Database Develop

Flashing Issues/Permission Issues

A few days ago I got my Atrix HD and immediately rooted and subsequently unlocked the bootloader. Later I successfully flashed EcHoFiiVe's paranoidAndroid port... I didn't really like it because of the aspect ratio (too tiny) so I tried to flash back to a stock ROM. I lost and later accidentally deleted the backup I had made of the stock ROM that came on the device so that is now out of the question but for some reason, no matter what I do, I can't make changes to /system from the recovery or from the bootloader using fastboot commands. I've tried inputing
Code:
fastboot erase system -w
and it told me that I didn't have sufficient permissions and that the command failed. Therein lies my problem. Fortunately, I have a runnable backup (PA) I just really wish to try something different and the device is adamantly against the idea. According to the bootloader the device is unlocked with status code 3. Any help will be greatly appreciated!

read this
http://forum.xda-developers.com/showthread.php?t=2226527

frog1982 said:
read this
http://forum.xda-developers.com/showthread.php?t=2226527
Click to expand...
Click to collapse
I've read through that and I can now see a line that I missed that said that it was a common issue for that particular command to not work but I still don't know what to do about my inability to flash a different ROM. I have tried to mount /system before flashing and I've tried wiping /system using the recovery before flashing, all without avail. Do you have any advice on how to wipe the system partition?

you do not have to wipe it just fastboot flash Mex retail to overwrite it and you will be starting over.

frog1982 said:
you do not have to wipe it just fastboot flash Mex retail to overwrite it and you will be starting over.
Click to expand...
Click to collapse
to be clear, are you saying I can just do this:
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
Code:
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot

sparkplugDev said:
to be clear, are you saying I can just do this:
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
Code:
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
yes but make sure you also have the snap-fastboot files in the folder you are working in or in your path

[No More Errors] [Fastboot Rom Flashing] [Direct Method]

Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure.
Note:
1. This will erase all your data and internal storage so better you backup them first.
2. I'm not responsible if anything goes wrong with your device.
Requirement:
1. Minimal ADB and Fastboot
2. Fastboot rom
3. Mi Pc Suite (for drivers, you can skip if already installed drivers)
Preparing:
1. Install Mi Pc Suite.
2. Install Minimal ADB and Fastboot.
3. Extract fastboot rom anywhere.
4. Copy all the files from images folder to the directory where Minimal ADB And fastboot is installed.
for example C:\Program Files (x86)\Minimal ADB and Fastboot
Procedure:
1. Connect your phone to pc in fastboot mode,
your Pc will install some drivers automatically.
2. Go to Minimal ADB and Fastboot directory .
3. Hold shift and right click.
4. Click open command window here.
5. Enter fastboot devices command.
If you see your device name in list of devices attached in command window then your good to go.
6. Now enter the following commands given below one by one in sequence.
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash hyp hyp.mbn
fastboot flash tzbak tz.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash hypbak hyp.mbn
fastboot erase boot
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash sec sec.dat
fastboot flash splash splash.img
fastboot reboot
Or
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks

It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.

did you place all the files in minimal adb and fastboot folder?
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
did you place all the files in minimal adb and fastboot folder? And what you mean by using several different rom package? This method is only for fastboot rom made for redmi 2 only. Make sure your phone is detected by PC in fastboot mode with command fastboot devices.
I have tested this method three times without any errors. You are surely doing something wrong.

screenshot
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.

rkmadotra said:
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.
Click to expand...
Click to collapse
i have a similar problem :
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>fastboot.exe flash partition gpt_backup0.bin
target reported max download size of 268435456 bytes
sending 'partition' (16 KB)...
OKAY [ 0.005s]
writing 'partition'...
FAILED (remote: failed to write partition)
finished. total time: 0.018s
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>
Click to expand...
Click to collapse
I have a 2014813 , was using a moded 2014811 rom on it. Kept crashing wanted to reflash , and installed TWRP on it , that said can't mount partitions and now i can't flash neider the 811 or the 813 roms to it . Just keeps saying error writing to partition . I can attach a screenshot of the Miflash tool if it helps. And above is the Command prompt error.

