My Mi5 was on MoKee rom (mashmallow), with encryption on(it seems to do the encryption the first time I boot MoKee rom, as I input a pin at the time). It seems to work fine: I had a PIN (call it P) set to unlock device. I need to input it every time I reboot device, and TWRP can also use it to decrypt data.
But it turns out I don't like Mokee and would like to use CM 13 instead. So today I booted into TWRP, wiped everything, and flash CM 13 stable build from 12202016. That goes well. First time boot CM 13, it ask me to set a PIN. I just used the same PIN (P). Now CM 13 boots fine. It will ask me PIN once on during boot process, and once more for first time unlock screen (from then on I can use fingerprint to unlock). Not sure why it need PIN twice, but at least I can live with it.
The problem is: now if I boot into TWRP, it will tell me 'PIN incorrect, failed to decrypt data. So I can only go into TWRP without access to data partition, which means it's useless. I have never set a different PIN other than 'P' on this device, so I'm not sure how I could progress with TWRP. I'm using lastest official TWRP for gemini (3.0.2-3). Anyone with more experience, please help. Many thanks.
--EDIT--:
Turns out I need to set "lock screen - input pin when booting" to 'On'. Then I only need to input PIN once during normal boot, and can use that PIN in TWRP to decrypt. It's not intuitive at all, but that solves the problem.
****ing TWRP, i wasted a lot of time on this fking bug
Same issue after new ROM installation
I own a Redmi Note 4 and had a pin (call it Q) that decrypted the data with no issues on startup as well as in TWRP decrypt. Now, recently I installed Resurrection Remix v7.0.0 Android Pie from v6.x.
Now whenever I try to open TWRP and decrypt with the pin Q, it says "decrypt failed" but it works whenever I reboot the device and it asks me to enter pin before startup.
I also could not find "Input PIN while reboot" in the settings, maybe due to new android version policy or because device is already encrypted.
Please help.
TWRP Version: 3.2.1-0
Log:
Updating partition details...
done...
Unable to mount storage
Full SELinux support is present.
Failed to decrypt data.
--EDIT--:
Just downloaded the latest TWRP (3.2.3-1) image from the official site, used "adb push <TWRP image> <location in device>", then "Install" and "Install Image" in recovery and it solved the issue. I used "/sideload" as device location to "adb push" because "/sdcard" wasn't mounted maybe due to encryption.
mrmathematica said:
Turns out I need to set "lock screen - input pin when booting" to 'On'.
Click to expand...
Click to collapse
what are you trying to say on this part? sorry i am lost
Here are the details of my issue,
When trying to encrypt through "Settings > Biometrics & Security > Encrypt device"
It shows an "encrypting" screen
Keeps working on encryption for 1-2 minutes
then Reboots
When I check status, it's not encrypted
Please help.
Also, other than the encryption issue, phone is functioning normally.
Note 8 Model: SM-N950F/DS
Android Ver: 9
Build: PPR1.180610.011.N950FXXUFDUE4
Kernel: 4.4.111-21737876
Knox Ver: Knox 3.2.1, API level: 27, TIMA 3.3.0
Rooting method: (Magisk, Twrp, Force encrypt disabler, KG/RMM lock remover)
twrp: twrp-3.5.2_9-0-greatlte.img
I attached the files used during rooting process.
As a reference, I am also adding the rooting process I followed.
----------------------------------------------------------------
Enable OEM unlocking from dev menu
Shutdown
Reboot into bootloader mode (hold Bixby + VolDown, then Power, all concurrently)
When bootloader appears, press Vol up to enable flashing mode
Run Odin, and connect phone, wait until connected com port is displayed
On Odin, select twrp image in “AP” field
On Odin, from options, unselect “Auto Reboot”
Start flashing. Wait until flash is “Passed”
Disconnect phone and close odin.
Reboot the phone into recovery mode (Warning: Failure to do so may trigger KG/RMM lock, which will lock down the phone for 7 days. It’s a safeguard against phone theft)
Shutdown from flashing mode (hold Bixby + VolDown, then Power, all concurrently)
As soon as the screen goes dark, release VolDown, while still holding Bixby and Power button, and at this moment, pres VolUp.
