After I tried to backup the device with TWRM, I am now stuck on the boot screen with "samsung galaxy tab s2, powered by android" screen.
I am unable to do anything: turn it off, power + volume up + home or power + volume down + home" nothing actually do anything.
The only think that change something is it to wait battery run out of energy, then the screen turn black but as soon as I plug the charger the same screen "samsung galaxy tab s2, powered by android" come again, I didn't even pushed the power button.
The device was rooted long time ago and was still with the original rom (5.0.1 or 5.1.1 I believe, i am unable to verify).
Any help is welcome!
bump,
I tried removing the back cover, now I can reboot the device more easily just removing the battery connector, before I had to wait the battery run out of power.
I trying the boot the device with the "volume up + home + power botton" pressed.
But still no luck.
Is there a way to boot an alternate rom on the device ?
it turn out that removing the back panel actually disable power or volumes buttons, so putting back the backpanel let the "power + volume down" reboot works, then shortly after doing "volume up + power + home" button let me enter odin mode, now I need a stock rom...
i recovered the device, i just had to install old version of twrp new version did brick the device
bpereira75 said:
i recovered the device, i just had to install old version of twrp new version did brick the device
Click to expand...
Click to collapse
Just got this tablet and I am about to flash a rom on it. This would be my first time, I was gonna update latest twrp and latest lineage os. You think this issue will occur to me?
Related
Hello everyone.
I got a new Galaxy Ace S5830i today.
I rooted it and installed CWM (http://forum.xda-developers.com/showthread.php?t=1552792).
After that I did install Retribution beta 4 (http://forum.xda-developers.com/showthread.php?t=1806471).
Then after rebooting I ended up getting a boot animation loop and neither the recovery mode would work nor the download mode.
Could anyone of you please help me? I feel very uncomfortable with a brick in my pocket. :x
I'd be surprised if neither were working, particularly if you are getting as far as the boot animation.
To clarify, to enter recovery mode: Switch off your phone (pull out the battery and re-insert if its looping and the power button won't work), hold down power button AND home/rectangular button AND volume up button. When you see the Samsumg GT-S5830i logo, let go of the power button but continue to hold down the home and volume up buttons for around 5 seconds then let go of everything. Recovery console should appear on screen.
To enter download mode: Switch off your phone, hold down power button AND volume up button AND volume down button. Warning about custom OS's should appear, followed by download mode after pressing volume up again. If this doesn't work try taking out battery, sim card and SD card, connecting USB lead (screen will be completely powered off) and then trying the key combination.
hi, i Did NOT install any rom to my phone. i just used cwm to click " go to recovery mode "
after that the phone just restarted and and hangs at the boot screen. the one that says samsung galaxy S3GT -I9305
I Tried the
hold power button together with the both up and down volume keys as well as power +up button and power+ down volume key but it just like restarts back to the same boot screen
when i insert the usb cable to my phone via my laptop and my wall mounted charger there is no light being shown that it is being charged
whats going on ?any ideas guys?
clementandre said:
hi, i Did NOT install any rom to my phone. i just used cwm to click " go to recovery mode "
after that the phone just restarted and and hangs at the boot screen. the one that says samsung galaxy S3GT -I9305
I Tried the
hold power button together with the both up and down volume keys as well as power +up button and power+ down volume key but it just like restarts back to the same boot screen
when i insert the usb cable to my phone via my laptop and my wall mounted charger there is no light being shown that it is being charged
whats going on ?any ideas guys?
Click to expand...
Click to collapse
Remove the battery for a few seconds and plug it in, then do this.
Push the volume up + home button + power (start with volume to home to power, keep holding all, dont let go) until it boots.
when i do that it just reboots and coems back to the same screen
but when i use the volume down and home and power i get to this thing called download and then i see "odin" then says downlaoding and now not turn off your target and i can my laptop being connected to the phone.but then thaats all
i fixed it using odin and soem md5 check then, now i am resotirng it from my backiup/
now i wanna isntalla custom rom!! cheebai!! u all
clementandre said:
i fixed it using odin and soem md5 check then, now i am resotirng it from my backiup/
now i wanna isntalla custom rom!! cheebai!! u all
Click to expand...
Click to collapse
Good, apparently you are a major noob ( ), do read some guides before doing anything from now on.
My Galaxy Tab S2 had a fairly old version of TWRP installed that wouldn't let me install more recent ROMs. So to update it, I followed the first set of instructions here (which was probably a terrible idea). I then told it to reboot to recovery. It rebooted, but froze on the initial "Samsung Galaxy Tab S2 Powered by android" image (not the animated one). Now the only thing I can do that gets any change is to hold power + volume down for a little over 5 seconds. This causes the screen to go blank briefly and then it goes straight back to that same graphic. I've tried holding power + volume up + home, but get no response.
Have I permanently ruined my tablet?
mahewa said:
my galaxy tab s2 had a fairly old version of twrp installed that wouldn't let me install more recent roms. So to update it, i followed the first set of instructions here (which was probably a terrible idea). I then told it to reboot to recovery. It rebooted, but froze on the initial "samsung galaxy tab s2 powered by android" image (not the animated one). Now the only thing i can do that gets any change is to hold power + volume down for a little over 5 seconds. This causes the screen to go blank briefly and then it goes straight back to that same graphic. I've tried holding power + volume up + home, but get no response.
Have i permanently ruined my tablet?
Click to expand...
Click to collapse
power + home + vol down
ashyx said:
power + home + vol down
Click to expand...
Click to collapse
I am having a similar experience
see: post 255 in [ROM][T710/T715][8.x] LineageOS 15.1 20190204
Sorry, still a newbie, can;t post URL's
PLC-Geek said:
I am having a similar experience
see: post 255 in [ROM][T710/T715][8.x] LineageOS 15.1 20190204
Sorry, still a newbie, can;t post URL's
Click to expand...
Click to collapse
answered to you here https://forum.xda-developers.com/showpost.php?p=78923233&postcount=256
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
Original firmware I used to fix my sm-t510
Account Suspended
flavarasa said:
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
Click to expand...
Click to collapse
I think "restarts" may be confusing. Switch from down to up as soon as the screen turns off.
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
You can use frija.exe to get the latest stock firmware. To get TWRP you MUST boot to recovery before system. If you allow the tablet to boot to system first, it will overwrite TWRP with the stock recovery. Do this by pressing vol down and power till the screen turns off. As soon as it does, switch from vol down to up while still pressing power and keep holding both till the red warning message appears. You also need to leave the cable attached to the PC while doing this.
Hi I need some help here. I have uninstalled magisk on my phone and now my phone is bricked. I cant go into recovery mode despite trying all button combination. If i were to plug in a charger. The phone will be stucked at the charging logo screen. The only button combi that is working now is power and volume down button which will reset the phone but the phone will get stuck at the loading screen. i have a Samsung note 9.
so you also cant go into odin mode?
power + bixby button + volume -
if you could still get into odin mode you could at least flash the stock rom with odin for pc