? twrp-3.3.0-0-X00T-20190513.img
? 28.17 MB
?
Removed as requested by orginal devs:
Refer original thread here
https://forum.xda-developers.com/as...overy-unofficial-twrp-3-2-3-0-t3888110/page11
ChangeLog::::
#- Support for flashing unmodified stock firmware:victory:
- Updated base to android-9.0
- Updated blobs from 16.2017.1903.050
- Rebased kernel to S050 source drop
- Updated F2FS on kernel to 5.1-rc1
##Respect To Original Developers @krasCGQ
Noice, will try later, tried 4PDA's 3.3.0-0 but it doesn't support f2fs.
I tried flashing stable pie from oreo though this twrp but it says it's for x00_td and your device is x00_td [emoji849]
Sent from my ASUS_X00TDA using Tapatalk
does it support flashing modified stock rom without having to decrypt?
---------- Post added at 01:17 PM ---------- Previous post was at 12:53 PM ----------
Download link not working or removed
jide1 said:
does it support flashing modified stock rom without having to decrypt?
---------- Post added at 01:17 PM ---------- Previous post was at 12:53 PM ----------
Download link not working or removed
Click to expand...
Click to collapse
? http://bit.ly/2HiLH6I
#Re-uploaded to GDrive
Does he have the option to enter password to access recovery?
dougluna said:
Does he have the option to enter password to access recovery?
Click to expand...
Click to collapse
Not it doesn't
Can i flash ROM after Unlock & TWRP ?
I dont want to install magisk and decrypt
Because Latest Pixel Experience ROM has support to run banking application directly.
Mitul Varmora said:
Can i flash ROM after Unlock & TWRP ?
I dont want to install magisk and decrypt
Because Latest Pixel Experience ROM has support to run banking application directly.
Click to expand...
Click to collapse
Ofcourse you can:good:
akhil850 said:
? twrp-3.3.0-0-X00T-20190513.img
? 28.17 MB
? http://bit.ly/2HiLH6I #Re-uploaded to GDrive
Link Updated.?
ChangeLog::::
#- Support for flashing unmodified stock firmware:victory:
- Updated base to android-9.0
- Updated blobs from 16.2017.1903.050
- Rebased kernel to S050 source drop
- Updated F2FS on kernel to 5.1-rc1
##Respect To Original Developers @KudProjectCI
Click to expand...
Click to collapse
Do I still have to flash decrypt file? I'm running stock firmware, locked bootloader. In short I have not messed with my phone at all. Looking forward to install PE CAF ROM.
akhil850 said:
? http://bit.ly/2HiLH6I
#Re-uploaded to GDrive
Click to expand...
Click to collapse
Can you please post the direct link without the bit.ly shortening service. My hostfile and router blocks such monetising re-routeing methods....
Cookie Ninja said:
Can you please post the direct link without the bit.ly shortening service. My hostfile and router blocks such monetising re-routeing methods....
Click to expand...
Click to collapse
[ururl]
Notes From telegram group TWRP Update
Starting this build, recovery supports flashing stock firmware without modifying the updater-script. In order for it to be possible ,ro.product.device has to be set to ASUS_X00TD. This, however, breaks flashing of custom ROMs that check for either X00TD or X00T. I'll upload latest XenonHD build that can be flashed on this recovery.Simply supporting it doesn't mean that you can flash stock firmware directly; you need to be at least on stock when you flash the recovery, so required properties can be exported to /persist which then will be set on every recovery boot up.
Still not sure though, as some ROMs check for ro.product.device and then fallback to ro.build.product for matching devices.
Works, no problems. good job. Thank you
renda-l said:
Works, no problems. good job. Thank you
Click to expand...
Click to collapse
Hit thanks if it helped.
All credits goes to Respective Devs @kudProjectCI
akhil850 said:
twrp-3.3.0-0-X00T-20190513.img
28.17 MB
- Updated base to android-9.0
- Updated blobs from 16.2017.1903.050
- Rebased kernel to S050 source drop
- Updated F2FS on kernel to 5.1-rc1
Click to expand...
