Hello.
I recently purchased a P30 Pro 512GB (Model VOG-L29 Build Number: 9.1.0.124(C431E4R2P2) GPU Turbo) and wished to try some games using a physical game controller.
As I had a PS3 game controller and an OTG cable I thought that would be an easy (and cheap) solution. I understand that I wouldn't be able to connect via bluetooth without root, but I should be able to use it via cable?
However only half of the pad works (left analogue and a couple shoulder buttons), I installed Game Controller KeyMapper from the play store to check and it appears that every other button is returning Key Pressed = 0
I unplugged the cable and tried this setup on my Huawei P10 Plus and it worked perfectly.
Could anyone suggest reasons for this issue and possible work around?
larrytango said:
Hello.
I recently purchased a P30 Pro 512GB (Model VOG-L29 Build Number: 9.1.0.124(C431E4R2P2) GPU Turbo) and wished to try some games using a physical game controller.
As I had a PS3 game controller and an OTG cable I thought that would be an easy (and cheap) solution. I understand that I wouldn't be able to connect via bluetooth without root, but I should be able to use it via cable?
However only half of the pad works (left analogue and a couple shoulder buttons), I installed Game Controller KeyMapper from the play store to check and it appears that every other button is returning Key Pressed = 0
I unplugged the cable and tried this setup on my Huawei P10 Plus and it worked perfectly.
Could anyone suggest reasons for this issue and possible work around?
Click to expand...
Click to collapse
HI I was wondering if you ever found how to make your controller work? I m having the same problem on a honor 8x, it used to work perfectly and recently only my left joystick seems to respond
Have you guys found a fix for this problem? I have the same problem like you on my Mate 20 Pro. My Ps3 controller works on any phone except my phone.
Related
Good morning/afternoon/evening all,
For the last several hours, I've been trying to pair my Wii U Pro controller to my phone and I've tried all (including that bluetooth fix app that was all in Japanese) and nothing seems to work. I even tried the regular Wii controller app just to be sure.
I've actually contacted Nintendo and the device was not actually given a PIN to use on devices, just the Wii U.
So my question is:
Is there any way to pair the device without the PIN? The phone recognizes it instantly, however obviously no PIN combination works.
Specs of Phone:
Note 4 [Canadian] Rooted
TEKXodus N4
Bluetooth works fine with regular devices (with PIN)
Any help would be greatly appreciated.
I've been trying use a Bluetooth gamepad, but ever one I've tried (I think three different ones) have given me severe input lag on the order of 4 seconds (so nothing happens for 4 seconds l, but if you hold it long enough, it will stick for another 4 seconds) Anyone else experience this?
I also tried connecting a wired Xbox 360 controller through the USB-C with an adapter, but it only seems to power it; doesn't know what to do.
It could be partially the controllers' fault. I have one of the newer Xbox One controllers with Bluetooth. I haven't tried it yet but will see when I get home.
To support the 360 controller I believe you need a key layout file or something. There's a Magisk module that claims to add it ("1 Controller")
Ok, just tried the Xbox One controller and there was no lag at all. So it's possible, just maybe need to keep trying controllers
I've tried it with two off-brand Bluetooth controllers (the kind you get on Amazon when you search Android controller), and the Nintendo Switch Joy-Con. All had the same symptoms.
Hmm. From a quick Google, the Joy Cons lagging on Android seems to be a common issue, but entirely random depending on device, even ones with good ROMs like the Nexus series. Seems unlucky.
I just picked up an Ipega 9023. No lag and works beautifully. It does help having octopus installed
Loved It
Thank you
Hi guys, so I was looking for some controllers for my Tencent Rog II because the Kunai is not out yet. I ended up buying Beboncool Saitake 7007x gamepad and Flydigi Wasp 2 gamepad. Both of these gamepads worked well with my Pocophone F1, but when I use them on ROG II, the phone see them as mouses not a controller, I can map my keys but when I press the buttons nothing happen. I also enabled USB Debugging before connect them. Does anyone have the same issue? I did googled a bit and someone said you need to have root, still, no straight answer.
Any advices will be much appreciated
Thank you for reading :fingers-crossed:
Won't work. I'm not sure if it has to do with Asus game genie but any 3rd party control that uses an overlay will not work. Unless I'm missing something in my tests it does not register at all.
Choose classic mode
I have tried a Flydigi wee2, wee2T and Apex. They all do NOT WORK on the ROG phone 2 while working fine on other phones including the ROG 1.
It just makes a mouse cursor appear and is calibrated wrong too of where it touches.
If we can figure out how to disable mouse mode for the ROG phone 2, then maybe we can get these to work.
They can only work in native based controller games that have support baked in aka classic/native mode. They do not work in games that will need mapping aka flashplay mode. So in other words we can play NO games that need to be mapped with these controllers.
We need a fix from Flydigi or ASUS. if not we are s**t out of luck and have to figure something ourselves.
dungnghien said:
Choose classic mode
Click to expand...
Click to collapse
Yes this is the solution - use classic setting after activation you may need to restart the gamepad as well - sometimes i have problems detecting the gamepad properly a phone restart will require by then also make sure your airtriggers are off so the program wont be confused this will cause issue on flydigi app.
Is there a way to switch to classic mode without having to wipe on ww?
fourleaf279 said:
Hi guys, so I was looking for some controllers for my Tencent Rog II because the Kunai is not out yet. I ended up buying Beboncool Saitake 7007x gamepad and Flydigi Wasp 2 gamepad. Both of these gamepads worked well with my Pocophone F1, but when I use them on ROG II, the phone see them as mouses not a controller, I can map my keys but when I press the buttons nothing happen. I also enabled USB Debugging before connect them. Does anyone have the same issue? I did googled a bit and someone said you need to have root, still, no straight answer.
