Related
I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
abispac said:
I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
Click to expand...
Click to collapse
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
reefuge said:
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
Click to expand...
Click to collapse
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
abispac said:
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
Click to expand...
Click to collapse
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
reefuge said:
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
Click to expand...
Click to collapse
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
abispac said:
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
Click to expand...
Click to collapse
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
reefuge said:
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
Click to expand...
Click to collapse
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Its going to take 5hrs to upload my backup
abispac said:
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Click to expand...
Click to collapse
ok ii'm thinking corrupted partitions too.... but if you are willing to try i've made a xt1063 easy installer script for you to try now normally i work on xt1068 and would test on my xt1068 - so have NO xt1063 its UNTESTED - use at own risk.....
just stock firmware / drivers / adb and mfastboot ( same as my xt1068 script) I see no reason it should not be compatible.
download to pc / unzip to folder / read instruction inside
https://mega.co.nz/#!Tok2DJ6T!ggMoQDfAzuA7cmQQjbGCbXolWZTnx_567vG02CiURVsxt1063 4.4.4 easy installer
I repeat it YOUR choice - if it works- great - if runs ok but rom remains same would suggest somethings corrupt - if it doesnt work at all back to square 1....
now im presuming your boot loader is unlocked, as will fail if locked or relocked - if you use and get error please report what they are, i would have done 5.0.2 but its only 50% downloaded with a 1 hr+ to still go, estimate 2 hrs from time of this post until I can post a link
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
abispac said:
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
Click to expand...
Click to collapse
just to let you know TWRP is now 2.5.8.0 fixes some bugs cause older versions know to break permissions in Lollipop!!
https://mega.co.nz/#!Dx03wTbD!3sDFubGomhegQqdoGzNb1RWnQwApzyaTlVq69uX1TqkFlash-able version (unzip to pc and flash from there) 2.5.8.0
https://mega.co.nz/#!n5cUQCAY!uf66vEcQlmtu6VZMLPxksEFMEioZUFpystzTP6kwU4I Temporary boot version (no flash) 2.5.8.0.
will look but cant promise
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
abispac said:
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
Click to expand...
Click to collapse
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
reefuge said:
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
Click to expand...
Click to collapse
Yeah i tried those erase commands many many times and same result, i cant replace recovery at all, only boot of it, so when i do " mfastbooot flash recovery twrprecovery.img " then try to boot of recovery, i boot into factory recovery not, twrp, but if i do, "mfasboot boot twrprecovery.img" i can see the recovery img gets flashed and the phone boots of twrp. Weird behavior. So when i notice that i tried to flash a rom with mfastboot, and at the end i gave the command mfasboot boot recovery.img (the original rom recovery) then it gets flashed, and phone reboots, but i gets stuck at the motorola logo. This phone its playing hard to get....
heres, my backup https://mega.co.nz/#!md0AwbLR!uWe9PLklIugOziPLV6O_plbU-Zz9EXbqRvUVpYxECk0 hope you can find something.
Im going to take this phone to a shop to see if they can fix it as i have lost all hope, thanks refuuge for your help.
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well
can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046
Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.
Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!
or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=
johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you
Hello
I have bricked my p10. I think backup from working device would be fix it. Probably a lot of people use emui 8 so. I need help
Someone Can upload? I tried really everything
I can try backup from nougat as well, someone could help me with this guys?
Please.
no nothing yet, you can try kingroot and flashify.
ure3808 said:
no nothing yet, you can try kingroot and flashify.
Click to expand...
Click to collapse
I'm rooted, i've got recovery. Now i'm without OS and nothing work.
It's possible to remove and recreate partitions? i cant flash nougat, cuz partitions like... "recovery" "boot" doesn't exist( in oreo boot.img = ramdisk.img, recovery.img = recovery_ramdisk.img) ehh
Did you try this?
If TWRP works than this should work, too.
When you're on Oreo use Tutorial #2.
Jannomag said:
Did you try this?
If TWRP works than this should work, too.
When you're on Oreo use Tutorial #2.
Click to expand...
Click to collapse
Yes, I tried this few days ago..
Tap on oreoupdate.zip and install it.
Click to expand...
Click to collapse
I clicked this file, looked like it was supposed to be installed but I knew the phone has been rebooted too fast.. and I was right, after reboot didn't install update from eRecovery, just start twrp and that's all..
You need Update.APP 8.0.0.360 decompile, use 3 img files, boot, system, vendor, and use fastboot commands.
