Features Working in Pixel Experience for Redmi 4A
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Lights
Sound/vibration
VoLTE
As you can see most of the features of the Pixel Experience ROM are working on the Redmi 4a. Now before any further delay let’s proceed to install official Pixel Experience ROM on Redmi 4A.
Steps to install Pixel Experience ROM on Redmi 4A
To install the custom ROM on Redmi 4A, you need to have these prerequisites.
Prerequisites:
The phone should have TWRP installed.
Download the ROM for your device.
Move the downloaded files to the root folder of your device’s internal storage.
Backup your Redmi 4A as flashing custom ROM will result into the loss of data.
Charge your device more than 70%.
Steps to install Pixel Experience ROM on Redmi 4A
Head over to the TWRP recovery on your device by holding power button and volume button at once for few seconds until Poco logo appears on the screen.
After getting into the recovery mode on Redmi 4A tap “Wipe” option and then select factory reset, tap “Advanced wipe” button and at last swipe the bar to confirm the factory reset.
Now select “Install” option from the TWRP main screen and navigate to the root folder or any other folder where you have downloaded the Pixel Experience .zip file.
Select the Pixel Experience ROM Zip file and then “Swipe to confirm” the flash. It will take 5-10 minutes to install the ROM.
Once complete, you need to select “Reboot to System.” It will take some time to boot for the first time.
You’re using the Redmi 4A with the Pixel Experience ROM.
Based on CAF Official.
Download Link
https://get.pixelexperience.org/get...U2ZlRG9JRDEvNGptc0cyTFJncEE1UjBjdFdzTUdhdUhN/
Nice. Will check out the rom tonight and let y'all know how it is!
Battery is Draining too quickly
Battery is Draining too quickly
parshoo said:
Features Working in Pixel Experience for Redmi 4A
Click to expand...
Click to collapse
can use in 5A or not [Riva]?
For redmi 5a (riva)
Redmi 5A rom link ____
https://get.pixelexperience.org/get...T1JWaW9hU0s0Z1J6b1pmVmMwZG1ZajNQK0Fsei82OTN1/
Related
Hello guys finally MIUI 10 GLOBAL Beta is available for redmi 4x (santoni)
Here is the explanation on how to install this rom along with video
#Prerequisite
1.Custom recovery like TWRP recovery
2.Unlocked bootloader
#STEPWISE METHOD
1.First take a backup of your device data to external storage
2.Reboot in twrp recovery mode
3.Wipe cache,dalvik,system and data
4.Select the rom file and flash it
5.Flash the lazy flasher to prevent bootloop after rom installation
6.Reboot your device
[YOUTUBE]MIUI 10 Global Beta https://mega.nz/#!LDgkxKjZ!9aBW9M3IpdFNWgmHOaMYaMIErDPNLzN3YkQkJiXnpcY
Lazy flasher https://mega.nz/#!uKxGHYTD!Nyl3DvyAPLMhXQZXyhIrE0Xc759xDbacv5rxuarGVYU
https://www.youtube.com/watch?v=FEucUwS3fek
Will this installation remove twrp after complete ?
If you will flash lazy flasher zip file after flashing rom file then TWRP recovery will not be removed.
Can you give the changelog of this version plz ?
MIUI 10 Global Beta ROM 8.7.12 Full Changelog
Security
Fix - Security stops working [Redmi Note 4]
Notification
Fix - No notification on lock screen [Mi 6]
Camera
Fix -The video is stuck when taking 1080P video [Mi 5]
Lock screen
Fix - Phone can unlock without password/fingerprint/pattern [Mi 6]
For Redmi 4x
Improved system stability
Optimised system performance
i did not wipe data. just dirty flash over latest miui 9 8.4.26 and clear dalvik/cache. no problems so far and all my apps and files are still there
Can I create a redmi 8 rom miui 12? There is a tool or a method to do this? Please answer me.
