Related
This is a CM10 (Jelly Bean, Android 4.1.2) firmware for RAZR HD. It's not a official CyanogenMod, and it's not supported by CM team.
Disclaimer: THIS FIRMWARE IS IN BETA STAGE OF DEVELOPMENT.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
Click to expand...
Click to collapse
For now I only have how to test the XT925. I think this version will have problems with mobile data on XT926 dev edition (if it boots, dont know), because some patches not included in CM are needed to make it work, dhacker29 is working on the CDMA patches.
This firmware can be used with a unlocked bootloader or with safestrap.
Download links and information about what is working can be found on the website:
http://www.linuxmobile.org/razrhd
Instructions:
Download the zip (cm-10-*-UNOFFICIAL-epinter-xt925.zip) and copy to your sdcard.
Boot into recovery.
Backup your firmware and data!
Install the firmware (install zip from...).
Install gapps (install zip from...).
Wipe data/cache.
Reboot.
Thanks dhacker29 for collaboration
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good work!
I can't try it currently, I need my wifi... :$
Do you know if Play Store works ?
I know you must write this
Disclaimer:
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone
Click to expand...
Click to collapse
But it scares me a little
So I'm guessing this doesn't work for cdma version because there's no unlocked boot loader for cdma right?' I have a safe strap and a custom Rom on now but no unlocked boot loader x and there's no other kernal so I guess that's why we need unlocked loaders.
CDMA is XT926 no ? they don't have the same radio, you can't use GSM roms on CDMA phone and vis versa...
Epinter,
I'm new to Motorola as a brand, but not to CWM, unlocked bootloaders or custom ROMs. I asked you on the CWM thread on what to press in order to have the CWM menu. As soon as someone tell me, I will test your ROM, as I don't need for now my camera or WiFi.
I have an unlocked bootloader, XT925 model and when I press power and vol +/- I boot to the stock Motorola recovery. I followed the instructions on the CWM thread to load it using mfastboot, but I can't load CWM after a reboot.
Thank you very much for your help.
Edit: Nevermind, I found the answer here http://www.theandroidsoul.com/twrp-and-clocworkmod-cwm-recovery-for-motorola-droid-razr-hd-xt926/
I will try CM10 now.
Also, you mentioned that call service was broken. Is it already fixed on this version? I can live without Wifi or camera, but can't live without voice calls.
Thank you.
estuardo4 said:
Also, you mentioned that call service was broken. Is it already fixed on this version? I can live without Wifi or camera, but can't live without voice calls.
Thank you.
Click to expand...
Click to collapse
Voice call is working.
Orphee said:
Good work!
I can't try it currently, I need my wifi... :$
Do you know if Play Store works ?
I know you must write this
But it scares me a little
Click to expand...
Click to collapse
Don't be scared, make all backups you can.
Play Store works.
Great !!!!
Just need wifi/(camera)/(thetering) ^^ What about hardware acceleration ?
It work with Safestrap Recovery ?
That's just wonderful epinter! Thanks. I'll give it a try (but can't keep it installed permanently since I rely exclusively on wifi...)
ROM: Stock ICS 4.0.4 (rooted)
Recovery: TWRP v2.2.2.1
I'm getting an error trying to flash CM10:
-- Install /external_sd/Download/cm10/cm-10-20121115-UNOFFICIAL-epinter-xt925.zip ...
Finding update package...
I:Update location: /external_sd/Download/cm10/cm-10-20121115-UNOFFICIAL-epinter-xt925.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "xt925" || getprop("ro.build.product") == "xt925" ||
getprop("ro.product.device") == "vanquish_u" || getprop("ro.build.product") == "vanquish_u" ||
getprop("ro.product.device") == "vanquish" || getprop("ro.build.product") == "vanquish"
assert failed: getprop("ro.product.device") == "xt925" || getprop("ro.build.product") == "xt925" || getprop("ro.product.device") == "vanquish_u" || getprop("ro.build.product") == "vanquish_u" || getprop("ro.product.device") == "vanquish" || getprop("ro.build.product") == "vanquish"
E:Error in /external_sd/Download/cm10/cm-10-20121115-UNOFFICIAL-epinter-xt925.zip
(Status 7)
Click to expand...
