Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Requirements:
# treblized vendor (P or O)
How to install:-
1. Enable Developer options in Settings app
2. Check Enable OEM Unlocking
3. Reboot to fastboot mode
4. Unlock your bootloader
5. Install TWRP-fastboot only through fastboot boot command (Extract the .img file from the zip)
6. Flash CosmicDan's TWRP Installer through your current TWRP. Credits to @CosmicDan for his TWRP and @mohancm for official TWRP sources.
7. Reboot to TWRP recovery
8. Go to WIPE then ADVANCED then click FORMAT data. This will remove Encryption on your device and allows you to set new passwords when installing the GSI. Note that this will format your internal storage.
9. Treblelize through TWRP Tissot Manager (Go to advanced, click Tissot Manager and choose the repartition userdata option. Select singleboot option then click repartition)
10. Flash Boot image
11. Flash Pie Vendor ( VENDOR_A1_PIE-NFE_20181011 ) by Adb sideload
12. Install System Image (Q_AB_v0.3.img.7z)
13. Flash permissiver_v2.zip or make your boot partition selinux permissive
14. Flash FixZygote.zip
15. Reboot To system
16. Special thanks to @erfanoabdi for porting the Q A/B GSI.
Bugs:-
1. Volte Fully Broken
2. Camera Not Working
3. Wifi Broken ( Connection seems but not connected)
Duplicate thread closed.
Please use this one instead.
Funk Wizard
Forum Moderator
Related
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Requirements:
# treblized vendor (P or O)
How to install:-
1. Enable Developer options in Settings app
2. Check Enable OEM Unlocking
3. Reboot to fastboot mode
4. Unlock your bootloader
5. Install TWRP-fastboot only through fastboot boot command (Extract the .img file from the zip)
6. Flash CosmicDan's TWRP Installer through your current TWRP. Credits to @CosmicDan for his TWRP and @mohancm for official TWRP sources.
7. Reboot to TWRP recovery
8. Go to WIPE then ADVANCED then click FORMAT data. This will remove Encryption on your device and allows you to set new passwords when installing the GSI. Note that this will format your internal storage.
9. Treblelize through TWRP Tissot Manager (Go to advanced, click Tissot Manager and choose the repartition userdata option. Select singleboot option then click repartition)
10. Flash Boot image
11. Flash Pie Vendor ( VENDOR_A1_PIE-NFE_20181011 ) by Adb sideload
12. Install System Image (Q_AB_v0.3.img.7z)
13. Flash permissiver_v2.zip or make your boot partition selinux permissive
14. Flash FixZygote.zip
15. Reboot To system
16. Special thanks to @erfanoabdi for porting the Q A/B GSI.
Bugs:-
1. Volte Fully Broken
2. Camera Not Working
3. Wifi Broken ( Connection seems but not connected)
XDA:DevDB Information
Android Q, ROM for the Xiaomi Mi A1
Contributors
Sonudbm, Erfanoabdi
Source Code: https://mega.nz/#F!CYQxgCDK!Dl4kKANVDRy5kOFkNsuMVw
ROM OS Version: 9.x Pie
ROM Firmware Required: treblized vendor (P or O)
Based On: GSI
Version Information
Status: Beta
Stable Release Date: 2019-03-17
Beta Release Date: 2019-03-15
Created 2019-03-19
Last Updated 2019-03-19
Duplicate thread closed.
Please use this one instead.
Funk Wizard
Forum Moderator
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Requirements:
# treblized vendor (P or O)
How to install:-
1. Enable Developer options in Settings app
2. Check Enable OEM Unlocking
3. Reboot to fastboot mode
4. Unlock your bootloader
5. Install TWRP-fastboot only through fastboot boot command (Extract the .img file from the zip)
6. Flash CosmicDan's TWRP Installer through your current TWRP. Credits to @CosmicDan for his TWRP and @mohancm for official TWRP sources.
