I recently rolled back to the factory image to install the OTA 4.4 update (Sprint). I had an unlocked bootloader prior to the update and when I boot into recovery my device tells me I'm unlocked. I downloaded the TWRP image and used the following command from the boot loader:
Code:
mfastboot flash recovery twrp-2.6.3.1-ghost-4.4.img
When I run that command (I also tried "fastboot" in addition to mfastboot), it looks like everything worked OK but when I choose the "recovery" option from the bootloader my device boots into Android instead of into the recovery rom. When I try:
Code:
adb reboot recovery
My device displays the "No Command" recovery screen, as if it were booted using the stock Android recovery image instead of TWRP.
Am I missing a step somewhere to get TWRP on my device?
danherbert said:
I recently rolled back to the factory image to install the OTA 4.4 update (Sprint). I had an unlocked bootloader prior to the update and when I boot into recovery my device tells me I'm unlocked. I downloaded the TWRP image and used the following command from the boot loader:
Code:
mfastboot flash recovery twrp-2.6.3.1-ghost-4.4.img
When I run that command (I also tried "fastboot" in addition to mfastboot), it looks like everything worked OK but when I choose the "recovery" option from the bootloader my device boots into Android instead of into the recovery rom. When I try:
Code:
adb reboot recovery
My device displays the "No Command" recovery screen, as if it were booted using the stock Android recovery image instead of TWRP.
Am I missing a step somewhere to get TWRP on my device?
Click to expand...
Click to collapse
So after flashing recovery did you try to access twrp prior to rebooting to the system?
Sent on my Moto X
flashallthetime said:
So after flashing recovery did you try to access twrp prior to rebooting to the system?
Click to expand...
Click to collapse
Yes. I've tried accessing recovery directly from the fastboot menu immediately after flashing.
danherbert said:
Yes. I've tried accessing recovery directly from the fastboot menu immediately after flashing.
Click to expand...
Click to collapse
OK, you're going to hate this but you need to rsdlite your carriers kitkat sbf firmware, its happened to more than a few people including me, recovery just won't stick after taking an ota for some folks
Sent on my Moto X
flashallthetime said:
OK, you're going to hate this but you need to rsdlite your carriers kitkat sbf firmware, its happened to more than a few people including me, recovery just won't stick after taking an ota for some folks
Click to expand...
Click to collapse
Your suggestion worked. I didn't have easy access to a Windows machine so I couldn't use rsdlite. I had to manually reset to stock. For anyone who stumbles upon this thread, these are the steps I used which worked for me:
Make sure adb and fastboot from the Android SDK are already part of your PATH.
Download moto-fastboot for Mac OS X
Download the Kitkat 4.4 update for Sprint (Make sure to download the version that matches the build number from "Settings -> About Phone" in your device)
Download the Kitkat 4.4 version of TWRP
Extract the factory image .zip to a folder
Copy the moto-fastboot binary to the folder you extracted the factory image to and rename it to "mfastboot"
Copy the TWRP .img file to the folder with the factory image files
Create a file named "factoryreset.sh" and paste the following as its contents
Code:
#!/bin/sh
FASTBOOT=./mfastboot
$FASTBOOT getvar max-download-size
$FASTBOOT oem fb_mode_set
$FASTBOOT flash partition gpt.bin
$FASTBOOT flash motoboot motoboot.img
$FASTBOOT flash logo logo.bin
$FASTBOOT flash boot boot.img
$FASTBOOT flash recovery recovery.img
$FASTBOOT flash system system.img
$FASTBOOT flash modem NON-HLOS.bin
$FASTBOOT erase modemst1
$FASTBOOT erase modemst2
$FASTBOOT flash fsg fsg.mbn
$FASTBOOT erase cache
$FASTBOOT erase userdata
$FASTBOOT erase customize
$FASTBOOT erase clogo
$FASTBOOT oem config carrier sprint
$FASTBOOT oem fb_mode_clear
Open a terminal and navigate to the directory you created
On your device, navigate to "Settings -> About Phone" and tap on the build number 7 times to enable developer mode
Go back to the main "Settings" screen, open "Developer Options", and enable USB Debugging
Connect your device to your computer. Go back to your device, make sure you choose to trust your computer to use ADB in the dialog that pops up, then run the following command from your terminal
Code:
adb reboot-bootloader
Once your device is in fastboot mode, run the command
Code:
sh factoryreset.sh
From the device choose to boot normally and wait for it to finish booting completely.
