Your warranty is Void, If anything happens to your device is solely your responsibility. This Rom is only tested on GT-I8200N.
Code:
First Backup Everythings-
DATA,SYSTEM,EFS,MODEM,RECOVERY
Flashing-Instruction From META-INF
#--INFORMATION
#--PREPARE DEVICE PARTITIONS
#--INSTALLATION
#--SYMLINKS
#--PERMISSIONS
#--KERNEL
#--CUSTOM SCRIPTS
#--FINISH
Click to expand...
Click to collapse
This is working for S3 mini I8200N for Devices.
This is stable Rom port form the Offical frameware.
NOTE FOR ALL
I DON’T ALLOW CHEFS/DEVS/THEMERS/COPY PASTERS TO USE MY FILES IN HIS ROM OR MOD
ROM INFO / FEATURES
1-Based on JellyBen-4.2.2
2-SU+SUbinary
3-Busybox
4-DE odexed
6-DE bloated
7-Zip aligned
INCLUDED THEMED APPS FROM STOCK-FRAMEWARE
SuperSU
Backup app
SystemUI
Calculator
Camera
Clock
InCallUI & Contacts
Galaxy Apps
4Email
Internet
Messages
Music Player
My Files
Voice
Settings
Video Player
Notes –
- Standalone flashable zip
- Rom includes XXUANL2-modem
Click to expand...
Click to collapse
Bug:-
no bug.
if find bug then post here
Click to expand...
Click to collapse
Code:
PORT FROM-OFFICAL-FRAMEWARE
Credits –
@Tecnicandriod for latest-recovery-v 3.2.7
Recovery-click on below link-->
latest-recovery-v 3.2.7-flash from-recovery not using odin
https://mega.nz/#!o44n2YqC!Y1DtSV5uuYDg-fO_o_tQJRKaX7YmHetFX8tmCQieT8s
Philz touch recovery-use odin for flash
https://mega.nz/#!woJETAqT!W0yN80XBXtRlJ8ffwFCimz-NVvoikKrWsK3-2knql58
Click to expand...
Click to collapse
LET'S GET THIS INSTALLED, THEN!!!
Turn off your S3 Mini
Turn it back on and enter recovery mode by pressing power button+home+ vol up
Wipe data and confirm with power button
Once done, pull the battery
Reboot to ODIN mode with vol down + home + power
Flash the Philz touch recovery-from ODIN, make sure the F.reset time and Auto reboot options are unticked
Pull the battery and go to recovery
Flash the ZIP and wait for it to complete.
ROM-LINK- https://mega.nz/#!ht5FnIJb!OZTX-PfGZ4rmlrU-XMeRzNCMrOQZ6s379aJOhHnSY0w
Click to expand...
Click to collapse
Reboot and enjoy (be patient, this one takes a bit longer to first-boot)
pandeyshreedhar said:
Your warranty is Void, If anything happens to your device is solely your responsibility. This Rom is only tested on GT-I8200N.
Flashing-Instruction From META-INF
This is working for S3 mini I8200N for Devices.
This is stable Rom port form the Offical frameware.
NOTE FOR ALL
I DON’T ALLOW CHEFS/DEVS/THEMERS/COPY PASTERS TO USE MY FILES IN HIS ROM OR MOD
ROM INFO / FEATURES
1-Based on JellyBen-4.2.2
2-SU+SUbinary
3-Busybox
4-DE odexed
6-DE bloated
7-Zip aligned
INCLUDED THEMED APPS FROM STOCK-FRAMEWARE
SuperSU
Backup app
SystemUI
Calculator
Camera
Clock
InCallUI & Contacts
Galaxy Apps
4Email
Internet
Messages
Music Player
My Files
Voice
Settings
Video Player
Credits –
@Tecnicandriod for latest-recovery-v 3.2.7
LET'S GET THIS INSTALLED, THEN!!!
Turn off your S3 Mini
Turn it back on and enter recovery mode by pressing power button+home+ vol up
Wipe data and confirm with power button
Once done, pull the battery
Reboot to ODIN mode with vol down + home + power
Flash the Philz touch recovery-from ODIN, make sure the F.reset time and Auto reboot options are unticked
Pull the battery and go to recovery
Flash the ZIP and wait for it to complete.
Reboot and enjoy (be patient, this one takes a bit longer to first-boot)
Click to expand...
Click to collapse
You should move the thread to the dedicated section, this is Q&A
i don't know how to move .. can you give me tips...
Hello @woodman bro can you move this thread to correct forum and can i also have author to move this thread and
also how to closed thread i don't know this process..
Sent from my GT-I9305 using Tapatalk
pandeyshreedhar said:
Hello @woodman bro can you move this thread to correct forum and can i also have author to move this thread and
also how to closed thread i don't know this process..
Click to expand...
Click to collapse
Only Admins can change stuff. You can delete here and post a duplicate in the dedicated forum.
hey @pandeyshreedhar,
one question: are you going to update/improve this rom further, or trying further to create a lineage rom
for this device?
that is not my work and not my project but i can handle and do many update for that Rom after some week..
i need someone who is ready to test and provide me screenshot and then i wll add his/her name in the work...
AND
that is correct link ------->>> https://mega.nz/#!EsYR3AzL!ecmndFpZjEb3SJN1jO7GQLvDYb7f1jhRd_Ukz9Vg4mQ
Sent from my GT-I9305 using Tapatalk
hello Guys can you help me to develop other Roms for I8200N/Q/L
I haven't that phone for few week because of repairing that phone
I can't test the any Rom develop by me in that phone. IF someone interest to help me then message here--->
I also add his/her name in the any Rom project.... give some @credit @help of his/her name in project
1. DEODEXROM-I8200N-ROOTED
The following error occurs when flashing with Philz and or TWRP Recovery:
PhilzTouch:
Code:
--Installing: /external_sd/DEODEXROM-I8200N-ROOTED.zip
Finding update package...
Opening update package...
Installing update...
E: Error in /external_sd/DEODEXROM-I8200N-ROOTED.zip
(Status 0)
Installation aborted.
press any key to continue.
E: Unable to create brightness sys file
TWRP:
Code:
Installing '/external_sd/DEODEXROM-I8200N-ROOTED.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
E:Error executing updater binary in zip '/external_sd/DEODEXROM-I8200N-ROOTED.zip'
Error flashing zip "/external_sd/DEODEXROM-I8200N-ROOTED.zip'
Updating partition details...