This should boot phone into TWRP recovery mode
Format /data partition (Format > Format Data)
Reboot > Recovery
Once recovery is complete, connect phone to computer
From Mount, ensure that MTP is enabled, and data partition is mounted
Data partition should be available on computer
In data partition, add
KG/RMM lock remover
Magisk
Force encrypt disabler
From TWRP, flash files in provided order
Phone is rooted
----------------------------------------------------------------
jeredralph said:
Here are the details of my issue,
When trying to encrypt through "Settings > Biometrics & Security > Encrypt device"
It shows an "encrypting" screen
Keeps working on encryption for 1-2 minutes
then Reboots
When I check status, it's not encrypted
Click to expand...
Click to collapse
I think the DM-Verity zip that you flashed has got something to do with re-encrypting your device. The zip is supposed to prevent re-encryption every time you boot your device.
Also TWRP won't work properly if you device is encrypted.
If you really want a rooted device with encryption then use the patch method with magisk.
Finally got it working! Required some brute force and two days of my time.
Thanks @spawnlives for the hint about DM-Verity zip. But, only removing the zip was not enough.
Here's how things worked out so far.
Trial series 1
Flash stock sim inserted (BL > AP > CP > CSC)
Flash TWRP
Format /data
Flash zips (KG/RMM lock remover, Magisk)
Boot system
Issue: Encryption doesn't work. Same as before (system works on encryption for a bit, reboots, not encrypted)
Additional issue: Region code got corrupted (got //BRI, instead of my region code XXV/XXV/BRI). Samsung refused to check for update due to invalid code (don't remember the specifics).
Magisk status (preserve DM Verity: off, preserve Force Encrypt: on)
Trial series 2
Flash stock with sim inserted (BL > AP > CP > CSC)
Boot system
1 issue fixed: region code is now valid
Flash TWRP
Flash zips from microsd (KG/RMM lock remover, Magisk)
Format /data and /preload
Boot system
Initialize (greetings > connect wifi > choose security scheme (pattern), choose secure startup)
Magisk status (preserve DM Verity: off, preserve Force Encrypt: on)
Notes
I noticed something strange. The Encrypt device option is now gone, and instead there is Secure startup, while I am not sure about the specific differences between these two options, the device appears to be encrypted on boot. Cause, it's asking for pattern on every startup (before activating cellular and other core features). Also, TWRP can not decrypt /data partition anymore.
Trial series 2 resolved my issue of having a rooted Android while still having the /data partition encrypted.
I guess, at least now my data is secured against device theft or loss, considering, thief has to erase the /data partition to use the device again. Please correct me if I am wrong.
Issues yet to resolve
On my OnePlus 3t, TWRP has a cool feature enabled, that can decrypt /data partition using pattern. I am not sure why TWRP on Note 8 doesn't prompt pattern for decrypting /data partition.
I encountered an error, "unable to find crypto footer". Could it be the reason? How could it be mitigated?
Data partition is encrypted. I can flash zip from microsd. But, didn't yet have the chance to check whether flashing another zip will trigger integrity violation during secure startup check (the step where I enter secure startup pattern).
Please help me with these issues.
Hello!
So recently I was able to install LineageOS 18.1 (GSI) + GApps on my Samsung Galaxy Tab A 8 (SM-T290) tablet and wanted to share how I did it. I noticed a lack of decent step-by-step guides to modding this tablet so I figure I'd share what I learned through scouring multiple threads and through multiple headaches. Fun fact: I also got this working with LineageOS 19 (GSI), however it ran pretty poorly and Android 12 is ugly as hell so why bother anyway? ALSO interestingly enough, you'll see I wrote [SM-T290N] in the title as well. That is the model of the Kid's Edition of this phone, which happens to be the one I had. So I can confirm this process works for the Kid's Edition of this tablet as well as the original.
Some Things To Note
Below I'll list the software/firmware I used in this process. You don't necessarily need to follow this exactly but I don't see any reason not to. The end result is a working install of LineageOS with GApps so if that's what you want I would just follow along step-by-step. ALSO I'm writing this from memory so if I make a mistake please let me know and I'll try and correct it.
Click to expand...
Click to collapse
What You'll Need
Your tablet
A USB Cable to connect your tablet to your PC
A 4GB+ MicroSD card
A Windows PC
Some patience
Instructions
Preparing Your MicroSD Card
1. Place the LineageOS 18.1 .img file from this thread (On SourceForge, there is a section below the files about the naming conventions and how they relate to the hardware of your device and configuration of your ROM. I used the lineage-18.1-20220315-UNOFFICIAL-arm64_bvS-vndklite.img.xz image for my device. If your device is slightly different, you can use Treble Info to determine what ROM you should use. Just make sure to use the VNDKLITE rom if your device supports it.
