Database Develop

CSC Change

Hi everyone,
I've purchased a Korean Galaxy Note 8 (SM-N950N) and rooted it with TWRP and SuperSu. Now I want to change CSC to Vietnam.
I already download 2 stock firmwares (Korean and Vietnamese).
Can you please guide me for next steps with Odin?

just go grab the S8 CSC changer and use that. All we have to do is add 1 line in one of it's scripts so that it will run on a device with 'greatlte' in the name.

Kalm_Traveler said:
just go grab the S8 CSC changer and use that. All we have to do is add 1 line in one of it's scripts so that it will run on a device with 'greatlte' in the name.
Click to expand...
Click to collapse
Hi Kalm,
Thank you for your answer. Could you please give me a link with instructions inside?

khoanb1 said:
Hi Kalm,
Thank you for your answer. Could you please give me a link with instructions inside?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/utility-flashable-csc-selection-v1-1-0-t3636739
Another user posted in one of the most recent pages exactly what needs to be edited for it to run on a Note 8. Super easy, takes 2 seconds to do, then you just zip it up again and flash/run it in TWRP.

Kalm_Traveler said:
https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/utility-flashable-csc-selection-v1-1-0-t3636739
Another user posted in one of the most recent pages exactly what needs to be edited for it to run on a Note 8. Super easy, takes 2 seconds to do, then you just zip it up again and flash/run it in TWRP.
Click to expand...
Click to collapse
It seems that this CSC Selection file did not work for me even I already updated the script file META-INF/com/google/android/updater-script with this code:
getprop("ro.product.device") == "greatlte" || getprop("ro.build.product") == "greatlte" || getprop("ro.product.name") == "greatlte" ||
When I flashed zip file I got error no digest file found

I have this problem could not find any specific answer so far. I'm from UK with an international Note 8 (N950F) unlocked and want to use it with THREE, especially from the wi-fi calling. So, downloaded THREE firmware and after extraction, I got CSC and HOME_CSC among others. First, through ODIN installed HOME_CSC after reboot could not notice any difference at all, the mobile seems the same so decided to install the CSC which obviously wipe the Note. The same, nothing different on the phone. Lastly, I installed everything (AP, BL, CP, CSC) only that way I got Wi-FI calling but also many apps from THREE ( Deezer, Three, Three likes, Ebay, Amazon Underground, Prime video, Amazon MDIP, Operator Settings) and a horrible start-up boot logo and so on. Despite I got Wi-Fi calling I got more stuff and I am not happy at all. Thinking seriously to go back to the international version I had. Does anyone know why after changing the CSC was not any difference in my Note?
Find attached two pictures, first one shows the wi-fi calling option under Contacts-Settings using THREE firmware, and the other one is from the UK international firmware where wi-fi calling option is not there.

Khoanb1, Kett_Traveler modified the S8 CSC Changer zip to work for the Note 8 but only added the USA CSC to it because that's what he needed. I've since took his zip and added the Canadian Multi-CSC (XAC) for myself and the European Multi-CSC (DBT) for you. The European Multi-CSC (DBT) contains the Vietnam CSC (XXV). Download the zip from MEGA here and install it with TWRP. When it asks you which CSC to install, choose DBT, then choose XXV in the next screen to select your Vietnam CSC. Make sure to select XXV and not keep it at the default of DBT at the 2nd menu.
I've successfully used this zip to change my CSC to the Canadian one. Note that after the CSC change, your phone will factory reset itself and wipe all your data (if I remember correctly). So make sure to backup externally first if needed. After a restart, your phone will boot up with the proper boot animation for your CSC and you'll have all your carrier-specific features. For me, changing my CSC allowed me to connect to LTE networks which was not possible before (I was limited to 4G speeds instead). Also, the Korean apps that came with the phone are preloaded onto our system partition, so you have to delete them from /system/apps or through Titanium Backup. You can also freeze them if you prefer.
Note: I haven't tested the install with the XXV CSC so test it and tell me if it works.

peacey8 said:
Khoanb1, Kett_Traveler modified the S8 CSC Changer zip to work for the Note 8 but only added the USA CSC to it because that's what he needed. I've since took his zip and added the Canadian Multi-CSC (XAC) for myself and the European Multi-CSC (DBT) for you. The European Multi-CSC (DBT) contains the Vietnam CSC (XXV). Download the zip from MEGA here and install it with TWRP. When it asks you which CSC to install, choose DBT, then choose XXV in the next screen to select your Vietnam CSC. Make sure to select XXV and not keep it at the default of DBT at the 2nd menu.
I've successfully used this zip to change my CSC to the Canadian one. Note that after the CSC change, your phone will factory reset itself and wipe all your data (if I remember correctly). So make sure to backup externally first if needed. After a restart, your phone will boot up with the proper boot animation for your CSC and you'll have all your carrier-specific features. For me, changing my CSC allowed me to connect to LTE networks which was not possible before (I was limited to 4G speeds instead). Also, the Korean apps that came with the phone are preloaded onto our system partition, so you have to delete them from /system/apps or through Titanium Backup. You can also freeze them if you prefer.
Note: I haven't tested the install with the XXV CSC so test it and tell me if it works.
Click to expand...
Click to collapse
Hi peacey8,
Thank you very much for your effort and your thorough guidance. Your zipped file worked very well for my device and now I could have XXV CSC code in my Galaxy Note 8.
I can see some big changes:
1. boot logo is the same with Note 8 devices distributed in Vietnam
2. some apps were installed by default like these devices
3. Samsung Pay can recognise Vietnamese network providers (but I could not still use it because my device was rooted). If you have any idea about it, please let me know.