2. The Nougat Theme Stock Rom with Android 4.2.2 is the one from youtuber technicandro shree
I've tested it, but it's really annoying:
menu settings are Spanish but the rest in my mother tongue
Android 7 display in the menu is fake
Virtual buttons
AlphaAnimal said:
1. DEODEXROM-I8200N-ROOTED
The following error occurs when flashing with Philz and or TWRP Recovery:
PhilzTouch:
TWRP:
2. The Nougat Theme Stock Rom with Android 4.2.2 is the one from youtuber technicandro shree
I've tested it, but it's really annoying:
menu settings are Spanish but the rest in my mother tongue
Android 7 display in the menu is fake
Virtual buttons
Click to expand...
Click to collapse
this is a guide for the custom nougat rom, if you're interested:
I circumvented it by unpack illyrianking kernel zip, unpack philz touch recovery zip, going into odin, untick auto reboot, flash illyrianking kernel, reboot manually again into download mode, flash philz touch recovery.
boot into philz.
in philz: wipe to install a new rom
now the rom can be installed!
I can only confirm this working from stock to custom rom!
illyrianking kernel also makes the device faster & has more tuning options.
here are the files:
(illyrianking kernel usually also can be downloaded on androidfilehost)
AlphaAnimal said:
1. DEODEXROM-I8200N-ROOTED
The following error occurs when flashing with Philz and or TWRP Recovery:
PhilzTouch:
Code:
--Installing: /external_sd/DEODEXROM-I8200N-ROOTED.zip
Finding update package...
Opening update package...
Installing update...
E: Error in /external_sd/DEODEXROM-I8200N-ROOTED.zip
(Status 0)
Installation aborted.
press any key to continue.
E: Unable to create brightness sys file
TWRP:
Code:
Installing '/external_sd/DEODEXROM-I8200N-ROOTED.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
E:Error executing updater binary in zip '/external_sd/DEODEXROM-I8200N-ROOTED.zip'
Error flashing zip "/external_sd/DEODEXROM-I8200N-ROOTED.zip'
Updating partition details...
2. The Nougat Theme Stock Rom with Android 4.2.2 is the one from youtuber technicandro shree
I've tested it, but it's really annoying:
menu settings are Spanish but the rest in my mother tongue
Android 7 display in the menu is fake
Virtual buttons
Click to expand...
Click to collapse
thanks for bug i will maintain/solve that error...
or
can you also try with new twrpv3.2.7 or not???
this twrp is only flash from recovery and language is different..
thimprfct said:
me the same. I circumvented it by unpack illyrianking kernel zip, unpack philz touch recovery zip, going into odin, untick auto reboot, flash illyrianking kernel, reboot manually again into download mode, flash philz touch recovery.
boot into philz.
in philz: wipe to install a new rom
now the rom can be installed!
illyrianking kernel also makes the device faster & has more tuning options.
here are the files:
(illyrianking kernel usually also can be downloaded on androidfilehost)
Click to expand...
Click to collapse
[MENTION=227448]@thimprfc[MENTION] your method is work for this Rom or not???
If work then i will add this kernel in that Rom..
only for the nougat rom, unfortunately.
would be great if you add that kernel in the rom, I find it's the best.
it works for the nougat rom mentioned above & that has the same problem.
I only can confirm it working from stock to custom rom.
pandeyshreedhar said:
can you also try with new twrpv3.2.7 or not???
Click to expand...
Click to collapse
I've already tried, without success.
thimprfct said:
now the rom can be installed!
Click to expand...
Click to collapse
I am 100% sure that the kernel has nothing to do with flashing a custom rom. And since you haven't tested it either, I know the result.
The Nougat Theme Stock Rom I could also start with the Baroni Kernel.
pandeyshreedhar said:
that is not my work and not my project but i can handle and do many update for that Rom after some week..
i need someone who is ready to test and provide me screenshot and then i wll add his/her name in the work...
AND
that is correct link ------->>> https://mega.nz/#!EsYR3AzL!ecmndFpZjEb3SJN1jO7GQLvDYb7f1jhRd_Ukz9Vg4mQ
Click to expand...
Click to collapse
I will test.
---------- Post added at 11:39 AM ---------- Previous post was at 11:38 AM ----------
AlphaAnimal said:
I am 100% sure that the kernel has nothing to do with flashing a custom rom. And since you haven't tested it either, I know the result.
The Nougat Theme Stock Rome I could also start with the Baroni Kernel.
Click to expand...
Click to collapse
ok, I test it for you.
@pandeyshreedhar, @AlphaAnimal, you were so right,
back again. I've tested it & sorry, it did not work.
wish I could have told you something else.
but for the nougat rom it works. right done.
but I can only confirm it from stock to custom rom, not from custom to custom rom.
will edit the posts & describe it as a method for the nougat rom.
no, it's not a kernel thing, it only helps 'a little' sometimes, because it sets the binary to custom & that can sometimes help with flashing. the whole thing is more a recovery problem, this phone has much problems with custom recovery, unfortunately.
but the illyrianking kernel is nevertheless very good imho.
it was worth a try...
now you don't have to test it & be upset.
@pandeyshreedhar,
thank you for trying to create a bloat-free rom for this phone!
I haven't flashed it yet, but viewed the zip & it helped me a lot to figure out which apps & libs are bloatware, from which I never thought they were...
will the custom nougat rom, you'll create, be the same way?
I wll publish another link for fix rom flash error but i can'nt test that bocz of phone is in repair in progress..
So any one interset to test it or not????
First backup everything including all....
Sent from my GT-I9305 using Tapatalk
remove the error but not test from me..don't have phone right now..
test at your self
link---> https://mega.nz/#!nyJgyICC!7p3FMfVLG6D-AinIccKQa_NFRrcQVF_E78tNwa_kV3Y
Click to expand...
Click to collapse
pandeyshreedhar said:
remove the error but not test
Click to expand...
Click to collapse
Thank you very much. I'll try tomorrow and report back here.
The DEODEXROM has shrunk by 191MB. Is there a changelog for this?
Related
Hey, I bring to you the first Clockworkmod Recovery or commonly known as CWM for your N5100 and N5110. Giving your device the ability to flash your favourite custom ROMs, Kernels, Mods. *Now known as Advanced CWM or aCWM. Thankyou to 'xperiacle' and 'GSLEON3' for giving me the stock recoveries and kernels for N5100/10, so I could start off with my work.
Works perfectly now. OP will only be updated with stable releases, everything else will be floating around the thread.
I have provided the stock recovery if you encounter any issues, you can always flash back.
Featues:
Most things you would expect from stock CWM
EFS backup / restore
Removed option to: report error / show log / testkeys
More to come...
