Database Develop

[TOOLKIT] GALAXY NOTE 8.0, Drivers, Backup, Root, Recovery, Flash + MORE

[TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY NOTE 8.0 [2012 MODEL] - Drivers, Root, Recovery + MORE
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports a multitude of Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
SUPPORTED MODELS
GT-N5100 3G/WIFI MODEL
GT-N5110 WIFI ONLY MODEL
GT-N5120 LTE MODEL
Click to expand...
Click to collapse
FUNCTIONS OF UNIFIED ANDROID TOOLKIT V1.3.3 [8TH DEC 2014]
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn't corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: As the exe files are not Digitally Signed with a Microsoft Certificate they 'may' get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.
Credits: ChainsDD for Superuser, Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE YOUR DEVICE. NOTHING IS RESTRICTED.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR 'AUTO UPDATES' DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE 'QUICK PICKS' SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE "ANY BUILD" OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD (USEFUL IF YOUR BUILD IS NOT LISTED).
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
Enable Developer options for usb debugging
Go to Settings, System section, About device and tap on 'Build number' 7 times until it says you are now a developer. You can now go to Settings, System section, Developer options and enable USB debug.
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the device.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the device.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.

**FAQ**
Q. Help me I can't find my build in the Model Selection Screen
The Toolkit includes a selection of Insecure Boot Images to cover all the different builds available. As there are very many different builds it is impossible to include an image for every single build but some builds share the same Boot Image. If you have a build that isnt listed on the Model Selection Screen you can therefore use a similar build. The best way to go is up to the next available build as it should offer more compatibility with the build you are using but if that isn't available then try the next build below your one as it should still be almost identical as long as it is the same version (ie. 4.1.2).
The Model Selection Screen is there so that if a task in the ToolKit requires an insecure kernel [to perform adb root commands] and your phone doesnt already include one, a compatible boot image [with an insecure kernel included] can be flashed to provide adb root access.
If you have a Custom Rom flashed to your phone then it will most probably have an insecure kernel included so it doesn't really matter if your build is not listed on the Model Selection Screen and when asked [by certain functions] if you have an insecure kernel on your phone you can answer 'yes'. However if the function fails then your kernel may not be insecure in which case you can flash one from the ToolKit. If you need to do this make sure the right build [or closest available build] is set so you flash the right image for your phone.
----------------------------------------------------------------------------
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF like removing system apps.
----------------------------------------------------------------------------
Q. Why do I need to back up my IMEI/EFS and how do I do it?
There well protected section of your device that is virtually immune to any kind of flashing and manipulation (unless of course you know how to access it). This part of the device contains information such as IMEI (or MEID and ESN in the case of CDMA devices), programming parameters for the device such as your account information (phone number, etc), data provisioning parameters, and a whole bunch of other things that, when not handled properly, can render a device completely useless. All of these are contained in the infamous \EFS folder. If anything messes with your EFS folder, unlike flashing a device (which could potentially lead to bricks as well) it could render your device completely useless as it will no longer be recognized by your carrier. If you are not planning on flashing anything to your device and want to stay on pure Stock then you may never have any problems but it is still advisable to backup this information just in case (better to be safe than sorry).
This feature will be added to the Toolkit after testing has been completed.
----------------------------------------------------------------------------
Q. Does flashing a custom image increase my flash counter?
Any image that is flashed via Odin that has been modified will increase the flash counter that can be viewed in the Download Mode on your device (if booted by holding the Volume Down, Home and Power buttons). You can reset the flash counter using an app by Chainfire called Triangles Away and can find instructions on how to use that in the Downloads section in the Toolkit.
----------------------------------------------------------------------------
Q. Will flashing Stock ROM via odin using the toolkit replace everything that was flashed before? recovery? etc?
Yes a Stock Image flashed via Odin will replace all your key partitions (boot, recovery, system) with the stock firmware. If you want to reset the phone back to an 'out of the box' state then you want to enter recovery and do a wipe first which will reformat your userdata partition.
----------------------------------------------------------------------------
Q. I flashed Custom Recovery but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery it will NOT be overwritten after a reboot. You can also do this via the Toolkit.
----------------------------------------------------------------------------
Q. My AntiVirus program says the Toolkit files may be harmful
The exe compiled files are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) may pick it up as potentially harmful when it is not. They will pick up ANY file that doesn't contain a purchased Microsoft certificate in the same way. Just Restore the deleted file and exclude it from further scans and it will be fine. Or switch to a better AntiVirus program such as BitDefender.
----------------------------------------------------------------------------
Q. I flashed the Toolkit Boot Image, now my wifi + bluetooth won't work
The boot images are made from Stock with only needed changes made to the insecure boot images [modified adbd, default.prop and rc.local edited] and will work on all stock roms. If you flash them to a custom rom and the rom has been altered or uses a custom boot image then it will boot but certain modules may not load such as wifi or bluetooth. In this case you can use the boot image to root or perform adb root functions but will need to flash back the boot image for the custom rom to get other functions working again. This is not a fault of the Toolkit but a difference to stock in the custom rom.
----------------------------------------------------------------------------
Q. I am having trouble getting adb working with the drivers installed
Try switching your connection type from media (MTP) mode to camera mode (P2P). To do this open the notification area, click where it says connected as and change from MTP to PTP.
----------------------------------------------------------------------------
Q. I want to send my device back for warranty purposes
1. Follow the instructions to reset your flash counter with TriangleAway.
2. Download and flash a Stock Firmware image from the download section.
3. Boot into Stock Recovery and perform a wipe/factory reset
.
Your internal storage will be formatted and data and cache wiped. Your device should now be back to an out-of-the-box FULLY STOCK state with the flash counter [shown if you boot to download mode manually] reset and ready to send back.
----------------------------------------------------------------------------
Q. When connecting the phone I get 'USB Device not Recognized' and no serial number shows in the ToolKit
I actually had this problem recently and what fixed it for me was to make sure that the drivers have been installed, then shut my phone down plug the usb cable in and restart it. The phone booted up and the device was recognized and drivers installed correctly. May not work for everyone but worth trying.