Click to collapse
can i flash to stock 340, android 8.1 ?
Yes
so, is this recovery able to flash FW that downloaded from asus website?
without single edit?
and what about encryption?
i'am planning to flash stock pie 0.53 from ressurection remix pie.
So can I just flash the full rom without modifying it?
123r4ka456 said:
so, is this recovery able to flash FW that downloaded from asus website?
without single edit?
and what about encryption?
i'am planning to flash stock pie 0.53 from ressurection remix pie.
Click to expand...
Click to collapse
Yes.
Also, I recommend stick with RR ROM ,Stock update is still a waste.
Related
Do Not Download And Flash
Euphoria OS ported from HLTE
For i9506, e330s, e330k
Hit thanks if you like my work
New version Includes arters kernel and fix files.
Okay Guys Found Solution for updater binary error, Flash CM12 and flash Euphoria Over it.
To Install the rom
-Method 1
-- Create a file named "devname.prop"
-- put the contents as devicename=i9506/e330s/e330k and put the file in the root of your storage(not the micro sd card)
-Method 2
--download the appropriate zip file for your device and extract the content inside the root of your storage(not the micro sd card)
example - If your device is i9506,
-download i9506.zip and extract devname.prop to your storage
Install Rom
E330K users still need to install Arters kernel after installation fix will be included in next update.
XDA:DevDB Information
[ROM]Euphoria OS 1.1 Port, ROM for the Samsung Galaxy S 4
Contributors
thefunnyone
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Beta
Stable Release Date: 2015-06-16
Beta Release Date: 2015-06-22
Created 2015-06-20
Last Updated 2015-06-22
Changelog
20/06/2015 - Initial Release
22/06/2015 - Fixed WiFi
ROM OS Version: 2.3.x Gingerbread <--- huh?
thefunnyone said:
uploading
Click to expand...
Click to collapse
Done
thefunnyone said:
Done
Click to expand...
Click to collapse
Im also working on a single file to use as kernel and fix file, the file needs a file inside your phone, including arters kernel.
Can't download I get a 410 error
coming from d3 wifi problem, flashed rom with twrp, arter 7.0.1-5.1 aosp, patch v2, pico gapps 5.1.
if no gapps are flashed nfc gives force closed rebooting after few seconds and again, and again
Are you fixing these problems as we all love a new developer on xda
bryanfeanor said:
coming from d3 wifi problem, flashed rom with twrp, arter 7.0.1-5.1 aosp, patch v2, pico gapps 5.1.
if no gapps are flashed nfc gives force closed rebooting after few seconds and again, and again
Click to expand...
Click to collapse
panda968 said:
Are you fixing these problems as we all love a new developer on xda
Click to expand...
Click to collapse
I find the download link
can you add some screenshots of this ROM, please? :good:
Edit: maybe not nede as it looks like stock android lollipop
I find the download link rom
---------- Post added at 05:18 PM ---------- Previous post was at 05:13 PM ----------
Where to download the rom
nick more said:
I find the download link rom
---------- Post added at 05:18 PM ---------- Previous post was at 05:13 PM ----------
Where to download the rom
Click to expand...
Click to collapse
Click where it says downloads up the top next to review
Ok thanks
No wifi here
Edit: No bluetooth and no brigthness adjustment.
pille1 said:
No wifi here
Click to expand...
Click to collapse
Okay Guys Good News is here : Fixed WIFI
I`d try this rom, but there`s very poor description in OP.
What is the base of the rom?
What are the known issues?
Some screenshots would be nice.
E: Error executing updater binary in zip '(Name of the file)'.
I have extracted i9506.zip in the root of my device.
With the Wifi fixed version.
BTW, well done porting this AWESOME rom to our device!
pille1 said:
E: Error executing updater binary in zip '(Name of the file)'.
I have extracted i9506.zip in the root of my device.
With the Wifi fixed version.
BTW, well done porting this AWESOME rom to our device!
Click to expand...
Click to collapse
thanks
i will try to port more roms too
u sure it is in sdcard/ partition
like sdcard/devname.prop
What kind of rom?