Downloads:
Use this if you are having problems with your SDCard. (Mount / Backup / Restore)
N5100 / N5110
Stable Release #1: ODIN | ZIP
Stock Recovery: http://d-h.st/tHx
N5120
Stable Release #1: ODIN
Stock Recovery: http://d-h.st/51H
Changelog:
Code:
[I][U]Stable Release #1[/U][/I]
Added reboot menu (rom, download, recovery)
Advanced CWM = aCWM
Code:
[I][U]Experimental #6[/U][/I]
Working EFS backup / restore under 'advanced' tab
Removed keytest / report error / show log options
Custom recovery, no more to be called 'stock' CWM, more device specific features to be added
N5120 support
Fix permissions now directed to /sdcard/.android_secure
Cleaned up some code for flashing zips
[I][U]Experimental #5[/U][/I]
[COLOR="Red"]REMOVED DUE TO ISSUES[/COLOR]
Touch recovery (reimplemented)
Universal for 5100 / 5110
Fixed up some mount lengths
Fixed up init.rc
[I][U]Experimental #4[/U][/I]
Display issues fixed
[I][U]Experimental #3[/U][/I]
Built again with fresh tree - n5110
(info: skipped for n5100)
[I][U]Experimental #2[/U][/I]
Touch Input excluded (temp)
kernel built from source with dancing cwm patch
[I][U]Experimental #1[/U][/I]
Public release
emwno said:
Hey, I bring to you, Clockworkmod Recovery or commonly known as CWM for your n5100. Giving your device the ability to flash your favourite custom ROMs, Kernels, Mods in the future. Thankyou to 'xperiacle' for giving me the stock recovery and boot.img. Flash with Odin
This has not been tested by me and is still experimental. I hold no responsibility for any
problems caused. YOU! Are trying this at your own risk. Don't blame me that I wasted your $$$.
Put a scare in you didn't I?
I have provided the stock recovery if you encounter any issues, you can always flash back.
Downloads:
CWM Recovery: http://d-h.st/rDv
Stock Recovery: http://d-h.st/tHx
Changelog:
Code:
[I][U]Release #1[/U][/I]
Public release
Click to expand...
Click to collapse
Thanks now we need one for the N5110.
rfb813 said:
Thanks now we need one for the N5110.
Click to expand...
Click to collapse
Just need to check if this works properly. If yes, then n5110 is up next
emwno said:
Just need to check if this works properly. If yes, then n5110 is up next
Click to expand...
Click to collapse
Thanks!
Thanks man, that was fast work
Sent from my GT-N5110 using Tapatalk HD
Southrice said:
Thanks man, that was fast work
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Nothing to be credited for, until the device boots to CWM
How do you flash this custom recovery with ODIN?, what version?, thanks
I flash the file 2 times and it said pass but when reboot to recovery is stock so I don't know what went wrong
Speedy Gonzalez said:
I flash the file 2 times and it said pass but when reboot to recovery is stock so I don't know what went wrong
Click to expand...
Click to collapse
How did you flash, Odin?
brosenz said:
How did you flash, Odin?
Click to expand...
Click to collapse
I added the zip to the pda area and flash Odin v3.07
I installed the image with ADB.
put the recovery image on the sdcard mount or ext sdcard mount
ADB to the note 8.0
su to root
go to your image directory
dd if=xxx.img of=/dev/block/mmcblk0p6
switch back to the note and reboot directly to recovery (i used goomanager)
it does boot the first time - but it is jittery and in landscape mode.
after the first system boot- the device wipes it and goes back to stock recovery.
I have seen this with other stock android devices- sometimes there
is a script that gets triggered on boot to remove any custom recoveries.
I did clear the recovery check from CWM - but it was hard to see because of the
landscape mode and the screen jumping around.
It looks like the full backup is working- now I wonder what ROM will be close enough
to the 8.0 to try flashing.
Speedy Gonzalez said:
I added the zip to the pda area and flash Odin v3.07
Click to expand...
Click to collapse
Any idea why it didn't flash with Odin?
@xbill9
Code:
adb pull /tmp/recovery.log
for fixes
Speedy Gonzalez said:
I flash the file 2 times and it said pass but when reboot to recovery is stock so I don't know what went wrong
Click to expand...
Click to collapse
Found this Q&A in the Note 10.1 rooting guide in RootGalaxyNote.com:
Q: I don’t see ClockworkMod Recovery when I enter recovery, I see stock Android recovery.
A: With newer software updates, you may be encountering this error because it will overwrite ClockworkMod Recovery upon reboot. To get around this, simply boot into ClockworkMod Recovery right after flashing in ODIN. You can set auto-reboot off in ODIN then when done, just hold down Power and Volume Down straight to bootloader menu.
This may have been the problem.
To get it to stop resetting to stock recovery every time you reboot, under /system, there is a file named "recovery-from-boot.p". Rename it to .bak or whatever. That file is typically the culprit for custom recoveries not 'sticking'.
Also, we don't have a factory image yet, do we? I'm hesitant to mess too much with this stuff until we have a way to Odin ourselves out of a softbrick.
---------- Post added at 11:45 PM ---------- Previous post was at 11:42 PM ----------
Also, to the OP, thanks for doing this. I'm pretty familiar with adb if you'd like to do TWRP. Would love to have it instead of CWM!
rfb813 said:
Q: I don’t see ClockworkMod Recovery when I enter recovery, I see stock Android recovery.
A: With newer software updates, you may be encountering this error because it will overwrite ClockworkMod Recovery upon reboot. To get around this, simply boot into ClockworkMod Recovery right after flashing in ODIN. You can set auto-reboot off in ODIN then when done, just hold down Power and Volume Down straight to bootloader menu.
Click to expand...
Click to collapse
Those having issues, try that ^^^
jntdroid said:
To get it to stop resetting to stock recovery every time you reboot, under /system, there is a file named "recovery-from-boot.p". Rename it to .bak or whatever. That file is typically the culprit for custom recoveries not 'sticking'.
Also, to the OP, thanks for doing this. I'm pretty familiar with adb if you'd like to do TWRP. Would love to have it instead of CWM!
Click to expand...
Click to collapse
Yeah, But i'd like to keep, just incase something goes insanely wrong. The stock recovery.img is provided, you can always flash back it something goes wrong. And i am readying up TWRP, may need you to pull some logs if it doesnt boot
jntdroid said:
To get it to stop resetting to stock recovery every time you reboot, under /system, there is a file named "recovery-from-boot.p". Rename it to .bak or whatever. That file is typically the culprit for custom recoveries not 'sticking'.