*reserved if needed*

Mskip
thanks for this
is your version of cwm working properly?
thanks

jocko6872 said:
Mskip
thanks for this
is your version of cwm working properly?
thanks
Click to expand...
Click to collapse
I think that's for us us to test and tell him

sefrcoko said:
I think that's for us us to test and tell him
Click to expand...
Click to collapse
It's the same version as provided in the development thread.

i flashed the cwm
but cant do anything
cant even reboot

jocko6872 said:
Mskip
thanks for this
is your version of cwm working properly?
thanks
Click to expand...
Click to collapse
CWM is the experimental port from emwno in *THIS* thread.
I need people to test if the insecure boot image flashes and whether the root process works.
Mark.

madsatan said:
i flashed the cwm
but cant do anything
cant even reboot
Click to expand...
Click to collapse
Flashing custom recovery shouldnt affect the boot process have you tried just holding the power button for about 15 seconds to force a hard reboot?
Are there any lights or anything on the screen?
Mark.

Sorry that i didnt make myself clear
What i was saying is that i boot into cwm
Cant press any fuctions (cant back up or reboot etc)
I had to use power buttom to restar the tablet
Sent from my GT-N5110 using XDA Premium HD app

madsatan said:
Sorry that i didnt make myself clear
What i was saying is that i boot into cwm
Cant press any fuctions (cant back up or reboot etc)
I had to use power buttom to restar the tablet
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
As stated the cwm port is still experimental but it is being worked on by emwno and im sure he will get there.
Has anyone tried the root procedure yet with the insecure boot image? I really need some feedback here.
Mark.

Hey mskip,i just downloaded the toolkit and went through the insecure kernel process with no problems,tho i had already rooted using the Framaroot app. I also installed cwm and booted into it,although it's a little buggy it's useable ,just need something to flash in it now

ktmman said:
Hey mskip,i just downloaded the toolkit and went through the insecure kernel process with no problems,tho i had already rooted using the Framaroot app. I also installed cwm and booted into it,although it's a little buggy it's useable ,just need something to flash in it now
Click to expand...
Click to collapse
Glad its all working ok. Did you go through the ALL-IN-ONE process? Just wondering if you had installed busybox as I need someone to make a NAND backup from the backups section. If you can do that and then post a screenshot of the files (filenames and file sizes) then I can update it to a public version
Mark.

mskip said:
Glad its all working ok. Did you go through the ALL-IN-ONE process? Just wondering if you had installed busybox as I need someone to make a NAND backup from the backups section. If you can do that and then post a screenshot of the files (filenames and file sizes) then I can update it to a public version
Mark.
Click to expand...
Click to collapse
ok,i downloaded Busybox from the market,it looks like its going well,here's the data.

ktmman said:
ok,i downloaded Busybox from the market,it looks like its going well,here's the data.
Click to expand...
Click to collapse
Looks good
Now I just need someone with a full stock firmware flashed that can test the ALL IN ONE process and perform a NAND backup to make sure it works from scratch. Any takers?
Mark.

I will try once I'm home
Sent from my GT-N5110 using Tapatalk HD

n5120
got n5120, lte. can I use tools or I have to wait for n5120 version?
thanx in advance for answer.

goo.im seems to be down. Got a mirror?

thanks mskip
i use your nexus 4 tool kit a lot and was excited to see this one
i had already rooted via the framaroot app. was able to successfully load up CWM recovery (although it needs some help but i see in the other thread its being worked on).
also ran a backup successfully.

Sardo Numspa said:
thanks mskip
i use your nexus 4 tool kit a lot and was excited to see this one
i had already rooted via the framaroot app. was able to successfully load up CWM recovery (although it needs some help but i see in the other thread its being worked on).
also ran a backup successfully.
Click to expand...
Click to collapse
Flash Experimental #4 for your specific device (from my thread). Its working properly now.

MiX Pack for the simple user (TWRP AdAway SuperSU)

Hi all,
Here you may find a zip containing some very basic resources which can be found elsewhere without too much effort however I figured I would make things that slightest bit easier for some who use any of the MIUI 9+ builds.
The following zip file includes the latest custom SuperSU for MIUI Oreo, the latest release of TWRP, the latest release of AdAway.apk and for the hell of it, the stock MIX boot animation if you wish to use it on any other ROM. 20/5/18
https://www.dropbox.com/s/29u1z721blc1mdy/MIX Package.zip?dl=0
You can find guides elsewhere which go much more in-depth but I'll make a quick one for those who have unlocked bootloaders and are wanting to use any of the builds located on the official MIUI site: http://en.miui.com/download-334.html
The following are the steps I take for my usual installation;
1. Download chosen Official Developer or Stable ROM from the site above in FASTBOOT version. (Click "flashing guide", then "fastboot update" on the left menu where you will find all Xiaomi models, select either "latest global stable" or "latest global developer")
2. Extract ROM folder from download (example: chiron_global_images_8.4.19_20180419.0000.00_8.0_global) to C drive root.
3. Make sure fastboot drivers are installed and device can be seen by PC then download: https://xiaomiflashtool.com/
4. Connect your phone, load up the tool and click "select" on the top left. Here you will locate the ROM folder on C drive.
5. Click "refresh", if your phone is discovered then click "CLEAN ALL" at the bottom to prevent re-locking your bootloader followed by "flash" on the top right hand side which will initiate a full wipe of your phone followed by the installation of your ROM.
When complete allow phone to boot completely and then power it off. Continue below for root instructions.
6. Extract contents of MIX Package to your desktop and open CMD: Hold shift and right click your desktop, click "open powershell window here". Once powershell is loaded, type "cmd" and hit enter. When ready for step 7, boot your phone to fastboot mode.
7. You can either install TWRP or single-boot to it which will allow you to use it one time before reverting to stock recovery upon next reboot. For install, type "fastboot flash recovery recovery.img" and hit enter, then type "fastboot boot recovery.img" to boot to recovery. For single-boot TWRP type "fastboot boot recovery.img" which will boot into the img and allow any desired flashing without installing TWRP to your phone.
8. You are now in TWRP and should have storage access to your phone via your PC, copy SuperSU (and AdAway if desired) to your phone storage.
9. Hit "Install" in TWRP and select SuperSU zip file then flash. Once complete you may now boot your phone and progress through the first time setup.
10. Congratulations, you now have a completely fresh, clean rooted version of your desired MIUI. If you wish to enable full-system ad blocking, proceed to your file manager and install the AdAway.apk then follow instructions in-app.
As mentioned, this is not particularly a replacement for any other guide already published for the Mi Mix 2, it is the guide which I follow for all of my installations which gives me the cleanest possible MIUI. If you are using a stable release ROM and need to pass safety net then I suggest you use substitute SuperSU for Magisk however all the developer ROMs are unable to pass safety net anyway and I much prefer using SuperSU as it has never failed me and has the ability to hide the icon completely from launcher.
Kaji.