Pushing just 5 img files didn't worked for me and was stuck on MI logo, but pushing all files was reviving my phone!
Thank you very much for this method!

sir, my Redmi 2 is bricked
when I am trying to flash this the error messages is coming like
cannot load " gpt_both0.bin".
like these and so on. when I am using flash all.bat same messages is coming and then after erasing boot the phone reboots with black screen .
sir please help me
your help will be highly appriciated.
[email protected]

My phone stucks on Mi logo what will do

yeah!!!!!!!!!!!! after trying many other methods like recovery through adb ,command prompt,mi flash tool,mi pc suit...... i downloaded atleast 4-5 roms to just confirm that whether flash tool has some problem or the ROMs..........but if something worked after constantly trying many things in past three days it is this method.......seriously...
FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI

Yes! It worked for me as well.
Thanks for your steps.
(FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI )
and it worked good.
My Mi Account was locked and could not connect to internet at all.
I had tried using Flash tools, PC suite - Flash methods and nothing worked. I had spend more time to fix my mobile in all these ways.
But this method is awesome. Only took around 15 minutes to completely flash my mobile.
After flashing the mobile, I am able to connect to internet and I have also created a new Mi-Account and linked my G-Mail account to it.
Am super happy now.
Thanks a lot.
However I would wish to add another details to the above setps:
The Flashall.BAT too needs to be extracted and copied into the same folder where the contents from ROM's Image folder were copied.

awesome bro thankyou very much.it's working absolutely well:good::good:

Tried a similar method and got my redmi2 prime hard bricked. Can someone tell me the test points in the device 2014818?

Thanx This works for me. successfull to flash my redme 2
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks[/QUOTE]

Will this work for Redmi note 3 Snapdragon??

Hello
I am stick in bootloop with my Redmi 3 (after trying Flashify).
Tried the above method with high hopes, as I have been trying everything else also with no luck.
I have downloaded a ROM for my device of course.
It all seems to go well until I launch the Flash_All.bat
Then the DOS commands are executed in 5 to 10 secs, and my devices reboot, but in a bootloop again
I got a breif view at the DOS commands, and it basically, at several lines says somthing, like: "failed to write, device is locked"
see attached sreen shot
does this mean my problem has no solution and I can simply throw away my device?
Thanks

rkmadotra said:
Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure...
Click to expand...
Click to collapse
You solved my problem :good:

Thank you buddy..... This method works

Fastbooting method did not bring back my stock model number that is hm2014818. It changed to 2014817 when i flashed miui 8 64bit rom for redmi 2. Now i am not able to go back to my original model number even by fastboot method. Any help please??

will the flash all.bat support on other mi device's??

stuck at erasing user data
flashing stuck at flashing userdata

[GUIDE] Unlock bootloader on 8.1

As you know, on 8.1 we still have ununlockable bootloader. But it's quite simple to fix, just flash 'old' bootloader
It's unofficial method
1) Go to fastboot bode (keep + button on reboot/boot your phone)
2) Use service firmware or download this https://vk.com/doc275347426_479517439 , open command promp (start.bat)
3) VERY IMPORTANT
you should know your platfotm. As I know, 2 GB (my phone) have 8917 processor, 3gb/32 have 8937. You can get your platform with this
Code:
fastboot getvar platform
4) I have 8917, so I type
Code:
fastboot flash aboot 8917_emmc_appsboot.mbn
fastboot flash abootbak 8917_emmc_appsboot.mbn
On 8937 type
Code:
fastboot flash aboot 8937_emmc_appsboot.mbn
fastboot flash abootbak 8937_emmc_appsboot.mbn
5) Reboot your phone, you should get 'device state unlocked' , if not, do like U did this on old bootloader from fastboot
6)Flash twrp as usual. In archive I already include this, you can flash it with
Code:
fastboot flash recovery twrp.img
And install magisk/SSu
Attention: if you wanna get full access for /data partition from twrp, you should flash patch with prevent autoencrypt. I did not do this, system access is enought for me.
But before you root your device, U have to erase data partition, coz root patch boot partition too, patched boot can not load stocky encrypted data. After data format you can flash magisk. When you boot phone, it will encrypt data partition and you get installed Magisk and ecrypted data
Original system/boot images, restore them with twrp https://mega.nz/#!ziJxCCqA!C0lG5hUcOGwl2ER0Mp342lfx5_DOIzalAi7RExR6nro