2. Place the multidisabler .zip folder on there as well. This will preserve encryption provided by TWRP after rebooting.
3. Finally, place the MindTheGapps .zip folder on your SD card (make sure to get the correct version. In my case this was the 11.00-arm64 version).
4. Insert your MicroSD card into your device.
Unlocking the Bootloader
So the first thing you're gonna want to do is unlock your OEM bootloader on your Samsung device.
1. Go to Settings->About Phone->Software Information and look for a field called "Build Number". Tap this Five Times until you see a notification saying developer settings were enabled.
2. Go to Settings->Developer Settings and look for the setting labeled OEM Unlock and turn it on.
If you don't see this setting try connecting to wifi, changing your date and time to around two months prior (I set mine to back to May 2021 since the firmware I was using was set in July 2021), then go back to your developer settings and switch them off and back on again. You should now see the OEM Unlock option.
Click to expand...
Click to collapse
3. From here, you can reboot your device into Recovery Mode by holding the Vol+ and Vol- buttons when the device begins to boot again.
4. You should see a blue screen with some options. Press the Vol+ button to enter Download Mode. This is where you'll use Odin to flash the firmware you need as well as TWRP.
Flashing Firmware
So when I attempted this process I used Magendanz's Unofficial TWRP 3.6.0 as it is the only version of TWRP I found for this device. I also used Odin v3.14.1_3B Patched from this XDA thread. Magendanz's TWRP requires you to have the T290XXU3CUG4 Firmware (I used the XAR region) in order to flash TWRP to your device (you can check wether or not you already have this firmware on your phone by looking the About Phone section again). It takes a while to download though make sure you have some time.
1. Download Odin and run the program. Unzip your firmware folder and use the relevant files when selecting the BL, AP, CP, CSC fields in Odin. I didn't use the HOME_CSC just leave it blank.
2. Connect your device via USB and Flash this firmware to your device.
3. Once your device restarts, go through the setup process and then repeat the Unlocking the Bootloader instructions above in order to make sure it is unlocked again.
4. Reboot your device the same way as stated above.
Flashing TWRP
Before starting, be aware that after you flash TWRP to your device, your device will restart and attempt to open the stock system again. You're going to want to hold the Power and Vol+ buttons simultaneously. You will likely get a warning screen saying that the bootloader is unlocked and may ask you to do a factory reset, this (I believe) is fine. The key here is that once you press the Power Button to continue (as instructed on the warning screen) you'll want to immediately press and hold the Power and Vol+ keys for around 6 Seconds before letting go again (you should be seeing the Samsung Galaxy Tab A logo screen). After letting go, wait around 3-4 seconds, if nothing changes, restart the device by holding all three buttons (Power, Vol+,Vol-) and attempt the process again. It's a pain in the ass but you'll get it eventually. Just make sure not to let the device boot into the system again as that can cause problems in TWRP and you'll likely have to start the process over (from flashing the firmware).
1. Once your tablet is once again in Download Mode, open Odin again and flash the TWRP (tar.md5 file) to the AP (recovery) partition. Do not use any of the other partitions.
2. If this is successful, your phone will begin to reboot. Quickly press and hold the combination of buttons Power and Vol+ until you see the warning dialog pop up. Once you do, release all buttons and be ready to quickly press and release the Power button continue, and then immediately after press and hold the Power and Vol+ buttons again for 6 seconds. After around 6 seconds, release all buttons. Wait around 3-4 seconds and, if the screen does not change to the TWRP logo, restart the device by pressing and holding all buttons simultaneously and try this step again.
3. If you have entered into TWRP, congrats!
Installing Custom ROM + Software in TWRP
1. The first thing you'll want to do is select the Wipe->Format Data. Type 'yes' and hit enter (or swipe I forget which).
2. Next, select Install, and then select your MicroSD card as your storage device. You should see your zip files (if not switch from the install image option).
3. Install the multidisabler, do not reboot
4. Go back into Install and select Install Image (might not be the exact naming) option. Select your MicroSD card as the storage device again and install the LineageOS 18.1 rom. Do not reboot.