Link doesnt work

masterismos said:
Link doesnt work
Click to expand...
Click to collapse
Will upload dropbox version.
Edit: Done.

Nice guide. Quite simple enough. Thank you for this

namasteji1 said:
Nice guide. Quite simple enough. Thank you for this
Click to expand...
Click to collapse
Thanks man, first ever guide...I thought I'd give it a go.
New stable release V9.5.8.0 available now everyone! Download here today: http://en.miui.com/download-334.html
Changelog:
System
· Fix - Errors occurred when the device connected to a saved Wi-Fi hotspot (05-10)
· Fix - Device rebooted automatically in some cases (05-10)
· Fix - Caller ID errors (05-10)
· Fix - Notification settings weren't applied for dual apps (05-10)
· Fix - Search bar in the Notification shade didn't respond (05-10)
· Fix - The problem of abnormal charging needs to be restarted once it is upgraded to the corresponding version. (05-11)
Mi Drop
· Fix - Couldn't open Mi Drop in some cases (05-10)

SM-T295 - Finally rooted tablet!! (updated 19-March-2021)

I have root on my SM-T295 A8 tablet!!
See my new post: How to Install TWRP and Root T295
Update 19 March 2021
Tested on T295XXU3BUC3 ROM
Prerequisites:
Bootloader unlocked - search forums.xda-developers for instructions how to do this.
OEM unlock on. In Settings/developer options, OEM Unlock slider should be to the right.
I see people still trying to patch files to get root.
If you flash the TWRP posted by @Talich52, with reboot unchecked you can install Magisk from TWRP.
1. If prerequisites met: install Android 9 bootloader through ODIN
2. Reboot to system
3. Go into download mode.
4. Open ODIN and in the AP slot put TWRP (see attachment below)
5. Uncheck auto reboot
6. Flash TWRP
7. Press vol dn + pwr keys.
8: When screen goes blank, press vol up + pwr keys.
9. Keep holding down both keys after reboot.
10. Tablet will reboot again.
11. When Samsung logo appears stop pressing pwr key.
12. When bootloader msg appears, release vol up key, quickly press & release pwr key, and quickly press vol up key until in TWRP.
13. You will then format (NOT WIPE) data. Answer yes to the format prompt
14. Clear dalvik/cache if prompted
15. Install Fix_vendor_9.0.zip or Fix_vendor_10.0.zip. See attached files.
16. Clear dalvik and cache.
17. Reboot back into recovery.
18. Install magisk - see attached
19. Reboot into system. May reboot again - that's okay
20. Enjoy!!
Updated (23 March 2020) my Tab A with XXS3ATB2 and got it rooted!!
Attached AP.tar file is for XXU2ASL3 only.
T295-Magisk-AP.tar
Okay, after multiple failed attempts, I read about a method to root my T295. It did not work!! But, I decided to just use Magisk Manager on the boot.img file only. The resultant file would not flash - it will fail. The original boot.img & recovery.img files are 65,536K bytes each. I had to take the Magisk modified boot.img and overlay it onto the original boot.ing file. I did the same for the recovery.img. Then the files would flash successfully. The first thing after booting was to check Magisk Manager. It showed I have Magisk 20.3 installed. So, I tested this with Root Explorer. I did have root!!
If you are going to try this, you need to unlock your boot loader, I think. I have not tried this with a locked bootloader.
Basic instructions
PLEASE READ ALL OF THIS BEFORE STARTING!! VERY IMPORTANT!!
Here are the steps to root your tablet:
Make a backup of you apps & data before doing this. This procedure will
wipe all you data.
Go to settings.
Select software info
Tap build number 7 times to get into developer mode
Go back to main settings page.
Scroll to bottom and select developer mode
In middle of page find OEM unlocking
Make sure slider is all the way to the right (should say allow bootloader to be unlocked)
Unlock bootloader:
1. turn off tablet
2. press and hold down vol up & vol down keys together
3. insert usb cable (should already be connected to computer)
4. when bootloader screen appears, release all keys
5. press and hold vol up key for 5 seconds, then release
6. read instructions on screen to unlock bootloader (this will wipe all your data)
After reboot, go through normal setup.
Now for the hard part.
You need to download the complete ROM you have installed on your Tablet.
It will be better if you have the same ROM version as I do in post in this post (#1).
You need to unzip the ROM so you can flash it in ODIN.
If you are on the same ROM version as in my post #1, then you can just download my rooted files.
Unzip my downloaded root files zip file.
Unzip the downloaded ROM files.
In the AP* file, you need to replace my files in the zip: boot.img, recovery.img & vbmeta.img
Start ODIN. Select files for BL*, AP*, CSC* & CP*
For CSC file, select HOME_CSC*
*** Uncheck auto reboot ***
Flash ROM.
After flashing ROM. press vol dn + pwr key
As soon as screen goes blank press vol up key and hold
When get into recovery, select data wipe, then reboot
Set up phone as you normally would.
After setup, go to Play store and install Magisk Manager. Run Magisk Manager to see if you have root.
Do It Yourself Instructions
You need to do some research before doing this. This is NOT a walk you by the hand tutorial. You need to learn some things before following these instructions. Learn how to use lz4.exe. Learn how to use simg2img. Learn how to make a .tar file.