Click to collapse
Double checked /system/build.prop and ro.product.device is set to vanquish_u.
Any idea?
---------- Post added at 12:39 AM ---------- Previous post was at 12:25 AM ----------
All right, I googled the problem and it seems the best way to handle this is to get rid of the "assert" command in /META-INF/com/google/android/updater-script.
Let's try this...
---------- Post added at 01:09 AM ---------- Previous post was at 12:39 AM ----------
For those wondering, the zip file needs to be updated; NOT extracted / re-zipped.
What I did (on Debian):
7za x cm-10-20121115-UNOFFICIAL-epinter-xt925.zip META-INF/com/google/android/updater-script
kate META-INF/com/google/android/updater-script [remove the assert line]
7za u cm-10-20121115-UNOFFICIAL-epinter-xt925.zip META-INF/com/google/android/updater-script
Click to expand...
Click to collapse
---------- Post added at 01:13 AM ---------- Previous post was at 01:09 AM ----------
First boot... "CyagenMod" cycling logo... for 5 minutes... seems to be stuck somehow...
Fed up with waiting any longer... Forcing reboot... Same story... Stuck on CyagenMod cycling logo...
madmonkey57 said:
ROM: Stock ICS 4.0.4 (rooted)
Recovery: TWRP v2.2.2.1
I'm getting an error trying to flash CM10:
Double checked /system/build.prop and ro.product.device is set to vanquish_u.
Any idea?
---------- Post added at 12:39 AM ---------- Previous post was at 12:25 AM ----------
All right, I googled the problem and it seems the best way to handle this is to get rid of the "assert" command in /META-INF/com/google/android/updater-script.
Let's try this...
---------- Post added at 01:09 AM ---------- Previous post was at 12:39 AM ----------
For those wondering, the zip file needs to be updated; NOT extracted / re-zipped.
What I did (on Debian):
---------- Post added at 01:13 AM ---------- Previous post was at 01:09 AM ----------
First boot... "CyagenMod" cycling logo... for 5 minutes... seems to be stuck somehow...
Fed up with waiting any longer... Forcing reboot... Sames story... Stuck on CyagenMod cycling logo...
Click to expand...
Click to collapse
Did you wipe the /data ?
Ouch... Almost out of battery... Restoring backup... Will give CM10 another try later...
---------- Post added at 01:26 AM ---------- Previous post was at 01:24 AM ----------
epinter said:
Did you wipe the /data ?
Click to expand...
Click to collapse
I think you got it... I wiped cache/dalvik but forgot data... n00b mistake... I'll give it another shot this week end.
i did a full wipe, booted within 2 minutes.
---------- Post added at 06:37 PM ---------- Previous post was at 06:07 PM ----------
Just one thing. Gapps installed but no calendar is installed.
Sent from my XT925 using xda premium
---------- Post added at 06:39 PM ---------- Previous post was at 06:37 PM ----------
Just got Google calendar from Google play. All good.
Sent from my XT925 using xda premium
Alright... CM10 up and running... Voice seems to be fine. All in all very very smooth...
WIFI is indeed not working... Once you manage to nail the bugs down, I might keep CM10 permanently on my device.
In the meantime, I'll test it as much as I can considering that I don't have mobile data for now...
---------- Post added at 10:39 AM ---------- Previous post was at 10:36 AM ----------
Torch is not working ("failed unexpectedly" upon flash light activation).
---------- Post added at 10:48 AM ---------- Previous post was at 10:39 AM ----------
App drawer becomes unstable after playing a little with the phone... Keeps on switching back to home screen after a short moment (< 2s).
The more I use the phone, the more unstable the app drawer gets...