Also, we don't have a factory image yet, do we? I'm hesitant to mess too much with this stuff until we have a way to Odin ourselves out of a softbrick.
---------- Post added at 11:45 PM ---------- Previous post was at 11:42 PM ----------
Also, to the OP, thanks for doing this. I'm pretty familiar with adb if you'd like to do TWRP. Would love to have it instead of CWM!
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=GT-N5100
http://samsung-updates.com/device/?id=GT-N5110
I will be releasing a full Note 8.0 Toolkit today or tomorrow with support to rename the stock recovery restore files so that custom recovery isnt overwritten after flashing. If anyone wants to help test please email me at [email protected]
Mark.
Attached is a tar of recovery.log pulled with ADB while booted to CWM.
The display goes to landscape on boot - and the fonts seem extra large.
When the vol up/down navigates the screen jumps and you can't see the
highlighted option.
It is usable with trial and error if you know the order of the CWM menus and
use the vol up/down and power to navigate.
emwno said:
@xbill9
Code:
adb pull /tmp/recovery.log
for fixes
Click to expand...
Click to collapse
Only thing I can judge by that are the missing mount types for the recovery.fstab. Ill fix that now. But someone, try keeping the device physically portrait and see if cwm works properly then, if not then physically landscape.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
P.S try using touch input, its a touch recovery, or so I built it
^thats why fonts are large
^thats why there are no indicators
I tried changing orientation before boot - it always goes to landscape.
I attached 2 images - one is the display after the first CWM boot.
The second is after pressing Vol Up to navigate to the 2nd menu option.
I have seen jumpy CWM presentation like this on some smaller screens like the
Sony Xperia 2011/2012 phones.
emwno said:
Only thing I can judge by that are the missing mount types for the recovery.fstab. Ill fix that now. But someone, try keeping the device physically portrait and see if cwm works properly then, if not then physically landscape.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
P.S try using touch input, its a touch recovery, or so I built it
^thats why fonts are large
^thats why there are no indicators
Click to expand...
Click to collapse
IMPORTANT! This is NOT my work, all credits to the Genius chenxiaolong who made this available for all Galaxy S4 Variants
See original Thread [PATCHER][APP] Dual boot any ROM on all Galaxy S4 variants!
The Story:
I don´t like Touchwiz very much but for some Reasons I always have to come back to it. Maybe the Camera, sometimes the Allshare Features for Smart TV...Everybody has his Reasons to use/need it sometimes...
Untill today, I had to backup/restore between Sammy and Cyanogenmod a lot, It bugged me but I thought there is no choice till I found this Thread. First, I was a little afraid because there is a lot of Information in the OP and some stuff to do but then I thought, what may happen? Bootloop, Odin, Hard-brick,naaah, what´s Life without a little risk?
So I tried and it works !
If you want to do what I did, just follow these (very easy) Instructions.
Think about what your doing. This is your very own Device with your very own contract so please proceed at your very own risk! I have tested this exactly the way it is written down here and it worked. So if something goes wrong on your Device, don´t blame me or the Developer of this fantastic App!!
...Make sure your an owner of the international Samsung Galaxy S4 Active (i9295) (if not, tell me what happened )
...If your on a stock Sammy Rom, make sure that you are rooted and have a custom recovery installed...
...Also, you will need to delete some System Apps to free Space for secondary Rom but please don´t ask me which. There is enough Bloatware inside but a good start for me always is "HRS Hotels", "Google Maps/Mail/Plus" and so on...
1. Download the 3 Files from chenxiaolong´s Thread (not linked but you will find it...remember, this is NOT my work!)
- Dualboot Patcher
- Dualboot Switcher App
- Dualbootutility.zip
2. Download the custom Rom of your choice. In my case, I used
cm-10.2-20131227-UNOFFICIAL-jactiveltexx.zip
and official Gapps
3. Install the Dualboot Patcher and run it on your Device
4. Follow its Instructions to patch your custom Rom and, if needed, also the Gapps
5. Install the Dualboot Switcher App and run it
6. Set current Kernel as "Primary ROM´s Kernel"
7. Reboot into recovery
8. Flash your patched Rom File(s)
9. Reboot (the Device will NOW boot into secondary Rom!)
10. Install Dualboot Switcher App in 2nd Rom
11. Now you can choose between primary and secondary Rom to boot
12. Done
Please press THANKS in original Thread and, if you can, donate some to chenxiaolong because this is awesome!!!
Easy, isn´t it? Yes, it is. It is exactly what I was looking for because now I can use both worlds, the beautiful and the beast
English wasn´t my Mother´s language so please excuse me for mistakes you surely will find
Greetings
Thomas
I have uploaded patched Gapps and a patched Cyanogenmod Rom here. Feel free to use
cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot.zip
and
gapps-jb-20130813-signed_dualboot.zip
Greetings
Thomas
At what point to flash the 2nd ROM?
Hi,
To me the instructions are not very clear. At what point do I install/flash the 2nd rom. For example if my current ROM is CM10.2, how do I get a second rom (sammy) onto the phone?
Can you be a bit more precise on the steps?
Thank you very much
marcelser said:
Hi,
To me the instructions are not very clear. At what point do I install/flash the 2nd rom. For example if my current ROM is CM10.2, how do I get a second rom (sammy) onto the phone?
Can you be a bit more precise on the steps?
Thank you very much
Click to expand...
Click to collapse
Hey,
if you want to flash a Sammy Rom as 2nd Rom you need to have it as a flashable zip File (you will find them here in this Forum)
This should be the 2nd step in OP then, so just continue with the list
But don´t forget to delete some Files from /system of the Stock Rom to have enough Space for both Rom inside the /system Folder of your Device.
I hope that helped ?
Greetings
Thomas
ohwarumbloss said:
Hey,
if you want to flash a Sammy Rom as 2nd Rom you need to have it as a flashable zip File (you will find them here in this Forum)
I hope that helped ?
Greetings
Thomas
Click to expand...
Click to collapse
But i won't find a flashable zip of latest I9295XXUBML3 stock firmware in here? or can i make it myself (with Aroma)?
@d8389 posted mk3 here ( http://forum.xda-developers.com/showthread.php?p=45757227) and there are no big changes in ml3 I think.
But, why not flash Sammy as primary with Odin, makes things way easier
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
ohwarumbloss said:
@d8389 posted mk3 here ( http://forum.xda-developers.com/showthread.php?p=45757227) and there are no big changes in ml3 I think.
But, why not flash Sammy as primary with Odin, makes things way easier
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
Sorry for not understanding:
I would love to do precisely that, but that way i will loose root and have to re-install CMW-recovery won't I?