Make a backup of you apps & data before doing this. This procedure will
wipe all you data.
Go to settings.
Select software info
Tap build number 7 times to get into developer mode
Go back to main settings page.
Scroll to bottom and select developer mode
In middle of page find OEM unlocking
Make sure slider is all the way to the right (should say allow bootloader to be unlocked)
Unlock bootloader:
1. turn off tablet
2. press and hold down vol up & vol down keys together
3. insert usb cable (should already be connected to computer)
4. when bootloader screen appears, release all keys
5. press and hold vol up key for 5 seconds, then release
6. read instructions on screen to unlock bootloader (this will wipe all your data)
After reboot, go through normal setup.
Now for the hard part.
You need to download the complete ROM you have installed on your Tablet.
Extract ROM files
Extract system.*.lz4, recovery*.lz4 and vbmeta*.lz4
Use tar to make an AP.tar file with the 3 above files. **Search the Internet if you do not know how to use tar.
Copy the AP.tar file to your phone. It is better to use adb push to prevent file correuption.
Install Magisk Manager from Play store.
Run Magisk Manager. Select install Magisk. Choose Select and Patch a file. Follow directions on screen to patch the AP.tar file.
Once the AP.tar file has been patched, use adb to pul the file to yur computer.
Extract the file from the AP.tar file.
Now come the hard part:
You cannot edit .lz4 directly. You have to decompress them. After decompressing system*, use simg2img to decompress the sparse file. Search the Internet if you do not know how to do this.
Now we make our modified files so they will flash in ODIN.
Instructions:
I used hex editor neo - a windows 10 app
I opened the stock kernel & recovery files in hex editor neo
I opened the Magisk modified kernel & recovery files in hex editor neo
I copied the modified kernel & recovery code onto their respective stock files in hex editor neo
I saved the stock files & closed hex editor neo.
I used cygwin to create a tar file: boot.img, recovery.img, vbmeta.img plus other files in original AP*.MD5 file.
You should also flash all ROM *.MD5 files (BL, CP, CSC) per Magisk instructions.
New AP.tar contents:
boot.img
dtbo.img.lz4
meta-data
recovery.img
system.img.ext4.lz4
userdata.img.ext4.lz4
vbmeta.img
vendor.img.ext4.lz4
I used Odin to flash the tar file
Flash ROM.
After flashing ROM. press vol dn + pwr key
As soon as screen goes blank press vol up key and hold
When get into recovery, select data wipe, then reboot
Set up phone as you normally would.
After setup, go to Play store and install Magisk Manager. Run Magisk Manager to see if you have root.
After installing Magisk:
(Powering up normally) → (System with NO Magisk)
(OEM Recovery Key Combo) → (Splash screen) → (Release all buttons) → (System with Magisk)
(OEM Recovery Key Combo) → (Splash screen) → (Keep pressing volume up) → (Actual recovery)
Please follow my instructions and the install instructions from Magisk web page.
Magisk Installation

What system do you use to manipulate the files? (Windows? Linux? Android?)
What is "overlay"? Do you extract the boot.img from the original AP.tar.md5, and from the magisk-patched.tar, copy the magisk-patched-boot.img to the beginning of the original-boot.img, and then replace the boot.img in magisk-patched.tar?
Do you give Odin four files, or just AP? Do you use CSC or HOME_CSC?

J.Michael said:
What system do you use to manipulate the files? (Windows? Linux? Android?)
What is "overlay"? Do you extract the boot.img from the original AP.tar.md5, and from the magisk-patched.tar, copy the magisk-patched-boot.img to the beginning of the original-boot.img, and then replace the boot.img in magisk-patched.tar?
Do you give Odin four files, or just AP? Do you use CSC or HOME_CSC?
Click to expand...
Click to collapse
In answer to your question, basically, yes.
I only flash the 3 files in the .tar file
I am on a Windows 10 laptop. Only 3 files need to be modified by Magisk: boot.img, recovery.img, vbmeta.img
I use Hex Editor Neo for overlaying the modified kernel and recovery files..
At the end of these 2 stock files is code that needs to be there, thus the 65 MB file size.
So I open the stock .img files (boot, recovery) in Hex Editor Neo, and copy the modded boot, recovery code into each stock .img file..
I use cygwin to create the .tar file, then flash with ODIN 3.1.14

Where does this leave you with respect to booting? Do you have to hold down buttons like you're trying to boot to recovery, then let go at the right time, to boot with Magisk active? Have you booted "normally" since you installed Magisk? Is Magisk still active? Have you shut down completely and then rebooted?
Wu's writeup says, when he's patching an AP file, to install to recovery, the boot.img is patched to "remove the signature of the image to prevent soft bricks". He doesn't explain why the signature would cause a soft brick with an unlocked bootloader and a nulled-out vbmeta. If you're restoring the original signature, it seems like you're flirting with the situation he was trying to avoid.
Will you be posting in the main Magisk thread. Aside from the news of another success, the details of your solution might help Wu improve the automatic patching enough to make manual adjustments unnecessary.