Run the command
Code:
adb reboot-bootloader
Once the device is in fastboot mode again, run the command
Code:
fastboot flash recovery twrp-2.6.3.1-ghost-4.4.img
From your device, power up normally then reboot into the recovery. If everything went smoothly you'll boot into TWRP recovery.
Code:
adb reboot recovery
So I get the same problem with update to ***170 [[got 132 ]] rooted and recovery.
For me update stopped at 14%
Solution
1. Make backup all ur photos etc
2.Download firmware from this topic http://forum.xda-developers.com/p8lite/general/huawei-p8-p8-lite-stock-rom-firmware-t3176374
3.Download Huawei Extractor http://forum.xda-developers.com/attachment.php?attachmentid=3262544&d=1429042973
4.Download http://forum.xda-developers.com/showthread.php?t=2317790
5.Open Command prompt and go to the directory where adb/fastboot is installed
6. Make sure that ur phone is full charged
7.Connect phone with USB debbuging on
8.Extract 'Huawei Extractor" to a folder and run the executable
9.Extract the firwmare archive (ex. ALE-L21V100R001C432B132_Europe_Dual) to a folder
10.Run Huawei Image Extractor
11.Browse (press [...]) and select the UPDATE.APP file inside the dload folder of the extracted firmware archive
12.Right click on the package files and do an Extract All to a folder (create one)
13.Copy the files: BOOT.img RECOVERY.img SYSTEM.img CUST.img to the directory where adb/fastboot is installed
14.Go to the opened command prompt and enter fastboot mode: 'adb reboot bootloader'
15.Flash the system partition: fastboot flash system SYSTEM.img (takes quite a bit)
16.Flash the custom partition: fastboot flash cust CUST.img
17.Flash the recovery partition: fastboot flash recovery RECOVERY.img
18.Flash the vendor partition: fastboot flash boot BOOT.img
19.Repeat all flashes if you get any error
20.Reboot phone: fastboot reboot
now go to settings and update ur phone, also again u can do root etc
oczywiscie pozdrawiam cala Polske
Well I have tried to install MIUI ROM 6.5.26 after not processing updates for months (since november).
So I downloaded latest ROM and put it to the top of the partitions and then I wiped everything and that's where i might have done a mistake: I wiped internal storage (inside TWRP 2.8.7 i found there http://forum.xda-developers.com/mi-...timizing-leo-miui-advanced-tweaks-to-t3286972) then I might have might done a second mistake: I have done the command fastboot 'flash boot boot.img' as I read on an old HTC forum.
Then I pushed the latest ROM to the phone (as it was not there after the wipes) and when I tried installing it, it gave E: unable to mount 'cache' .
Now it seems i cannot enter TWRP, only Fastboot or I am stuck with MI logo.
I just want to install latest ROM, as I have done Titanium Backup before all the mess.
I don't know where i should start.
I am on mac so cannot use Mi Flash
EMJI79 said:
Well I have tried to install MIUI ROM 6.5.26 after not processing updates for months (since november).
So I downloaded latest ROM and put it to the top of the partitions and then I wiped everything and that's where i might have done a mistake: I wiped internal storage (inside TWRP 2.8.7 i found there http://forum.xda-developers.com/mi-...timizing-leo-miui-advanced-tweaks-to-t3286972) then I might have might done a second mistake: I have done the command fastboot 'flash boot boot.img' as I read on an old HTC forum.
Then I pushed the latest ROM to the phone (as it was not there after the wipes) and when I tried installing it, it gave E: unable to mount 'cache' .
Now it seems i cannot enter TWRP, only Fastboot or I am stuck with MI logo.