I will try to figure out the steps to take:
1. Reboot into CWM and install DualBootUtilities
2 .Set CM10.2 somehow as Secondary ROM?
3. Flash your already patched CM10.2 ROM and GAPPS on 2nd ROM
4. Somehow set 1st ROM active and connect in Download-mode to ODin and Flash I9295XXUBML3.tar.md5 ?
Going in the right direction ??
ZeroZorro said:
Sorry for not understanding:
I would love to do precisely that, but that way i will loose root and have to re-install CMW-recovery won't I?
I will try to figure out the steps to take:
1. Reboot into CWM and install DualBootUtilities
2 .Set CM11 somehow as Secondary ROM?
3. Flash your already patched CM11 ROM and GAPPS on 2nd ROM
4. Somehow set 1st ROM active and connect in Download-mode to ODin and Flash I9295XXUBML3.tar.md5 ?
Going in the right direction ??
Click to expand...
Click to collapse
Let's say you've set up a Sammy Rom completely including root and cwm recovery. The normal way as usual.
If you downloaded the already patched Files, place them somewhere you can find em.
Now, install and start the "Dualboot Switcher" app and set first Rom as primary.
Boot into Recovery.
Install the patched Files the normal way.
Reboot, phone will boot into second Rom now by default.
Once, second Rom has booted, install and run the "Dualboot Switcher" app again. Inside the App you can now choose which Rom to boot, then push reboot Button inside the App.
Done
I hope that helped but feel free to ask!
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
Thanks again for helping me/us...great!
Started with:
Rooted S4Active with cm-10.2-20131227-UNOFFICIAL-jactiveltexx, gapps-jb-20130813-signed and CWM installed.
1. Installed SwitcherApp in CM10.2
2. Reboot into recovery and flashed cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot and gapps-jb-20130813-signed_dualboot
- as you stated it reboots into 1st ROM and makes CM10.2 2nd
3. Rebooted into Download Mode
3. Used Odin 3.09 to install I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME.tar.md5
4. Rebooting now.... :fingers-crossed: I think it did not work. Looking at the Samsung glowing logo for some time now.
* This way i dit not remove files from /system so that could be the problem?
#FeelsLikeAlmostThere
ZeroZorro said:
Thanks again for helping me/us...great!
Started with:
Rooted S4Active with cm-10.2-20131227-UNOFFICIAL-jactiveltexx, gapps-jb-20130813-signed and CWM installed.
1. Installed SwitcherApp in CM10.2
2. Reboot into recovery and flashed cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot and gapps-jb-20130813-signed_dualboot
- as you stated it reboots into 1st ROM and makes CM10.2 2nd
3. Rebooted into Download Mode
3. Used Odin 3.09 to install I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME.tar.md5
4. Rebooting now.... :fingers-crossed: I think it did not work. Looking at the Samsung glowing logo for some time now.
* This way i dit not remove files from /system so that could be the problem?
#FeelsLikeAlmostThere
Click to expand...
Click to collapse
No, this way Odin will flash Sammy Rom and everything will be gone.
Now, after you flashed Sammy successfully, flash cwm recovery, root, delete some bloat and then (!) work down the list in OP
Then it will work. Without offense, you need to read more careful
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
ohwarumbloss said:
No, this way Odin will flash Sammy Rom and everything will be gone.
Now, after you flashed Sammy successfully, flash cwm recovery, root, delete some bloat and then (!) work down the list in OP
Then it will work. Without offense, you need to read more careful
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
Yup... indeed, found that out but i think i can use my Nandroid of CM10.2 once everything is set. :silly::cyclops:
ZeroZorro said:
Yup... indeed, found that out but i think i can use my Nandroid of CM10.2 once everything is set. :silly::cyclops:
Click to expand...
Click to collapse
Yes, of course but you could even try the procedure right now
Sent from my GT-I9295 using xda app-developers app
ohwarumbloss said:
Yes, of course but you could even try the procedure right now
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
LOL i think that won't work cause i put it on my Ext-SD so i first have to install the right CWM to access my Nandroid
But i will be fine, serious
I am just waiting for my apps to re-install...so i wondered...when i have 2 roms/dualboot, will the Samsung Update show me an update in the stock rom? So, like kitkat is coming next month? #ProbablyNot
Well... Back to single boot CM10.2 for now...
Didn't work out for me but I'll be back for a 2nd attempt soon.
Meanwhile: SammyStock won't update in dual boot setup (obvious)
Had to disable Knox along the way to be able to install some apps that required root privileges.
Sent from my GT-I9295 using Tapatalk 2
Before getting in the same mess as before:Using Nandroid restore will destroy the dualboot setup?
So titaniumbackup-restore is the way to go?
I am preparing a flasable zip of the latset firmware but i am not 100% sure it is working (still have some reading to do :laugh
Please correct me if i am wrong:
Stock-SammyROM (latest firmware: I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME )
1. Root with Odin
2. CWM-recovery with Odin
3. Enable Developer-mode
4. Disable Knox
5. Enable USB-debugging
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?)
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data
ZeroZorro said:
Before getting in the same mess as before:Using Nandroid restore will destroy the dualboot setup?
So titaniumbackup-restore is the way to go?
I am preparing a flasable zip of the latset firmware but i am not 100% sure it is working (still have some reading to do :laugh
Please correct me if i am wrong:
Stock-SammyROM (latest firmware: I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME )
1. Root with Odin
2. CWM-recovery with Odin
3. Enable Developer-mode
4. Disable Knox
5. Enable USB-debugging
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?)
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data
Click to expand...
Click to collapse
Yes, you are very close
I´d do it this way :
After a fresh install of your Sammy Stock Rom, let it set up. Then, turn of Device and restart into Download Mode
1. Root with Odin Flash this recovery with Odin
2. CWM-recovery with Odin After flash, Device will reboot, press Vol Up + Home, it will go into recovery
2a. Flash this from Recovery
2b. Reboot Device and Click on the SU App. Let it do it´s job (it will install stuff and disable KNOX)
3. Enable Developer-mode not needed
4. Disable Knox is done by SU App
5. Enable USB-debugging not needed
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?) not there in stock and not needed
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
10a. Apps like Google+, Maps, Samsung Bloat are good candidates for this as they are downloadable from store later or not needed at all
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data
Yes, there should be no Problems with TB even tho you´ll get warnings about SU. It works.
Good luck
Flashing in Step 1 and 2a the same file? Are you sure?
Or in Step2a CF-Auto-Root-jflte-jfltexx-gti9295.zip
ZeroZorro said:
Flashing in Step 1 and 2a the same file? Are you sure?