Great! I'm glad it worked. Unfortunately, Samsung Pay will not work because Knox was tripped. Android Pay still works though if you use Magisk root with Magisk Hide.
Right now there is no solution to Samsung Pay with root. In the future there could be some solution. I'm sure some creative person will come up with something eventually.

peacey8 said:
Great! I'm glad it worked. Unfortunately, Samsung Pay will not work because Knox was tripped. Android Pay still works though if you use Magisk root with Magisk Hide.
Right now there is no solution to Samsung Pay with root. In the future there could be some solution. I'm sure some creative person will come up with something eventually.
Click to expand...
Click to collapse
Hi peacey8,
Thank you for your explaination. I have another question:
What will happen if I flash all tar files in the Vietnamese stock firmware to my Korean Note 8?
Will I get the CSC code like devices distributed in Vietnam? And will Odin allow me to do this?

khoanb1 said:
Hi peacey8,
Thank you for your explaination. I have another question:
What will happen if I flash all tar files in the Vietnamese stock firmware to my Korean Note 8?
Will I get the CSC code like devices distributed in Vietnam? And will Odin allow me to do this?
Click to expand...
Click to collapse
Honestly I'm not sure if it's impossible. I'll let someone more knowledgeable than me answer that question. However the Korean Note 8 and the Vietnamese Note 8 are both running on the Exynos SoC, so it might be possible to switch firmwares with a lot of hard work and many problems. For one, the devices have different storage capacities and so will have different PIT files (the file that determines which tar image file goes where and how big it should be). Another issue is the bootloader (the most basic, low-level software of the phone that talks to the hardware to start your phone up) is different for the Korean and European models, so you can't flash the Vietnamese BL file on the Korean model. It would brick the phone if you did.
So in short, no you can't flash a different firmware. But, why do you need to? What's wrong with the current solution of switching CSCs that you just did? Is there still a feature you are missing?

peacey8 said:
.....I've successfully used this zip to change my CSC to the Canadian one. Note that after the CSC change, your phone will factory reset itself and wipe all your data (if I remember correctly)...
Click to expand...
Click to collapse
i've used a similar file for the S8+ and my phone rebooted with a new CSC and the message "Android is updgrading"... but it did not wipe my phone.

peacey8 said:
Honestly I'm not sure if it's impossible. I'll let someone more knowledgeable than me answer that question. However the Korean Note 8 and the Vietnamese Note 8 are both running on the Exynos SoC, so it might be possible to switch firmwares with a lot of hard work and many problems. For one, the devices have different storage capacities and so will have different PIT files (the file that determines which tar image file goes where and how big it should be). Another issue is the bootloader (the most basic, low-level software of the phone that talks to the hardware to start your phone up) is different for the Korean and European models, so you can't flash the Vietnamese BL file on the Korean model. It would brick the phone if you did.
So in short, no you can't flash a different firmware. But, why do you need to? What's wrong with the current solution of switching CSCs that you just did? Is there still a feature you are missing?
Click to expand...
Click to collapse
It's only a question because I'm so confused if I can totally convert my Korean device to Vietnamese one.
You are right, so dangerous to replace bootloader even I already created backup for all partitions.

khoanb1 said:
It's only a question because I'm so confused if I can totally convert my Korean device to Vietnamese one.
You are right, so dangerous to replace bootloader even I already created backup for all partitions.
Click to expand...
Click to collapse
Hi Khoanb1,
Luckily i found your thread up here, i'm a clueless Vietnamese when it come to rooting phone and other related things. I also bought an KR Galaxy Note 8 lately and have been wondered since then. Is there any other feature that missing on an KR note 8 to a distributed VN note 8?
Would you be so kind to instruct me install them just like you did? im a total noob here.
If you dont mind i can ask for your social media account so we can discuss further.

lluvias91 said:
Hi Khoanb1,
Luckily i found your thread up here, i'm a clueless Vietnamese when it come to rooting phone and other related things. I also bought an KR Galaxy Note 8 lately and have been wondered since then. Is there any other feature that missing on an KR note 8 to a distributed VN note 8?
Would you be so kind to instruct me install them just like you did? im a total noob here.
If you dont mind i can ask for your social media account so we can discuss further.
Click to expand...
Click to collapse
Hi lluvias91,
I already sent you a private message including my fb account, let's start our converstion about this topic

do you know guys if a packed Note 8 Eng Boot for Exynos variant (SM-N950F) is available ?

tengo el inconveniente con el n950F Exynos sin interruptor de desbloqueo OEM Ayuda

I have the N950F Exynos phone and want to flash the US Mobile CSC to get Wi-Fi calling. I don't have root and am in jail with the no oem unlock issue. I was wondering if I could just flash the CSC from the complete N950U firmware using ODIN. Or can you not mix the F firmware files with the U versions?
I saw the zip file to do the same but it requires root and TWRP to flash.
Not sure I like this phone being locked down. Very frustrating not being able to just root and install a working ROM without having to wait 7 days!
Thanks

In download mode. My carrier id is blank. How do i add the id back?

Hi guys
I buy mine in Morocco N950F Dual Sim (Exact version : SM-N950FZDDMWD).
My phone are not rooted and i dont want to do it for the moment. dont want to increment the knox
I need the french CSC. If i downlaod a french stock firmware N950F and install it with Odin.
It will work without loosing my garante and continue to use samsung Pay ?
Sorry for my bad english
thanks in advance

