, is it easy to "unroot"? Thanks!
No problems
As for your problem, I never actually had a N1 so I don't exactly know why that would happen. So far from the 2 updates available to NS owners it seems like the OTA update does break root but it appears to be the same to get it back again. Can someone confirm this? I haven't been through an update with my root yet.
As for unrooting, if you haven't unlocked the bootloader (so you have followed the new part 2) I think it is just a case of finding a stock image (I think there's a GRH78 one around here somewhere) and booting into Clockwork Recovery and flashing it. That should remove root and then also give you a notice to install the GRH78C OTA update so you get the latest version.
I think that is what you meant? If you did unlock the bootloader (using the original part 2) then I think you just have to follow the same steps as I mentioned just then but afterwards go back into the bootloader interface and run 'fastboot oem lock' and it should be right.
Sent from my Nexus S using XDA App
Question on Part 2- step 1.
Code:
# We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
hmanxx said:
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
Click to expand...
Click to collapse
When I tried to use the fastboot command with my Nexus S connected, it would hang and not do anything, despite leaving it for about 5 minutes. I searched online, and found the PDAnet solution, so I don't know what the difference is exactly. All I found the Google SDK USB drivers to do is enable you to see your device in Device Manager, however you could try it without the PDAnet drivers, and let me know what happens!
Thanks
Thanks for the prompt reply.. I tried out the google driver..it doesnt work under fastboot. I eventually get the fastboot enabled driver..that could explain why the pdanet driver required.
After i installed the fastboot enabled driver, i could test the connectivity under fastboot with "fastboot devices"
thanks going to try out rooting..i just want simple root access..without wiping data is a ++ ..
I managed to run fastboot boot recovery.img...going into clockwork menu..apply the superuser.zip.(for froyo version)..till completion..no word of failure..
However after rebooting, su and SuperUser.apk are not installed.( I used adb to check the system/app and system/bin folder.
Edit- manage to root properly after system mounting .
Just a note..to properly complete the rooting, one need to apply mounting then mount system before applying the Superuser.zip install from sdcard.
Prior to step 11, you may want to add the following steps for folks having problem to get the superuser.zip to install properly.
Originally Posted by droidmage
So all you guys who are having trouble getting root inside the rom, When your in recovery before you flash the superuser.zip file select -- mounts and storage -- then --mount /system -- then flash the .zip file and reboot
Click to expand...
Click to collapse
Thanks for the extra bit of info, I will attempt to add that in when I get a bit more time on my hands. when I did it it seemed to work fine so thanks for discovering that!
Enjoy your rooted phone
Sent from my Nexus S using XDA App
hi, this is how i managed to get root working on my tab, everything went fine for me till it came to booting into recovery then nothing use to happen so i combined two separate guides to get it working. thanks (bcmobile and 411tecknology)
the command in "(getting root 5) )" worked for me as i was getting stuck with "fastboot flash recovery skitzandroid-recovery.img"
i unlocked the bootloader by firmware upgrade the the following
for all those people like me with no experience in dos commands or linux, hope this works for you
PREPARE:
1) With your Tab in fastboot mode (step 1 of “GETTING ROOT” below), make sure you have a working fastboot implementation:
working dir\\fastboot devices
If all is well, you should see your device serial number. If there is a problem, you won’t get any response.
2) Downlad the two files attached to this thread
3) create a folder in drive c naming it "root"
This will be referred to as the working directory throughout the rest of this guide
4) Copy skitzandroid-10-1v-root.zip to your working directory (DO NOT UNZIP!) c: root
5) Extract the skitzandroid-recovery.img file from skitzandroid-stock-recovery.zip to your working folder. Your working folder( c: root) should now have 1 IMG file and one ZIP file.
6) copy fastboot files to the the folder that you are going to use as working dir ( c:root)
7) Copy the skitzandroid-10-1v-root.zip file to the root of your sdcard. You can eithe drag/drop, or run:
working dir or c:\root>adb push skitzandroid-10-1v-root.zip /sdcard
GETTING ROOT:
1) Power off your Tab and power it back on, while holding the VOLUME DOWN button.
2) When the DOWNLOAD / FASTBOOT icons appear, press VOLUME DOWN again to select FASTBOOT icon (the one with the USB logo) and press VOLUME UP to confirm selection.