I said, i tried many methods and no one was good. I flash correct .IMG's via fastboot ( by information from cmd of course ). After flash i reboot to recovery( twrp) and I saw, in partition /system takes some GB so i tried to boot normally but still didn't work, 1st information after reboot - "DEVICE IS NOT TRUSTED" or something like that ( cuz bootloader is unlocked ) after few seconds, system should boot, but it's stuck for while on 1st screen like I said, and then did reboot to eRecovery so..
It's possible to damage bootloader as much.. ?
Hello,
If anyone could help me out it would be greatly appreciated. I have a US model BLA-A09 Mate 10 Pro.
I am definitely somewhat new to this. My Mate 10 is now in a boot loop. It gets to the EMUI recovery, but when attempting to download the recovery package from my wifi it fails and goes no further stating something like "cannot get package info".
I successfully unlocked my phone's bootloader, and succesfully rooted it, and I even got the latest TWRP installed on the phone. What I was trying to do however, was follow this thread https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280.
I was trying to use that thread to get magisk installed but in doing so I went into TWRP and flashed a file called "BKL-L09_ramdisk.img" when my phone is actually BLK-A09.
Now, I have no access to TWRP as far as I can tell, and the EMUI recovery fails as mentioned before. I can only get into fastboot now and I dont know what to do to get the phone working again. Do I need to flash the stock image of my phone or is it possible I messed it up more than that?
Edit: also here is everything I could get from fastboot about the device.
https://ibb.co/dtQ8Rc
Thank you for the help
Ltsmba said:
Hello,
If anyone could help me out it would be greatly appreciated. I have a US model BLA-A09 Mate 10 Pro.
I am definitely somewhat new to this. My Mate 10 is now in a boot loop. It gets to the EMUI recovery, but when attempting to download the recovery package from my wifi it fails and goes no further stating something like "cannot get package info".
I successfully unlocked my phone's bootloader, and succesfully rooted it, and I even got the latest TWRP installed on the phone. What I was trying to do however, was follow this thread https://forum.xda-developers.com/ho...gisk-root-honor-view-10-mate-10-pro-t3749280.
I was trying to use that thread to get magisk installed but in doing so I went into TWRP and flashed a file called "BKL-L09_ramdisk.img" when my phone is actually BLK-A09.
Now, I have no access to TWRP as far as I can tell, and the EMUI recovery fails as mentioned before. I can only get into fastboot now and I dont know what to do to get the phone working again. Do I need to flash the stock image of my phone or is it possible I messed it up more than that?
Edit: also here is everything I could get from fastboot about the device.
https://ibb.co/dtQ8Rc
Thank you for the help
Click to expand...
Click to collapse
Power down your device. Vol+ and Power should bring you to twrp
Ltsmba said:
Hello,
If anyone could help me out it would be greatly appreciated. I have a US model BLA-A09 Mate 10 Pro.
I am definitely somewhat new to this. My Mate 10 is now in a boot loop. It gets to the EMUI recovery, but when attempting to download the recovery package from my wifi it fails and goes no further stating something like "cannot get package info".
I successfully unlocked my phone's bootloader, and succesfully rooted it, and I even got the latest TWRP installed on the phone. What I was trying to do however, was follow this thread https://forum.xda-developers.com/ho...gisk-root-honor-view-10-mate-10-pro-t3749280.
I was trying to use that thread to get magisk installed but in doing so I went into TWRP and flashed a file called "BKL-L09_ramdisk.img" when my phone is actually BLK-A09.
Now, I have no access to TWRP as far as I can tell, and the EMUI recovery fails as mentioned before. I can only get into fastboot now and I dont know what to do to get the phone working again. Do I need to flash the stock image of my phone or is it possible I messed it up more than that?
Edit: also here is everything I could get from fastboot about the device.
https://ibb.co/dtQ8Rc
Thank you for the help
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
-Download UPDATE.zip at the bottom of OP
-Unzip
-Flash in fastboot
253simon said:
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
-Download UPDATE.zip at the bottom of OP
-Unzip
-Flash in fastboot
Click to expand...
Click to collapse
I agree, this saved my device yesterday. I would download the already extracted zip at the bottom of that post (in OP). Flash the SYSTEM.img using fastboot. Then try rebooting. If it still boot loops I suggest you also flash the KERNEL and the RECOVERY_RAMDISK
When I tried to flash the system.img in fastboot it wouldn't work I can flash other things but it says unknown partition