5. Go back into Install and select your MindTheGapps zip file and install it.
Now, a lot of people run into a problem when trying to install Gapps which is your device complaining about no more available space in the system partition. If this is the case, go back to Wipe and select Advanced Wipe. Select your system partition and then select Change or Repair Partition. Once you're here you should see the size and available space of your partition. You'll want to hit Resize Partition and let it do it's thing. To confirm it worked, go back to Wipe->Advanced Wipe->Select System->Change or Repair Partition and your available space should be much larger now. Now just attempt to install MindTheGapps again.
Click to expand...
Click to collapse
Final Steps
Once you reboot you should be able to successfully reach the setup screen for Lineage. Go through the steps of setting up your device as usual and be sure that Gapps are installed. Go ahead and re-enable developer settings and enable USB-Debugging and Root Debugging. The reason for this is that, when I first installed Gapps, Google Play Protect would keep throwing warnings at me about my device not being Google Play Certified. This means I couldn't actually use any of the google play services. If you run into the same issue, here are the steps you can take to fix it:
1. First, go into Settings->Apps and find your Google Play Services app. Clear the cache and delete the app data, then reboot your device. If you try and sign into the Google Play store and you are able to without getting any play protect warnings, then you're good you can disregard the following steps.
2. If you are still receiving these warnings, you'll want to head over to this site and follow the instructions (I'm not gonna tell you how to use ADB here). Once you submit your framework ID, reboot your device. Everything should be working fine now.
And that's it! If I am forgetting any steps please let me know, again I am writing this from memory of the process so it may be missing some minor details. I hope this helps!!!
How's the stability, speed and the responsiveness on Lineage with a t290? I have mine rooted debloated and twrp installed but it is slow on stock OS
kkdamion said:
How's the stability, speed and the responsiveness on Lineage with a t290? I have mine rooted debloated and twrp installed but it is slow on stock OS
Click to expand...
Click to collapse
It runs surprisingly well! Much better than stock. There’s virtually no input lag and the battery life is also very solid on lineage.
Where i run into some lag is when trying to use apps that have embedded video in them. For whatever reason the T290 cannot handle video very well at all.
So yeah I would definitely recommend trying it, it’ll really breathe new life into that tablet
i cant get google play services to work and i cant fetch device_id to register the device
i get "no closing qoute" message
adb shell 'sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
/system/bin/sh: no closing quote
EDIT: downloaded "android device id" APK from the internet and gathered the framework id information from the app
kkdamion said:
i cant get google play services to work and i cant fetch device_id to register the device
i get "no closing qoute" message
adb shell 'sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
/system/bin/sh: no closing quote
EDIT: downloaded "android device id" APK from the internet and gathered the framework id information from the app
Click to expand...
Click to collapse
Glad it worked out for you! Let me know if you have any more questions and I'd be happy to help.
Hi! is this applicable also for SM-T295?
for those trying to figure out the Google Play Certified page with the adb command
Code:
adb shell 'sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
"select * from main where name = \"android_id\";"'
do : adb shell
first then paste in :
sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
"select * from main where name = \"android_id\";"
and it shouldn't give you the error
i must say. linageos on my sm-t290 is really nice
its fast and smooth way much better then stock fw
i would reccomend anyone with a t290/t295 to install this GSI
Im into a bootloop right now after a few fails with installing Lineage on my SM-T290..
Seems like i cant install any rom? not sure how to fix this issue, can anyone point me in the right direction?
Im able to get into TWRP and download mode. but cant install any rom?
thepalek1ng said:
Hello!
So recently I was able to install LineageOS 18.1 (GSI) + GApps on my Samsung Galaxy Tab A 8 (SM-T290) tablet and wanted to share how I did it. I noticed a lack of decent step-by-step guides to modding this tablet so I figure I'd share what I learned through scouring multiple threads and through multiple headaches. Fun fact: I also got this working with LineageOS 19 (GSI), however it ran pretty poorly and Android 12 is ugly as hell so why bother anyway? ALSO interestingly enough, you'll see I wrote [SM-T290N] in the title as well. That is the model of the Kid's Edition of this phone, which happens to be the one I had. So I can confirm this process works for the Kid's Edition of this tablet as well as the original.