I just want to install latest ROM, as I have done Titanium Backup before all the mess.
I don't know where i should start.
Click to expand...
Click to collapse
you wiped internal sd so you have nothing the only way to solve is
Download the fastboot ROM https://www.dropbox.com/s/dg198q49dctzfgr/leo_images_5.11.26_20151104.0000.4_5.1_cn.tar.gz?dl=0 (recomend this others from this year locked bootloader)
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
10. Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash tz tz.mbn
C:\Fastboot>fastboot flash dbi sdi.mbn
C:\Fastboot>fastboot flash sbl1 sbl1.mbn
C:\Fastboot>fastboot flash rpm rpm.mbn
C:\Fastboot>fastboot flash aboot emmc_appsboot.mbn
C:\Fastboot>fastboot erase boot
C:\Fastboot>fastboot flash misc misc.img
C:\Fastboot>fastboot flash modem NON-HLOS.bin
C:\Fastboot>fastboot flash system system.img
C:\Fastboot>fastboot flash cache cache.img
C:\Fastboot>fastboot flash userdata userdata.img
C:\Fastboot>fastboot flash recovery recovery.img
C:\Fastboot>fastboot flash boot boot.img
C:\Fastboot>fastboot reboot
Now you're all set and should be able to boot normally.
after you can install recovery
to install recoverytwrp https://www.dropbox.com/s/hkuwc6d881im2hy/TWRP_leo.zip?dl=0
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash recovery TWRP.img
C:\Fastboot>fastboot reboot
done now you can install latest rom from xiaomi.eu Does not locked bootloader
helderfp said:
you wiped internal sd so you have nothing the only way to solve is
Download the fastboot ROM https://www.dropbox.com/s/dg198q49dctzfgr/leo_images_5.11.26_20151104.0000.4_5.1_cn.tar.gz?dl=0 (recomend this others from this year locked bootloader)
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
10. Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash tz tz.mbn
C:\Fastboot>fastboot flash dbi sdi.mbn
C:\Fastboot>fastboot flash sbl1 sbl1.mbn
C:\Fastboot>fastboot flash rpm rpm.mbn
C:\Fastboot>fastboot flash aboot emmc_appsboot.mbn
C:\Fastboot>fastboot erase boot
C:\Fastboot>fastboot flash misc misc.img
C:\Fastboot>fastboot flash modem NON-HLOS.bin
C:\Fastboot>fastboot flash system system.img
C:\Fastboot>fastboot flash cache cache.img
C:\Fastboot>fastboot flash userdata userdata.img
C:\Fastboot>fastboot flash recovery recovery.img
C:\Fastboot>fastboot flash boot boot.img
C:\Fastboot>fastboot reboot
Now you're all set and should be able to boot normally.
after you can install recovery
to install recoverytwrp https://www.dropbox.com/s/hkuwc6d881im2hy/TWRP_leo.zip?dl=0
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash recovery TWRP.img
C:\Fastboot>fastboot reboot
done now you can install latest rom from xiaomi.eu Does not locked bootloader
Click to expand...
Click to collapse
OK thanks a lot. :good:
I will try that tonight or tomorrow (already downloading from your dropbox, thanks again).
I'll let you know.
Only i dont understand: (recomend this others from this year locked boot loader) ?
EMJI79 said:
Only i dont understand: (recomend this others from this year locked boot loader) ?
Click to expand...
Click to collapse
It broke halfway, so I am trying again. Thank you for your patience.
Well, I downloaded it entirely and tried "fastboot the tz", then I get -> "device is locked. Cannot flash images"...
So I guess I locked my bootloader already, somehow... :crying:
EMJI79 said:
Well, I downloaded it entirely and tried "fastboot the tz", then I get -> "device is locked. Cannot flash images"...
So I guess I locked my bootloader already, somehow... :crying:
Click to expand...
