Related
Recently i'm just update the Huawei android version, but after restarted the phone, it's keep stuck on the manufacturer logo, unable boot into the main screen.
I did try to press Volume key + and Power unfortunately unable to enter the recovery mode, please help.
Send it to service
If you haven't unlocked the bootloader/installed TWRP/Rooted, then yes I'd agree with the above comment and send to service.
Otherwise follow the instructions here.... https://forum.xda-developers.com/p10/help/tutorial-recovering-p10-p10-brick-t3600211
amonev said:
Send it to service
Click to expand...
Click to collapse
I'd asked the service center but they said will wipe my data, is there anyway to retrieve the data back？
Just for understanding: Did you unlock your Bootloader?
Jannomag said:
Just for understanding: Did you unlock your Bootloader?
Click to expand...
Click to collapse
No, i didnt unlock bootloader.
Did someone managed to fix that? I have same problem.
I used hisuite to install pie update on my p10 and it started bootlooping.
Button combinations for fastboot, factory reset etc dont work, cant even shut down phone unless disconecting battery from the motherboard.
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
sayfsami said:
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
Click to expand...
Click to collapse
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
zgfg said:
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
Click to expand...
Click to collapse
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
sayfsami said:
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
Click to expand...
Click to collapse
eRecovery is different from Recovery (I wrote above the phone to be connected to charger while booting with Vol+ kept pressing; in Recovery there is no option for Installing the latest - but the option is present in eRecovery), but anyway, you probably cannot boot to eRecovery either ;(
It could be also possible to reinstall firmware from HiSuite but you could not connect if you cannot boot
For flashing from Fastboot, you must have Bootloader and FRP unlocked (but to unlock, you must first boot to the system)- if I understood correctly, you didn't play with Bootloader, Fastboot, flashing, etc yet, hence your FRP and BL are locked
Uhm can anyone help me? pls. I unlocked my bootloader and flashed open kirin AEX P1 Beta and it caused me bootloop maybe because I fail to factory reset the second time or at least can I reflash the custom rom to make it work again but I can't access my p10 on fastboot
Hi all my Huawei p8 lite fell and lcd broke, i sended it to cellphone shop to replace LCD, now if i switch my phone on it boot loop on huawei logo it switches on and of the whole time it dont want to charge allso, if i plug in charger it just go straight to huawei logo and starts looping, volume down or up or both and power button doesnt work i managed to hold down volume button and plug in usb cable then it takes me to Fastboot&Rescue mode HiSuite opens on my pc but it doesnt pick up my phone it says on the bottom of the screen PHONE UNLOCKED, any help would be greatly aprecciated
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
persona78 said:
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
Click to expand...
Click to collapse
thanks alot will try later and ask for advice if im stuck
GoldenJet said:
thanks alot will try later and ask for advice if im stuck
Click to expand...
Click to collapse
ok
persona78 said:
ok
Click to expand...
Click to collapse
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
dont know if it matters but im from South Africa
GoldenJet said:
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
Click to expand...
Click to collapse
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
GoldenJet said:
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
Click to expand...
Click to collapse
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
persona78 said:
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
Click to expand...
Click to collapse
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
GoldenJet said:
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
Click to expand...
Click to collapse
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Schubi97 said:
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Click to expand...
Click to collapse
hope it works downloading now the twrp img
GoldenJet said:
hope it works downloading now the twrp img
Click to expand...
Click to collapse
if you need further help just text me
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
allso tried in cmd to enter "adb reboot recovery" it says "error:device "null" not found
GoldenJet said:
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
Click to expand...
Click to collapse
hold up the volume up and the power button all the time till you enter twrp !
Schubi97 said:
hold up the volume up and the power button all the time till you enter twrp !
Click to expand...
Click to collapse
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
GoldenJet said:
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
Click to expand...
Click to collapse
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Schubi97 said:
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Click to expand...
Click to collapse
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Check this
https://forum.xda-developers.com/showpost.php?p=67358156&postcount=14
I noticed that model is "not the same" as our version so probably our twrp doesn't work properly, i know there is a version that probably works but i need to find it.
For now check the link above.