What You'll Need
Your tablet
A USB Cable to connect your tablet to your PC
A 4GB+ MicroSD card
A Windows PC
Some patience
Instructions
Preparing Your MicroSD Card
1. Place the LineageOS 18.1 .img file from this thread (On SourceForge, there is a section below the files about the naming conventions and how they relate to the hardware of your device and configuration of your ROM. I used the lineage-18.1-20220315-UNOFFICIAL-arm64_bvS-vndklite.img.xz image for my device. If your device is slightly different, you can use Treble Info to determine what ROM you should use. Just make sure to use the VNDKLITE rom if your device supports it.
2. Place the multidisabler .zip folder on there as well. This will preserve encryption provided by TWRP after rebooting.
3. Finally, place the MindTheGapps .zip folder on your SD card (make sure to get the correct version. In my case this was the 11.00-arm64 version).
4. Insert your MicroSD card into your device.
Unlocking the Bootloader
So the first thing you're gonna want to do is unlock your OEM bootloader on your Samsung device.
1. Go to Settings->About Phone->Software Information and look for a field called "Build Number". Tap this Five Times until you see a notification saying developer settings were enabled.
2. Go to Settings->Developer Settings and look for the setting labeled OEM Unlock and turn it on.
3. From here, you can reboot your device into Recovery Mode by holding the Vol+ and Vol- buttons when the device begins to boot again.
4. You should see a blue screen with some options. Press the Vol+ button to enter Download Mode. This is where you'll use Odin to flash the firmware you need as well as TWRP.
Flashing Firmware
So when I attempted this process I used Magendanz's Unofficial TWRP 3.6.0 as it is the only version of TWRP I found for this device. I also used Odin v3.14.1_3B Patched from this XDA thread. Magendanz's TWRP requires you to have the T290XXU3CUG4 Firmware (I used the XAR region) in order to flash TWRP to your device (you can check wether or not you already have this firmware on your phone by looking the About Phone section again). It takes a while to download though make sure you have some time.
1. Download Odin and run the program. Unzip your firmware folder and use the relevant files when selecting the BL, AP, CP, CSC fields in Odin. I didn't use the HOME_CSC just leave it blank.
2. Connect your device via USB and Flash this firmware to your device.
3. Once your device restarts, go through the setup process and then repeat the Unlocking the Bootloader instructions above in order to make sure it is unlocked again.
4. Reboot your device the same way as stated above.
Flashing TWRP
Before starting, be aware that after you flash TWRP to your device, your device will restart and attempt to open the stock system again. You're going to want to hold the Power and Vol+ buttons simultaneously. You will likely get a warning screen saying that the bootloader is unlocked and may ask you to do a factory reset, this (I believe) is fine. The key here is that once you press the Power Button to continue (as instructed on the warning screen) you'll want to immediately press and hold the Power and Vol+ keys for around 6 Seconds before letting go again (you should be seeing the Samsung Galaxy Tab A logo screen). After letting go, wait around 3-4 seconds, if nothing changes, restart the device by holding all three buttons (Power, Vol+,Vol-) and attempt the process again. It's a pain in the ass but you'll get it eventually. Just make sure not to let the device boot into the system again as that can cause problems in TWRP and you'll likely have to start the process over (from flashing the firmware).
1. Once your tablet is once again in Download Mode, open Odin again and flash the TWRP (tar.md5 file) to the AP (recovery) partition. Do not use any of the other partitions.
2. If this is successful, your phone will begin to reboot. Quickly press and hold the combination of buttons Power and Vol+ until you see the warning dialog pop up. Once you do, release all buttons and be ready to quickly press and release the Power button continue, and then immediately after press and hold the Power and Vol+ buttons again for 6 seconds. After around 6 seconds, release all buttons. Wait around 3-4 seconds and, if the screen does not change to the TWRP logo, restart the device by pressing and holding all buttons simultaneously and try this step again.
3. If you have entered into TWRP, congrats!
Installing Custom ROM + Software in TWRP
1. The first thing you'll want to do is select the Wipe->Format Data. Type 'yes' and hit enter (or swipe I forget which).
2. Next, select Install, and then select your MicroSD card as your storage device. You should see your zip files (if not switch from the install image option).
3. Install the multidisabler, do not reboot
4. Go back into Install and select Install Image (might not be the exact naming) option. Select your MicroSD card as the storage device again and install the LineageOS 18.1 rom. Do not reboot.