Click to expand...
Click to collapse
Of course not, sorry, give me one Minute lol
Edit: This is step 2a http://www.mediafire.com/?b0yud9r9pwq79aw
Sorry I was in a hurry!
Sent from my GT-I9295 using xda app-developers app
ZeroZorro said:
Flashing in Step 1 and 2a the same file? Are you sure?
Or in Step2a CF-Auto-Root-jflte-jfltexx-gti9509.zip
Click to expand...
Click to collapse
I've corrected the link above now, too
Sent from my GT-I9295 using xda app-developers app
Step 11 now...almost there...
Aargh... when trying to install the patched zip CM10.2 i get a Status 7 error
Went back and flashed CWM 6.0.4.5
But again...
------
NOT INSTALLING AS PRIMARY
symlink: some symlinks failed
E:Error in /data/media/0/Download/cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot.zip
(Status 7)
Installation aborted
-----
Any clue?
EDIT: Installing CMW 6.0.4.8 did the trick for me
Known CWM recovery, greatly improved with touch ui and many useful features by Phil3759.
Original Xperia T thread
Compatible with Rom Manager (reboot recovery, backup, install,...)
As the title says, this recovery has some needed modifications included, so you can use it with unmodified stock kernel (locked bootloader).
Main LB script with logging was created by cray_Doze.
My modifications are firstly based on recovery from davidmarco, then I found big help and better (PhilZ) recovery in [NUT]´s thread and that it´s better to unmount selinux fs so it cannot be redefined and checking files is probably stopped (?) in recovery, so I´ve had to use init binary that does not need selinux.
Installation:
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu
Upgrading from 4.1 with CWM for LB to stock 4.3:
1. Download stock 4.3 rom zip to SDcard
2. Download this recovery to SDcard
3. Reboot to 4.1 CWM and flash 4.3 rom
4. Flash this recovery (optionally flash SU too)
5. Power off the device
6. Flash 4.3 ftf - tick all wipes, and exclude system from installation or you will do it all again from scratch
Or if you already have some recovery on 4.3, just flash this in recovery.
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Changelog:
v1.7
- proximity sensor fix (with big help of steveboss and his V)
- reboot recovery working from all applications (quick settings, rom manager, recovery, etc.)(tested on T)
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.7.zip
Screenshots
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Good work, peetr_
Sent from Xperia V: uniQue 2.1.3 - touch of perfection
Awesome work bro
Sent from my LT30p using Tapatalk
peetr_ said:
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.3.zip
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Click to expand...
Click to collapse
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Oohhlala said:
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Click to expand...
Click to collapse
You can use backup and restore, this is a working version, just don't flash an update.zip made with the recovery (there is an option for creating that). For SuperSU CWM flashable zip look at the download section of the original SuperSU topic
Screenshots fyp
norti said:
Screenshots fyp
Click to expand...
Click to collapse
Thanks, I will add your post to OP.
Great work bro!
peetr_ said:
Thanks, I will add your post to OP.
Click to expand...
Click to collapse
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Oohhlala said:
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Click to expand...
Click to collapse
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
peetr_ said:
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
Click to expand...
Click to collapse
i've got bootloop , stuck in sony logo
Data wiped in flashtool? You can't even get to recovery? Blue led is shining??
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
Had this the other day trying to upgrade. If you can't get into CM, Use sony pc companion to bring it back - repair option
tested on TX 4.3 official stock system
and confirmed it works
both externel and internal storage can be used to flash
:highfive::highfive:
I found one bug (your mac address and other things are not restored after factory reset). I have it already fixed. I will upload fixed version today or tomorrow. There should be no need to do factory reset again, after installation of the fix.
First post updated with fixed import from TA after factory reset - 1.4 version.
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Oh, that looks like the reason. Sorry. I will edit the OP.
daniel090588 said:
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Click to expand...
Click to collapse
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Oohhlala said:
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Click to expand...
Click to collapse
Flash back a 4.1.2 rom with Flashtool, root it, put a cwm on it and continue with 'Upgrading from 4.1 with CWM for LB to stock 4.3' section of the first post You can find everything in the All in One post in the Q&A section of this forum.
Latest T-Mobile QF6 Nougat FirmwareGive this guy @umaro some thanks he worked on this until it became reality even when I gave up
T-Mobile S7 Edge Can Be Found Here
This rom will give you a modded nonrooted rom that will pass safetynet checks with working samsung pay. No lag because stock boot.img is used
Files To Download
TMO_G930_Odin_Firmware.zip
FlashFire_Flashable_G930T_Firmware.zip
TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip
ADB_Root_Flat_Files.zip
This will wipe your phone
1. Unzip TMO_G930_Odin_Firmware.zip use odin and flash these files
2. Go through setup unzip ADB_Root_Flat_Files.zip flash eng boot.img with odin then root
3. Unzip FlashFire_Flashable_G930T_Firmware.zip and copy the AP_FlashFire_Only_G930_QF6_Firmware.tar.md5 file to your phone
4. Copy TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip to your phone
5. Use flashfire choose add zip and choose TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip make sure to mount system
6. Then click add firmware and choose the AP_FlashFire_Only_G930_QF6_Firmware.tar.md5 file you copied to your phone. Select all partitions
7. Do not inject SuperSU
The flash order should be AP firmware then the rom zip
8. Click Flash
9. In aroma choose full wipe
First boot will take 10+ minutes too boot
Playstore Mods fixed
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
Bugs:
Do Not Use Package Disabler Or AdHell If You Choose NoNaMe Mods
Volume Panel Sliders Have A Bug With NoNaMe Mods
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
RomControl Source
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
Outstanding work. Thank you for this amazing rom.
jrkruse said:
This rom will give you a modded nonrooted rom that will pass safetynet checks with working samsung pay. No lag because stock boot.img is used
Click to expand...
Click to collapse
Thanks jrkruse for this , very much appreciated!
I just noticed your 930t post just now so I am very grateful and about to flash it.
I am currently on the previous ROM that you posted which is for the edge.
I had heavy lag after rooting due to the eng boot.img flashed on odin but after tinkering with L Speed, it's been much faster .
I'm going to do it over again using the 930t files you posted but I have a question if possible you can answer...
When you mention above thar there is no lag because stock boot.img is used... Does that only refer to the rom being flashed and not rooted ? Because of course the eng boot.img I need to flash on odin is necessary to be able to acquire root and this would leave me in the end with lag due to having to flash that eng boot img. ..
im hoping I'm wrong..
is there a way to flash in odin the eng boot, acquire root , and then flash back the stock boot.img and perhaps leaving me rooted and on a stock lag free boot.img ?