Sent from my GT-I9506 using XDA Free mobile app
What has happened to the original post? Will u upload a fixed version?
THIS IS NOT MY WORK , this is only for sharing purpose and to provide device specific guide.
ALL Rights goes to erfanoabdi, he is the real developer of this.https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
this ROM is ported from Android P-DP of Google Pixel XL (marlin) thanks to project treble
For review and installation video guide click here:
https://youtu.be/eV6W-t1QKp8
Requirements :
Qcom fully treblized device with 8.1 vendor
Redwolf recovery treble supported
Bugs Fixing :
important: mount vendor and system before flashing these files.
VoLTE fix(zip file):https://drive.google.com/open?id=14d5JJXMdJF6Gif0fWCwfSTAOIQjWrJt8
fingerprint fix(zip file) :https://drive.google.com/open?id=12ddmzZqCcLsdfYYQt21aLcrWPwLYsC5F
(on first boot after flashing fingerprint fix phone freezes, just reboot it again by pressing power button for 10 sec.)
wifi+bt fix:https://drive.google.com/open?id=1kpqAmquZuuliT97v7rnKm-2gE59x6Xv-
camera fix :https://drive.google.com/open?id=1eqJJhqm7z0_-vZbuMmmAXx8o9-6VPqxd
REMAINING BUGS:
WIFI and bluetooth cannot open at the same time.
Instructions : (you can also check video guide provided above)
1. download the latest 8.1 RR luis rom(treble).
2. Download latest andriod p gsi.img PR1 (A only) (this is a zip file you have to extract it to get .img file)
3. Download all the POST-sGSI(1,2,3) zips ,also download gsm.apk.
4. Reboot to recovery
5. flash RR luis rom 6.1 and wipe caches and data and reboot the rom.
6. now reboot in recovery mode.
7. click on install-- install image and select PsGSI.img (don't reboot)
8. Now Mount vendor in recovery
9. Flash POST-sGSI zips from 1 to 3 in priority
10. Reboot
On first boot your phone will give errors and it will be very laggy,,, do not panic.
install downloaded gsm.apk . it will fix errors and your rom will be super smooth.
DOWNLOADS:
RR luis rom v6.1(treble):http://luis-builds.de/downloads/lineageos/rr/Xiaomi_Redmi_4X_(santoni)/
Andriod p and post sGSI zips , incall.zip (total 4 files): https://androidfilehost.com/?w=files&flid=275999
(NOTE: downloaded pgsi img is a zip file you have to extract it to get .img file)
GSMCore apk :https://tinyurl.com/gmscore
good. guess we will see android P roms on our device after its officially released in a few months time.
No need to flash incall fix on our device
Can we disable the navbar?
Hi
Can we imagine some "P" custom roms we could flash directly, like other oreo/nougat roms ?
Flashing these system.img and other post gsi zips wont work on any other treble enabled rom ?
Angharad said:
Can we disable the navbar?
Click to expand...
Click to collapse
Yes, by adding line in buildprop
qemu.hw.mainkeys=1
---------- Post added at 03:39 AM ---------- Previous post was at 03:38 AM ----------
stevenlopes92 said:
Flashing these system.img and other post gsi zips wont work on any other treble enabled rom ?
Click to expand...
Click to collapse
What do you mean? I'm currently on this rom. This rom is great
---------- Post added at 03:41 AM ---------- Previous post was at 03:39 AM ----------
newbie_or_not_newbie said:
Hi
Can we imagine some "P" custom roms we could flash directly, like other oreo/nougat roms ?
Click to expand...
Click to collapse
Maybe u have to wait longer. Are you not familiat with treble?
its quite good rom for daily use if you will manage without VOLTE. Battery backup is decent and rom works as sooth as butter.
What do you mean? I'm currently on this rom. This rom is great
---------- Post added at 03:41 AM ---------- Previous post was at 03:39 AM ----------
Maybe u have to wait longer. Are you not familiat with treble?
Click to expand...
Click to collapse
Not so much... I see what it is, but can't realize what consequences for santoni, for custom roms.
newbie_or_not_newbie said:
Not so much... I see what it is, but can't realize what consequences for santoni, for custom roms.