---------- Post added at 10:57 AM ---------- Previous post was at 10:48 AM ----------
Odd keyboard behaviour noticed in Messaging app. Upon creation of a new text msg, keyboard pops up and lets me enter a phone number in the "To" field. But once I switch to the "Message" field, keyboard disappears very quickly and I need to tap the "Message" field a few times to show the keyboard back... I can't reproduce this strange behaviour each time...
---------- Post added at 11:24 AM ---------- Previous post was at 10:57 AM ----------
In "Settings / Status bar", when using "text" instead of "Icon" for "Signal status style", it shows a long integer number... Not sure if that's the intended behavior (but this looks useless to me...).
---------- Post added at 11:32 AM ---------- Previous post was at 11:24 AM ----------
I don't know if Apollo is supposed to display thumbnails embedded in my locally stored m4a audio files, but it doesn't.
No controls within Apollo to start/stop/pause/forward/rewind??? I have to use the controls in the status bar.
---------- Post added at 11:41 AM ---------- Previous post was at 11:32 AM ----------
Applying live wallpapers does not work at all (or just a short moment), then reverts to the standard wallpaper.
---------- Post added at 01:51 PM ---------- Previous post was at 01:41 PM ----------
Now homescreen is getting unstable as well... Sliding left/right, then homescreen restarts.... Even standing by, untouched, seems to restart on its own from time to time.
I think I'm gonna have to reboot every couple of hours or so, homescreen/app drawer way too unstable.
---------- Post added at 02:16 PM ---------- Previous post was at 01:51 PM ----------
Bluetooth is not working, can't switch it on (similar to WIFI)
---------- Post added at 02:25 PM ---------- Previous post was at 02:16 PM ----------
After a reboot, I run of Apollo and play a song. Apollo gets stuck for about 10s. The system displays a message "Apollo is not reponding. Wait or Close? Upon Close, Apollo restarts and I can then play any song...
@epinter
Is such a report any useful? Do want to me to look into a particular direction?
madmonkey57 said:
@epinter
Is such a report any useful? Do want to me to look into a particular direction?
Click to expand...
Click to collapse
Yes, it's useful, I will save this. But now I want to focus on wifi and other critical bugs. The minor bugs I will try to debug later. Thanks very much!
The wifi it's being very hard to make work. I'm working on wifi with dhacker29.
EDIT: The wrong number showed in the signal isn't just a bug on the text signal configuration. The signal level it's not been reported correctly... Here the signal bars are always full...
epinter said:
Yes, it's useful, I will save this. But now I want to focus on wifi and other critical bugs. The minor bugs I will try to debug later. Thanks very much!
The wifi it's being very hard to make work. I'm working on wifi with dhacker29.
Click to expand...
Click to collapse
I understand.
Let me know if you need specific testing.
madmonkey57 said:
I understand.
Let me know if you need specific testing.
Click to expand...
Click to collapse
When you have a time to test again, add this line to your build.prop:
ro.telephony.ril_class=QualcommSharedRIL
This should fix the signal bug.
epinter said:
When you have a time to test again, add this line to your build.prop:
ro.telephony.ril_class=QualcommSharedRIL
This should fix the signal bug.
Click to expand...
Click to collapse
Will do.
And all through the house...
(Continue the story)
...not a poster responded...
---------- Post added at 11:49 PM ---------- Previous post was at 11:45 PM ----------
...not even to grouse.
---------- Post added at 11:57 PM ---------- Previous post was at 11:49 PM ----------
Though he'd waited 'til after Thanksgiving with care...
---------- Post added 12-25-2015 at 12:01 AM ---------- Previous post was 12-24-2015 at 11:57 PM ----------
...the OP's Christmas story went blank and threadbare.
EDIT
Reserved
I was on RR custom rom but the signal reception is so so week on it. Maybe this one will do the job.
Tx, dev!
---------- Post added at 05:48 PM ---------- Previous post was at 05:46 PM ----------
Look so polished! I like it!
Thread Closed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Information
Venom_8.1.0, Rom for the Samsung Galaxy J7
For support and help, here:
Device:
SM-G610 M, F, DS
Click to expand...