I read through the entire edge thread and other places and was hoping a solution but It may not be possible or I'm just missing something obvious? I'd rather not deal with tweaking using lspeed or kernel auditor etc. But if rooting only possible way is to be stuck with the eng boot img i guess I'll take the risk..
Thanks again !:good:
suddene said:
Thanks jrkruse for this , very much appreciated!
I just noticed your 930t post just now so I am very grateful and about to flash it.
I am currently on the previous ROM that you posted which is for the edge.
I had heavy lag after rooting due to the eng boot.img flashed on odin but after tinkering with L Speed, it's been much faster .
I'm going to do it over again using the 930t files you posted but I have a question if possible you can answer...
When you mention above thar there is no lag because stock boot.img is used... Does that only refer to the rom being flashed and not rooted ? Because of course the eng boot.img I need to flash on odin is necessary to be able to acquire root and this would leave me in the end with lag due to having to flash that eng boot img. ..
im hoping I'm wrong..
is there a way to flash in odin the eng boot, acquire root , and then flash back the stock boot.img and perhaps leaving me rooted and on a stock lag free boot.img ?
I read through the entire edge thread and other places and was hoping a solution but It may not be possible or I'm just missing something obvious? I'd rather not deal with tweaking using lspeed or kernel auditor etc. But if rooting only possible way is to be stuck with the eng boot img i guess I'll take the risk..
Thanks again !:good:
Click to expand...
Click to collapse
Following The directions will get you a nonrooted custom rom that can be manipulated by adb such as deleting stuff or pushing files to system and will pass safetynet checks. If you want a rooted rom it means you have to have the eng boot.img. If you root the rom and and only flash back stock boot.img you will not have root but as soon as you flash back eng boot.img you will have root again. but doing this breaks safetynet
Is it possible to delete the TMO boot sound with adb?
sabresfan said:
Is it possible to delete the TMO boot sound with adb?
Click to expand...
Click to collapse
See this post
Modded systemui volume panel fixed. Must flash AP file with rom
TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip
jrkruse said:
Modded systemui volume panel fixed. Must flash AP file with rom
TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip
Click to expand...
Click to collapse
Thank you for your continued support for us on the S7 flat.
I'm having issue playing video through flash player. For example, I can play youtube video through youtube app fine however if I play it through chrome or samsung browser is does this weird loop at any position in time of the video. Let me know if anyone else is having this issue. I installed rom but didn't install any of the mod of the mods. Wanted as close as stock possible. PS I did tried with mod and didn't like it and reflashed without mods.
Thanks in advance.
gundamdx said:
I'm having issue playing video through flash player. For example, I can play youtube video through youtube app fine however if I play it through chrome or samsung browser is does this weird loop at any position in time of the video. Let me know if anyone else is having this issue. I installed rom but didn't install any of the mod of the mods. Wanted as close as stock possible. PS I did tried with mod and didn't like it and reflashed without mods.
Thanks in advance.
Click to expand...
Click to collapse
It's the dual speaker mod try without that and all will work
@jrkruse,
Thanks. That is indeed the culprit. Reinstall rom without mods and remove system app through adb. Liking it. Thanks for all your efforts.
I am stuck in a bootloop when I install the stock kernel, but with the eng kernel it runs fine. Any ideas?
playingbball20 said:
I am stuck in a bootloop when I install the stock kernel, but with the eng kernel it runs fine. Any ideas?
Click to expand...
Click to collapse
Reread OP and post 2 you skipped something
Hi, nice work!, I have a quick question, can I install the rom without the mods? I just want to have root. If its possible, what steps I need to skip?
Thanks
ManuEZ said:
Hi, nice work!, I have a quick question, can I install the rom without the mods? I just want to have root. If its possible, what steps I need to skip?
Thanks
Click to expand...
Click to collapse
You can root but why not just root a stock Rom if you want no mods
Which file is the engboot.image?
DHackley said:
Which file is the engboot.image?
Click to expand...
Click to collapse
It's in the adb zip
Geizerjin said:
so this Rom has Modded Playstore? can i push modded apk thru adb with this rom?
Click to expand...
Click to collapse
The whole Rom is a customized stock nonrooted Rom. PlayStore and BSFree were my signature roms back in the day.
Playstore= almost all Samsung apps replaced with google apps that are found on the play store
BSFree= Highly debloated Rom with Samsung apps
NoNaMe= Systemui mods from that Rom.
You can choose whatever you want on install
My walkthrough
For amateurs like me, I put together some more detailed instructions. I hope this provides help for some users. Following the below steps I had no issues, it works great, and is very speedy. If there are any issues with my steps PLEASE correct me! I'm doing my best to contribute, not the opposite!
Thanks jrkruse, @umaro, and all others for this! So far I'm loving it!
My Steps:
1) ODIN (PC program) https://www.androidfilehost.com/?fid=24591023225177749
a. Setup:
-Make sure you have latest device drivers setup on your PC
-Enable USB Debugging on phone
-Boot phone into Download/Odin Mode: Turn off your device and press and hold Power button + Volume Down + Home. When you see the warning screen press Vol UP. Phone should say "Downloading..."
-Connect USB from PC to phone. ID:COM in Odin should turn Blue with a COM port
b. Unzip TMO_G930_Odin_Firmware.zip & select the (4) files from this zip (BL,AP,CP,CSC) in ODIN. Make sure all (4) get populated & selected
c. Options: Only these should be selected: Auto Reboot and F.Reset Time
d. Select START
e. When you get a green PASS! message in Odin, that means firmware has successfully been installed. Be patient as first boot may take a while
f. Exit ODIN
2) Phone Setup: After phone restarts for 1st time, go through setup as normal. (Ignore different carriers logos and SIM warnings)
3) ODIN: Restart phone back into Download/ODIN mode. Unzip ADB_Root_Flat_Files.zip, select ONLY AP_Nougat_S7_Flat_EngBoot.tar.md5, select START & wait for it to finish & restart phone
4) Gain Root:
a. Once phone comes back up, unzip ADB_Root_Flat_Files\Nougat_S7_Root_2_82_All_Carriers_V2.zip & Run root.bat. This will restart phone
b. After phone restarts, press key to continue install. I used options 2 & 1. Wait for phone to restart again. Should have root now.