[Guide] Change Note 9 CSC Without Root - Easy Guide

I followed a guide by XDA User applepay from this link, but just wanted to try and simplify it because i found it pretty complicated to understand at first.
It would be worth reading that thread before this even if it doesn't make sense. Please also read this complete thread before you attempt it.
I have only followed the guide so i can't answer any questions to help. I am not responsible for any problems you run into. This is just a guide of what I did to get mine to work.
I was successful using my SM-N960F going from CSC XME to TEL.
I cannot confirm that this method will work on other models, but i don't see why not considering the guide was originally for a S9.
Make sure you select your exact model when downloading files and flashing files. Using other model firmware may brick your phone.
Backup your files! I used Smart Switch on windows. This method will wipe your phone in the process.
Use the original usb cable you got in the box and install the Samsung USB drivers if you haven't already.
I have confirmed on my device that OTA updates work fine after this procedure.
Please comment if you think there is a better way or there is an error in this guide.
Download your combination file from here
Download your new CSC firmware from here
Download Samsung Odin 3.13.1 from here
Download RealTerm from here
1. Open Odin.
Click AP and select your combination file.
Put your Note 9 into download mode by turning it off completely, then holding the volume down and bixby buttons while inserting the usb cable. Confirm that you want to enter download mode.
Click start in Odin.
Once this is complete, your phone should boot into the combination firmware and show your model number. Close Odin.
2. Open RealTerm and go to Port tab.
Set Baud to 230400 and Select Port to ssudmdm0000 or very similar name.
Click the change button.
Go to Send tab.
Enter "AT" and click Send ASCII.
If you get a response like
"+USB READY
BOOTING COMPLETED
AT"
or
"AT"
or
"OK"
or
"BOOTING COMPLETED
AT"
Proceed to the next number.
If you didn't get a response click +CR and send again.
If you get a response like "ERROR" proceed to the next number.
Still if you didn't get a response check your phone status and cable status.
If everything is normal proceed to the next number.
If still you didn't get a response it means your phone or cable is not normal status.
3. Enter "AT+PRECONFG=1,0" and click Send ASCII.
You will get this response.
AT+PRECONFIG=1,0+PRECONFG:1,???
OK
-??? is your current CSC.-
4. Enter "AT+PRECONFG=2,???" and click Send ASCII.
Enter ??? you want to change to another CSC.
You will get this response.
AT+PRECONFG=2,???+PRECONFG:2,OK
OK
-??? is your changed CSC.-
5. Enter "AT+PRECONFG=1,0" and click Send ASCII.
You will get this response.
AT+PRECONFIG=1,0+PRECONFG:1,???
OK
-??? is your changed, current CSC.-
6. CSC change is now complete. You can now close RealTerm.
7. Open Odin again.
Turn your phone off and then put it into download mode again by holding the volume down and Bixby buttons, then plugging the usb cable in.
Fill each field (BL, AP, CP and CSC) with their respective files from the firmware which has the new CSC.
Use the CSC file in the CSC field, not HOME_CSC.
Click start. This will now wipe your phone completely.
8. Your phone should boot into android and everything should be complete!
Enjoy using VoLTE, VoWiFi and RCS!

Many thanks! Will give it a go.
Sent from my SM-G955F using Tapatalk

Work on sm-n9600 hong kong variant?
Enviado desde mi SM-N9600 mediante Tapatalk

Thanks. Worked on my n960f/ds

@laneyyy I guess this is for unrooted device right? There are much easier ways of doing it in rooted device

Techvir said:
@laneyyy I guess this is for unrooted device right? There are much easier ways of doing it in rooted device
Click to expand...
Click to collapse
Yeah this is for unrooted devices

Hmm, will this allow my unrooted n960f/ds to flash the TMB CSC and work? Or does this just let you change to another CSC within the multi CSC?

SystematiQ said:
Hmm, will this allow my unrooted n960f/ds to flash the TMB CSC and work? Or does this just let you change to another CSC within the multi CSC?
Click to expand...
Click to collapse
I'm not sure. I hope someone else can answer that

using n960f with n9600 csc
I have read about this procedure but i dont se any info from other providers than us, Im new about this procedure, i hope you can just help me to understand, i have a n960f and i like to have the csc info from a n9600, im from mexico so it will be great to get all my providers features (telcel) but im kind of lost because i have read about usa providers but no more info, thank you.

SystematiQ said:
Hmm, will this allow my unrooted n960f/ds to flash the TMB CSC and work? Or does this just let you change to another CSC within the multi CSC?
Click to expand...
Click to collapse
Odin still won't let you flash firmware files from an other phone model. which is a good thing since csc.md5 contains a pit file that is very much phone model specific....you dont want that. home_csc.md5 dosent but regardless Odin should still throw an error. I wouldint be game to test with the prince Comey edition of Odin that allows you to do this forcefully apply wrong model firmware file. might work... or not

how about future OTAs after ? if I flashed TMO csc will I get all TMO OTAs in future ?

@laneyyy i need to select combinations file Odion in AP right ? I guess I have to downgrade my firmware first Odin don't let me flash I have the last one firmware

arturodfw said:
@laneyyy i need to select combinations file Odion in AP right ? I guess I have to downgrade my firmware first Odin don't let me flash I have the last one firmware
Click to expand...
Click to collapse
My phone was up to date before I used the latest combination file for my model on that site. I didn't get any errors about downgrading.
As far as OTAs, I'm not sure yet, but worst case is you just need to flash new firmwares by Odin. I think it's definitely worth the trade off to get volte, vowifi and RCS if that's the case

laneyyy said:
My phone was up to date before I used the latest combination file for my model on that site. I didn't get any errors about downgrading.
As far as OTAs, I'm not sure yet, but worst case is you just need to flash new firmwares by Odin. I think it's definitely worth the trade off to get volte, vowifi and RCS if that's the case
Click to expand...
Click to collapse
@laneyyy so the combination file it's on AP option in odin right

arturodfw said:
@laneyyy so the combination file it's on AP option in odin right
Click to expand...
Click to collapse
Ooooh yes. I just saw that I accidentally wrote AT in the guide.

laneyyy said:
My phone was up to date before I used the latest combination file for my model on that site. I didn't get any errors about downgrading.
As far as OTAs, I'm not sure yet, but worst case is you just need to flash new firmwares by Odin. I think it's definitely worth the trade off to get volte, vowifi and RCS if that's the case
Click to expand...
Click to collapse
Agreed

someone please confirm that N9600 chinese snapdragon variant can have working Volte after changing CSC to any US version.
Why the Heck Samsung put region lock! if they do same thing on S10 then I must say goodbye to Samsung for ever!!
we cant even buy a mobile in a foreign country! ?

ran816 said:
someone please confirm that N9600 chinese snapdragon variant can have working Volte after changing CSC to any US version.
Why the Heck Samsung put region lock! if they do same thing on S10 then I must say goodbye to Samsung for ever!!
we cant even buy a mobile in a foreign country! ?
Click to expand...
Click to collapse
what odin you use for the N9600 variant does not work for me, none of them give me fail or port close

laneyyy said:
Ooooh yes. I just saw that I accidentally wrote AT in the guide.
Click to expand...
Click to collapse
@laneyyy works on my S9 plus SM-G9650 but the AT+PRECONFG=2,??? the ??? Its the new CSC U want to change lol that's why my phone no change anything the first time sorry but I figured out now thanks

I can confirm it worked to replace the hedious Hong Kong CSC with a Costa Rica CSC, but just as others, I would like to see if I can use a firmware from US, meaning using a SM-N960U variant on a SM-N9600. Can someone please confirm?