J.Michael said:
Where does this leave you with respect to booting? Do you have to hold down buttons like you're trying to boot to recovery, then let go at the right time, to boot with Magisk active? Have you booted "normally" since you installed Magisk? Is Magisk still active? Have you shut down completely and then rebooted?
Wu's writeup says, when he's patching an AP file, to install to recovery, the boot.img is patched to "remove the signature of the image to prevent soft bricks". He doesn't explain why the signature would cause a soft brick with an unlocked bootloader and a nulled-out vbmeta. If you're restoring the original signature, it seems like you're flirting with the situation he was trying to avoid.
Will you be posting in the main Magisk thread. Aside from the news of another success, the details of your solution might help Wu improve the automatic patching enough to make manual adjustments unnecessary.
Click to expand...
Click to collapse
No keypress is required for booting to maintain root.
I have tried this multiple ways: shutdown/boot & reboot - still have root.
I have not posted in main Magisk thread yet. Can you give me a link to the main thread where I can post this information?

https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
This is the General Discussion thread. I've seen references to github for reporting bugs. github might be a better bet for providing technical information about how patching should be implemented.

J.Michael said:
https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
This is the General Discussion thread. I've seen references to github for reporting bugs. github might be a better bet for providing technical information about how patching should be implemented.
Click to expand...
Click to collapse
Thanks for the link. I have posted to the Magisk forum.

Well, besides the possible outcomes, I tried the method and it worked for me. I'm not loosing magisk between boots too, not touching system apps but I can install modules and get root.
So, thank you very much for the finding!

Gartrax said:
Well, besides the possible outcomes, I tried the method and it worked for me. I'm not loosing magisk between boots too, not touching system apps but I can install modules and get root.
So, thank you very much for the finding!
Click to expand...
Click to collapse
You're welcome. Enjoy your Tab A now that you have root.

gcrutchr said:
I have root on my SM-T295 A8 tablet!!
Attached boot.tar file is for XXU2ASL3 only.
T295-Magisk-AP.tar
Okay, after multiple failed attempts, I read about a method to root my T295. It did not work!! But, I decided to just use Magisk Manager on the boot.img file only. The resultant file would not flash - it will fail. The original boot.img & recovery.img files are 65,536K bytes each. I had to take the Magisk modified boot.img and overlay it onto the original boot.ing file. I did the same for the recovery.img. Then the files would flash successfully. The first thing after booting was to check Magisk Manager. It showed I have Magisk 20.3 installed. So, I tested this with Root Explorer. I did have root!!
If you are going to try this, you need to unlock your boot loader, I think. I have not tried this with a locked bootloader.
Click to expand...
Click to collapse
You must have a unlocked bootloader to proceed. How did you overlay the files?

secretwolf98 said:
You must have a unlocked bootloader to proceed. How did you overlay the files?
Click to expand...
Click to collapse
Instructions moved to Post #1

In unlocking the bootloader, does it have any negative side? I remember on my sasung s5 before that i would loose what they call knox and not be able to restore permanently. How abiut in the 2019 tab?

amnher said:
In unlocking the bootloader, does it have any negative side? I remember on my sasung s5 before that i would loose what they call knox and not be able to restore permanently. How abiut in the 2019 tab?
Click to expand...
Click to collapse
Probably the same situation. I do not care about knox. I do not care about Samsun Pay.
I have not tested anything to restore knox.

gcrutchr said:
Probably the same situation. I do not care about knox. I do not care about Samsun Pay.
I have not tested anything to restore knox.
Click to expand...
Click to collapse
Attempting to restore Knox would be a waste of time because it is impossible. When you think of Knox, think of the manufacture warranty. Once you void the warranty, it's a goner.

secretwolf98 said:
Attempting to restore Knox would be a waste of time because it is impossible. When you think of Knox, think of the manufacture warranty. Once you void the warranty, it's a goner.
Click to expand...
Click to collapse
My understanding is knox is not installed on the T295

gcrutchr said:
My understanding is knox is not installed on the T295
Click to expand...
Click to collapse
According to the off site, the tablet has a Knox
Some user use the file from #1 and have this error(about security)
only official released binaries are allowed to be flashed after reboot

gcrutchr said:
My understanding is knox is not installed on the T295
Click to expand...
Click to collapse
The T29x and T51x has knox.

secretwolf98 said:
The T29x and T51x has knox.
Click to expand...
Click to collapse
Yea...just checked in priv-app folder.
I read somewhere the T29x series did not have knox...must have read wrong...ha, ha

And what we have?
How I can solve the problem with "Only official released binaries are allowed to be flashed"?

Alloc777 said:
And what we have?
How I can solve the problem with "Only official released binaries are allowed to be flashed"?
Click to expand...
Click to collapse
Did you unlock bootloader?
Did you toggle OEM unlock in settings/developer options?