Yes there is go to your computer and:
Go to https://c.mi.com/oc/miuidownload/detail?device=1900376
find Redmi 8 Global in the list on the left
and click download full rom
it is about 2GB.
next you will need twrp
if you dont have twrp already flashed then go here
How to install TWRP recovery on Android smartphones
Installing TWRP on an Android device is the first step towards custom development.
www.xda-developers.com
now boot the phone in recovery (twrp)
DISCLAIMER: I recommend doing a full backup of your device through TWRP, just in case it gets bricked. If it bricks tell me here
the pc should recognize the phone automatically.
move the ROM in the downloads folder.
Go to install in the twrp menu and go to the downloads folder (it is in /sdcard)
select the zip named something with "OLIVE"
and swipe the bar in the bottom to confirm the flash
complete setup
BOOM, you now have miui 12 and android 10
Hope i helped you
Hello,
I want to install a custom ROM (Lineage OS) on my Redmi 4. The problem is, that I can't get TWRP installed.
It's successfully flashed, but when i get into recovery its just MI-Recovery 3
What i know so far, that MIUI reverts the recovery back to stock.
I found many tutorials online, but none of them worked for me.
Some tutorials said, that I have to reboot directly from fastboot to recovery. But then the key combination did not work. Just when the phone is shut down.
Currently the following OS is installed:
MIUI Global 10.2 | Stable
10.2.2.0 (MCEMIXM)
Android Version: 6.0.1 MMB29M
Best regards
Try OrangeFox recovery, different versions of TWRP, etc ...
It's not uncommon to happen, try to boot directly to recovery.
Your bootloader unlocked?
Thanks for your answer.
Unfortunately I already tried all these versions https://dl.twrp.me/santoni/
The bootloader is unlocked.
With boot directly to recovery you mean:
fastboot.exe boot twrp-3.5.2_9-0-santoni.img
There I get the following error: dtb not found
When I type in the comman a second time my device changes to "qhsusb_bulk" in the device manager, which i guess is no good sign.
flatt3rn said:
Thanks for your answer.
Unfortunately I already tried all these versions https://dl.twrp.me/santoni/
The bootloader is unlocked.
With boot directly to recovery you mean:
fastboot.exe boot twrp-3.5.2_9-0-santoni.img
There I get the following error: dtb not found
When I type in the comman a second time my device changes to "qhsusb_bulk" in the device manager, which i guess is no good sign.
Click to expand...
Click to collapse
That line is the key to the solution, check this thread.
Nice, now I am able to get into TWRP.
But saddly my screen is now not responsive.
It asks immediately for a password, but I cant press anything. Is that a known issue or is there a known fix?
flatt3rn said:
Nice, now I am able to get into TWRP.
But saddly my screen is now not responsive.
It asks immediately for a password, but I cant press anything. Is that a known issue or is there a known fix?
Click to expand...
Click to collapse
That's a known bug. The developer said that it is your actual phone's password/pin.
Check TWRP thread of your device, other users also got this problem. And they got a way through.
Managed to brick the device :/.
Had to flash with MiFlash again.
I tried an OTG Cable, but its not supported with my phone.
Tried different recovery images.
Found that issue with other phones, but not in the TWRP thread of the redmi 4.
Found one that was working for me
[UNOFFICIAL] TWRP 3.1.1-0 Recovery for Xiaomi Redmi 4 China [PRADA][BUGLESS]
Unofficial TeamWin Recovery Project Xiaomi Redmi 4 (prada) Last update: 11.11.2017 MIUI9 status: Flash ok Please note: Redmi 4 China (2/16) = prada Redmi 4 China Prime (3/32) = markw Redmi 4 India (2/16) = Redmi 4X = santoni Redmi 4A (2/16) =...
forum.xda-developers.com
Its pretty old, but finally working.