3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
4) Open a terminal / CMD prompt and CD to your working folder
keep doing cd.. until you get to "c:>" then
cd/root
5) Run the following command:
c:\root> fastboot boot skitzandroid-recovery.img
..and wait. It might not look like anything is happening but it is.
6) You should now have a recovery menu. Use the volume rocker (up/down navigates menu options)
to select “Install zip from SDCARD” (or something like that)
7) Navigate to the root of your internal storage (/sdcard), select the skitzandroid-10-1v-root.zip file and press (tap!) the POWER button to confirm selection.
Once complete, use the Volume rocker to select “REBOOT” from the menu and press (tap!!!) the POWER button to confirm selection.
9) YOUR’RE DONE. Press the thanks button on this thread to continue
TESTING:
Check your apps menu to confirm the existence of SuperUser app.
whats wrong with this?
http://forum.xda-developers.com/showthread.php?t=1079781
Nothing!
I used it on UNLOCKED 10.1v (not from Vodafone) and had no data loss!
Great, Thanks
Frank
I do not understand: 3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
Where do I enter this data?
I mean - fastboot deviсes
TNTCOSMOS said:
I do not understand: 3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
Where do I enter this data?
I mean - fastboot deviсes
Click to expand...
Click to collapse
once you start your device in fastboot mode and connect it with the computer to make sure your device is recognized by the computer you open command prompt take it to your working dir.. (ie. c:>root) in our case type fastboot devices and hit enter, if your computer recognized your device you will the serial number under it.
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
TNTCOSMOS said:
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
Click to expand...
Click to collapse
assuming you have installed sdk if not please do so, then staying in sdk go to
(C:\android\android-sdk-windows\platform-tools ) by clicking your mouse in desktop
(not cmd prompt). above eg.. is how i installed sdk on my desktop yours may be different, now in platform-tools you will see two files called fastboot copy them both to to your folder called ..root.. and you are set to go.
bottom line is if you want to start fastboot from any folder in cmd you have to have these two files in the folder.
also if you know that your device is detected by your computer dont worry about step 3. all it does is tell you that your device is connected.
I have all turned out, the problem was the drivers. I copied the driver from pdanet and it worked!
TNTCOSMOS said:
I have all turned out, the problem was the drivers. I copied the driver from pdanet and it worked!
Click to expand...
Click to collapse
Glad to hear that you finally got the root.
same problem
TNTCOSMOS said:
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
Click to expand...
Click to collapse
i've tried with pdanet too but it's not working....like the computer can't see the device...any ideea ???
and when i write "fastboot boot ......etc......" it says <waiting for the device>
please help
You need the drivers installed for fastboot, have you installed them? Please have a look at the [Guide] Unlock your bootloader thread. it contains all the details to get fastboot working.
thank you...finally did it
another noob question...how do i enter in cwm for installing another ROM ???
zbuggy said:
thank you...finally did it
another noob question...how do i enter in cwm for installing another ROM ???
Click to expand...
Click to collapse
The easiest way if you are rooted is to install rom manager from the market. It has an option to reboot to recovery if you have CWM installed. It also allows you to update to the latest CWM recovery if there is one.
i've tried putting the TB Galaxy 1.0.9: Honeycomb 3.1 + TouchWiz UX and i made a mistake... in cwm i've uploaded the zip file only with the update and not the rom itself.since then the tab won't start...it stop's in the beggining at the "samsung galaxy tab 10.1v"...any ideea...what can i do ?
Download latest rom and instructions from samfirmware.com using odin Get ur tab into fastboot mode with 3 button recovery and start from scratch.
It should work out
Sent from my GT-P7500 using Tapatalk
zbuggy said:
i've tried putting the TB Galaxy 1.0.9: Honeycomb 3.1 + TouchWiz UX and i made a mistake... in cwm i've uploaded the zip file only with the update and not the rom itself.since then the tab won't start...it stop's in the beggining at the "samsung galaxy tab 10.1v"...any ideea...what can i do ?
Click to expand...
Click to collapse
Do the following. If you have not yet odin.
Download the full rom.
Follow instructions in how to get into fasboot in sticky thread.
Once in fastboot you can load recovery via it, to do that download the recovery from droidbasement.com/blog, search on pershoot's website for recovery 4.0.4 if i remember correctly then type
fastboot boot recovery.img
where recovery.img is the name of the file you downloaded from droidbasement.com
Recovery will then load give it a minute or so.
Once loaded you can push the downloaded full rom via adb. That is part of the android sdk.