Click to collapse
ok
so you have to do this
Download Xiaomi MiFlash Tool and install it to your PC https://www.dropbox.com/s/1qntzckybxg3rr4/MiSetup3.2.1.3111_2717.zip?dl=0
Download Qualcomm Driver 32-bit https://www.dropbox.com/s/klnn6h9z7038u80/QDLoader HS-USB Driver_32bit_Setup.zip?dl=0 OR Qualcomm Driver 64-bit https://www.dropbox.com/s/gvizx1ja1vmihox/QDLoader HS-USB Driver_64bit_Setup.zip?dl=0 install it to your PC
Enter your phone in fastboot mode
in command promt wrtite:
cmd
cd C:\fastboot
fastboot devices
fastboot oem edl
After the last command Your Note pro detected as a new device
Launch MiFlash and flash Note pro not locked ROM if you get one error at the midle (not at the beginnig) of flashing dont worry, you have unlocked bootloader, and you can folow the previous steps you already tried
The latest roms from xiaomi (since January 2016) lockes bootloader that is why i recomend that on the link.
Thanks
But I am on Mac, no MiFlash, only ADB, fastboot...
EMJI79 said:
Thanks
But I am on Mac, no MiFlash, only ADB, fastboot...
Click to expand...
Click to collapse
to work on mac
Download the fastboot ROM for your Mi phone and place it on your desktop. Double-click on it and Archive Utility will extract the file on the desktop, so you'll get a folder,
now go to terminal an type
cd C:\fastboot
fastboot devices
fastboot oem edl
In order to use the fastboot scripts, you should go to the folder. For that purpose, execute the following command (the folder name may be different in your case, the example below is for cancro):
cd ~/Desktop/cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global
Copy the Code
Quick tip: you don't need to write the whole folder name, just type cd ~/Desktop/cancro, then press the Tab key and Terminal will append the folder name automatically.
Once inside, you need to make the scripts (all the files with .sh extension) executable. Execute the following command:
chmod +x ./*.sh
Now, the scripts are ready to use. In order to start the process, issue one of the following commands:
./flash_all.sh
or
./flash_all_except_storage.sh
or
./flash_all_except_data_storage.sh
When you start any of the scripts, you'll see the fastboot messages, flowing through the Terminal window. Once the script has done its work, the phone will restart itself automatically.
When I change directory for the fastboot ROM directory, the fastboot screen on my phone disappears. I have done the steps after that but i see no message on the terminal or the phone screen. My phone screen is black.
Edit: In fact the fastboot screen on my phone disappears when I type fastboot oem edl in my terminal although i get the message OKAY in my terminal.
EMJI79 said:
When I change directory for the fastboot ROM directory, the fastboot screen on my phone disappears. I have done the steps after that but i see no message on the terminal or the phone screen. My phone screen is black.
Edit: In fact the fastboot screen on my phone disappears when I type fastboot oem edl in my terminal although i get the message OKAY in my terminal.
Click to expand...
Click to collapse
so don't change the directory put the rom in the fastboot folder and do the next step
if you are not able to flash in your mac try in another pc (windows)
Don't you think I just locked my bootloader and I need to do the apply stuff for getting my phone unlocked?
EMJI79 said:
Don't you think I just locked my bootloader and I need to do the apply stuff for getting my phone unlocked?
Click to expand...
Click to collapse
you dont need
just try
put rom in fastboot folder and
cd C:\fastboot
fastboot devices
fastboot oem edl
chmod +x ./*.sh
./flash_all.sh
to unlock bootloader the previous steps (not this) work fine on windows
http://en.miui.com/thread-237832-1-1.html
https://xiaomi.eu/community/threads/mi-note-pro-complete-beginners-guide.30817/
every time I type:
fastboot oem edl
the screen of the smartphone goes off
Maybe I will buy Windows to make it work in VM...
Only can you interpretate why fastboot oem edl makes the screen go off?
EMJI79 said:
Maybe I will buy Windows to make it work in VM...
Only can you interpretate why fastboot oem edl makes the screen go off?
Click to expand...
Click to collapse
do you have qualcom drivers instaled?
No
Will try tomorrow.
Thanks again.