I guess my problem was, that I own the china version, which is prada and not santoni.
flatt3rn said:
Found one that was working for me
[UNOFFICIAL] TWRP 3.1.1-0 Recovery for Xiaomi Redmi 4 China [PRADA][BUGLESS]
Unofficial TeamWin Recovery Project Xiaomi Redmi 4 (prada) Last update: 11.11.2017 MIUI9 status: Flash ok Please note: Redmi 4 China (2/16) = prada Redmi 4 China Prime (3/32) = markw Redmi 4 India (2/16) = Redmi 4X = santoni Redmi 4A (2/16) =...
forum.xda-developers.com
Its pretty old, but finally working.
I guess my problem was, that I own the china version, which is prada and not santoni.
Click to expand...
Click to collapse
Yeah that model causes confusion. Thanks for the hint.
For that phone literally no custom roms exists.
I found one with lineage OS, which is pretty much outdated and wifi is not working fine.
Probably going back to stock rom.
I have attempted to flash multiple TWRP images on my Redmi Note 9 (V12.0.8.0.QJOMIXM) but the result has either been to boot into stock recovery or boot into the TWRP background with missing menu/options? Have I been using the wrong image(s)? Is there one available for this build?
Thanks in advance.
Do trying to watch some videos in youtube about this?
'cause there is of rom version to recovery type
I need TWRP recovery for Redmi Note 9 miui 12.5.1.0(RJOMIXM) Merlin. Help!
I suggest you to try all versions, if you can.
Flashing recovery does not brick your device, you can flash another easily and safely.
I suggest you to flash recovery using fastboot.
Certainly, more than one recovery project will works to you.
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Warnings: - This is not a development thread. This is a help thread. - I didn't build any of them. Use at your own risk. - I don't have the source code for any of them. Use at your own...
forum.xda-developers.com
So I really new into this, I didn't really know what I was doing but i tried to install Pixel Experience on my device. After some struggle it seems that I managed to flash the rom into system. I followed the instruccions to the part where you wipe all data from the phone, but then it got stucked and didn't start the OS, maybe system got corrupted or something bc when I try to reinstall the rom cmd tells me "This partition doesn't exists".
As far as i know there isn't a version of twrp for Redmi note 10 5g so all I have is Xiaomi ADB Fastboot Tools. Pls help me.
What firmware do you want to install？
Can you elaborate on your installation process, guide instructions and firmware sources?
1:
Do not need to use twrp, general Fastboot command to brush the GSI on the line, after installation to play some black screen patch and settings.
GSI always jumps to Fastboot and Recovery after booting, indicating that there is a problem with GSI, replace it with another variant or downgrade version.
2:
Fastboot Method
https://c.mi.com/thread-1857937-1-0.html
jianjianus said:
What firmware do you want to install？
Can you elaborate on your installation process, guide instructions and firmware sources?
Click to expand...
Click to collapse
Correct me if im wrong. I tried to install a GSI of Pixel Experience from this pinned tutorial on the board.
Fire1511 said:
Code:
I am NOT responsible for bricked devices, destroyed SD cards or any
damage that may happen to your device.
Requirements:
Unlocked bootloader.
WARNINGDon't use Nippon gsi they aren't working,I recommend using phh gsi by @phhusson lineage os by @AndyYan and PE 12 by @ponces
How to guide:
power + volume down button
fastboot reboot fastboot
install fastbootd drivers,follow this tutorial
fastboot set_active a
fastboot erase system
fastboot flash system (name gsi.img)
fastboot --disable-verity --disable-verification flash vbmeta (vbmeta.img)
fastboot flash vbmeta_b (vbmeta.img)
fastboot set_active a
fastboot reboot recovery
in recovery select wipe data
reboot to system
The GSI will be installed in your phone
Bugs:
Brightness slider but you can fix it
Recommended rom:
Pixel experience:
Releases · ponces/treble_build_pe
Script and patches for building PHH-Treble Pixel Experience - ponces/treble_build_pe
github.com
Select arm64 ab variant
How to fix brightness slider:
Go to phh treble settings,misc settings enable "use alternative brightness scale", "use linear screen brightness slider" and "allow setting brightness to the lowest possible",reboot the device
There is an better alternative to fix this annoying bug,follow this guide!