Like this: adb push romfile.zip /data/media/ (this will take a few minutes)
Then in cwm instal rom.
I hope it helps. Btw, remember you need to flash the wipe script of the rom before you install the rom if you are comming from stock.
Send from my GT-P7100
10x everybody it worked!!!!!!!!
Still me, posting in yet another thread. Still can't get the proper drivers. Pda method is not working. Which version of PDanet should I use ? The latest ? This is ****ing irritating...
I'm used to have to struggle to get things work at the beginning, but with my Magic and Hd2 it was a matter of hours...not weeks ! I'm sure it's something stupid but everybody deserted these guides topics...
I'm actually considering posting in the Dev section just to get attention...
Also, pershoot blog's advices are a joke : with no tags, a not working search field, no categories, try to find an info ! Knowing that the word "Recovery" will pop about 3 times per subject, I'm good to spend the week-end searching...
DannyBiker said:
Still me, posting in yet another thread. Still can't get the proper drivers. Pda method is not working. Which version of PDanet should I use ? The latest ? This is ****ing irritating...
I'm used to have to struggle to get things work at the beginning, but with my Magic and Hd2 it was a matter of hours...not weeks ! I'm sure it's something stupid but everybody deserted these guides topics...
I'm actually considering posting in the Dev section just to get attention...
Also, pershoot blog's advices are a joke : with no tags, a not working search field, no categories, try to find an info ! Knowing that the word "Recovery" will pop about 3 times per subject, I'm good to spend the week-end searching...
Click to expand...
Click to collapse
Hello,
I have been successful with rooting on win7. With win xp - after a few day struggling - fastboot did not give a go. Hope this helps
I just can't get the "Adb Original" signature from Pdanet. I always get standard Adb. I add the galaxy tab lines in the .inf file but still...
Do you guys edit the inf file with Wordpad or another tool ?
Hi everyone,
I see more people than usual having issues with Rooting their Nexus 7 because of problems with booting into CWM recovery post flash - thought I would do a nice plain and easy to follow guide including instructions for booting into CWM recovery from a command point (thanks to Wugfresh for his Toolkit which is used in the guide).
http://www.androidnz.net/2012/07/how-to-root-your-nexus-7.html
Porting the full guide here, first the text because that is a simple cut n paste job, images to follow soon:
Before we get down into the nitty-gritty of the guide itself you should familiarise yourself with our usual disclaimers at the beginning of this post. I say this not because we don't care if you have problems, it's just that our capacity to trouble shoot is limited, and you shouldn't have embarked on an adventure to Root your device unless you did your due diligence first and had some understanding of what you were up to. One final disclaimer weasel-word at the off: the CWM recovery ports for the N7 are still a little iffy at this stage and even when taking appropriate steps to make it permanent you may only be able to boot into it via a command prompt window. Expect updates once fixes are available.
Disclaimers out of the way, here are the things you will need:
A Nexus 7, fully charged
A windows PC (the guide may work on macs via Windows virtual environments, but that isn't confirmed by us and is outside the scope of this guide)
The appropriate Nexus 7 USB drivers, there are several ways to get these:
Preferred method - Go to this thread at XDA-Developers and download and install the Root Toolkit there, which has an automated drivers installation included (this is preferred because it is what the guide that follows is based on because the Toolkit is probably going to be the most straightforward for the majority to use, and even if it fails and they have to resort to using command prompts that is more easily done from the Toolkit). Many many thanks to WugFresh at XDA for producing such a noob-friendly Rooting application - please consider making a donation to him here.
Install the Android SDK from here. Please note if you are already an SDK user that the Google USB drivers in the SDK have updated with the release of the Nexus 7 and Jelly Bean and you should update your drivers from within the SDK itself
Install the universal drivers from this post at XDA-Developers, but please make note of how you will need to adjust fastboot commands if you are using these drivers
Go to this post at XDA-Developers and install the USB drivers from there if you have no luck whatsover with any of the other methods
OK, now that you've got the Root Toolkit let's proceed (if you plan to do this with the SDK and command prompts then you should be advanced enough to follow the guide here, I did the first time and if you've done this stuff before the process is trivial).
Open the Root Toolkit, at the prompt to select your device scroll down to the bottom and select the Nexus 7 and the version number that corresponds to the firmware installed on your Nexus 7 (you can find this out in Settings --> About tablet --> Android version)
You'll be greeted with a screen that looks like this:
Click on Initial Setup and use the automatic driver installation facility from here to install USB drivers, it will check that ADB and Fastboot commands are working before dropping you back to the install window.