My phone is 8937 and device state remains locked after stage 5. And "if not, do like U did this on old bootloader from fastboot" means we should use some other adb codes? Such as?
Woohooo, the display has been turned upside down. How do I fix this?
---------- Post added at 03:24 PM ---------- Previous post was at 03:17 PM ----------
What the ??? Stock recovery is upside down, but fastboot is the right way. Is this supposed to happen?
---------- Post added at 03:45 PM ---------- Previous post was at 03:24 PM ----------
Hmmm, I think I'll pass on this method. I appreciate the effort, but too much weirdness happening with my phone.

igerup said:
My phone is 8937 and device state remains locked after stage 5. And "if not, do like U did this on old bootloader from fastboot" means we should use some other adb codes? Such as?
Woohooo, the display has been turned upside down. How do I fix this?
---------- Post added at 03:24 PM ---------- Previous post was at 03:17 PM ----------
What the ??? Stock recovery is upside down, but fastboot is the right way. Is this supposed to happen?
Click to expand...
Click to collapse
worked thanks

Display rotates only few seconds when it boot

Dreamject said:
Display rotates only few seconds when it boot
Click to expand...
Click to collapse
It doesn't bother me at all ? it worked perfectly, thanks for your work

Dreamject said:
As you know, on 8.1 we still have ununlockable bootloader. But it's quite simple to fix, just flash 'old' bootloader
It's unofficial method
1) Go to fastboot bode (keep + button on reboot/boot your phone)
2) Use service firmware or download this https://vk.com/doc275347426_479517439 , open command promp (start.bat)
3) VERY IMPORTANT
you should know your platfotm. As I know, 2 GB (my phone) have 8917 processor, 3gb/32 have 8937. You can get your platform with this
Code:
fastboot getvar platform
4) I have 8917, so I type
Code:
fastboot flash aboot 8917_emmc_appsboot.mbn
fastboot flash abootbak 8917_emmc_appsboot.mbn
On 8937 type
Code:
fastboot flash aboot 8937_emmc_appsboot.mbn
fastboot flash abootbak 8937_emmc_appsboot.mbn
5) Reboot your phone, you should get 'device state unlocked' , if not, do like U did this on old bootloader from fastboot
6)Flash twrp as usual. In archive I already include this, you can flash it with
Code:
fastboot flash recovery twrp.img
And install magisk/SSu
Attention: if you wanna get full access for /data partition from twrp, you should flash patch with prevent autoencrypt. I did not do this, system access is enought for me.
But before you root your device, U have to erase data partition, coz root patch boot partition too, patched boot can not load stocky encrypted data. After data format you can flash magisk. When you boot phone, it will encrypt data partition and you get installed Magisk and ecrypted data
Original system/boot images, restore them with twrp https://mega.nz/#!ziJxCCqA!C0lG5hUcOGwl2ER0Mp342lfx5_DOIzalAi7RExR6nro
Click to expand...
Click to collapse
dont work for me, than i do this:
1. do what you told
2. use unlock bootloader from asus website
3. repeat what you told
4. walaaa... my device unlocked, than i flash twrp and magisk
5. done, i have rooted device
:laugh::laugh::laugh:
thank you guys...

no no no ..... not work for me, and upside down the title!!!!!
I have no choice but to fix it with: xxx youtube................. /watch?v=s592QY56VjM
than restore back to oreo 8.1..........

tfstk said:
no no no ..... not work for me, and upside down the title!!!!!
I have no choice but to fix it with: xxx youtube................. /watch?v=s592QY56VjM
than restore back to oreo 8.1..........
Click to expand...
Click to collapse
if you screen rotated on thethe boot, it means you have old bl. You just needneed toto flashflash twrp, or unlock bl with fastboot