[GSI] Brightness Fix & Other Fixes
Brightness black lockscreen fixed & Brightness Slider fix. GSI Misc Settings ✅Use Linear Brightness Scale ✅Force Alternatice Backlight Scale ✅Allow Settings to the lowest Flash this file on magisk and reboot :) Note: There's a better fix...
forum.xda-developers.com
How to fix bluetooth audio:
Go to phh treble settings,misc settings, "Force enable a2dp off-load" and "Bluetooth workarounds" select mediatek option and reboot the device.
How to install magisk on your device:
ROOT GAINED !!!!
THIS METHOD WORKS on both: POCO M3 Pro / Redmi Note 10 5G hey guys.. wonderful news.. been trying here and there and IT WORKS FINALLY i gained root of POCO m3 Pro 5G ! i'll write in steps how it works and post all files i've been using...
forum.xda-developers.com
How to flash gapps:
You need magisk on your phone
Download this file then flash from magisk
MagiskGApps - Browse /r/Stock at SourceForge.net
GApps for Magisk
sourceforge.net
Click to expand...
Click to collapse
My process was a total mess bc I didn't knew my device had 2 partitions in system and the post didn't clarify that, so I found this other tutorial (
). Everything went smoothly, the installation was completed and I wiped all data, rebooted to system, and got stuck on a loop of the Redmi logo. I assumed something gone wrong and I tried to go fastboot again and when i try to install the image sends me the error "This partition doesn't exists".
I don't have the precise commands on cmd I wrote bc i restarted my pc. Sorry.
The source Pixel Experience Plus v415.1 arm64 ab
chileangarbage said:
The source Pixel Experience Plus v415.1 arm64 ab
Click to expand...
Click to collapse
Some people have given feedback that this phenomenon occurs with v415.
I tried it and this problem also appeared. They said that dropping down to V414 would not cause this problem.
I don't know if the latest version has a fix?
I have not tried this firmware again and am currently using lineageos19.1
Andy Yan's personal builds // GSI - Browse Files at SourceForge.net
sourceforge.net
Pixel Experience Plus v415.1 is also reported not to work on MediaTek devices. v414 is the latest working version.
chileangarbage said:
Correct me if im wrong. I tried to install a GSI of Pixel Experience from this pinned tutorial on the board.
My process was a total mess bc I didn't knew my device had 2 partitions in system and the post didn't clarify that, so I found this other tutorial (
). Everything went smoothly, the installation was completed and I wiped all data, rebooted to system, and got stuck on a loop of the Redmi logo. I assumed something gone wrong and I tried to go fastboot again and when i try to install the image sends me the error "This partition doesn't exists".
I don't have the precise commands on cmd I wrote bc i restarted my pc. Sorry.
The source Pixel Experience Plus v415.1 arm64 ab
Click to expand...
Click to collapse
chileangarbage said:
Correct me if im wrong. I tried to install a GSI of Pixel Experience from this pinned tutorial on the board.
My process was a total mess bc I didn't knew my device had 2 partitions in system and the post didn't clarify that, so I found this other tutorial (
). Everything went smoothly, the installation was completed and I wiped all data, rebooted to system, and got stuck on a loop of the Redmi logo. I assumed something gone wrong and I tried to go fastboot again and when i try to install the image sends me the error "This partition doesn't exists".
I don't have the precise commands on cmd I wrote bc i restarted my pc. Sorry.
The source Pixel Experience Plus v415.1 arm64 ab
Click to expand...
Click to collapse
This tutorial works. But not ABSOLUTELY. I did get stucked on bootloader ever after flashing 3 different images. I think that problem was caused because versions of bootloader in my original ROM and installed GSI image didn't match(I was trying to flash latest Android version but my original ROM was Android 11). So I tried flashing the GSI image with Android version 11 and that worked. Therefore, I wanna say that just don't worry just keep flashing and you'll see the Love One.