7. Reboot to TWRP recovery
8. Go to WIPE then ADVANCED then click FORMAT data. This will remove Encryption on your device and allows you to set new passwords when installing the GSI. Note that this will format your internal storage.
9. Treblelize through TWRP Tissot Manager (Go to advanced, click Tissot Manager and choose the repartition userdata option. Select singleboot option then click repartition)
10. Flash Boot image
11. Flash Pie Vendor ( VENDOR_A1_PIE-NFE_20181011 ) by Adb sideload
12. Install System Image (Q_AB_v0.3.img.7z)
13. Flash permissiver_v2.zip or make your boot partition selinux permissive
14. Flash FixZygote.zip
15. Reboot To system
16. Special thanks to @erfanoabdi for porting the Q A/B GSI.
Bugs:-
1. Volte Fully Broken
2. Camera Not Working
3. Wifi Broken ( Connection seems but not connected)
XDA:DevDB Information
Android Q, ROM for the Xiaomi Mi A1
Contributors
Sonudbm, Erfanoabdi
Source Code: https://mega.nz/#F!CYQxgCDK!Dl4kKANVDRy5kOFkNsuMVw
ROM OS Version: 9.x Pie
ROM Firmware Required: treblized vendor (P or O)
Based On: GSI
Version Information
Status: Beta
Stable Release Date: 2019-03-17
Beta Release Date: 2019-03-15
Created 2019-03-19
Last Updated 2019-03-19
Request to lock this thread OP.
---------- Post added at 12:06 PM ---------- Previous post was at 12:04 PM ----------
WhatzIt2Ya said:
Request to lock this thread OP.
Click to expand...
Click to collapse
Correction: request to lock your 3 OTHER THREADS!
Screenshots?
Duplicate thread Closed
Please use this one instead
Funk Wizard
Forum Moderator
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
INTRODUCTION
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.
Based on TWRP version: 3.2.3
For devices: Cactus
Developers: @iamlordutkarsh
Hello Guys I Am Utkarsh @iamlordutkarsh) ! I am Back with anoter custom recovery for redmi 6a cactus !
Features:
Code:
Translated to EN, PL, zh_cn, & CZ
- Password protection
- Flashlight
- MIUI Incremental OTA Support
- Built-in latest Magisk, SuperSU & AromaFM
- Support two screenshot GUI actions - Power+VolDown to save screenshot in to the internal storage &
Power+VolUp to save screenshot in to the external storage (Will be automatically saved in to the internal in case
that external storage doesn't exist).
- Support automatic reboot after the restore process
- Recovery can automatically modify some props in the ROM directly during the installation
- Some built-in scripts from community
- Tap to wake support
- Advanced deactivation of the stock recovery
- Automatic deactivation of the dm-verity & forced encryption directly during the installation of the ROM
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- Support "set on boot" settings.
So What Are The Bugs ???
** MTP
** You Need To Format Data Once After Flashing OrangeFox !
How To Install ???
* Flash RedWolf Twrp Via FastBoot ( You will Get Many Guides On YouTube And Google )
** Format Data After Flashing RedWolf !
Dowloads -- https: //drive.google.com/file/d/1ZqXOX2vUhQe8g29zEgM5ZNPfFbaVs_T0/view?usp=sharing
Note - Remove Space from link
Is it official?
Rahatul Islam Prince said:
Is it official?
Click to expand...
Click to collapse
No Bro ! Its unofficial
[email protected] said:
No Bro ! Its unofficial
Click to expand...
Click to collapse
I formatted data after flashing recovery. But the data partition is encrypted again. What can I do now? Any permanent fix?
Rahatul Islam Prince said:
I formatted data after flashing recovery. But the data partition is encrypted again. What can I do now? Any permanent fix?
Click to expand...
Click to collapse
Try Using Omfg Twrp
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Hi guys!
I just want to share how to flash GSI on our realme XT RMX1921.
I've testing Phh's Quack (Android 10) and booted.