Click to expand...
Click to collapse
If im correct, it means our devs have just to work on /vendor so we can flash gsi of ROMs that aren't built specific for santoni. Also updating hardware related things are completely independent of Rom Updates.
I understand more now, how difficult it is for devs.
Thanks for explanations.
Hey all i was saying is that now i am using treble enabled lineage os 15.1
Can i flash the system.img and other post gsi-zips above my base of lineage os , or is it mandatory to flash RR luis rom ?
stevenlopes92 said:
Hey all i was saying is that now i am using treble enabled lineage os 15.1
Can i flash the system.img and other post gsi-zips above my base of lineage os , or is it mandatory to flash RR luis rom ?
Click to expand...
Click to collapse
i got bootloops on my phone with lineage os15.1 vendor.
luis rom vendor works well with p gsi img.
i am using Los treble by swapnil bro, as base rom..
its working fine.. no issues at all..
dont neglect to keep Playstore apk ready after you boot, else it would be nuisance
Hi
the only problem that i have is that when i start Bluetooth, the wifi gets disabled and cannot stat until i stop BT
nandakis4 said:
i am using Los treble by swapnil bro, as base rom..
its working fine.. no issues at all..
dont neglect to keep Playstore apk ready after you boot, else it would be nuisance
Click to expand...
Click to collapse
Any calling problem bro?
anyone using as a daily driver?
MarcosJungbluth said:
anyone using as a daily driver?
Click to expand...
Click to collapse
Yup stable enough, some small bugs are there like cannot turn Bluetooth and WiFi on at the same time and YouTube seems to stutter.
Other than that everything works fine. Does heat up a little bit though.
I'm just trying DP4 and flashed all 3 zips after the GSI but the device doesn't sleep. Anyone else?
BT and WiFi at the same time isn't.possible, it seems.
meltbanana said:
I'm just trying DP4 and flashed all 3 zips after the GSI but the device doesn't sleep. Anyone else?
BT and WiFi at the same time isn't.possible, it seems.
Click to expand...
Click to collapse
disable ambient dispaly.
Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03
It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots
Nice, I will try it ASAP...
ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!
@ABM30 are you on telegram?
methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？
New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?
alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.
NFO:
• Only LG G6 H870 is supported
• Make Backups before use
Features:
Code:
• Made from official [B]LGH870AT-V30b-EUR-XX-NOV-05-2019+0.up[/B]
• Pre-rooted
- Removed [B]RCTD[/B]
- Removed [B]DM-Verity[/B]
- Removed [B]ForceEncrypt[/B]
Requirements:
• Unlocked Bootloader
• TWRP Recovery
Installation:
1. Reboot to Recovery
2. Backup System, Data & Boot(OPTIONAL)
3.1 For clean install: Full Wipe (System, Data, Cache & Dalvik-Cache)
3.2 You can also keep your Data by dirty flashing the ROM
4. Flash H870_V30B.zip
6. Reboot
Downloads:
H870-V30B.zip
Reserved #1
Thanks! Could you please summarize in just one sentence what are:
- RCTD
- DM-Verity
- ForceEncrypt
and what are de advantages/disadvantages of having them removed?
---------- Post added at 10:09 PM ---------- Previous post was at 10:09 PM ----------
Thanks! Could you please summarize in just one sentence what are:
- RCTD
- DM-Verity
- ForceEncrypt
and what are de advantages/disadvantages of having them removed?
alexrsj said:
Thanks! Could you please summarize in just one sentence what are:
- RCTD
- DM-Verity
- ForceEncrypt
and what are de advantages/disadvantages of having them removed?
---------- Post added at 10:09 PM ---------- Previous post was at 10:09 PM ----------
Thanks! Could you please summarize in just one sentence what are:
- RCTD
- DM-Verity
- ForceEncrypt
and what are de advantages/disadvantages of having them removed?
Click to expand...
Click to collapse
RCTD is a root checker tool made by lg that slows the system down when active so I removed it, dm verity doesn't allow the system files to be modified so I disabled it and forceencrypt is data encryption
Can i flash this in my h872 ??