The link to your dropbox for Qualcomm drivers is for Windows, i found that:https://developer.qualcomm.com/download/software
and Snapdragon SDK but I have to register.
Is Snapdragon SDK actually Qualcomm drivers?
helderfp said:
do you have qualcom drivers instaled?
Click to expand...
Click to collapse
Hello,
OK, no Qualcomm drivers for Mac it seems... I have searched thoroughly and haven't found. I have asked a en.miui dev and waiting for the response.. Don't have them?
Hello everyone.
My phone was hard bricked 3 monhts ago.
And today I unbrick it.
I use different model(E4 sprint) unbrick file but it work.
.........
......
cAN YOU SHARE THE METHOD?
help
ismail0100 said:
Hello everyone.
My phone was hard bricked 3 monhts ago.
And today I unbrick it.
I use different model(E4 sprint) unbrick file but it work.
Click to expand...
Click to collapse
please share the metod. I have a xt1775 model phone from lenovo, international version, and I cant unbricked
johita2006 said:
please share the metod. I have a xt1775 model phone from lenovo, international version, and I cant unbricked
Click to expand...
Click to collapse
I use this topic. (https://forum.xda-developers.com/moto-e4/how-to/e4-sprint-xt1766-unbrick-easy-sdcard-t3833408)
Fisrt Message have a unbrick.img file link on mega. I download this unbrick.img file. I know different phone model but it work.
After use this topic(https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012)
0) Put the Moto g5 on mains charge until you have finished flashing the sdcard so it's fully charged ready for the boot test!
1) Run Linux, preferably cinnamon or mate versions of Linux Mint
2) Insert the sdcard in pc or card reader and open "Disks" app
3) In "Disks" app select sdcard and you will see the sdcard partitions
4) Press "-" to delete the partition (delete all partitions if there is more than one)
5) (dont do it this part)Press "+" to create a new one and name it mmcblk0, set FAT(FAT32) file format and press "CREATE"
6) Press "Play" button to mount the sdcard, look to see what path the sdcard has (/dev/sd??) and then close the "Disks" app
7) (For us unbrick.img not mmcblk0.img)Go to Desktop, open "Computer" and navigate to the location where the img file is extracted (mmcblk0.img)
8) Open the window where img file is with root (right click on window and select "open as root")
9) In root window open the Terminal (right click on window and select "open terminal")
no need to type "su" in terminal, it has root already (see notes if using Linux live usb/dvd)
10) Type in terminal the command written below and don't forget to eliminate that "1" from the sdcard path,
that "1" can make the difference between the phone booting or not!!!!!
Terminal comands
- if your sdcard is seen like " /dev/sdb1"
in terminal apply this command:
Code:
sudo dd bs=4M if=unbrick.img of=/dev/sdb status=progress oflag=sync
-if your sdcard is seen like " /dev/mmcblk0p1"
in terminal apply this command:
Code:
sudo dd bs=4M if=mmcblk0.img of=/dev/mmcblk0 status=progress oflag=sync
after write file on sdcard use this command and use last firmware.
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
ismail0100 said:
I use this topic. (https://forum.xda-developers.com/moto-e4/how-to/e4-sprint-xt1766-unbrick-easy-sdcard-t3833408)
Fisrt Message have a unbrick.img file link on mega. I download this unbrick.img file. I know different phone model but it work.
After use this topic(https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012)
0) Put the Moto g5 on mains charge until you have finished flashing the sdcard so it's fully charged ready for the boot test!
1) Run Linux, preferably cinnamon or mate versions of Linux Mint
2) Insert the sdcard in pc or card reader and open "Disks" app
3) In "Disks" app select sdcard and you will see the sdcard partitions
4) Press "-" to delete the partition (delete all partitions if there is more than one)
5) (dont do it this part)Press "+" to create a new one and name it mmcblk0, set FAT(FAT32) file format and press "CREATE"
6) Press "Play" button to mount the sdcard, look to see what path the sdcard has (/dev/sd??) and then close the "Disks" app
7) (For us unbrick.img not mmcblk0.img)Go to Desktop, open "Computer" and navigate to the location where the img file is extracted (mmcblk0.img)
8) Open the window where img file is with root (right click on window and select "open as root")
9) In root window open the Terminal (right click on window and select "open terminal")
no need to type "su" in terminal, it has root already (see notes if using Linux live usb/dvd)
10) Type in terminal the command written below and don't forget to eliminate that "1" from the sdcard path,
that "1" can make the difference between the phone booting or not!!!!!
