Hello today I am going to share you how to install stock rom in asus zenfone 4 using raw file
first you must install these :
Intel Usb Driver: http://d-h.st/VfO
Asus Flash Tool Installer: https://yadi.sk/d/K5UINtv9e9ehP
Asus zenfone 4 raw file: http://www.mediafire.com/download/prtp8p7ok6s9izf/Zenfone+4+V4.3.10.raw
After you install, follow my steps carefully
1.boot your phone into droidboot by pressing power + vol up
2.In your pc open asus flash tool
3.In asus flash tool choose model (P400CG) Wipe data (yes) and choose the raw file
http://s10.postimg.org/7ybzsv0xl/Step_1.jpg
4.plug your phone to your pc/laptop
5.after you plug your phone you will see a serial number , and click your device
http://s30.postimg.org/729moup4h/Step_2.jpg
6.start flashing
http://s27.postimg.org/shru3ater/Step.jpg
7.after flashing ,your phone will automatically reboot
8.Enjoy
Thanks guys
or just place raw file in ext sd card and perform SD download from droidboot
Yep..
Sent from my ASUS_T00I using XDA Free mobile app
Cant make use of AFT
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
VioletR said:
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
Click to expand...
Click to collapse
You need AFT version 1.0.0.0 for RAW files. See here: http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=3567
Solved
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Root
Does it require root permissions ? Because i have heard that flasing like this can burn the motherboard please tell ... :crying::crying:
No it can if u flash it 100or200 times
I jab flashed roms in my ZenFone 400cg 90 to 110 times either cm or zenui.. lol... nothing happened
Sent from my ASUS_T00I using XDA Free mobile app
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
I'm using Asus zenfone 4 a400cg mobile droid version 6.6.3 WW I downloaded UL Asus tool firmware 6.6.3 WW and tried to flash error msg coming like image SKU is not match help me to solve this problem
I actually downgraded from lollipop to jellybean,flashing was successful. But the problem is now the back,home and multitask touchpads are not working. It was working fine in the lollipop version, i don't know what happened. Please help me...
I've the same problem. Do you have any remedy?
VioletR said:
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Click to expand...
Click to collapse
Give me img v6.3.5, Please.
No man it is not working this time my mobile got stuck in bootloop
Update
mrvj123 said:
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
Click to expand...
Click to collapse
Update your Asus Zenfone 4 > UL-ASUS_T00I-WW-6.6.3.0-user :laugh: :good:
mrvj123 said:
thank you so much techjohn9 and other guys, this thread is really helpfull...
But my navigation buttons (home, back and window toggle) are not working......
Please suggest me some solutions ...
Click to expand...
Click to collapse
bro u got any fix?
The links in the OP are absolute poison!
Are the files available from any other source?
Where can I find ASUS_BUNDLE.ZIP which droidboot requires?
Hello ! I've tried to unlock bootloader at first and succeeded in that when i was on the lollipop . Unlocking is done by the unlock tool provided by the ASUS Officials.
Then i flashed the cynogen 12.1 unofficial via a boot.img , atwrp v3.img & a system.img.
Everything was fine until i needed to revert back to stock firmware.
And also everytime when i try to boot into recovery via Power & volume (-) button , it boots into system.
I used "adb reboot recovery" to boot into twrp recovery .
So, to revert back i saw a method in which we flash a raw firmware , and i downloaded a 4.0.3 for Asus Zenfone 4.
But after flashing it , the bootloader i unlocked , got locked by itself (means i can open droid boot but cannot modify boot and recovery partition via "fastboot flash boot boot.img" & "fastboot flash recovery recovery.img" ).
I can only flash system via " fastboot flash system system.img".
I tried to unlock it on Jelly Bean but no success.
Also i tried updating the firmawre via OTA and flashing zip in recovery mode but i was not able to boot into recovery mode, even with "adb reboot recovery".
It always ends up with a reboot , then booting into a 'Android logo for 200 to 300 millisec' , & then boot into system.
Then i found a KitKat firmware raw file , but when i flashed it via AFT 1.0.0.0 , it always gives error "no space left for flashing modem binary".
I tried "fastboot erase data" ,"fastboot erase userdata" ,"fastboot erase cache" , & "fastboot erase system" , but ended up with stock rom with no modem binary.
So , i tried to unlock the bootloader again by the "unlock tool" provided by ASUS , but even after connected to a high speed Wifi , It gives connection error and rest of the other things are working fine like browser etc.
I also tried to flash the modem.zip inside the stock firmware zip via fastboot as : "fastboot flash update modem.zip. It has flashed the zip but still no modem binary.