Dreamject said:
As you know, on 8.1 we still have ununlockable bootloader. But it's quite simple to fix, just flash 'old' bootloader
It's unofficial method
1) Go to fastboot bode (keep + button on reboot/boot your phone)
2) Use service firmware or download this https://vk.com/doc275347426_479517439 , open command promp (start.bat)
3) VERY IMPORTANT
you should know your platfotm. As I know, 2 GB (my phone) have 8917 processor, 3gb/32 have 8937. You can get your platform with this
Code:
fastboot getvar platform
4) I have 8917, so I type
Code:
fastboot flash aboot 8917_emmc_appsboot.mbn
fastboot flash abootbak 8917_emmc_appsboot.mbn
On 8937 type
Code:
fastboot flash aboot 8937_emmc_appsboot.mbn
fastboot flash abootbak 8937_emmc_appsboot.mbn
5) Reboot your phone, you should get 'device state unlocked' , if not, do like U did this on old bootloader from fastboot
6)Flash twrp as usual. In archive I already include this, you can flash it with
Code:
fastboot flash recovery twrp.img
And install magisk/SSu
Attention: if you wanna get full access for /data partition from twrp, you should flash patch with prevent autoencrypt. I did not do this, system access is enought for me.
But before you root your device, U have to erase data partition, coz root patch boot partition too, patched boot can not load stocky encrypted data. After data format you can flash magisk. When you boot phone, it will encrypt data partition and you get installed Magisk and ecrypted data
Original system/boot images, restore them with twrp https://mega.nz/#!ziJxCCqA!C0lG5hUcOGwl2ER0Mp342lfx5_DOIzalAi7RExR6nro
Click to expand...
Click to collapse
I've problem that if I mounted System partition in Any App,it will freeze my Systemui and can't do anything
Since 7.1.1 to 8.1 still have these problem

tony8077616 said:
I've problem that if I mounted System partition in Any App,it will freeze my Systemui and can't do anything
Since 7.1.1 to 8.1 still have these problem
Click to expand...
Click to collapse
DonT know.... Try magiskmagisk, system less stuff, change launcher, disable bloatware

Dreamject said:
As you know, on 8.1 we still have ununlockable bootloader. But it's quite simple to fix, just flash 'old' bootloader
It's unofficial method
1) Go to fastboot bode (keep + button on reboot/boot your phone)
2) Use service firmware or download this https://vk.com/doc275347426_479517439 , open command promp (start.bat)
3) VERY IMPORTANT
you should know your platfotm. As I know, 2 GB (my phone) have 8917 processor, 3gb/32 have 8937. You can get your platform with this
Code:
fastboot getvar platform
4) I have 8917, so I type
Code:
fastboot flash aboot 8917_emmc_appsboot.mbn
fastboot flash abootbak 8917_emmc_appsboot.mbn
On 8937 type
Code:
fastboot flash aboot 8937_emmc_appsboot.mbn
fastboot flash abootbak 8937_emmc_appsboot.mbn
5) Reboot your phone, you should get 'device state unlocked' , if not, do like U did this on old bootloader from fastboot
6)Flash twrp as usual. In archive I already include this, you can flash it with
Code:
fastboot flash recovery twrp.img
And install magisk/SSu
Attention: if you wanna get full access for /data partition from twrp, you should flash patch with prevent autoencrypt. I did not do this, system access is enought for me.
But before you root your device, U have to erase data partition, coz root patch boot partition too, patched boot can not load stocky encrypted data. After data format you can flash magisk. When you boot phone, it will encrypt data partition and you get installed Magisk and ecrypted data
Original system/boot images, restore them with twrp https://mega.nz/#!ziJxCCqA!C0lG5hUcOGwl2ER0Mp342lfx5_DOIzalAi7RExR6nro
Click to expand...
Click to collapse
Hi, thank to you I have unlocked my phone in 8.1.
But when I tried to downgrade to nougat, home and fingerprint botton won't work. I had tried relocking bootloader and lock again using nougat method, but still home button won't work.
Do you have any idea to fix home button so I can use nougat firmware in this device?

komtek said:
Hi, thank to you I have unlocked my phone in 8.1.
But when I tried to downgrade to nougat, home and fingerprint botton won't work. I had tried relocking bootloader and lock again using nougat method, but still home button won't work.
Do you have any idea to fix home button so I can use nougat firmware in this device?
Click to expand...
Click to collapse
You should flash service nougat

Dreamject said:
You should flash service nougat
Click to expand...
Click to collapse
I'm sorry, can you tell me what service nougat is? Did you mean play service, or other service?

komtek said:
I'm sorry, can you tell me what service nougat is? Did you mean play service, or other service?
Click to expand...
Click to collapse
you can find service fw at least on 4pda. Service fw contained more data than usual fw

Dreamject said:
you can find service fw at least on 4pda. Service fw contained more data than usual fw
Click to expand...
Click to collapse
Thanks to @Dreamject I have managed broken fingerprint sensor when I tried to downgrade to 7.1
Here is quick guide to fix broken fp sensor in 7.1:
(Prerequisites: adb driver installed on computer)
1. Download service firmware nougat v.232-AFT https://yadi.sk/d/IzR3ITht2IlHxw (source 4pda)
2. Extract firmware to root C://
3. Open flashall_AFT.bat
4. Go to fastboot mode and connect the phone to computer. (NOTE: YOU MUST ON 8.1 FIRMWARE UNLESS FP SENSOR WON'T FIXED)
5. Wait ~10 minutes until finished.

