Has anyone found a screen protector for the phone which works well with a case? My case seems to lift my screen protector up at the top edge which causes air underneath it. Is there an alternative for a slightly smaller screen/phone which would work better? Any advice would be appreciated!
jonmc1980 said:
Has anyone found a screen protector for the phone which works well with a case? My case seems to lift my screen protector up at the top edge which causes air underneath it. Is there an alternative for a slightly smaller screen/phone which would work better? Any advice would be appreciated!
Click to expand...
Click to collapse
This belongs in "Accessories".
Apologies can an admin move it for me please
You apply liquid crystal screen protector which is available on Amazon
Related
Anybody ever try this?
http://www.att.com/shop/wireless/accessories/screen-protectors/sku6280704.html#fbid=rkaXUfy0tjG
I haven't tried it but it sounds very interesting. Be very careful when you choose a screen protector. I have had a Copter screen protector on my Note 2 now for 2 days and it looks like a dartboard. It's to soft for the. S-Pen stylus. Even before the damage caused by the S-Pen reading small text was impossible due to the structure of the plastic film. $20 down the drain.
Interesting find. I have moshi palm guard for my 17" mbp since day one and it's held up very well against my watch and tungsten bracelet.
interesting for sure.... I am waiting for Spigen to release there glass cover for the SN2. I am happy with there lines of things. I picked up the Valentinus however a bit leery since my cards and all touch the screen.
mzimand said:
Anybody ever try this?
http://www.att.com/shop/wireless/accessories/screen-protectors/sku6280704.html#fbid=rkaXUfy0tjG
Click to expand...
Click to collapse
I tried it with my Note 1, and didn't like it at all. Although it did protect the screen and was definitely reusable, I always saw it and found it obscured the screen too much for me.
If you like the "anti-glare" versions of other screen protectors you will like it. There is only adhesive on the outer rim so it is impossible to get a bubble on the actual display. However like other anti-glare protectors it will reduce visibility.If you are used to the crystal clear protectors I would not recommend it.
webdave said:
If you like the "anti-glare" versions of other screen protectors you will like it. There is only adhesive on the outer rim so it is impossible to get a bubble on the actual display. However like other anti-glare protectors it will reduce visibility.If you are used to the crystal clear protectors I would not recommend it.
Click to expand...
Click to collapse
I was wondering how it adhered to the screen, thanks for the info.
I really like going without a screen protector but I am thinking that it will add strength to the screen in case it drops or bends(sit on it)
Spigen said they aren't making it due to the curved glass.
Sent from my GT-N7100
mzimand said:
I was wondering how it adhered to the screen, thanks for the info.
I really like going without a screen protector but I am thinking that it will add strength to the screen in case it drops or bends(sit on it)
Click to expand...
Click to collapse
I don't think it will give it any more strength. The protector itself is not that rigid.
I'm looking for a screen protector that only has the cut out for the front camera. I find it unnecessary that there cut outs for the proximity sensor. on a lot of screen protectors I have seen. Anyone have any recommendations?
http://www.amazon.com/gp/product/B00P8V5J4I/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
This one seems to have a cutout only for the camera, and a 2.5d edge to fit the our 2.5d glass. Someone else in the screen protector thread recommended it, so I just ordered it last night. I'll let you know how it works out.
joshm.1219 said:
http://www.amazon.com/gp/product/B00P8V5J4I/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
This one seems to have a cutout only for the camera, and a 2.5d edge to fit the our 2.5d glass. Someone else in the screen protector thread recommended it, so I just ordered it last night. I'll let you know how it works out.
Click to expand...
Click to collapse
Great. I might consider it. I was actually hoping to find a plastic screen protector.
Someone said in their review that the glass screen protector cut out isn't as pictured.
The only problem is the protector I received was not the same as pictured. The top of the protector was not cut as pictured. instead of having a small cutout in the center for the cameral lens, there was a larger cutout of 5/8ths of an inch starting just right of the lens going left. Therefore the lens is not covered, but there is an odd unprotected gap at the top of the protector.
Click to expand...
Click to collapse
joshm.1219 said:
http://www.amazon.com/gp/product/B00P8V5J4I/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
This one seems to have a cutout only for the camera, and a 2.5d edge to fit the our 2.5d glass. Someone else in the screen protector thread recommended it, so I just ordered it last night. I'll let you know how it works out.
Click to expand...
Click to collapse
Please let us know how the glass screen protector is for you. I've used one once, and it was really nice to have that sort of quality, but it started to peel off after about two months of usage. Maybe that's normal, though. Idk...
Okay so I have the device for over a month now and only now I managed to find a screen protector for it. But as soon as I applied it, the bottom part of screen won't respond to touch anymore unless I am touching the metal bezel. So basically if I try to use my phone as it lies down anywhere, I can't. I'll have to pick it up in my hand. I then even tried with a different tempered screen protector but the issue remained. Though the touch works perfectly fine without the tempered glass on.
I understand how capacitive touch screens work but I believe if the touch works fine without the screen protector, there should not be any such issue with it. Is my device defective? Any help would be appreciated.
I'm having the same problem in a lesser degree. Since putting a tempered glass, the very bottom of the navigation bar is unresponsive (while I didn't have any problems before putting the tempered glass on). I'm using a cheap tempered glass so it's been my guess that it's not a good quality product, which explains the touch screen issue.
I didn't try another tempered glass since I got used to using the top bar of the navigation bar so I don't know if the problem occurs with all tempered glasses. I bought a couple of plastic screen protectors if I get tired of the problem.