You maybe can test another GSI and then report it here.
I haven't testing another AOSP GSI or even OEM GSI like OOS / MIUI / H2OS.
I'll update if I was testing it and boot successfully.
If you have simpler way to install GSI then tell me tho.
Here is the steps :
1. Unlock your XT's bootloader and make sure you have installing adb fastboot on your Windows / Linux / Mac
2. Flash TWRP by thesprintster here : https://forum.xda-developers.com/re...ecovery-unofficial-twrp-realme-5-pro-t3985459
3. Download LineageOS by thesprintster here : https://forum.xda-developers.com/realme-xt/development/rom-lineageos-16-0-t3985463
4. Open LOS zip and take the boot.img
5. Download vbmeta by thesprintster here : https://drive.google.com/drive/folders/1JwIpix76opSAToa-4X4YdT_SH5JUOxJQ
6. Download Phh's Quack here : https://forum.xda-developers.com/pr...velopment/aosp-10-0-quack-phh-treble-t3992559 (select arm64-ab-gapps or arm64-ab-vanilla)
6a. You can download another GSIs like ExpressLuke GSIs here : https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/gsi-expressluke-built-gsis-t4003457 and make sure you download the ARM64 AB variant.
7. Boot to TWRP and backup your vendor image (or maybe all your vendor + system + boot + data if you want to back to ColorOS) incase to avoid any error
8. Wipe all except vendor
9. Back to bootloader / fastboot, put your vbmeta.img to your adb fastboot folder
10. Flash vbmeta.img by typing fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
11. Boot to TWRP and copy Phh's Quack System image and LOS boot.img to your rXT
12. Flash boot and system image
13. Flash Gapps (if you download the vanilla variant) or if you want Google-less you can skip this
14. Reboot to system
15. Wait for booting aprrox. 4 minutes
Bug list on Phh's Quack GSI (and another Phh's based GSIs) tested on rXT 8/128 :
- Fingerprint not working (realme disable fingerprint since bootloader unlocked)
- VoLTE not working (global GSI bugs)
- Status bar on side (like battery and clock) got cropped and mis-positioned How to fix clock and battery logo : Go to Settings - Phh Treble Settings - Misc features - Set rounded corners diameter : 15 (or above 15, just fill with values you want)
- Bluetooth Media not working
- you tell?
Tested GSIs :
- Quack Phh-Treble arm64-ab-gapps v202 by phhusson
- Evolution-X 3.3 20191111 ARM64-AB by turbolukex5
Enjoy! :fingers-crossed:
You can correct status bar cropping by enabling developer options and selecting cutout.
I'll just add this here in case anyone needs it.
Also , if anyone finds workarounds for VoLTE, please feel free to post it.
This version of TWRP works on the Lenovo TB-X606FA and TB-X606F. It might also work on the other variants of TB-X606. Reported working on TB-X606X.
Warning: this TWRP will not work for any of the Tab M10 variants with Qualcomm SOCs. For the TB-X505F
* Disclaimer *
* Your warranty is now void and your tablet is cute. *
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will turn you into a furry.
Working:
Almost everything is working including:
data decryption
MTP
OTG
Installation
It is recommended to flash magisk zip after flashing recovery.
If Windows 10 does not recognise your tablet in fastboot mode, then see post #2.
How to install:
1. Unlock bootloader
2. reboot to fastboot: adb reboot bootloader
3. disable dm-verity: fastboot --disable-verity --disable-verification flash vbmeta vbmetalentab.img
4. flash recovery: fastboot flash recovery fbrpx606f.img
5. fastboot reboot recovery (if you cant, turn off device and boot to recovery by holding all buttons)
6. flash magisk.zip
7. Your device is now UwU
OUR WEBSITE: https://sites.google.com/view/femboyrecovery
what is difference between lenovo tb x606v & lenovo tb x606F
cause i have lenovo tb-x606v
Can confirm it works. THX