Mother Russia)

By the way, be careful, coz it contains as o remember service Oreo too.
If file name 14.2016 it's nougat, if 15.2016 it's Oreo

link is gone, pls fix the link

Bootloader ReLocked Problem same as WW-15.2016.1812.505,So contiue used these step

Dreamject said:
As you know, on 8.1 we still have ununlockable bootloader. But it's quite simple to fix, just flash 'old' bootloader
It's unofficial method
1) Go to fastboot bode (keep + button on reboot/boot your phone)
2) Use service firmware or download this https://vk.com/doc275347426_479517439 , open command promp (start.bat)
3) VERY IMPORTANT
you should know your platfotm. As I know, 2 GB (my phone) have 8917 processor, 3gb/32 have 8937. You can get your platform with this
Code:
fastboot getvar platform
4) I have 8917, so I type
Code:
fastboot flash aboot 8917_emmc_appsboot.mbn
fastboot flash abootbak 8917_emmc_appsboot.mbn
On 8937 type
Code:
fastboot flash aboot 8937_emmc_appsboot.mbn
fastboot flash abootbak 8937_emmc_appsboot.mbn
5) Reboot your phone, you should get 'device state unlocked' , if not, do like U did this on old bootloader from fastboot
6)Flash twrp as usual. In archive I already include this, you can flash it with
Code:
fastboot flash recovery twrp.img
And install magisk/SSu
Attention: if you wanna get full access for /data partition from twrp, you should flash patch with prevent autoencrypt. I did not do this, system access is enought for me.
But before you root your device, U have to erase data partition, coz root patch boot partition too, patched boot can not load stocky encrypted data. After data format you can flash magisk. When you boot phone, it will encrypt data partition and you get installed Magisk and ecrypted data
Original system/boot images, restore them with twrp https://mega.nz/#!ziJxCCqA!C0lG5hUcOGwl2ER0Mp342lfx5_DOIzalAi7RExR6nro
Click to expand...
Click to collapse
I've make a flashable which can used with ZF4 Max update ROM(script and binary based on WW-15.2016.1812.505,file is from OP post)
-Just flash it after stock ROM update

[ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T

Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock or twrp) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 6T in fastboot mode (Power and volume-);
Connect the OnePlus 6T to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
FLASHER ADVANCED GUIDE
flash-all-partitions-fastboot.bat : this .bat will flash all possible partitions through fastboot (Except persist) , there are some criticals partitions that can't be flashed through fastboot;
flash-only-persist.bat : this .bat will flash only persist partition in fastboot mode (This is good for people that have problems with sensor);
flash-all-partitions-recovery-criticals.bat : this .bat will boot the twrp and will flash criticals partitions, use this carefully;
flash-system-boot-vendor.bat : this .bat is the same of older flash-all.bat and so it will flash only vendor, system and boot;
flash-all-partitions.bat : this .bat will run flash-all-partitions-fastboot.bat , then flash-only-persist.bat and then flash-all-partitions-recovery-criticals.bat .
Now usually the one needed is only the first "flash-all-partitions-fastboot.bat" but if you are badly bricked i recommend to use flash-all-partitions.bat .
DOWNLOAD
All roms on AFH: https://www.androidfilehost.com/?w=files&flid=284914
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 6T
BRANDED PHONE
GUIDE: https://forum.xda-developers.com/on...-t-mobile-oneplus-6t-to-t3865966/post78131430
T-Mobile OnePlus 6T Internationa ROM: https://www.androidfilehost.com/?fid=11410963190603845445
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (you need to extract images.zip before proceed)
Fastboot Partitions:
Code:
fastboot flash aop_a aop.img
fastboot flash aop_b aop.img
fastboot flash bluetooth_a bluetooth.img
fastboot flash bluetooth_b bluetooth.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dsp_a dsp.img
fastboot flash dsp_b dsp.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash fw_4j1ed_a fw_4j1ed.img
fastboot flash fw_4j1ed_b fw_4j1ed.img
fastboot flash fw_4u1ea_a fw_4u1ea.img
fastboot flash fw_4u1ea_b fw_4u1ea.img
fastboot flash modem_a modem.img
fastboot flash modem_b modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw_a qupfw.img
fastboot flash qupfw_b qupfw.img
fastboot flash storsec_a storsec.img
fastboot flash storsec_b storsec.img
fastboot flash system_a system.img
fastboot flash system_b system.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash vendor_a vendor.img
fastboot flash vendor_b vendor.img
fastboot flash LOGO_a LOGO.img
fastboot flash LOGO_b LOGO.img
If you need also persist partition, this is the command:
Code:
fastboot flash persist persist.img
Criticals Partitions, for these you need to boot the TWRP:
Code:
fastboot boot TWRP.img
When you are in TWRP you need to run these commands to push and flash all criticals partitions:
Code:
adb push abl.img /sdcard/abl.img
adb shell dd if=/sdcard/abl.img of=/dev/block/bootdevice/by-name/abl_a
adb shell dd if=/sdcard/abl.img of=/dev/block/bootdevice/by-name/abl_b
adb push cmnlib.img /sdcard/cmnlib.img
adb shell dd if=/sdcard/cmnlib.img of=/dev/block/bootdevice/by-name/cmnlib_a
adb shell dd if=/sdcard/cmnlib.img of=/dev/block/bootdevice/by-name/cmnlib_b
adb push cmnlib64.img /sdcard/cmnlib64.img
adb shell dd if=/sdcard/cmnlib64.img of=/dev/block/bootdevice/by-name/cmnlib64_a
adb shell dd if=/sdcard/cmnlib64.img of=/dev/block/bootdevice/by-name/cmnlib64_b
adb push devcfg.img /sdcard/devcfg.img
adb shell dd if=/sdcard/devcfg.img of=/dev/block/bootdevice/by-name/devcfg_a
adb shell dd if=/sdcard/devcfg.img of=/dev/block/bootdevice/by-name/devcfg_b
adb push hyp.img /sdcard/hyp.img
adb shell dd if=/sdcard/hyp.img of=/dev/block/bootdevice/by-name/hyp_a
adb shell dd if=/sdcard/hyp.img of=/dev/block/bootdevice/by-name/hyp_b
adb push keymaster.img /sdcard/keymaster.img
adb shell dd if=/sdcard/keymaster.img of=/dev/block/bootdevice/by-name/keymaster_a
adb shell dd if=/sdcard/keymaster.img of=/dev/block/bootdevice/by-name/keymaster_b
adb push xbl.img /sdcard/xbl.img
adb shell dd if=/sdcard/xbl.img of=/dev/block/bootdevice/by-name/xbl_a
adb shell dd if=/sdcard/xbl.img of=/dev/block/bootdevice/by-name/xbl_b
adb push xbl_config.img /sdcard/xbl_config.img
adb shell dd if=/sdcard/xbl_config.img of=/dev/block/bootdevice/by-name/xbl_config_a
adb shell dd if=/sdcard/xbl_config.img of=/dev/block/bootdevice/by-name/xbl_config_b
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
Thanks to @SaiBork for first time tested
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
Thanks to @Dark Nightmare for T-Mobile Rom Version
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
If you are unable to use pools or moneybox, you can also make a normal donation, all private donations will be added in the moneybox:
​

Thanks Mister :good:

Great work, thx

This is great work. Thanks!

If anyone has the T-Mobile firmware or OTA captured, please post it.

Would it be wise to extract the zip to the 6T prior to rooting just in case something goes wrong?

shizat63 said:
Would it be wise to extract the zip to the 6T prior to rooting just in case something goes wrong?
Click to expand...
Click to collapse
This fastboot rom are completely stock rom, not modified

mauronofrio said:
This fastboot rom are completely stock rom, not modified
Click to expand...
Click to collapse
Right.
So before rooting the device, would it be good to copy the images from this zip to a dir on the 6T in case something goes wrong with the rooting process? For example if Magisk or TWRP mess something up, and the 6T is in a bootloop.
Or are the images in the zip only for flashing from your PC to the 6T? So it would be of no use to have the images sitting on the 6T as a backup.