5) FLASHFIRE/AROMA (App is now installed on phone via root script)
a. Unzip FlashFire_Flashable_G930T_Firmware.zip & copy unzipped file to your phone. Copy TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip to your phone. NOTE: Copy to internal memory NOT SD card.
b. Open FlashFire app on phone.
c. Choose + button, Flash ZIP, select TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip, select Mount /system option, touch checkmark button
d. Choose + button, Click add firmware & select AP_FlashFire_Only_G930_QF6_Firmware.tar.md5. Select all partitions, touch checkmark button
e. The flash order should be: Flash firmware package, then Flash ZIP. Everroot disabled. FLASH! Phone will restart into Aroma installer.
f. When phone comes up after script, select WIPE ALL DATA. (First boot will take 10+ minutes too boot)
---------- Post added at 07:45 PM ---------- Previous post was at 07:38 PM ----------
Curious (and looking to identify different tweak options), would I need to go through ALL the steps again in order to access the Flashfire/Aroma setup to pick different setups, like PlayStore or NoNaMe? Or is there a shortcut I could take?
Latest Ufirm QE2 Nougat Firmware For The S7 Edge Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G935U_QE2Files.zip
Mega Mirror Link
UFIRM_G935_Odin_Firmware.zip
Mega Mirror Link
FlashFire_Flashable_G935UFirmware.zip
Mega Mirror Link
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G935_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G935_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G935U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G935UFirmware.zip
7. Copy AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 to internal storage of your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip to internal storage of your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
You are a big @jrkruse and I love what you build I will install it in a couple of hours I will return thanks
Sent from my SM-G935T using XDA-Developers Legacy app
Can there will be a stock android custom rom?
---------- Post added at 08:23 AM ---------- Previous post was at 08:22 AM ----------
Thanks for your work ?
Hey man! Awesome that you've got a ufirm rom thread here too.. now I don't have to go to the verizon forums
umaro said:
Hey man! Awesome that you've got a ufirm rom thread here too.. now I don't have to go to the verizon forums
Click to expand...
Click to collapse
I just updated all the OP's of the Ufirms I forgot to give you a shoutout for your work. Thanks again I am sure Tmobile and ATT people will agree. Even gave the Flat Tmobile and ATT some new roms to play with
Gohar___Nadeem said:
Can there will be a stock android custom rom?
---------- Post added at 08:23 AM ---------- Previous post was at 08:22 AM ----------
Thanks for your work
Click to expand...
Click to collapse
Not sure what your asking. But yes there is a custom stock tmobile rom as well
Sorry for my bad english....
I'm asking that!
Like lineage Os ,resurrection remix any of that kind rom will be available for t-mobile in future?
Gohar___Nadeem said:
Sorry for my bad english....
I'm asking that!
Like lineage Os ,resurrection remix any of that kind rom will be available for t-mobile in future?
Click to expand...
Click to collapse
Probably not
I've tried to install twice so far. Both times I make it as far as Aroma installer getting to "Wiping Data" then phone reboots to Splash screen and just sits. Doesn't make it to boot animation. Tried rebooting, then booting to recovery and wiping cache, then tried factory reset, but nothing helped.
Are there any things I should avoid in Aroma options?
radoo7701 said:
I've tried to install twice so far. Both times I make it as far as Aroma installer getting to "Wiping Data" then phone reboots to Splash screen and just sits. Doesn't make it to boot animation. Tried rebooting, then booting to recovery and wiping cache, then tried factory reset, but nothing helped.
Are there any things I should avoid in Aroma options?
Click to expand...
Click to collapse
Did you flash the Verizon Odin files first. Then root. The flashfire AP and Rom zip
jrkruse said:
Did you flash the Verizon Odin files first. Then root. The flashfire AP and Rom zip
Click to expand...
Click to collapse
Yup, I did everything exactly as listed. Since there was no directions for Aroma, I was wondering if I was picking a wrong option there. I choose full wipe, TMo stock kernel, modded ui, but it always fails at Wipe when it starts to install.
radoo7701 said:
Yup, I did everything exactly as listed. Since there was no directions for Aroma, I was wondering if I was picking a wrong option there. I choose full wipe, TMo stock kernel, modded ui, but it always fails at Wipe when it starts to install.
Click to expand...
Click to collapse
So you never get through aroma installer?
jrkruse said:
So you never get through aroma installer?
Click to expand...
Click to collapse
I get thru the options, then hit install. Installer starts at Wipe, the my phone just reboots to Splash screen the nothing. 3rd try I picked No Wipe and still same thing.
Downloading TMobile version to try that one tomorrow.
radoo7701 said:
I get thru the options, then hit install. Installer starts at Wipe, the my phone just reboots to Splash screen the nothing. 3rd try I picked No Wipe and still same thing.
Downloading TMobile version to try that one tomorrow.
Click to expand...
Click to collapse
Are you choosing to mount system when you choose the rom zip with flashfire
jrkruse said:
Are you choosing to mount system when you choose the rom zip with flashfire
Click to expand...
Click to collapse
Yup. To the best of my knowledge I've followed every step exactly. It may be possible I have a bad download. My internet has been acting up. I'll try again later after I talk with my service provider tomorrow. Thanks
radoo7701 said:
Yup. To the best of my knowledge I've followed every step exactly. It may be possible I have a bad download. My internet has been acting up. I'll try again later after I talk with my service provider tomorrow. Thanks
Click to expand...
Click to collapse
Could you tell me each mod you chose so I can see if I can recreate the problem. Also is te AP and zip on your phone storage or sdcard
Edit:Also ceck the md5 of your download
jrkruse said:
Could you tell me each mod you chose so I can see if I can recreate the problem. Also is te AP and zip on your phone storage or sdcard
Click to expand...
Click to collapse
I picked full wipe, TMo stock kernel, modded ui, NoName boot animation. Most of the S8 apps and custom debloat. I tried the dual speaker mod the first 2 times but not the 3rd.
Both files are on my sdcard.
radoo7701 said:
I picked full wipe, TMo stock kernel, modded ui, NoName boot animation. Most of the S8 apps and custom debloat. I tried the dual speaker mod the first 2 times but not the 3rd.
Both files are on my sdcard.
Click to expand...
Click to collapse
Do you remember what you chose in custom debloat. I just want to run your same config and try. I would check that md5 use and md5 checker program then check it against Android file host generated md5 for file. If its bad there is no need in doing all this
jrkruse said:
Do you remember what you chose in custom debloat. I just want to run your same config and try. I would check that md5 use and md5 checker program then check it against Android file host generated md5 for file. If its bad there is no need in doing all this
Click to expand...
Click to collapse
I don't remember exactly. One of the times I just chose the minimal debloat option (70 apps, I think)
Anyway, I'll have to try again tomorrow after work.