Click to collapse
Rom INFO :
- Deodexed
- Zipaligned
- BusyBox Support
- Knox Removed
- Debloated
Click to expand...
Click to collapse
Features_v5:
*Zip Instaler
-Root Explorer
-Goodlock (new)
-Galaxy App
-Game Launcher android P
-S9 Brower android P
-Spectrum Tunner (New-Performance)
-Night mode (By-Gollo)
-YouTube_Black
-Play! & Netfli
-Bike Mode
-Battery Calibration Pro
-Adaway
-Facial recognition
-Kernel edited (Optimized_Spectrum)
Click to expand...
Click to collapse
*App Android P "updated"
-Bixby
-Clock (Bug)
-Calendar (apply installation fix ADD-APP-PIE.zip)
-CamaraOTE]
-Contac
-Diler (bug-Setting)
*And More,…(Feature, and app… P).
Click to expand...
Click to collapse
*Venom v5, is super stable(Help and Support for Venom ROM),The battery will adjust with the test period, in a time of 6 to 7 days, in which the system stabilizes and the administrator of the equipment, finishes analyzing the use, Venom_v5 is 100% compatible with any custom kernel.
*I'm going to publish, Fix for VOLTE, for the Indian teams that use this service, so they should do the test of their operation, and they should inform in the forum....
Click to expand...
Click to collapse
Installation:
They must make a 100% clean installation.
Advance wipe
-dalvin /art cache
-System
-data
-internal store
-cache
(additional)
Format Data (option "YES") "all this is to not be in bootlogo .."
***The rom is already root, so just apply the installation .zip, then you can start safely to configure the computer.
I leave 2 more zip, which are to add the calendar app and clock of android foot and root magisk18.1, the same can be installed once you finish configuring the mobile (accounts and app).
To avoid bug in the play store, I recommend deleting app data (play store and play store services).
The recognition of root app, is a bit slow but it is working, if any app gives root start lag, you should only erase data and force closure of app, I have tried again.***
Click to expand...
Click to collapse
Fix_for_Bug:
*FIX VOLTE*
As the name implies, the fix contains, system VOLTE and CSC INI (container of languages of those regions).
Click to expand...
Click to collapse
Download Rom:
Link by Mega:
TWRP
Rom_Venom_v5(*Updating*)
Click to expand...
Click to collapse
Link by Driver:
Rom_Venom_v5
ADD_APP_PIE-fix
VOLTE_fix
Modem.bin
Click to expand...
Click to collapse
Donation:
To support me in my projects, here
Click to expand...
Click to collapse
Developer:
[email protected]
Contributors:
@samsung (Firmeware 8.1.0 TTT)
@Bode327
ROM OS Version: 8.1.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Oreo_8.1.0
Based On: Stock_Oreo_8.1.0
Version Information
Status: Stable
Current Stable Version: v3
Stable Release Date: 2018-11-26
Current Beta Version: 26-11-2018
Beta Release Date: 2018-11-26
Created 2018-11-25
Last Updated 2018-12-18
Remember, giving :good:thanks does not cost anything ..............
where?
---------- Post added at 05:49 AM ---------- Previous post was at 05:13 AM ----------
full thread please? i hope this rom has no bugs
---------- Post added at 06:26 AM ---------- Previous post was at 05:49 AM ----------
download links? is this topic updated?
---------- Post added at 06:27 AM ---------- Previous post was at 06:26 AM ----------
please add also screen capture thanks!
icodix said:
where?
---------- post added at 05:49 am ---------- previous post was at 05:13 am ----------
full thread please? I hope this rom has no bugs
---------- post added at 06:26 am ---------- previous post was at 05:49 am ----------
download links? Is this topic updated?
---------- post added at 06:27 am ---------- previous post was at 06:26 am ----------
please add also screen capture thanks!
Click to expand...
Click to collapse
all ur question the answer is right on this page cmon man!!!
androzen said:
all ur question the answer is right on this page cmon man!!!
Click to expand...