Any advices will be much appreciated
Thank you for reading :fingers-crossed:
Click to expand...
Click to collapse
beboncoll saitake 7007 and flydigi wasp 2
Can it fit to the size of rog phone 2?
ryuseidatr said:
beboncoll saitake 7007 and flydigi wasp 2
Can it fit to the size of rog phone 2?
Click to expand...
Click to collapse
Only the wasp 2 fit the ROG II even with a case on. The saitake sadly will not fit nor work
I using APEX flydigi and success play with key map. First you must select classic mode then use the dongle provide by flydigi, plug-in the dongle to the power adapter then connect the dongle to the asus rog phone 2. Finish setup using dongle, you can pull out the dongle from the phone and start to key map..
And this works 100%? Does classic mode disable air triggers? Me people say it's just a theme.
thugsta1 said:
I have tried a Flydigi wee2, wee2T and Apex. They all do NOT WORK on the ROG phone 2 while working fine on other phones including the ROG 1.
It just makes a mouse cursor appear and is calibrated wrong too of where it touches.
If we can figure out how to disable mouse mode for the ROG phone 2, then maybe we can get these to work.
They can only work in native based controller games that have support baked in aka classic/native mode. They do not work in games that will need mapping aka flashplay mode. So in other words we can play NO games that need to be mapped with these controllers.
We need a fix from Flydigi or ASUS. if not we are s**t out of luck and have to figure something ourselves.
Click to expand...
Click to collapse
Dear.
Dear. Do u have a solution for this case
Thanks.
dungnghien said:
Choose classic mode
Click to expand...
Click to collapse
How to choose classic mode
https://www.androidinfotech.com/asus-rog-phone-2-android-10-stock/
flash this rom,then your problem solved
fourleaf279 said:
Hi guys, so I was looking for some controllers for my Tencent Rog II because the Kunai is not out yet. I ended up buying Beboncool Saitake 7007x gamepad and Flydigi Wasp 2 gamepad. Both of these gamepads worked well with my Pocophone F1, but when I use them on ROG II, the phone see them as mouses not a controller, I can map my keys but when I press the buttons nothing happen. I also enabled USB Debugging before connect them. Does anyone have the same issue? I did googled a bit and someone said you need to have root, still, no straight answer.
Any advices will be much appreciated
Thank you for reading :fingers-crossed:
Click to expand...
Click to collapse
you need to install flydigi game centre app from playstore
Hi, i just bought the Mi 9 Lite 2 months ago and in my experience, everything is as good as i expected. But there's just a teeny tiny bit of problem: My last phone is an OPPO F9 using ColorOS 6, and i usually play emulated game on it with a USB joystick (somewhat crappy but usable).
I bought a OTG cable, one side to connect the controller and one for the phone and it worked well right away without using any additional third-party apps.
But now when i try to do the same with the Mi 9 Lite it just won't work, there's lights on but no input can be made. I tried to figure it out on youtube, google and downloaded some third-party apps, all of them didn't work for me. It seems to be MIUI problem with the UBS Joystick?
I'm pretty much dumbfounded, looking for help right here, hope i won't have to throw my controller into the trashcan (at least i still have my ps4 controller which still works with bluetooth, just not the crappy USB joystick)
Tommit said:
Hi, i just bought the Mi 9 Lite 2 months ago and in my experience, everything is as good as i expected. But there's just a teeny tiny bit of problem: My last phone is an OPPO F9 using ColorOS 6, and i usually play emulated game on it with a USB joystick (somewhat crappy but usable).
I bought a OTG cable, one side to connect the controller and one for the phone and it worked well right away without using any additional third-party apps.
But now when i try to do the same with the Mi 9 Lite it just won't work, there's lights on but no input can be made. I tried to figure it out on youtube, google and downloaded some third-party apps, all of them didn't work for me. It seems to be MIUI problem with the UBS Joystick?
I'm pretty much dumbfounded, looking for help right here, hope i won't have to throw my controller into the trashcan (at least i still have my ps4 controller which still works with bluetooth, just not the crappy USB joystick)
Click to expand...
Click to collapse
I tried connecting a USB xbox360 Joystick on my mi 9 lite and it didn't work. But PS4 via Bluetooth worked fine. I think that it must be kernel related. If you are rooted with magisk, you can try to install a module that supposedly, it adds support for all other controllers. I tried to on my old phone (Samsung Galaxy J3) and unfortunately it didn't work. But you can try anyway
I have a similar problem i kinda know why ist not working and have no solution.So when i first bought my phone i used my f710 it was working perfectly after i think upgrading miui 11 my f710 stops working it doenst even respond in any app but when i try to use it with steam remote play app Steam asked for permission to acces usb device(like asking permission for your storage or camera etc.) i granted and it was working perfectly again but only in steam remote play. So the issue is the other apps games or emulator doesnt even ask for permission and gamepad doesnt work.
Hello guys i Found the solution!
Go to settings and found miui press 5 times and become developer, then go to developer options and disable miui optimization DONE. Then will ask for permission when you connect controller.Connect usb otg adapter and controller will work (my controller is torid speedlink)
Hi normally I enjoy a bit of xcloud on my huawei p20 pro with my razer kishi.
But today I couldn't get the controller working.
I checked the connection in the setting and it was showing has a charging device.
I tried my emulators and same issue.
Looked at the controller in its native app and its not showing up.
I'm sure this is a new issue from the last update.
I will need to check my kishi on my wife's phone later.
But that controller is very new and built very well.
Can I downgrade if it is update issue..
Anyone else had issues