Terminal comands
- if your sdcard is seen like " /dev/sdb1"
in terminal apply this command:
Code:
sudo dd bs=4M if=unbrick.img of=/dev/sdb status=progress oflag=sync
-if your sdcard is seen like " /dev/mmcblk0p1"
in terminal apply this command:
Code:
sudo dd bs=4M if=mmcblk0.img of=/dev/mmcblk0 status=progress oflag=sync
after write file on sdcard use this command and use last firmware.
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
What did you name the sd card?
paigao said:
What did you name the sd card?
Click to expand...
Click to collapse
I did not remember sorry. Probably not change
Hi guys, I'm doing this tutorial because I didn't find a complete tutorial on how to restore our Moto X 2014 to stock 6.0 marshmallow.
As I asked here for help, I tried encrypting the phone when using LineageOS but it failed and then bootlooped, so I needed to reflash the stock ROM because the formating though TWRP failed too.
I used a Linux distro to do the job. For windows I think there are scripts out there which do the job, and of course you can adapt the commands given here to work with Windows (i.e. changing "sudo fastboot" to "fastboot.exe").
Note: My device is a XT1097 variant and the boot loader was already unlocked. There's also a Zip file for those who have a working TWRP recovery already.
Download the ROM files here: EU variant // RET LA + NIIMX variants
The file I used for this tutorial was: Motorola_Moto_X_XT1097_VICTARA_RETLA_6.0_MPES24.49-18-3_cid12_6.0.zip
Setup of the computer:
1- Install androidtools-fastboot & androidtools-adb
[Optional] 2- Install libmtp package too
Setup of the phone:
1- Reboot your phone into fastboot mode (press power and vol down toghether)
2- Connect the phone to PC
3- Extract the content of the Zip file & enter the folder
4- Open a new terminal inside the folder called "Firmware"
5- Execute these commands below (one command per line)
Bash:
sudo fastboot flash partition gpt.bin
sudo fastboot flash motoboot motoboot.img
sudo fastboot flash boot boot.img
sudo fastboot flash recovery recovery.img
sudo fastboot flash system system.img_sparsechunk.0
sudo fastboot flash system system.img_sparsechunk.1
sudo fastboot flash system system.img_sparsechunk.2
sudo fastboot flash system system.img_sparsechunk.3
sudo fastboot flash system system.img_sparsechunk.4
sudo fastboot flash system system.img_sparsechunk.5
sudo fastboot flash system system.img_sparsechunk.6
sudo fastboot flash system system.img_sparsechunk.7
sudo fastboot flash system system.img_sparsechunk.8
sudo fastboot flash system system.img_sparsechunk.9
sudo fastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo fastboot flash fsg fsg.mbn
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot erase customize
sudo fastboot erase clogo
[Optional] Tip: If you want to reset the Motorola logo too (it will display again the warning regarding the bootloader unlock, this is why I skipped it), execute the command below just before entering boot.img command
Bash:
sudo fastboot flash logo logo.bin
6- Reboot the phone just in case
Bash:
sudo fastboot reboot-bootloader
7- Reboot the phone into the system
Bash:
sudo fastboot reboot
8- Wait several minutes on the animation booting screen
9- Done, the phone should now show the "Welcome" greenish screen
10- After the initial setup, go to the PlayStore and update your Google Play Services app before updating/installing other apps
I based my tutorial on this post here by @seco2004 and in this post forum here by Junior Gomes. Thanks for all the devs for the hard work with this amazing (besides the battery duration) phone and for that website for hosting all Motorola's stock ROMs at GDrive.