Hello. after flashing with flash-all.bat, my 6T just boots to the bootloader unlocked warning and stays there. I don't know what to do next.
EDIT: Nevermind, after trying again it worked.

shizat63 said:
Right.
So before rooting the device, would it be good to copy the images from this zip to a dir on the 6T in case something goes wrong with the rooting process? For example if Magisk or TWRP mess something up, and the 6T is in a bootloop.
Or are the images in the zip only for flashing from your PC to the 6T? So it would be of no use to have the images sitting on the 6T as a backup.
Click to expand...
Click to collapse
Actually there is not a twrp that support decryption so if you also have the images on the phone you can't flash it in twrp mode. At this moment these roms can be only flashed through fastboot with a pc
Seoyoon said:
Hello. after flashing with flash-all.bat, my 6T just boots to the bootloader unlocked warning and stays there. I don't know what to do next.
EDIT: Nevermind, after trying again it worked.
Click to expand...
Click to collapse
Perfect:good:

thank you thank you thank you OP! Nearly bricked my phone while trying to install root (something got messed up with TWRP) and I couldn't even get out of bootloader into recovery. I just got my phone a few hours ago, that would have been sad

nhshah7 said:
thank you thank you thank you OP! Nearly bricked my phone while trying to install root (something got messed up with TWRP) and I couldn't even get out of bootloader into recovery. I just got my phone a few hours ago, that would have been sad
Click to expand...
Click to collapse
Perfect:good:
If you want to support this and others my projects please consider making a donation, thanks.

After using flash-all.bat I'm getting the "Your device is corrupt" red error message on boot. I can skip by pressing power twice and phone boots normally.
I see people with 6 had to use MSM download tool to get rid of the error.
Is there any solution for 6T?

nhshah7 said:
thank you thank you thank you OP! Nearly bricked my phone while trying to install root (something got messed up with TWRP) and I couldn't even get out of bootloader into recovery. I just got my phone a few hours ago, that would have been sad
Click to expand...
Click to collapse
Just for the sake of your sanity in the future, if you can get to bootloader and device files are available, you can always get it up and running. I learned that very quickly way back in the day

iaTa said:
After using flash-all.bat I'm getting the "Your device is corrupt" red error message on boot. I can skip by pressing power twice and phone boots normally.
I see people with 6 had to use MSM download tool to get rid of the error.
Is there any solution for 6T?
Click to expand...
Click to collapse
Only msm tool i think

Well same situation here got boot loop trying to root then after install using flashall.bat now I can't get a VOLTE and now I complete lost signal but when I swap my sim card to sim slot 2 everything work...kinda weir but does anyone know how to fix it?

_BГ@ckθut said:
Well same situation here got boot loop trying to root then after install using flashall.bat now I can't get a VOLTE and now I complete lost signal but when I swap my sim card to sim slot 2 everything work...kinda weir but does anyone know how to fix it?
Click to expand...
Click to collapse
Did you have a branded version?

mauronofrio said:
Did you have a branded version?
Click to expand...
Click to collapse
Oh I has unlock one from on plus website and use it on Verizon...is that what u mean...sorry I'm new to OP device
Edit: I try to do fastboot flash modem A and B also factory reset but seem not work...

_BГ@ckθut said:
Oh I has unlock one from on plus website and use it on Verizon...is that what u mean...sorry I'm new to OP device
Click to expand...
Click to collapse
Branded version are different, they have a particoular partitions for volte, i think the only.method to solve your problem is to find another person with the same branded device and make a partitions backup that you can restore

mauronofrio said:
Branded version are different, they have a particoular partitions for volte, i think the only.method to solve your problem is to find another person with the same branded device and make a partitions backup that you can restore
Click to expand...
Click to collapse
So how do I make that? Do I need provide any information or anything?

How to install ZUI - No bootloop, no brick, no bugs.

First you have to download and install 'Minimal ADB and Fasboot' (https://forum.xda-developers.com/showthread.php?t=2317790)
Now you have to download the latest firmware available here https://mirrors.lolinet.com/firmware/moto/montana_retcn/official/RETCN/
Extract it to the folder you installed Minimal ADB
Press Shift + Right click in the folder, select "open command window"
Put your phone in fastboot mode
Select and copy all the codes below then right click in the CMD window opened.
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
All working, tested by myself.
Wont brick because commands related to bootloader were removed.
For Brazilians:
Primeiramente você vai precisar instalar o 'Minimal ADB and Fastboot'(https://forum.xda-developers.com/showthread.php?t=2317790)
Baixe o ultimo firmware disponivel neste site: https://mirrors.lolinet.com/firmware/moto/montana_retcn/official/RETCN/
Extraia ele para a mesma pasta que você instalou o Minimal ADB
Agora nessa pasta, pressione Shift + Clique direito, selecione "Abrir janela de comando aqui"
Coloque seu aparelho em modo fastboot
Copie os códigos acima e clique com o botão direito na janela do CMD
Tudo já foi testado, não tem risco de brick pois comandos relacionados ao bootloader foram removidos.