Turn on USB Debugging in the Nexus 7 by navigating to Settings --> Developer options. Turn on Developer options using the toggle in the top right hand corner, and then turn on USB debugging
Connect your Nexus 7 to your computer with the micro USB cable that came in the box. At this point it is vital that your computer recognises the Nexus 7 as a connected device, you will know if it has because a Nexus 7 "AutoPlay" window should pop up and ask you what action you want to take. If it doesn't show up, pull down the notification tray and press on the notification that says "Connected as a media device". A new menu will open and select the "Camera (PTP)" option. You should now get the AutoPlay window.
Head back to the Toolkit, and select "Unlock" from here, be aware that this will wipe your device (you might want to take a backup if you've already installed a lot of stuff on the device, that's just a button click away also in the Toolkit)
This will boot the device up to a screen giving you the option to unlock the bootloader, with "Yes" selected hit the power button. You'll see some text in the top left corner telling you it is unlocking the device, and then you will see the red "Locked" text toward the bottom of the screen change to "Unlocked". Moments later the device will reboot, and because it will have been wiped you will need to either set it up again or just skip past set-up and get back to the homescreen.
Once you're back onto the home screen, connect as you did before and take the same steps to turn on USB debugging and get the AutoPlay prompt to appear. Then go back to the Toolkit and select the Root option with permanent CWM recovery. All things going well the process will be fully automated from here, it will check that ADB and Fastboot are working, push the SU and CWM files to the device, boot the Nexus 7 into it's bootloader, flash CWM recovery to the device, and then reboot with Root privileges and a fresh new recovery permanently installed.
...or so the theory goes. Using this method I get Root, but CWM recovery is only accessible via command prompt, and I see others having the same problem. So...
Accessing CWM recovery:
In the Root toolkit go to Advanced Utilities by launching it here:
On the next screen select Launch CMD Prompt:
Once the command prompt appears type: ADB reboot recovery - the phone will boot into CWM recovery for you, so you can do things like make Nandroid backups, install zip files and so forth
Installing the 4.1.1 update post-Root and installation of CWM recovery:
Install OTA Rootkeeper by Supercurio from the Play Store here
Open the app once installed and grant it SuperUser privileges
In the app select "Protect Root", and then "temp unroot" the device
Download a zip of the 4.1.1 update here.
Copy it to the internal SD of the Nexus 7
Access CWM recovery as per the instructions above. In this version of CWM recovery you will navigate the options with the volume keys and press the power button to select an option - do that to navigate to "Install zip from SD card" and press the home button
On the next screen go to down "Toggle signature verification" and toggle it until it says "disabled" at the bottom of the screen (it should be set to default to disabled, but you lose like 5s making sure)
Go up to install zip, navigate to the zip file you downloaded in step one and install it
When the device reboots go to OTA Rootkeeper and restore Root, viola! You're done!
So, after all is said and done you should have a Rooted Nexus 7, running the 4.1.1 update, and with a custom recovery that can only be accessed via command prompt. Don't forget to shout WugFresh, the Toolkits developer, a coffee - make a donation here.
Would be nice if you posted that guide on this forum too.
Thanks for the guide.
Oooohh pictures
Caliyork said:
Oooohh pictures
Click to expand...
Click to collapse
You know, for the totally acopic
Will this work on the new Build number JRO03D? Or should I wait until he updates the toolkit?
Dillon610 said:
Will this work on the new Build number JRO03D? Or should I wait until he updates the toolkit?
Click to expand...
Click to collapse
No idea. You can simply downgrade to an older stock image using his Toolkit though and then follow the same process used in the guide to update to the latest build.
"Meh" at requirement #2:
A windows PC
Click to expand...
Click to collapse
I haven't ran Windows for years. I hope there's a way to do this with Linux (assuming a computer is even needed?)
I remember rooting my Optimus T with Z4 root... one click, bingo bango, done.
JaSauders said:
"Meh" at requirement #2:
I haven't ran Windows for years. I hope there's a way to do this with Linux (assuming a computer is even needed?)
I remember rooting my Optimus T with Z4 root... one click, bingo bango, done.
Click to expand...
Click to collapse
"Windblows"
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
mario24601 said:
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
Click to expand...
Click to collapse
There's a wiki on cyanogenmod.com that explains root.
mario24601 said:
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
Click to expand...