5. Go back into Install and select your MindTheGapps zip file and install it.
Final Steps
Once you reboot you should be able to successfully reach the setup screen for Lineage. Go through the steps of setting up your device as usual and be sure that Gapps are installed. Go ahead and re-enable developer settings and enable USB-Debugging and Root Debugging. The reason for this is that, when I first installed Gapps, Google Play Protect would keep throwing warnings at me about my device not being Google Play Certified. This means I couldn't actually use any of the google play services. If you run into the same issue, here are the steps you can take to fix it:
1. First, go into Settings->Apps and find your Google Play Services app. Clear the cache and delete the app data, then reboot your device. If you try and sign into the Google Play store and you are able to without getting any play protect warnings, then you're good you can disregard the following steps.
2. If you are still receiving these warnings, you'll want to head over to this site and follow the instructions (I'm not gonna tell you how to use ADB here). Once you submit your framework ID, reboot your device. Everything should be working fine now.
And that's it! If I am forgetting any steps please let me know, again I am writing this from memory of the process so it may be missing some minor details. I hope this helps!!!
Click to expand...
Click to collapse
bro, I have a problem, my tablet is in a bootloop and I don't know what to do, try with other custom roms but it's the same, what do I have to do so that when I install a custom room it doesn't give me that error?
Flashing the Gapps package resulted in an error: Failure to mount '/system_root' (Invalid argument)
V0latyle said:
Flashing the Gapps package resulted in an error: Failure to mount '/system_root' (Invalid argument)
Click to expand...
Click to collapse
Sorry for the bother, new to Android modding scene.
I went into the recovery menu (oem unlock on) and tried to flash TWRP as written on this guide, but I get a secure check fail : aboot on my device and fail on Odin. What do I do here?
Edit: Aparently my device is SM-T295, basically the LTE version of the same device, which is why it isn't recognising it. My bad.
Do you have any video to teach better ???
HyruleanKnight said:
Sorry for the bother, new to Android modding scene.
I went into the recovery menu (oem unlock on) and tried to flash TWRP as written on this guide, but I get a secure check fail : aboot on my device and fail on Odin. What do I do here?
Edit: Aparently my device is SM-T295, basically the LTE version of the same device, which is why it isn't recognising it. My bad.
Click to expand...
Click to collapse
Shouldn't matter, TWRP is the same for both variants.
There's two ways to get around the secure check fail problem:
After updating via Odin, make sure you immediately interrupt the boot and force reboot into Download Mode. Then, flash TWRP.
Or, after updating, allow your device to boot to Android, skip through the setup wizard (make sure you connect to the internet), and enable Developer Options. Ensure OEM Unlocking is there and grayed out. If not, leave it for a bit until it is. This disables Vaultkeeper on the bootloader. Then, reboot to download mode and flash TWRP.
In both cases, after flashing TWRP, DO NOT let the device boot into Android. Force boot into recovery, then install the Multidisabler from here.
Now to my own problem...
I don't know what I did differently (or wrong) but I cannot get LineageOS to boot correctly on my T290. I was running 18.1 before. I recently updated to CVG3 and followed the same process as I did before - flashed TWRP, then installed the LineageOS GSI to /system.
18.1 continuously bootloops without even loading LineageOS.
19.1 gets to the LineageOS splash screen, and occasionally the setup screen, but continuously reboots also.
After flashing TWRP, I'm installing the multidisabler, then wiping /system, /data, /cache.
Any idea what I'm doing wrong?
@J.Michael any thoughts? You're more familiar with Samsung than I am
V0latyle said:
Shouldn't matter, TWRP is the same for both variants.
There's two ways to get around the secure check fail problem:
After updating via Odin, make sure you immediately interrupt the boot and force reboot into Download Mode. Then, flash TWRP.
Or, after updating, allow your device to boot to Android, skip through the setup wizard (make sure you connect to the internet), and enable Developer Options. Ensure OEM Unlocking is there and grayed out. If not, leave it for a bit until it is. This disables Vaultkeeper on the bootloader. Then, reboot to download mode and flash TWRP.
In both cases, after flashing TWRP, DO NOT let the device boot into Android. Force boot into recovery, then install the Multidisabler from here.
Now to my own problem...
I don't know what I did differently (or wrong) but I cannot get LineageOS to boot correctly on my T290. I was running 18.1 before. I recently updated to CVG3 and followed the same process as I did before - flashed TWRP, then installed the LineageOS GSI to /system.
18.1 continuously bootloops without even loading LineageOS.