This is full post for your version
https://forum.xda-developers.com/p8lite/general/huawei-p8-lite-firmware-ale-l02-andriod-t3380885
.
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Maybe they damaged your device(battery) while repairing the LCD :/
You can try thi twrp to if you want.
https://mega.nz/#!B8R0xJYb!E8Ldq5_IQ3WmztjZZ-0ykrwVawr0ArPxckAEiV7WytM
.
Schubi97 said:
Maybe they damaged your device(battery) while repairing the LCD :/
Click to expand...
Click to collapse
thanks for the info would aprecciate it if you can get me the right twrp. is that firmware you gave me the full OTA the correct one for my device? they plugged another battery on the phone when mine was out and it did the same thing looping on the huawei logo, just wondering do you call this a soft brick that i have with my phone or is it a hard brick?
Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards
Klotz900 said:
Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards
Click to expand...
Click to collapse
try to flash Stock ROM
.
i cant
persona78 said:
try to flash Stock ROM
.
Click to expand...
Click to collapse
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.
Klotz900 said:
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.
Click to expand...
Click to collapse
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.
keikari said:
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.
Click to expand...
Click to collapse
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%
Klotz900 said:
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%
Click to expand...
Click to collapse
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.
keikari said:
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.
Click to expand...
Click to collapse
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...
Klotz900 said:
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...
Click to expand...
Click to collapse
Bootloader i think is press vol -, don't release and plug USB
to flash rom you need default recovery in phone.
To flash copy update.zip to sd card, whit phone off press vol -, vol+ and power.
Or create a dload folder in sd card and copy to inside the update.app, can extract from update.zip, then whit phone off press vol -, vol+ and power.
.
Hello,
After restoring the factory settings from the RROS ROM, the whole system fell. It pauses on the Honor screen.In fastboot & rescue mode I have information phone unlocked.When i try to uploa system through ADB, the phone continues to loop on the Honor logo.
I also tried to upload the update.app file to the DLOAD folder onto the micro SD card, but after pressing the VOL + VOL- and power button nothing happens - the Honor logo still remains. Please help me to fix my phone :/
Creeq554 said:
Hello,
After restoring the factory settings from the RROS ROM, the whole system fell. It pauses on the Honor screen.In fastboot & rescue mode I have information phone unlocked.When i try to uploa system through ADB, the phone continues to loop on the Honor logo.
I also tried to upload the update.app file to the DLOAD folder onto the micro SD card, but after pressing the VOL + VOL- and power button nothing happens - the Honor logo still remains. Please help me to fix my phone :/
Click to expand...
Click to collapse
pressing the VOL + VOL- first,and keep.Then press the power button.Keep and wait till the screen is on,then Release the power button.!!#!!Your should not release the vol+and - until the honor logo disappear and the recovery or fast boot (may be a white background with a Android) mode is ready.You may need to keep pressing the volume for 10 mins or more.Just be patient and wait!
The fastboot is always available, unless the hardware is failed!BTW,Huawei fast boot need keys to unlock.As you have RR on your device,you may unlock it before.
I was using the FLASH tool to update my phone to the latest version 9.1.0.327 but something mustve happened because the install failed. After that, I tried to fix it but upon rebooting the device wouldn't boot and would go to erecovery. However, it's unable to stay in the erecovery for more than approx 30 seconds so I can't recover my phone through erecovery.
I tried manually flashing the firmware files through fastboot but that doesn't do anything either - it's the same situation and the phone won't boot.
Anyone got ideas on what to do to fix my phone?
exactly the same issue (9.1.0.326 update)
it wont stay in eRecovery either. its bricked for now
UPDATE - All i can manage to do for now is - booot into fast boot, (usb plugged in hold DOWN + POWER)
then flash twrp
Fastboot flash recovery_ramdisk "D:\Apps\Android\P20Pro\TWRP-3.2.1-Pretoriano80-P20P.img"
reboot, now
power on holdin DOWN VoL with the cable plugged in, TWRP. If that doesnt work enter eRecovery, factory reset! Reboot, TWRP comes up automatically
Now i have TWRP back at least. dont know what to do from there
anyone of you can send me boot.img of the 9.1 version please i need it
thanks a lot