Then i tried to flash the bin file inside the modem.zip as : fastboot flash radio radio_firmware.bin and it gives error : No space left for flashing modem binary.
Now i have a bootloader (locked) but no recovery and a stock firmware with no modem binary.
Cn to ww
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
AlfredDispi said:
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
Click to expand...
Click to collapse
This forum is only for Asus Zenfone 4 A400CG and A450CG; which is a 4 year old device; and should not be confused with the new Zenfone 4(s).
Hey guys I have a Note 5 N9200 and I get this error: "SW REV CHECK FAIL DEVICE 2 BINARY 1" in Download Mode after I tried to flash a new firmware from Sammobile.
I rooted my phone, it worked then I tried to replace the mixer files and I ended up with softbrick and the Download mode error above^ . I can still use TWRP but nothing else..Ty for help
Na7anael said:
Hey guys I have a Note 5 N9200 and I get this error: "SW REV CHECK FAIL DEVICE 2 BINARY 1" in Download Mode after I tried to flash a new firmware from Sammobile.
I rooted my phone, it worked then I tried to replace the mixer files and I ended up with softbrick and the Download mode error above^ . I can still use TWRP but nothing else..Ty for help
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.
[/COLOR]
Uzair40 said:
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.
Click to expand...
Click to collapse
hey, can you help me please, I have searched enough but unable to find any solution.
I tried Odin to flash Indian firmware on my Australian Optus phone (Note 5) and got failed message in Odin. I tried SmartSwitch as well but unable to find S/N number for my phone. Now My phone is stuck on Odin mode. Please help.
PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start
I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
m4gicvn said:
PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start
Click to expand...
Click to collapse
For the TWRP error, are you wiping data (where you have to type yes) first? If you do not do that TWRP won't work. There is also newer versions of TWRP available.
Logel said:
I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful
Logel said:
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
m4gicvn said:
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful
Click to expand...
Click to collapse
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware here (same firmware for n950fd and n950f) - use samfirm program for faster download (only latest ver).
bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware .
Click to expand...
Click to collapse
Very thank you
I downloaded the android version 8, I successfully flashed. But this time it was like the beginning. the phone is moving, into the upgrade and error, android child back
Then the phone automatically enters recovery mode
I implemented the wipe cache and wipe data but could not change the result
bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware
Click to expand...
Click to collapse
How to oem unlock the device?
To oem unlock (like all the new samsung devices) you must enable it in the developer options in settings.
As your phone would not boot oem unlock is not available. you must first ensure the phone can boot to stock firmware
Hello i have brick my phone cph2089
and i have only recovery mode access
no wipe data option
online update dont working
i have download ota file but i have error ( installation failed this installed version is lower than current )
I don't know which version the phone had
can i have please link ota firmware latest update please to unbick my phone
i have also download CPH2089EU_11_OTA_0440 and not working
thanks you !!!
salimizi said:
Hello i have brick my phone cph2089
and i have only recovery mode access
no wipe data option
online update dont working
i have download ota file but i have error ( installation failed this installed version is lower than current )
I don't know which version the phone had
can i have please link ota firmware latest update please to unbick my phone
i have also download CPH2089EU_11_OTA_0440 and not working
thanks you !!!
Click to expand...
Click to collapse
Good night, please do you have links to dowload firmwares from "assorted.downloads.oppo.com" ?
thanks.
no but if you want to format phone i can help you
Hello,
I've been tried to downgrade from android 12 to android 11 (because it is a requirement to install LineageOS, if I believe their website).
I've downloaded stock firmware for my device and region (SWC) on sammobile and samfw (I was pleased to see that both provides exactly the sames files, checked with md5) for various firmware versions (G973FXXSEFUL1, G973FXXSEGVA9, G973FXXUEGVA4) but I'm not able to flash successfully any of them with heimdall (also tried with Odin on a friend's Windows computer but that didn't help).
When I flash the SYSTEM partition, I see a line that says `CUSTOM Binary(SYSTEM) Blocked By OEM Lock` and after rebooting my device is in "brick"-mode but that doesn't prevent Heimdall from flashing anything I want and whatever I flash then (except SYSTEM) brings it back to normal download mode again.
Right now the lines in small monospace font at the top of the screen say:
```
ODIN MODE (AVB Fail)
system: Error validating footer (6)
CUSTOM system
VBMETA G973FXXSEFUL1, 46766431R
```
One thing I've figured out so far is that enabling "OEM unlock" in the developer settings wasn't enough to actually deactivate it, but since I can't boot into anything other that download mode I can't do much about it now I guess...
Any idea what I should do ? What I should flash in what order ?
Many thanks in advance !