Dev4up said:
Can i flash this in my h872 ??
Click to expand...
Click to collapse
No
Is it an update off 30a rom?
ghani mal said:
Is it an update off 30a rom?
Click to expand...
Click to collapse
yes he updated my v30a ROM to v30b
Hm.. even the build ID is the same with the same date as 30a.. I'm not sure there's anything different except for the letter "b".
ghani mal said:
Is it an update off 30a rom?
Click to expand...
Click to collapse
yes
Rifum said:
yes he updated my v30a ROM to v30b
Click to expand...
Click to collapse
no, I updated my v30a zip is made a while ago from the v30a beta
Arak0n said:
Hm.. even the build ID is the same with the same date as 30a.. I'm not sure there's anything different except for the letter "b".
Click to expand...
Click to collapse
yes there is, thermals have improved a lot this resulting in better performance
as you can see, Rifum stole my v30a zip and posted it on Reddit and xda without giving credit, check the date ffs
AlinM. said:
no, I updated my v30a zip is made a while ago from the v30a beta
Click to expand...
Click to collapse
AlinM. said:
as you can see, Rifum stole my v30a zip and posted it on Reddit and xda without giving credit, check the date ffs
Click to expand...
Click to collapse
I stole absolutely nothing wtf your ROM was based on the leaked up file while the one I made is from the official kdz
Rifum said:
I stole absolutely nothing wtf your ROM was based on the leaked up file while the one I made is from the official kdz
Click to expand...
Click to collapse
it's absolutely the same, just don't say I made the v30b based on your v30a
AlinM. said:
as you can see, Rifum stole my v30a zip and posted it on Reddit and xda without giving credit, check the date ffs
Click to expand...
Click to collapse
I think everything that was posted in that channel eventually was leaked to reddit/xda. Too bad people don't give credit where it's due. For my own curiosity, why don't you want it being "leaked"?
TheSaw said:
I think everything that was posted in that channel eventually was leaked to reddit/xda. Too bad people don't give credit where it's due. For my own curiosity, why don't you want it being "leaked"?
Click to expand...
Click to collapse
I don't really mind it being leaked, I just get mad because rifum posts it everywhere and gives himself credits
AlinM. said:
RCTD is a root checker tool made by lg that slows the system down when active so I removed it, dm verity doesn't allow the system files to be modified so I disabled it and forceencrypt is data encryption
Click to expand...
Click to collapse
Hello AlinM,
How did you remove RCTD, DM-verity and forceEncrypt?
Thank you in advance for the tip.
But why ther is not an ota update on my phone
ghani mal said:
But why ther is not an ota update on my phone
Click to expand...
Click to collapse
There is no OTA update if you rooted device, and this update is not released by LG, so you didn't receive it
nysa's pixel 3/3xl kernel builds
- Based on latest Android security patch from Google (30/06: 4.9.210)
- TCP BBR backports
- RCU, QoS and other subsystem backports
- 4.19 PELT load tracking
- Static image display power saving features
- Mainline scheduler backports to fix CAF mess
- CAF boosting removed
- kerneltoast's Simple Low Memory Killer
- Built with Proton Clang 11
- Other things that I can't remember
I'd highly recommend you use my Magisk module with this kernel to improve battery life and task placement: https://github.com/nysascape/pixel3-xl-powerhint
Be sure to join my Telegram channel: https://t.me/nysascapetg
Feel free to donate me a coffee: https://paypal.me/nysa17
Downloads:
Google Drive (boot.img, fkm zip)
My server
Franco Kernel Manager config for auto updates
Source:
https://github.com/nysascape/kernel_google_msm-4.9
Prebuilts:
https://github.com/nysascape/device_google_crosshatch-kernel
how do you install the magisk module?
and best way to install kernel?
thanks
BHermes21 said:
how do you install the magisk module?
and best way to install kernel?
thanks
Click to expand...