Alternative method magisk root [stock android 9][NO TWRP][Samsung A70 FN/DS]

purpose of this post is to share an alternative method for those who fail to root using @topjohnwu recommended method or the method posted by @Grarak here on A70 forum that involves patching recovery.img in magisk and then flashing that in twrp>install to boot.
failing to root means either bootloops or unstable magisk root or magisk root disappearing randomly or after a module installation.
this is not my original guide , i was told this method by @raeumler via PM and i am sharing it on A70 forums incase other methods dont work.Some of the steps may not be neccesary , but i did them ritually anyway
my phone model is SM-A705FN /DS and firmware version is A705FNXXU5ASL4( with 1st jan 2020 updates) . country is PAK
do this at your own risk! i will not be responsible for any negative consequences
appropiate links and files will be posted as attachments
rooting procedure( read each step twice)
1- UNLOCKING BOOTLOODER= this will factory reset device . backup your data
read step 02 of this linked guide https://forum.xda-developers.com/galaxy-a70/development/recovery-twrp-galaxy-a70-t3955984
DOWNLOAD FIRMWARE AND ATTACHMENTS= now i am assuming you have stock samsung android 9. if not, download your firmware via SamFirm windows program and flash in odin to go to stock[ program available in attachements]. Download other attachements too
2-Find vbmeta.tar in downloaded attachments and unpack it. you will get vbmeta.img file.
3. unzip stock Samfirm downloaded firmware. you will get 5 files in it (BL,AP,CP,CSC and CSC_HOME).open the AP File from the factory rom with 7zip
4. remove userdata.img, vendor.img and system.img from the AP file
5. replace vbmeta.img with the one you have downloaded in step 2.
6. repack AP as AP.tar [ use 7zip or peazip. i used peazip windows program, ensure file type is TAR]. transfer this AP.tar to your phone
7. install magisk manager 7.5.1 on your phone and open it. connect your phone to internet.
8. hit the upper install button and choose "patch a file"
9. choose the repacked AP file and patch it[ this requires active internet as magisk needs to download its zip file]
10. copy the AP file which magisk creates in internal storage/download/magisk_patched.tar back to your pc (better keep it named as such for differentiation, its irrelevant how the file is named as long its a tar file)
11. download,unzip and open Odin 3.1.3.1[available in attachements]. i used Odin3+v3.13.1_3B_PatcheD.exe , there is a simple version too inside the zip
12. go into download mode on your phone (shut down completely then hold vol+ vol- togather and plug in cable connected to PC ). Odins should show Com port X as blue
13. in odin: put the BL, CP and HOME_CSC in its place (the files from the factory firmware you downloaded in step 1 from SamFirm windows program) and place the magisk patched AP on AP
16. check if you want autoreboot or not, its your own taste (some feel safer with autoreboot unchecked, both works)[ i kept autoreboot checked]
15. hit start and let it finish (when it stucks on something try another cable and install latest samsung adb driver.)
16. let the system reboot
17. if you get stuck in bootloop or freeze >10 min on samsung logo, try to force reboot.press volume down + power till screen turns blank then press volume + and power till bootloader unlock screen appears and then let go of all keys.
if still it doesnt boot, then press volume down and power togather to force shutdown and then press volume up and power till stock recovery boots up. Mine at this stage said firmware is corrupt ,factory reset needed so thats what i did in stock recovery. power off system in stock recovery and then press volume+ and power till bootloader warning screen , let go of all buttons, it should now boot up fine with magisk manager app in app drawer. DONT OPEN IT YET
download this app from play store https://play.google.com/store/apps/details?id=fr.petrus.tools.reboot&hl=en_US. open app and press reboot. No need to press any keys
on reboot complete ,connect to internet,open magisk, let it check for updates, it should say installed in both portions. magisk will do additional enviromental steps and then reboot. on booted up, use the linked reboot app to reboot again.
now magisk should be installed all fine
for viper4android>open magisk>swipe left and tap downloads> installed 2.7.1.6> reboot with linked app
on reboot check if app is installed, if not > install and login on xda labs and download viper4android 2.7.1.6> open app> give it root accesss> let it reboot device on installtion> on bootied up reboot again with linked app and then check drivers on viper4android[ make sure master switch is on and then play some music ,tap the chip icon to see driver status and processing status
from here onward, always use the linked reboot app to reboot device. if an app or module reboot device automatically( like viper4android does ) then on boot complete,reboot again with the linked app
Credits to @Grarak for his original work and files
 @raeumler for his guide.

Unfortunately, it doesn't work on Android 10.
There is an error in Odin when flashing files.
The error is when flash the AP file, more specifically vbmeta.

kac222 said:
Unfortunately, it doesn't work on Android 10.
There is an error in Odin when flashing files.
The error is when flash the AP file, more specifically vbmeta.
Click to expand...
Click to collapse
This is for stock android 9 as the title says.
Follow @MarvinMod guide to root android 10

Yes i know but i tried for yourself. I know how rooted on Android 10. Regards.
Wysłane z mojego SM-A705FN przy użyciu Tapatalka

Looks like a useful guide, thank you for putting it up. I'm really not sure how to get the firmware though from the SamFirm program. I found this ( https://androidmtk.com/use-samfirm-tool - might be useful info?) since I have never used the samfirm tool before I am lost at that step. I don't know if there's a list of region codes somewhere? I have an 'international version' A70. Using SM-A705MN, baseband version A705MNXXU3ASI1 .. Since I'm in the US, should I look to getting that type of ROM or should I find out what region this particular ROM already on the phone is, and use that?
I've done rooting before (Samsung S4, HTC M9, LG V20) but these phones seem even more complicated.
Even if all this works, then the root is not 'permanent'? I'm not sure why a different 'reboot app' would be needed if the system is modified in a way to enable things like magisk/super su?