Click to collapse
Should be doable on mac in a windows virtual environment, which seems to be how most mac users are doing things here at XDA.
Actually looking for someone to write "for mac" guides, if anyone is up for that!
HTC Incredible S Rooting Guide
What we will do?
1. Install HTC Sync
2. Downgrade the HBOOT to 1.13
3. Create a GoldCard
4. Run the RUU update
5. S-OFF through Revolutionary
6. Gain root access using SuperUser
7. Install custom rom (Lacoste Mod V5)
What we need?
1. HTC Incredible S
2. MicroSD card (2GB, 4GB, 8GB)
3. USB Cable
4. Windows PC (XP, 7, 8)
5. HTC Sync
6. Downgrade
7. Goldcard
8. RUU
9. Revolutionary w/ BETA Key
10. SuperUser
11. Custom Rom (Lacoste Mod V5 is the best and has the least bug from all the custom rom I have tried, it has a
working camera, video playback, youtube, fast performance, latest 3.0 kernel, volume wake,
included Sweep2Wake to use the capacitive buttons to wake the phone.)
Notes:
1. BACKUP any data on your phone that is very important
2. It's best to factory reset your phone and format your SD card to ensure 99.9% success.
3. Don't attempt to run any registry cleaner like CCleaner or ACS until we finished rooting your phone, OK?
4. This method worked flawlessly on my HTC Incredible S GB-2.3.5 Sense-3.0 HBOOT-2.00.0000, if your phone is
Gingerbread (not Froyo or ICS), Sense 3.0 and below, HBOOT 2.0 and above, then it should work... As I have
said, all HTC Incredible S that have upgraded to Ice Cream Sandwich must DOWNGRADE it first to Gingerbread
before continuing to this tutorial... Look on threads on XDA on how to downgrade your ICS phone.
Let's Start...
1. Make sure you have Admin account on your Windows PC or else we can't proceed. It is also advisable to use a
fully charged laptop (not a slow netbook or tablet) connected through a charger so if the power supply fails
while we're in the rooting process, your phone will not be bricked... And also use a fast performance PC or
laptop to avoid hanging ar freezing computer.
2. Install the HTC Sync included, Restart PC, Uninstall the "HTC Sync" ONLY on control panel and leave all other
drivers, and please don't attempt to run any registry cleaner like CCleaner or ACS unless we finished rooting
your phone, OK?
3. Place the folder "HTC Incredible S Rooting Guide" on Desktop for easy access.
4. Open this folder, open "2 - Downgrade" folder, click "runme.cmd"
5. Now it will ask question based on your phone
a. Do you have UNLOCKED ICS?
n - if you are not running the OFFICIAL ICS rom from HTC and has the stock gingerbread rom (2.3.5)
b. Do you have root?
n - if your device is stock and never been rooted before
c. Do you want to create goldcard?
y - best choice to avoid CUSTOM ID ERROR while running RUU
d. Do you unlocked on HTCDev?
y - IF THE MAIN-VERSION 2-3 steps above tells 2.00.000 (look on the output texts above the question!)
n - IF IT DOES NOT STATE 2.00.000 or if you have an unlocked bootloader from HTCDev.
6. You may receive this error during the script operation "rm failed for /data/data/recovery/log, No such file or directory"
This error can be disregarded. NOTE: If your device shows HTC with red triangle!, press VOL+,VOL-,POWER at the same time
and choose reboot, then run the runme.cmd again...
7. Read the script and make sure there is no error, if it has, close the cmd and click "runme.cmd" again...
8. NOTE: if the script write to many "The file specified was not found," disconnect the phone and connect it
again and click "runme.cmd" again...until you succeed. If it still shows "The file specified was not found"
disconnect, restart pc and phone, and follow again the procedure.
9. If all run successfully without error, proceed with the RUU.
10. This stage is very CRITICAL, if the RUU update proceeds, do not attempt to remove the usb of turn off the PC
or else you will brick your device.
11. Click "RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199308_signed.exe"
12. Next, Next, Next...
13. If it shows CUSTOM ID ERROR, you need to create a goldcard because the downgrade kit might not succeded in
creating goldcard in step 5. Search threads on xda on how to
14. If it seems to proceed without error, do not attempt to remove the usb of turn off the PC
or else you will brick your device. Close any open application on your PC to ensure it won't hang...