From the only Firmware folder none of command will execute, You need to download
minimal adb fastboot Tools and extract anywhere in PC.
Than
You need to extract downloaded firmware zip file to fastboot Tools folder, and
Than
just copy attached file in the same folder,
Rename file from FlashRomZui.txt to FlashRomZui.bat
It will become Batch file...
In case by renaming it wont become batch file than open in notepad and save as FlashRomZui.bat in same folder it will become batch file for sure.
Now connect your phone to PC in bootloader mode
And just double click FlashRomZui.bat
Wait to end process... it will take 5 to 7 Minutes
Copy past commands one by one can make it complicated for beginners...
Cheers

Sorry if stupid question , but does the bootloader get locked after the operation ? And also , is it necessary to overwrite the recovery too ? Cause i saw the line. And if so , can i put TWRP back with no problem ?

bogdanwp said:
Sorry if stupid question , but does the bootloader get locked after the operation ? And also , is it necessary to overwrite the recovery too ? Cause i saw the line. And if so , can i put TWRP back with no problem ?
Click to expand...
Click to collapse
No, the bootloader remains unlocked.
The Stock recovery is needed just for first boot, after that u can flash and use TWRP normally

zahidm said:
From the only Firmware folder none of command will execute, You need to download
minimal adb fastboot Tools and extract anywhere in PC.
Than
You need to extract downloaded firmware zip file to fastboot Tools folder, and
Than
just copy attached file in the same folder
Click to expand...
Click to collapse
Well said my friend, I'll edit my thread.

VulgarusBR said:
No, the bootloader remains unlocked.
The Stock recovery is needed just for first boot, after that u can flash and use TWRP normally
Click to expand...
Click to collapse
Thank you ! I went ahead and found out on my own. Confirmed working without problems for me.
---
L.E. : good rom , fast , to much bloatware , to much chinese. Went back to lineage 14 and no more fingerprint sensor. Any help please ?

bogdanwp said:
Thank you ! I went ahead and found out on my own. Confirmed working without problems for me.
---
L.E. : good rom , fast , to much bloatware , to much chinese. Went back to lineage 14 and no more fingerprint sensor. Any help please ?
Click to expand...
Click to collapse
You flashed nougat and no more fingerprint? When you back to LOS 14 nougat?

zahidm said:
You flashed nougat and no more fingerprint? When you back to LOS 14 nougat?
Click to expand...
Click to collapse
I fastbooted zui and no more fingerprint when back to LOS 14 yes. Also after i restored my original image that i always keep , still no fingerprint

bogdanwp said:
I fastbooted zui and no more fingerprint when back to LOS 14 yes. Also after i restored my original image that i always keep , still no fingerprint
Click to expand...
Click to collapse
1: Download below file from link.
https://mega.nz/#!Az5EBYxC!_fqx-2iHD9KiddRwTgd3yharQ61jINDOcYjNLJnE-d4
2: Extract anywhere in PC
3: connect Mobile in Bootloader mode
4: Go to folder
5: Duble click file flash downgrade.bat
Wait and reboot
If still Won't get fingerprint, than please tell.

zahidm said:
1: Download below file from link.
https://mega.nz/#!Az5EBYxC!_fqx-2iHD9KiddRwTgd3yharQ61jINDOcYjNLJnE-d4
2: Extract anywhere in PC
3: connect Mobile in Bootloader mode
4: Go to folder
5: Duble click file flash downgrade.bat
Wait and reboot
If still Won't get fingerprint, than please tell.
Click to expand...
Click to collapse
Ayyyy , it's working ! Thank you mate. You're a lifesaver.

bogdanwp said:
Ayyyy , it's working ! Thank you mate. You're a lifesaver.
Click to expand...
Click to collapse
Welcome. Cheers

Is there easy way to uninstall zui?

Lmaocetong said:
Is there easy way to uninstall zui?
Click to expand...
Click to collapse
Yes flash stock

What exactly is this? Any screenshots???