DelphisDoofer said:
Looks like a useful guide, thank you for putting it up. I'm really not sure how to get the firmware though from the SamFirm program. I found this ( https://androidmtk.com/use-samfirm-tool - might be useful info?) since I have never used the samfirm tool before I am lost at that step. I don't know if there's a list of region codes somewhere? I have an 'international version' A70. Using SM-A705MN, baseband version A705MNXXU3ASI1 .. Since I'm in the US, should I look to getting that type of ROM or should I find out what region this particular ROM already on the phone is, and use that?
I've done rooting before (Samsung S4, HTC M9, LG V20) but these phones seem even more complicated.
Even if all this works, then the root is not 'permanent'? I'm not sure why a different 'reboot app' would be needed if the system is modified in a way to enable things like magisk/super su?
Click to expand...
Click to collapse
Download phone info app and note pda, csc and phone codes.
Use these codes to Google your exact firmware and download that ( you may have to visit various websites that offer better speed)
The samfirm, frija only allows latest firmware to be download, not the currently installed one.
One you have the stick firmware file, then you can proceed with rooting.
If you are on android 9 use this guide
If you are on Android 10 use MarvinMod guide.
This reboot app is what I currently use. Haven't experimented with other apps.
The root is permanent as long as your reboot with the mentioned key combination or the reboot app.
The reboot app simple allows you to reboot without the key combination. If you don't want to use this app then you must reboot with the mentioned key combination to retain root. Otherswise you wouldn't have root unless you reboot again with correct combination.
To make this easy I suggested that reboot app
Yes I feel you bro, I had Samsung note 2 then note 4 phone and they were easier to root.
But with Google changing things the best way to root is to use magisk and this complicated methods

i think you can make a little script for rebooting. should work. i really want to know how the bootpartition is corrected, at boot its recovery-from-boot.p as image and install-recovery.sh for reenabling stockrecovery. if you rename this files bootup should work without reflashing boot or recovery. there have to be something similar to the rebootprocess, a script that flashes a sparse image (the *.p file to delete su binary or something like that..) or it just kills the su binary in the folders itself. im to stupid for dmesg and logcat i couldnt find out whats going on at reboot. also the petrus reboot app reboots instant, keys doesnt. seems to be that adb reboot deletes root too. yesterday, somehow my fone did sonething last night, which crashes root again.....i need twrp urgent to make backup. but the binary let not decrypt it. U5 is android 10 bootloader and there are some issues with twrp (decrypt). last time it has saved my backuptry to /data/backupfolder as internal is encrypted. i dont want to factoryreset this phone....is it complicated to build a recovery ? or is there something like a clickitalltogetherapp?
---------- Post added at 09:46 AM ---------- Previous post was at 09:24 AM ----------
following reboot variants keeping root:
hold all keys for 10 seconds
reboot via terminal or script
petrus app
following kills root:
standartreboot with hw-keys
adb reboot (on a dosprompt from pc)
boot to stockrecovery
magisk module reboot
but thats is such a XXXX .. i dont have a word for it, in the beginning computers and so are working logical....seems that samsungs security trends are not that logical as needed... i hate samsung :/. there have to be someone who find the "unsu"-files...cannot be....

raeumler said:
i think you can make a little script for rebooting. should work. i really want to know how the bootpartition is corrected, at boot its recovery-from-boot.p as image and install-recovery.sh for reenabling stockrecovery. if you rename this files bootup should work without reflashing boot or recovery. there have to be something similar to the rebootprocess, a script that flashes a sparse image (the *.p file to delete su binary or something like that..) or it just kills the su binary in the folders itself. im to stupid for dmesg and logcat i couldnt find out whats going on at reboot. also the petrus reboot app reboots instant, keys doesnt. seems to be that adb reboot deletes root too. yesterday, somehow my fone did sonething last night, which crashes root again.....i need twrp urgent to make backup. but the binary let not decrypt it. U5 is android 10 bootloader and there are some issues with twrp (decrypt). last time it has saved my backuptry to /data/backupfolder as internal is encrypted. i dont want to factoryreset this phone....is it complicated to build a recovery ? or is there something like a clickitalltogetherapp?
---------- Post added at 09:46 AM ---------- Previous post was at 09:24 AM ----------
following reboot variants keeping root:
hold all keys for 10 seconds
reboot via terminal or script
petrus app
following kills root:
standartreboot with hw-keys
adb reboot (on a dosprompt from pc)
boot to stockrecovery
magisk module reboot
but thats is such a XXXX .. i dont have a word for it, in the beginning computers and so are working logical....seems that samsungs security trends are not that logical as needed... i hate samsung :/. there have to be someone who find the "unsu"-files...cannot be....
Click to expand...
Click to collapse
I didn't messed with boot or recuvery files like the way you DM me.
But I have been noticing strange behavior with petrus app.
Reboot option in petrus app is kinda of like fast reboot or reboot UI. Because all apps opened and present in task manager remain so after reboot with petrus app.
Also once you power off with petrus app,
1= booting up with root key combination results in phone getting freeze Or bootlooping
2=. Force shutting phone again bootloop phone.
3= Going to stock recovery and rebooting system bootloop.
4= going to stock recuvery and shutting off phone from there and then simply pressing power button without key combination, successfully bootup phone with root intact.
This is such a bizzare behaviour
Oh and i am still on Android 9 pie.

[Guide] [SM-T515] android 9 Install custom ROM'S and ROOT

SIZE="6"]Use this guide if your tablet is running on android 9. Android 10 is not covered in this guide[/SIZE]
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.

one last question
massivekind said:
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.
Click to expand...
Click to collapse
you have been very kind. I'd like to ask you one last question. for the t515 (since the lineage os is generic) do you also use a particular kernel (which optimizes performance maybe) ?. thanks

gcomunale71 said:
Instructions:
you have been very kind. I'd like to ask you one last question. for the t515 (since the lineage os is generic) do you also use a particular kernel (which optimizes performance maybe) ?. thanks
Click to expand...
Click to collapse
No I don't have any, but if there is one for the 510 give it a try.
Of course backup before flashing