How to get SM-N920I to detect VoLTE in india without root

Hi fellow XDA members,
I own a Galaxy Note 5 (SM-N920I) which was bought in Singapore under operator Starhub (STH). I happen to use this phone in India and I later realized the phone supports VoLTE but the firmware didn't so I stuck with using the Jio4GVoice app for a long time now and I'm done with it due to lot of bugs and call drops.
I looked online for solutions and found many that involved root or custom recovery to flash the so-called VoLTE fix. I have read articles that said the Indian firmware supports VoLTE so I So, I tried the following:
Download the Indian firmware and flashed via odin. But it fails with error specified file not found. Did a research and i unchecked the Re-partition and again tried and it fails at flashing system . So I re-flashed the STH firmware to get the phone boot up. I learnt that CSC is responsible for getting the region specific network to work.
Extract CSC from Indian firmware and simply flash it on odin. But, as articles say that I'll have 4 files for each boxes to place in odin I only had one tar (<firmware_HOME_tar.md5). Then I read, extracting the modem.bin file and ziping that to a tar file and flash it via odin will help. I tried that but no luck (should I factory reset it?).
Both the firmwares have a single file and articles say that there will be CSC_<firmware>.tar and CSC_HOME_<firmware>.tar.
I don't know where I'm getting wrong. Is this even possible or i'm simply wasting my time? I use samsung pay and S health extensively so I don't wanna trip knox.
Update:
I read that cache.img is CSC from here. So extracted the cache from Indian firmware and flashed that to my phone that has STH firmware. I used the Phone info app and found baseband has been changed and available CSC shows INS but active CSC is STH. Now I guess i just need to activate that CSC. I tried the steps mentioned here but it doesn't work.
https://imgur.com/9Fiy4W4
https://imgur.com/vVe6LDQ

ksbalajee said:
Hi fellow XDA members,
I own a Galaxy Note 5 (SM-N920I) which was bought in Singapore under operator Starhub (STH). I happen to use this phone in India and I later realized the phone supports VoLTE but the firmware didn't so I stuck with using the Jio4GVoice app for a long time now and I'm done with it due to lot of bugs and call drops.
I looked online for solutions and found many that involved root or custom recovery to flash the so-called VoLTE fix. I have read articles that said the Indian firmware supports VoLTE so I So, I tried the following:
Download the Indian firmware and flashed via odin. But it fails with error specified file not found. Did a research and i unchecked the Re-partition and again tried and it fails at flashing system . So I re-flashed the STH firmware to get the phone boot up. I learnt that CSC is responsible for getting the region specific network to work.
Extract CSC from Indian firmware and simply flash it on odin. But, as articles say that I'll have 4 files for each boxes to place in odin I only had one tar (<firmware_HOME_tar.md5). Then I read, extracting the modem.bin file and ziping that to a tar file and flash it via odin will help. I tried that but no luck (should I factory reset it?).
Both the firmwares have a single file and articles say that there will be CSC_<firmware>.tar and CSC_HOME_<firmware>.tar.
I don't know where I'm getting wrong. Is this even possible or i'm simply wasting my time? I use samsung pay and S health extensively so I don't wanna trip knox.
Update:
I read that cache.img is CSC from here. So extracted the cache from Indian firmware and flashed that to my phone that has STH firmware. I used the Phone info app and found baseband has been changed and available CSC shows INS but active CSC is STH. Now I guess i just need to activate that CSC. I tried the steps mentioned here but it doesn't work.
https://imgur.com/9Fiy4W4
https://imgur.com/vVe6LDQ
Click to expand...
Click to collapse
here is another method you can try. but this only works if your phone supports it.
For firmware that uses a multi-csc code, you need to select a sales code before attempting to connect to a cellular network. This is especially true for 3G and 4G connections.
There are two ways to select a sales code:
1. Enter *#06# in the phone dialer to obtain the IMEI number for the device. You can then enter *#272*Device IMEI# to select a sales code. If your Samsung device does not return a menu, the product code is not a multi-csc code.
OR
2. Install an CSC changer app, such as the "Phone INFO" app. CSC changer apps do require root access, and they do not work on all phones and all versions of Android.
Hit thanks if it helps !
P.S. IT ONLY WORKS ON STOCK ROM ...! so you need to be on Stock Rom.

dark_phoenix said:
here is another method you can try. but this only works if your phone supports it.
For firmware that uses a multi-csc code, you need to select a sales code before attempting to connect to a cellular network. This is especially true for 3G and 4G connections.
There are two ways to select a sales code:
1. Enter *#06# in the phone dialer to obtain the IMEI number for the device. You can then enter *#272*Device IMEI# to select a sales code. If your Samsung device does not return a menu, the product code is not a multi-csc code.
OR
2. Install an CSC changer app, such as the "Phone INFO" app. CSC changer apps do require root access, and they do not work on all phones and all versions of Android.
Hit thanks if it helps !
P.S. IT ONLY WORKS ON STOCK ROM ...! so you need to be on Stock Rom.
Click to expand...
Click to collapse
Thanks for your help. I tried solution 1 and it Worked
However, before trying out your solution, my device was in this state:
1. Flashed Singapore ROM
2. Extracted every file from Indian rom and repacked the tar except the system.img (as this was failing to flash in odin)
3. After booting I got a notification from SupportAgent telling me that unauthorized changes have been made, tap here to reboot to undo those changes
4. I then read your solution and updated the CSC to INS from STH. And device got factory reset and for the first time I saw VoLTE logo on my phone :victory:
5. I finished the setup and still getting the same error in notification from SupportAgent. So I tapped on it, and device rebooted to a new blue screen with sim card logo on it and then boot up to system.
6. Now, in the quick settings, VoLTE toggle is gone and I got WiFi Calling toggle instead. However I still have the VoLTE icon on the status bar.
7. So later that day, I redo all the steps.
- Flashed Singapore firmware (This time, the CSC Country was Singapore and the active CSC was XTH instead of STH. There was VoLTE toggle)
- Flashed Cache from Indian Firmware (CSC Country changed to India the active CSC was INS automatically. Now got WiFi Calling toggle)
8. I noticed other changes in the software:
- The gallery App doesn't show Grid view so I'm stuck with List view
- The Samsung Pay says, its not supported for this device
What do you think about this?