19.1 gets to the LineageOS splash screen, and occasionally the setup screen, but continuously reboots also.
After flashing TWRP, I'm installing the multidisabler, then wiping /system, /data, /cache.
Any idea what I'm doing wrong?
@J.Michael any thoughts? You're more familiar with Samsung than I am
Click to expand...
Click to collapse
I think I have a solution.
I see that you are installing the multidisabler after you booted TWRP and by wiping the partitions, however, what you are supposed to do is this:
After you have booted into TWRP and have swiped to allow modifications, go to Wipe> Format Data and type yes. Don't reboot, and don't wipe any other partitions.
After that, go to install and then install the multidisabler, don't reboot.
Then install the latest LineageOS gsi to the system partition, and finally install gapps, then reboot.
Make sure you are choosing the arm64_bvS_vndklite variant, otherwise it will bootloop.
Hope this helps!
Just Mike said:
I think I have a solution.
I see that you are installing the multidisabler after you booted TWRP and by wiping the partitions, however, what you are supposed to do is this:
After you have booted into TWRP and have swiped to allow modifications, go to Wipe> Format Data and type yes. Don't reboot, and don't wipe any other partitions.
After that, go to install and then install the multidisabler, don't reboot.
Then install the latest LineageOS gsi to the system partition, and finally install gapps, then reboot.
Make sure you are choosing the arm64_bvS_vndklite variant, otherwise it will bootloop.
Hope this helps!
Click to expand...
Click to collapse
Okay, so install Multidisabler AFTER wiping data. I'll try that.
I'm using the bgS image so it's already got Google apps. I didn't have any success flashing any of the Gapps packages on the vanilla images.
Is Multidisabler still necessary on Android 11 on this device, or do we just need a patched vbmeta.img?
V0latyle said:
Okay, so install Multidisabler AFTER wiping data. I'll try that.
I'm using the bgS image so it's already got Google apps. I didn't have any success flashing any of the Gapps packages on the vanilla images.
Is Multidisabler still necessary on Android 11 on this device, or do we just need a patched vbmeta.img?
Click to expand...
Click to collapse
Yes, Multidisabler is necessary, otherwise it'll bootloop. I haven't tried anything with a patched vbmeta and frankly don't want to.
The bgS version will work just fine for Android 11.
Currently running Android 13 with LineageOS 20.0, the bvS version. Gotta say it works great. MindtheGapps 13 will work, I haven't encountered any "This device is not certified" issues.
Just Mike said:
Yes, Multidisabler is necessary, otherwise it'll bootloop. I haven't tried anything with a patched vbmeta and frankly don't want to.
The bgS version will work just fine for Android 11.
Currently running Android 13 with LineageOS 20.0, the bvS version. Gotta say it works great. MindtheGapps 13 will work, I haven't encountered any "This device is not certified" issues.
Click to expand...
Click to collapse
Do I need to wipe /system or /boot or anything before installing? I did exactly as you said - rebooted to recovery (was running Samsung stock), formatted data, installed multidisabler, then installed a LineageOS 19 image to /system. It begins to boot (LineageOS animation) then reboots.
Are you using Andy Yan's builds?
V0latyle said:
Do I need to wipe /system or /boot or anything before installing? I did exactly as you said - rebooted to recovery (was running Samsung stock), formatted data, installed multidisabler, then installed a LineageOS 19 image to /system. It begins to boot (LineageOS animation) then reboots.
Are you using Andy Yan's builds?
Click to expand...
Click to collapse
Nope, you don't have to wipe any other partitions, only format data
Yes, I'm using Andy Yan's builds. I'll link the thread here: https://forum.xda-developers.com/t/gsi-13-lineageos-20-trebledroid-based.4517345/
If I may ask, which type GSI from Andy Yan did you use?
Just Mike said:
Nope, you don't have to wipe any other partitions, only format data
Yes, I'm using Andy Yan's builds. I'll link the thread here: https://forum.xda-developers.com/t/gsi-13-lineageos-20-trebledroid-based.4517345/
If I may ask, which type GSI from Andy Yan did you use?
Click to expand...
Click to collapse
Trying to get back into TWRP, just a sec...
-arm64_bgS.img
Flashing the vndklite one now to see if it works
If I can get this working, I plan on using a bgN flavor so I can just install Magisk, since I don't use SuperSU
Edit: vndklite is bootlooping too