Hi,
Thanks for the guide. Which ROM you recommend? Everything working for you (LTE modem etc)?
Can you now install 64bit apps from Google Play? Any chance you can check if the DJI Fly app is working on your SM-T515?
https://play.google.com/store/apps/details?id=dji.go.v5
Thanks

liamR said:
Hi,
Thanks for the guide. Which ROM you recommend? Everything working for you (LTE modem etc)?
Can you now install 64bit apps from Google Play? Any chance you can check if the DJI Fly app is working on your SM-T515?
https://play.google.com/store/apps/details?id=dji.go.v5
Thanks
Click to expand...
Click to collapse
Well, It's still a 32bit rom. I've tried to install the app but I'm unable (prob because the app is 64bit)
Everything works fine, I'm running the lineageOS ROM. I have a data bundle and I'm able to internet with it (if I want )

massivekind said:
Well, It's still a 32bit rom. I've tried to install the app but I'm unable (prob because the app is 64bit)
Everything works fine, I'm running the lineageOS ROM. I have a data bundle and I'm able to internet with it (if I want )
Click to expand...
Click to collapse
I thought that this custom ROM is 64bit
When I bought the TAB A I thought it's a bargain, I didn't know that I wouldn't be able to install 64bit apps.

massivekind said:
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.
Click to expand...
Click to collapse
first of all thanks for the great work.
Sorry if this is a stupid question , but before i brick my new SM-T515 I would rather ask the experts.
Now, i have rooted the stock ROM folowing the steps in https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root with no TWRP and want to install one of the custom ROMs you have tested.
will I lose root if flash the Legion ROM GSI?
if yes, can you please put some steps together to root and install TWRP?
i still have the “magisk_patched.tar" from the stock ROM, would that work for the Legion ROM GSI?

dj-rjay said:
Instructions:
first of all thanks for the great work.
Sorry if this is a stupid question , but before i brick my new SM-T515 I would rather ask the experts.
Now, i have rooted the stock ROM folowing the steps in https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root with no TWRP and want to install one of the custom ROMs you have tested.
will I lose root if flash the Legion ROM GSI?
if yes, can you please put some steps together to root and install TWRP?
i still have the “magisk_patched.tar" from the stock ROM, would that work for the Legion ROM GSI?
Click to expand...
Click to collapse
In theory it should work. I've already covered "root" also in the guide

I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?

Sambuca11 said:
I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?
Click to expand...
Click to collapse
Mm strange, i don't use both functions so I can't really help you.
Maybe you could format the sd card via twrp?
On my side the sd card works. Didn't format the sd card so don't really know

Sambuca11 said:
I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?
Click to expand...
Click to collapse
I have the same issue. Any solution?

zamboj said:
I have the same issue. Any solution?
Click to expand...
Click to collapse
I haven't found one yet, I'm going to try go back to Stock as I need my computer to be able to see the tablet to transfer files over. I've tried installing the Legion custom rom and it does the same thing. I'm not sure but I'd love to get an answer to this and I'd love to use a custom rom.
Are there any other Android 10 roms that I could try?

Sambuca11 said:
I haven't found one yet, I'm going to try go back to Stock as I need my computer to be able to see the tablet to transfer files over. I've tried installing the Legion custom rom and it does the same thing. I'm not sure but I'd love to get an answer to this and I'd love to use a custom rom.
Are there any other Android 10 roms that I could try?
Click to expand...
Click to collapse
I have a work app that need a little more ram: the solution is LineageOs (used 1,2gb vs 1,5gb of the stock rom) and I transfer files through recovery. I tried LegionOS but is full of bugs and file transfer doesn't work the same.

I'm back to stock and my computer and can see my table and the SD card is working fine. Its a shame as I'd love to use LineageOS but for now I'm stuck on stock.

I don’t know what I’m doing wrong so need some help please. I’ve installed TWRP and multidisabler. I’ve wiped the system cache data etc like I was flashing a custom rom.
I’ve downloaded the rom from the links flashed it via system image but I still get the message no os installed rebooted and just a bootloop saying unlocked boot loader press power button to start then nothing no booting image from linageos. Just repeats.
Can anybody tell me or guide me on what I could have done wrong and what what I should being

daljitbanga said:
I don’t know what I’m doing wrong so need some help please. I’ve installed TWRP and multidisabler. I’ve wiped the system cache data etc like I was flashing a custom rom.
I’ve downloaded the rom from the links flashed it via system image but I still get the message no os installed rebooted and just a bootloop saying unlocked boot loader press power button to start then nothing no booting image from linageos. Just repeats.
Can anybody tell me or guide me on what I could have done wrong and what what I should being
Click to expand...
Click to collapse
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.

Thanks for the reply I will try that when I get home later in the day and will post the outcome after.
Are there any other roms the we could also try.

massivekind said:
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.
Click to expand...
Click to collapse
I followed what you said but I’m stilling getting the bootloop for some reason could share links of what rom you downloaded and etc.
Because there must be a mistake in making.
Also to what I’ve been reading is that I need something of treble enabler for the device but I really don’t know.

massivekind said:
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.
Click to expand...
Click to collapse
I finally managed to get LineageOS installed. I just deleted all the files and redone loaded them, returned back to stock and did the whole process all over again.
And it worked. ? ? so maybe somewhere down the line put have been a corrupt download or something.
Custom rom has whole different feeling on the tablet now. Thanks again for tutorial, I’ve been waiting for something like this for a while.
You don’t know of any other roms there out there to try?

daljitbanga said:
I finally managed to get LineageOS installed. I just deleted all the files and redone loaded them, returned back to stock and did the whole process all over again.
And it worked. ? ? so maybe somewhere down the line put have been a corrupt download or something.
Custom rom has whole different feeling on the tablet now. Thanks again for tutorial, I’ve been waiting for something like this for a while.
You don’t know of any other roms there out there to try?
Click to expand...
Click to collapse
You've could try havoc os https://sourceforge.net/projects/ha...v3.5-20200522-Official-a64-ab.img.xz/download
Topic over here, I'm not sure if there are things not working, thats something you'd could figure out
https://forum.xda-developers.com/galaxy-tab-a/how-to/rom-havocos-v3-5-treble-guide-t4108127
I didn't tried this one, but is could be an option