ksbalajee said:
Thanks for your help. I tried solution 1 and it Worked
However, before trying out your solution, my device was in this state:
1. Flashed Singapore ROM
2. Extracted every file from Indian rom and repacked the tar except the system.img (as this was failing to flash in odin)
3. After booting I got a notification from SupportAgent telling me that unauthorized changes have been made, tap here to reboot to undo those changes
4. I then read your solution and updated the CSC to INS from STH. And device got factory reset and for the first time I saw VoLTE logo on my phone :victory:
5. I finished the setup and still getting the same error in notification from SupportAgent. So I tapped on it, and device rebooted to a new blue screen with sim card logo on it and then boot up to system.
6. Now, in the quick settings, VoLTE toggle is gone and I got WiFi Calling toggle instead. However I still have the VoLTE icon on the status bar.
7. So later that day, I redo all the steps.
- Flashed Singapore firmware (This time, the CSC Country was Singapore and the active CSC was XTH instead of STH. There was VoLTE toggle)
- Flashed Cache from Indian Firmware (CSC Country changed to India the active CSC was INS automatically. Now got WiFi Calling toggle)
8. I noticed other changes in the software:
- The gallery App doesn't show Grid view so I'm stuck with List view
- The Samsung Pay says, its not supported for this device
What do you think about this?
Click to expand...
Click to collapse
are you still able to use voLTE ?? after these steps.
about Support agent. Ignore it if you can. or skip it. you do not need this as there aren't any official updates after this. (this is only because now system knows that you have modified it, and it will not receive any update. if you can the disable the Support agent app via settings or if possible via root.)
samsung pay will Not work. as knox should have been tripped to 0x1, so Samsung pay like apps will NEVER work after knox trip.

ksbalajee said:
Thanks for your help. I tried solution 1 and it Worked
However, before trying out your solution, my device was in this state:
1. Flashed Singapore ROM
2. Extracted every file from Indian rom and repacked the tar except the system.img (as this was failing to flash in odin)
3. After booting I got a notification from SupportAgent telling me that unauthorized changes have been made, tap here to reboot to undo those changes
4. I then read your solution and updated the CSC to INS from STH. And device got factory reset and for the first time I saw VoLTE logo on my phone :victory:
5. I finished the setup and still getting the same error in notification from SupportAgent. So I tapped on it, and device rebooted to a new blue screen with sim card logo on it and then boot up to system.
6. Now, in the quick settings, VoLTE toggle is gone and I got WiFi Calling toggle instead. However I still have the VoLTE icon on the status bar.
7. So later that day, I redo all the steps.
- Flashed Singapore firmware (This time, the CSC Country was Singapore and the active CSC was XTH instead of STH. There was VoLTE toggle)
- Flashed Cache from Indian Firmware (CSC Country changed to India the active CSC was INS automatically. Now got WiFi Calling toggle)
8. I noticed other changes in the software:
- The gallery App doesn't show Grid view so I'm stuck with List view
- The Samsung Pay says, its not supported for this device
What do you think about this?
Click to expand...
Click to collapse
i need to know too.. did volte worked after all? im doing the same thing but not working

prasadmanjulago said:
i need to know too.. did volte worked after all? im doing the same thing but not working
Click to expand...
Click to collapse
I have dropped that phone the very next day and got my screen shattered and entire display turned dark. I'm not sure whether it worked

ksbalajee said:
I have dropped that phone the very next day and got my screen shattered and entire display turned dark. I'm not sure whether it worked
Click to expand...
Click to collapse
There was a enfenforceskippingpackages.xml file.. deleted every line in there..it worked after..if anyone need more info, pm me or mail [email protected]

Note 9 SM-N960F/DS Firmware problem.

I have a Note 9 SM-N960F/DS model. I bought it from KSA (Saudi Arabia). The phone came with Android Pie (9) out of the box.
Unfortunately my friend rooted my phone and now i am running on "N960FXXU3CSFA/N960FOXM3CSFA/N960FXXU3ASF1" version with "Security patch level: 1 June 2019". I am unable to use my Samsung account and all the security features (finger print, Ratina scanner, Face recognition etc).
When i switch back to original firmware i.e
PDA N960FXXU3CSG1
CSC N960FOXM3CSG1
i got all the features functioning but my SIM card shows "Emergency calls only".
Any help will be highly appreciated. Thanks.

Eternal_Mortal said:
I have a Note 9 SM-N960F/DS model. I bought it from KSA (Saudi Arabia). The phone came with Android Pie (9) out of the box.
Unfortunately my friend rooted my phone and now i am running on "N960FXXU3CSFA/N960FOXM3CSFA/N960FXXU3ASF1" version with "Security patch level: 1 June 2019". I am unable to use my Samsung account and all the security features (finger print, Ratina scanner, Face recognition etc).
When i switch back to original firmware i.e
PDA N960FXXU3CSG1
CSC N960FOXM3CSG1
i got all the features functioning but my SIM card shows "Emergency calls only".
Any help will be highly appreciated. Thanks.
Click to expand...
Click to collapse
how did you "switch"?
give all the details step by step

bober10113 said:
how did you "switch"?
give all the details step by step
Click to expand...
Click to collapse
Well, My friend took my phone and told me that he will make it compliant with our local network and make it approved from the Telecommunication authority.
He has downgraded the phone with older firmware version i.e N960FXXU3CSFA/N960FOXM3CSFA,N960FXXU3ASF1. The security patch level is 1 June 2019
I have checked the Knox e-fuse which is not tripped which means its an official ROM and not altered.
Now, i have the latest firmware version downloaded i.e N960FXXS3CSG1 but when i try to install it in my phone it does not recognize my SIM card and phone is in "Emergency calls Only" state.