15. The RUU will run less than 10 minutes, if it's 20 minutes or so, there might be a problem (slow pc, faulty usb cord, etc)
16. When its finished running, you can verify if you have 1.13.0000 hboot by entering hboot (power on phone + vol down).
17. Then you can run revolutionary to get your s-off. FIRST, press windows + R, type cmd. Open the "Revolutionay folder"
click the address bar and copy. NEXT, on the cmd, type "cd(space here) then right-click paste. NEXT, type revolutionary.exe ENTER NOW!!!
input the beta key and wait...Download recovery? y- if you have internet...
18. Power OFF, press power + vol down, and see if it says
****Revolutionary****
S-OFF
6.13
19. Reboot, connect your device through mass storage. Copy the files "Superuser-3.0.7-efghi-signed",
"Lacoste_ModV5Incredible S_03.05", and "gapps-jb-20121212-signed" on the root of your SD card (not on any folder, just on the card itself)
20. Power OFF, press power + vol down, now go into RECOVERY, Install zip on SD card and choose "Superuser-3.0.7-efghi-signed". Wait. Choose Reboot Now...
21. Power OFF, press power + vol down, now go into RECOVERY, Install zip on SD card and choose "Lacoste_ModV5Incredible S_03.05". Wait. Choose Reboot Now...
22. Now it will load for less than 5 minutes, it it stays into a bootloop for more than 10 minutes, power it off by pressing the power button for 10 seconds or
remove the battery. Press power + vol down, now go into RECOVERY, Install zip on SD card and choose "Lacoste_ModV5Incredible S_03.05". Wait. Choose Reboot Now...
It should work now...
23. After it successfully booted into the homescreen, reboot the phone twice to ensure that the Home button will still work before flashing the Google Apps because it is a bug.
Google Apps will install some Google applications like a working Play Store and Google Now (like Siri on iPhone).
24. Power OFF, press power + vol down, now go into RECOVERY, Install zip on SD card and choose "gapps-jb-20121212-signed". Wait. Choose Reboot Now...
25. Now, everything should work fine. You are now using a Jelly Bean rom and can install limited apps to Gingerbread before like Google Chrome, Google Keep,etc.
It is advisable to download these apps available only on rooted phones
Cerberus - the best anti-theft app
Game Killer - cheating games
Lucky Patcher - removing license verification and Google adds on applications.
Root Explorer - remove the old chinese app using titanium backup and replace with the official RE app.
SetCPU - overclock your phone up to 1.2 Ghz-1.3 Ghz only to avoid overheating and battery drain.
Startup Manager - remove uneccesary startup, enable all system apps to ensure a working phone.
Sweep2Wake - included, use the capacitive buttons to wake the phone.
Titanium Backup - Freeze bloatwares, uninstall system apps.
CONGRATS!!!
Now you have a rooted device, I hope you enjoy my tutorial and don't hesitate to donate to my
account because I have spend so much time writing this tutorial and I would really appreciate it.
You can email me at [email protected] so I can give you my PayPal account or answer some of
your questions...
Nickson T. Delos Reyes
Bulacan, Philippines
Download Links:
Step 1: HTC SYNC
https://support.htc.com/alerts_downloads/en/HTC_Sync_and_Sync_Manager_for_all_HTC_Android_Phones
Step 2 & 6: Downgrade & Superuser
https://docs.google.com/file/d/0BzrqDB9vYL_INWQwV2pBZXNMWk0/edit?usp=sharing
Step 3: GoldCard
http://forum.xda-developers.com/showthread.php?t=1104226
Step 4: RUU
http://www.filefactory.com/file/cc2...5AU_3805.06.03.03_M_release_199308_signed.exe
Step 5: Revolutionary
http://revolutionary.io/
Step 7
Lacoste Mod v5
https://disk.yandex.com/public/?hash=74/d7BSt63CXtgBUQAdRqwB1qRJL8QH6hwV+IIvtpU8=
Google Apps
http://d-h.st/Zam
******************************************************************
Tutorial Videos
Part 1
http://www.youtube.com/watch?v=PbwE6pXOdco&feature=youtu.be
Part 2
http://www.youtube.com/watch?v=alSEpJMJrjo
No way that Lacoste is the best rom out there. Maybe for you, but not for all.
Very well done, I see much work here, but why another one for a almost legacy device?
Sent from my HTC Incredible S using xda app-developers app
? confused
revolutionary.io
seems to be gone?