Click to collapse
Magisk patch the image through Magisk manager then use fastboot to flash it, using fastboot flash boot (name).img
When you've installed Magisk, just download the module and go into Manager and add it to modules.
does it support hbm?
high brightness mode
Your magisk module helps pixel 3 cool down a lot and save more power
I really appreciate.
gacky1601 said:
Your magisk module helps pixel 3 cool down a lot and save more power
I really appreciate.
Click to expand...
Click to collapse
Is the module for use with nysa kernel only?
mgp53 said:
Is the module for use with nysa kernel only?
Click to expand...
Click to collapse
you can use it on any kernel : )
gacky1601 said:
you can use it on any kernel : )
Click to expand...
Click to collapse
i doubt this is the case. the kernel would need to support the tuning parameters of the magisk module
drdrewdown said:
i doubt this is the case. the kernel would need to support the tuning parameters of the magisk module
Click to expand...
Click to collapse
Not true. The magisk module affects the powerhint.xml file which tells your power HAL what frequencies to boost your cpu/gpu to on certain tasks. It can be used with any kernel, I don't tweak anything that isn't part of the stock kernel
Edit: even this was misworded slightly, this tweak is completely independent of the kernel itself, and actually touches nothing inside the kernel.
hi there flashed your kernel with fkm....rebooted fine.....but now the screen does not respond to my touches. so i cant login with my passcode now what reflash a whole new system? help please
wulfgarfang said:
hi there flashed your kernel with fkm....rebooted fine.....but now the screen does not respond to my touches. so i cant login with my passcode now what reflash a whole new system? help please
Click to expand...
Click to collapse
That's strange, well just reflash Google's stock kernel. I haven't had this issue to be honest, if you're not using a June dtbo that could be the issue
nysascape said:
That's strange, well just reflash Google's stock kernel. I haven't had this issue to be honest, if you're not using a June dtbo that could be the issue
Click to expand...
Click to collapse
I have the same issue with the factory firmware. Flashing the regular boot.img did not solve the issue. Edit: flashing dbto.img as well did.
---------- Post added at 04:13 PM ---------- Previous post was at 03:44 PM ----------
wulfgarfang said:
hi there flashed your kernel with fkm....rebooted fine.....but now the screen does not respond to my touches. so i cant login with my passcode now what reflash a whole new system? help please
Click to expand...
Click to collapse
Did you flash 17-5-20.img, I did too by accident?
RagedElimanator said:
I have the same issue with the factory firmware. Flashing the regular boot.img did not solve the issue. Edit: flashing dbto.img as well did.
---------- Post added at 04:13 PM ---------- Previous post was at 03:44 PM ----------
Did you flash 17-5-20.img, I did too by accident?
Click to expand...
Click to collapse
Try flashing the dtbo found in the FKM zip.
Same issue as above, PixelDust CAF july 2020.
No touch in system or recovery, flashed via FKM bc TWRP boots and nothing else lol
unixandria said:
Same issue as above, PixelDust CAF july 2020.
No touch in system or recovery, flashed via FKM bc TWRP boots and nothing else lol
Click to expand...
Click to collapse
I had this same issue so, I decided to dirty flash the stock rom and touchscreen started working, flashed using FKM and once again touchscreen did not work.
I dirty flashed the stock rom once again, grabbed the IMG file and flashed it in fastboot and everything worked.
webleeper said:
I had this same issue so, I decided to dirty flash the stock rom and touchscreen started working, flashed using FKM and once again touchscreen did not work.
I dirty flashed the stock rom once again, grabbed the IMG file and flashed it in fastboot and everything worked.
Click to expand...
Click to collapse
I'm sure that works great on stock
However I'm not on stock as I already said
unixandria said:
I'm sure that works great on stock
However I'm not on stock as I already said
Click to expand...
Click to collapse
The point was to not use FKM but fastboot flash instead
webleeper said:
The point was to not use FKM but fastboot flash instead
Click to expand...
Click to collapse
Fastboot flash the boot image that won't work? Sounds great! I'll get on that
Hi is the kernel support android 11 ? Could this kernel use swap function?
unixandria said:
I'm sure that works great on stock
However I'm not on stock as I already said
Click to expand...
Click to collapse
Yeah most other kernels on here have one for stock an one for custom.
But works great for stock.