Eternal_Mortal said:
Well, My friend took my phone and told me that he will make it compliant with our local network and make it approved from the Telecommunication authority.
He has downgraded the phone with older firmware version i.e N960FXXU3CSFA/N960FOXM3CSFA,N960FXXU3ASF1. The security patch level is 1 June 2019
I have checked the Knox e-fuse which is not tripped which means its an official ROM and not altered.
Now, i have the latest firmware version downloaded i.e N960FXXS3CSG1 but when i try to install it in my phone it does not recognize my SIM card and phone is in "Emergency calls Only" state.
Click to expand...
Click to collapse
not sure how you check knox but if he really rooted then its too late and knox cannot state cant be reverted.
typically checking via software is not a good method . going to download mode and checking warranty state 0x0 means is not tripped. anything different means it been tripped/blown.
anyways that dosen't make you phone have no signal though.
i suspect he screwed up the twrp recovery flash procedure for twrp and botched the flash back to stock via odin.
read up on odin and how to use it. get latest version.(search and read)
read up so on how to get latest firmware for your phone and which csc your carrier is so that you can download the correct firmware and have best results for your sim carrier.( in doubt try BTU csc firmware)(but search and read about the subject of phone types firmwares and CSC)
also the firmwares your quoted seem old. not sure why you ended up using it but you should get one that is from july.
E.G.:
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/BTU/
(get the most recent! july 25th)( u can dl odin from there too)
on your PC, install samsung android drivers or simply install samsung smart switch. it will install the necessary components.
in it self smart switch can flash firmware automatically for your device. so you might want to try it first.
if you go towards the odin flash route and found the correct firmware or want to try BTU multi csc as suggested above:
put phone in download mode and unzip on PC firmware and flash with odin BL,AP,CP and CSC. But for csc choose csc.md5 instead of home_csc.md5
(be patient while AP is being checked before adding cp and csc)
edit: details steps on odin flashing procedure below
henklbr said:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.13.1
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.13.1
5. Power OFF Note9
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Note9!!!, push Bixby + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
last but not least don't listen to your friend or let him close to your phone again. reading and searching on xda is much better. everything has been already asked. you just need to search for it.
regards

bober10113 said:
not sure how you check knox but if he really rooted then its too late and knox cannot state cant be reverted.
typically checking via software is not a good method . going to download mode and checking warranty state 0x0 means is not tripped. anything different means it been tripped/blown.
anyways that dosen't make you phone have no signal though.
i suspect he screwed up the twrp recovery flash procedure for twrp and botched the flash back to stock via odin.
read up on odin and how to use it. get latest version.(search and read)
read up up how to get latest firmware for your phone and which csc your carrier is so that you can download the correct firmware and have best results for your sim carrier.( in doubt try BTU csc firmware)(but search and read about the subject of phone types firmwares and CSC)
also the firmwares your quoted seem old. not sure why you ended up using it but you should get one that is from july.
E.G.:
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/BTU/
(get the most recent! july 25th)( u can dl odin from there too)
on your PC, install samsung android drivers or simply install samsung smart switch. it will install the necessary components.
in it self smart switch can flash firmware automatically for your device. so you might want to try it first.
if you go towards the odin flash route and found the correct firmware or want to try BTU multi csc as suggested above:
put phone in download mode and unzip firmware and flash with odin BL,AP,CP and CSC. But for csc choose csc.md5 instead of home_csc.md5
(be patient while AP is being checked before adding cp and csc)
edit: details steps on odin flashing procedure below
last but not least don't listen to your friend or let him close to your phone again. reading and searching on xda is much better. everything has been already asked. you just need to search for it.
regards
Click to expand...
Click to collapse
Thank you so much for all the support. I will try this method today and will keep you posted if it worked out.

Eternal_Mortal said:
Thank you so much for all the support. I will try this method today and will keep you posted if it worked out.
Click to expand...
Click to collapse
i've the same problem with my SM-N960F i was using my sim card yesterday i updated it using odin and its not detecting it says not registered on network. Do you got any solution ?

Skyscout said:
i've the same problem with my SM-N960F i was using my sim card yesterday i updated it using odin and its not detecting it says not registered on network. Do you got any solution ?
Click to expand...
Click to collapse
I haven't try SmartSwitch for N9 but worth to try as it should be able to detect proper csc for your phone.
Else find the latest firmware for your phone with Frija/Samfirm then flash with odin.

Rosli59564 said:
I haven't try SmartSwitch for N9 but worth to try as it should be able to detect proper csc for your phone.
Else find the latest firmware for your phone with Frija/Samfirm then flash with odin.
Click to expand...
Click to collapse
i did it with odin coz smart switch didn't had its update my imei's are same but there's emergency only and it shows not registered on network whenever i try to call or text or cellular etc ..

Eternal_Mortal said:
I have a Note 9 SM-N960F/DS model. I bought it from KSA (Saudi Arabia). The phone came with Android Pie (9) out of the box.
Unfortunately my friend rooted my phone and now i am running on "N960FXXU3CSFA/N960FOXM3CSFA/N960FXXU3ASF1" version with "Security patch level: 1 June 2019". I am unable to use my Samsung account and all the security features (finger print, Ratina scanner, Face recognition etc).
When i switch back to original firmware i.e
PDA N960FXXU3CSG1
CSC N960FOXM3CSG1
i got all the features functioning but my SIM card shows "Emergency calls only".
Any help will be highly appreciated. Thanks.
Click to expand...
Click to collapse
well may be your friend tried to change IMEI of phone which is illegal in any country. Match your IMEI with box by dialing *#06#, if IMEI are same then no need to worry. you need to register your phone IMEI with PTA by paying tax. after paying tax they will whitelist the IMEI of your phone and you will be able to make calls.
just for information, my note 9 is also brought from Saudi Arabia, but at that time one device was free, so i got my phone registered by providing my travel details to PTA and they whitelisted my phone.

Please guide me solution.
I have just updated my sm-N960F/Ds through odin downloaded files from Sammobiles frimwares
Date 2021-03-08
Version 10
PDA
CSC
N960FXXS8FUB1
N960FOXM8FUB1
Now the device shows only one Imei and become single sim.
Hiw can i make it dual sim ??