Click to collapse
sorry bro, but the thread was not updated lately. I come again for this thread and its already updated.
nice bro, always like your rom since fast stock
so smooth and fast rom! niceee love it <3
hmmm is there any bug?
icodix said:
so smooth and fast rom! niceee love it <3
Click to expand...
Click to collapse
thank for your quick review
downloading
Im searching for bugs but i think this rom doesnt have bugs because it come from stock
---------- Post added at 11:13 AM ---------- Previous post was at 11:11 AM ----------
Please help me about my fingerprint scanner because its not accurate. I need to fix it ;(
Great your job my friend thanks for all. its perfect.
Nougat firmware not support?
icodix said:
Im searching for bugs but i think this rom doesnt have bugs because it come from stock
---------- Post added at 11:13 AM ---------- Previous post was at 11:11 AM ----------
Please help me about my fingerprint scanner because its not accurate. I need to fix it ;(
Click to expand...
Click to collapse
****************************************************************
What model do you have? the rom the probe and works correctly the trace, test a clean installation, and use the root that leaves in the link, the root that leaves there is the only one that is compatible with the rom, like the twrp is super stable, for a Rom rapida the secret is a good installation, full wipe ....
I flashed this Rom on my device "J7 Prime 2 (G611F)". The Rom works perfectly. The Rom is stable, light and fast. The sound is high and clear. With this Rom I have not faced any problem. Thank you very much "[email protected]". You are a great dev.
Manu_Dream said:
I flashed this Rom on my device "J7 Prime 2 (G611F)". The Rom works perfectly. The Rom is stable, light and fast. The sound is high and clear. With this Rom I have not faced any problem. Thank you very much "[email protected]". You are a great dev.
Click to expand...
Click to collapse
****************************************
Incredible, I had not tried it on that model, thanks for using the rom .....
does anyone know if this rom had the battery callibration problem???
[email protected] said:
****************************************************************
What model do you have? the rom the probe and works correctly the trace, test a clean installation, and use the root that leaves in the link, the root that leaves there is the only one that is compatible with the rom, like the twrp is super stable, for a Rom rapida the secret is a good installation, full wipe ....
Click to expand...
Click to collapse
Im using Y variant .I think its a hardware problem. Do you have any ideas how to adjust the accuration of the fingerprint scanner? Any rom i flash its all the same
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
lor3tz said:
does anyone know if this rom had the battery callibration problem???
Click to expand...
Click to collapse
No battery problem trust me. I love this rom but the problem is my fingerprint scanner.
sdcard not working I used Kernell Oxygen to solve the problem also Samsonic account does not work omitted application and downloaded another version to solve the problem please solve in the next building
---------- Post added at 09:39 PM ---------- Previous post was at 09:31 PM ----------
sdcard not working I used Kernell Oxygen to solve the problem also Samsonic account does not work omitted application and downloaded another version to solve the problem please solve in the next building
---------- Post added at 09:40 PM ---------- Previous post was at 09:39 PM ----------
Copying links to clipboard does not work why
sooheb said:
sdcard not working I used Kernell Oxygen to solve the problem also Samsonic account does not work omitted application and downloaded another version to solve the problem please solve in the next building
---------- Post added at 09:39 PM ---------- Previous post was at 09:31 PM ----------
sdcard not working I used Kernell Oxygen to solve the problem also Samsonic account does not work omitted application and downloaded another version to solve the problem please solve in the next building
---------- Post added at 09:40 PM ---------- Previous post was at 09:39 PM ----------
Copying links to clipboard does not work why
Click to expand...
Click to collapse
I flashed this rom without any problem, all features are working fine. try to flash again with clean installation.
icodix said:
I flashed this rom without any problem, all features are working fine. try to flash again with clean installation.
Click to expand...
Click to collapse
Same with all working fine dunno how you flashed this rom its working fune
I found a bug the front flash camera not working
Model:G610F
Test Build Coming Soon
what's your name on telegram
When ?
---------- Post added at 12:28 PM ---------- Previous post was at 12:27 PM ----------
Is it today ?