Please guide me solution.
I have just updated my sm-N960F/Ds through odin downloaded files from Sammobiles frimwares
Date 2021-03-08
Version 10
PDA
CSC
N960FXXS8FUB1
N960FOXM8FUB1
Now the device shows only one Imei and become single sim.
How can i make it dual sim ??

How To Guide [GUIDE] How To Flash Official Samsung Unlocked BloatFree Firmware

Did you just get your shiny new S21 Ultra? And the first thing you noticed is tons of preloaded carrier apps that can't be deleted? This is how to fix that.
Convert your phone into the one that would come from Samsung directly with a simple firmware flash!
BACK UP YOUR PHONE! ALL DATA WILL LIKELY BE WIPED!
You will need an SM-G998U/U1/W
Computer running Windows
USB-C Cable for your PC to Phone
This is only for SM-G998U/U1/W
Step 1:
Download the ROM of your choice. The firmware number does NOT need to match your phone, as long as you have an SM-G998U/U1/W
From each link, click the latest firmware in the list (what ever the top one is) and on the page that loads, click the blue button that says "Download from website"
(You can only download one in a 24 hour period so choose U1 or W wisely)
SM-G998U1 (U1 is unlocked, no carrier bloat, US radio bands)
SM-G998W (W is unlocked, no carrier bloat, Canadian radio bands)
The only main difference between the two is the Canadian W Firmware supports all radio bands aside from (n260, n261), the file size is a little bigger and will take up a fractionally larger amount of space on your phone as a result of also including all CSC's, but will allow your device to connect to any tower frequency with the correct SIM.
The U1 Firmware supports all US bands and works across all Canadian carriers, but does not have any Carrier CSC's as a result of the smaller file size.
Thanks to @milan03 for the info
Best measure is to use the W Firmware as it will be supported, but if you are positive of your carrier will work and bands are the same as US carriers, use the U1 to save some space.
Step 2:
Download Odin 3.14.4 and Samsung USB Drivers
Step 3:
Extract all of the .zip files that you have downloaded, and install the Samsung USB Driver
Step 4:
On your S21 Ultra, enter download mode by turning the phone completely off.
Once the phone is off, hold the volume up AND down at the same time, and without letting go of those buttons, plug a USB cable in from the computer to the phone
Do not let go of the volume buttons until the Download Mode screen is displayed.
Step 5:
Open Odin and make sure the S21 Ultra comes up as one of the COM ports
If it doesn't try rebooting your computer, and then connect your phone again
Step 6:
Click the BL Button, and select the BL file you extracted from the Firmware .zip
Click the AP Button, and select the AP file (This will take awhile, do not touch anything, don't even click your mouse or try to do anything else on your computer, it can crash, just wait, make a coffee or something, because depending on your computer specs, it can take up to 5 minutes to load that file
Click CP and add the CP file
Now this last part here, you have a choice, however I strongly recommend you do not choose the second option at this time, however you CAN, but you might face stability issues.
When clicking CSC, you can EITHER add the CSC file, which is what I recommend, OR you can add the HOME_CSC file.
The differences between these files is that the CSC file will wipe your phone, but this is recommended, because when you are switching firmware's from a different carrier build, which we are right now, you want to delete anything left over that could conflict with the new firmware being flashed, however, you CAN flash HOME_CSC which will keep all of your user data on the phone, but this could leave old firmware files behind that could cause stability issues with your phone, crashes, force close apps, or even boot loops.
It's recommended to ONLY use HOME_CSC when you are UPGRADING on the same build (eg, if you are on SM-G998W and UPGRADING to another SM-G998W firmware)
So if you are going from U/U1 to W, it's recommended to use CSC, if you are going from W to W, Home_CSC should be fine, if you are going from W to U1, you should use CSC.
Step 7:
Once you have made your choice of either CSC or HOME_CSC, you can now click Start and it will start flashing the new firmware.
This process will take a fair amount of time, go relax and enjoy that coffee you made while the AP file was loading.
Once the flash is done, it will say Pass in green, and your phone will reboot automatically into your new official carrier bloat free firmware.
If you picked CSC, you can now setup your phone just like a new phone and restore your backup, if you picked HOME_CSC, you should be at your lock screen, and the phone is ready to use.
Congratulation, you are now on the Official Samsung Firmware with no carrier bloat as if you bought the phone directly from Samsung.
Troubleshooting:
If you used CSC and the phone did not pass and says FAIL, try the flash again with HOME_CSC, once the flash passes, you should be back at the lock screen, go to settings, search for reset, and do a factory reset, wipe all data because something did not flash correctly the first time so you need to wipe the phone after the successful flash to guarantee no stability issues.
If you used HOME_CSC and the phone did not pass, use CSC and the phone will be wiped when it flashes, and you need to set up your phone like new and restore your backup during the setup screen.
If it still fails to flash both CSC and HOME_CSC, Download Mode probably timed out from your computer taking too long, at which point, you can try doing Step 6 BEFORE Step 5.
Turn your phone off completely, load all of the files into Odin, THEN enter Download Mode and immediately click Start to start the flash. This will give you a little more time for your computer to make the flash and hopefully download mode will not timeout, if it still fails, try a faster computer or a different/shorter USB cable.
If you are with Bell in Canada and you did not get the pre-order bundle promo E-voucher prompt from Samsung Members App, flashing the SM-G998W firmware linked above will fix this and you can redeem your e-voucher and get your headphones and smart tag.
This is a video I made on the S20 Ultra for flashing One UI 3.0 Beta/Stable, however the process is identical, just use the files from here instead of the ones linked in the video description
I will be replacing this video with a dedicated S21 tutorial once I have have finishing editing the new video, but for now this will give you an idea of how it works until 5:30 in the video, after that it's mostly related to One UI 3.0 Beta/Stable for the S20 so there's no need to watch further than that as the S21 would be done by that point in the video.

Thank you sir.

So will this trip KNOX? My phone should get here next week (AT&T), and one of the first things I always want to do is get rid of the bloat.

JimmytheGeek said:
So will this trip KNOX? My phone should get here next week (AT&T), and one of the first things I always want to do is get rid of the bloat.
Click to expand...
Click to collapse
No problem with KNOX.
But majority of bloatwares are issued of CSC carrier brand and it is impossible to change csc without root or using samkey...
So this firmware will be like other versions with same samsung apps unless I'm wrong.

Thanks for the guide.
If I may, I'd like to post a correction on the state of the supported frequency bands on Canadian and the US firmware:
- The U1 firmware doesn't only support T-Mobile bands, it also fully supports AT&T and Verizon frequency bands, which includes their unique LTE carrier aggregation combinations as well as the 5G non-standalone combinations with n5 and mmWave. That's in addition to T-Mobile's combos with n71 and n41, in both non-standalone and standalone environment.
- At the same time the Canadian W firmware doesn't support all 5G bands, it completely disables mmWave (n260, n261), which means the US devices with this firmware won't be able to access this super-fast flavor of 5G on any US network. It also doesn't fully support all US 5G non-standalone combinations in FR1 (Sub-6 GHz) range.
Thanks again.

Chcolat-tiède said:
it is impossible to change csc without root or using samkey...
Click to expand...
Click to collapse
If you're running a multi csc firmware (the one's linked above) you can change your csc by opening the phone app and dialing *#272*YOUR IMEI NUMBER# and from there you can pick the firmware CSC and carrier CSC to be whatever preinstalled apps you want. The W firmware has all of the preinstalled which is why the file size is larger.
As for the Samsung bloat, they all come with it, but a lot of these should be able to be removed using ADB without root.
There are some ADB scripts around that some skilled people wrote for removing bloat apps in bulk through ADB without root.

bANONYMOUS said:
If you're running a multi csc firmware (the one's linked above) you can change your csc by opening the phone app and dialing *#272*YOUR IMEI NUMBER# and from there you can pick the firmware CSC and carrier CSC to be whatever preinstalled apps you want. The W firmware has all of the preinstalled which is why the file size is larger.
As for the Samsung bloat, they all come with it, but a lot of these should be able to be removed using ADB without root.
There are some ADB scripts around that some skilled people wrote for removing bloat apps in bulk through ADB without root.
Click to expand...
Click to collapse
Thanks for the info I will check.
I have a B/DS version, this manipulation unfortunately does not work on mine

Hello!
Thank for you posting this @bANONYMOUS. Question if I buy the the U1 model can I flash the W firmware? My father is in Canada and I'm getting an early Bday present for him. Making sure when he gets it, that it will have the correct bands for Rogers!

Is there any qualcomm firmware that has an FM radio app?

I purchased from the US and flashed the XAC firmware. The final result was XAC/XAC/XAA is that correct? I thought all blocs would be XAC.
Also, I wasn't sure if repartition should be checked or not so I unchecked it.
No VOLTE or WIFI calling on koodo.

I bricked my device today so I'm trying to flash stock OS.
I started flashing it in odin, but it seems it gets stuck on "<ID:0/010> vbmeta.img" for few minutes.
Not sure what is causing it, does anyone have any ideas?

Just tried this with u1. Failed each time

I'm trying to flash u1 onto TMB device. Keep getting failing with sha256 is invalid. Is there a modified odin 3.14.4 yet?

phucnukem said:
I'm trying to flash u1 onto TMB device. Keep getting failing with sha256 is invalid. Is there a modified odin 3.14.4 yet?
Click to expand...
Click to collapse
I get this as well

phucnukem said:
I'm trying to flash u1 onto TMB device. Keep getting failing with sha256 is invalid. Is there a modified odin 3.14.4 yet?
Click to expand...
Click to collapse
I am trying the patched 3.14.1 3b from here now
Download Latest Samsung Odin Tool v3.14.4 for Windows (2023)
Download the PatcheD and latest Samsung Odin v3.14.4 flash tool to install Samsung firmware binaries (AP, BL, CP, CSC files) on Windows PC.
technastic.com
Specifically I used Odin3 3.14.1 3B PatcheD.zip

tjsooley said:
I am trying the patched 3.14.1 3b from here now
Download Latest Samsung Odin Tool v3.14.4 for Windows (2023)
Download the PatcheD and latest Samsung Odin v3.14.4 flash tool to install Samsung firmware binaries (AP, BL, CP, CSC files) on Windows PC.
technastic.com
Specifically I used Odin3 3.14.1 3B PatcheD.zip
Click to expand...
Click to collapse
Update
I used home csc and went from Verizon FW to U1 (Newest firmware) all is good.

tjsooley said:
Update
I used home csc and went from Verizon FW to U1 (Newest firmware) all is good.
Click to expand...
Click to collapse
I got a VZW S21 ultra and was thinking of doing this. Do all of the Verizon features work, like wifi calling, hd voice, rcs? and unlocked features like caller id, samsung cloud, call and text on other devices?

krylon27 said:
I got a VZW S21 ultra and was thinking of doing this. Do all of the Verizon features work, like wifi calling, hd voice, rcs? and unlocked features like caller id, samsung cloud, call and text on other devices?
Click to expand...
Click to collapse
Wi-Fi calling in volte work. Samsung caller id it there and I was able to configure it. Cloud was as well. Call and text is and I configured it but my tablet does not support it yet.

tjsooley said:
Wi-Fi calling in volte work. Don't know how to test the other stuff
Click to expand...
Click to collapse
Well, based on what my unlocked note 9 has:
Under the phone app settings there should be a setting for caller id and spam protection
Under system settings in the accounts and backup section there is should be samsung cloud,
Under system settings in the connections section there should be call and messages continuity.
These are all options I have on my unlocked note 9, but not on VZW FW S21 Ultra

krylon27 said:
Well, based on what my unlocked note 9 has:
Under the phone app settings there should be a setting for caller id and spam protection
Under system settings in the accounts and backup section there is should be samsung cloud,
Under system settings in the connections section there should be call and messages continuity.
These are all options I have on my unlocked note 9, but not on VZW FW S21 Ultra
Click to expand...
Click to collapse
Wi-Fi calling in volte work. Samsung caller id it there and I was able to configure it. Cloud was as well. Call and text is and I configured it but my tablet does not support it yet.