DadOudidOuda said:
I'm having the same problem in a lesser degree. Since putting a tempered glass, the very bottom of the navigation bar is unresponsive (while I didn't have any problems before putting the tempered glass on). I'm using a cheap tempered glass so it's been my guess that it's not a good quality product, which explains the touch screen issue.
I didn't try another tempered glass since I got used to using the top bar of the navigation bar so I don't know if the problem occurs with all tempered glasses. I bought a couple of plastic screen protectors if I get tired of the problem.
Click to expand...
Click to collapse
Did you try touching the metal bezel and then trying whether the navigation bar responds aptly or not. In my little understanding, touching any metal parts provides earthing to the circuit and facilitates transfer of electrons thereby improving touch function.
But I have never had any such issues with any of my previous devices.
SDhamija said:
Did you try touching the metal bezel and then trying whether the navigation bar responds aptly or not. In my little understanding, touching any metal parts provides earthing to the circuit and facilitates transfer of electrons thereby improving touch function.
But I have never had any such issues with any of my previous devices.
Click to expand...
Click to collapse
No, it doesn't change anything. It's the first time I'm using a tempered glass on one of my devices so I don't have any point of comparison.
I don't think the Motorola Service Centre is going to be of much of a help here as the device works just fine without the screen protector on.
Guess I'll have to find some plastic screen protectors and trust the Gorilla Glass 3.
Same with me, putting a tampered glass on made the bottom right portion of the screen very unresponsive, after taking it off, the sensitivity was fine.
Anyone know of a good plastic protector?
I took off the tempered glass and put a simple protective screen and the difference in screen responsiveness is amazing. It feels like a totally new touchscreen!
DadOudidOuda said:
I took off the tempered glass and put a simple protective screen and the difference in screen responsiveness is amazing. It feels like a totally new touchscreen!
Click to expand...
Click to collapse
It would really help if you could tell where you got the simple protective screen from.
No matter the device has gorilla glass 3 protection, but I still don't want to keep the screen exposed.
SDhamija said:
It would really help if you could tell where you got the simple protective screen from.
No matter the device has gorilla glass 3 protection, but I still don't want to keep the screen exposed.
Click to expand...
Click to collapse
I just bought the cheapest matte protective screen I could find on Amazon here in France. I don't remember the exact reference, just that it was coming from Germany (I usually buy protective screens made in Germany, I've never been disappointed so far).
Running the built in screen protector isn't possible. Too many issues with touch sensitivity. I did pop out the built in screen protector and applied my own. The problem is this causes a miss alignment with the power and volume buttons. So I'm assuming the thick but in protector helps line the phone up with the buttons. Is there something I can use, thin strip of foam, to help "push" into the case? Very frustrating, I really like this case over the commuter.
Sent from my SM-G935U using Tapatalk
gadget069 said:
Running the built in screen protector isn't possible. Too many issues with touch sensitivity. I did pop out the built in screen protector and applied my own. The problem is this causes a miss alignment with the power and volume buttons. So I'm assuming the thick but in protector helps line the phone up with the buttons. Is there something I can use, thin strip of foam, to help "push" into the case? Very frustrating, I really like this case over the commuter.
Click to expand...
Click to collapse
I had the same issue and nothing I did helped so I just bought the supcase unicorn beetle pro case. Even with my tempered glass screen protector, it fits perfectly and I still can use my volume and power button :good:
denson9874 said:
I had the same issue and nothing I did helped so I just bought the supcase unicorn beetle pro case. Even with my tempered glass screen protector, it fits perfectly and I still can use my volume and power button :good:
Click to expand...
Click to collapse
I did find a way, kind of. I hastily did this. I took some thin foam and lined the case where the screen protector was attached. That actually help line up the buttons pretty good. I have to go through and do a better job. I have the Beetle case, juts like the full rubber outside for grip.
What glass screen protector did you go with? I used to own an S7 about a year ago and ditched the glass screen protectors because they were terrible.
gadget069 said:
I did find a way, kind of. I hastily did this. I took some thin foam and lined the case where the screen protector was attached. That actually help line up the buttons pretty good. I have to go through and do a better job. I have the Beetle case, juts like the full rubber outside for grip.
What glass screen protector did you go with? I used to own an S7 about a year ago and ditched the glass screen protectors because they were terrible.
Click to expand...
Click to collapse
I went with the armorsuit HD. Been using their brand since my s6 edge and they have been working well.
denson9874 said:
I went with the armorsuit HD. Been using their brand since my s6 edge and they have been working well.
Click to expand...
Click to collapse
How is the touch sensitivity on the sides? Rain bowing effect on the glass?
gadget069 said:
How is the touch sensitivity on the sides? Rain bowing effect on the glass?
Click to expand...
Click to collapse
Surprisingly responsive of the edges and now looking at it, there is a little color distortion from the glass on o e of the corners ( most likely due to me having a good S7 Edge.) Other than that, no issues.
With the rounded side edges, this will not be an easy phone to fit screen protectors for. Please post if you find any others.
This is what I have found so far. All ship from China and take 4-6 weeks for delivery.
Vinyl:
Olixar brand on MobileFun website. $10.99
TPU:
AVIDET brand on Amazon website. $7.99
Glass:
HHUAN brand on Amazon website. $11.97
ZAGG InvisibleShield Ultra VisionGuard+ Screen Protector from Verizon
Great screen protector! Fits perfect with a case and includes a small one for the secondary screen. Easy install. Would def recommend
Whitestone Dome glass
Whitestone has a screen protector for the LG wing have anyone use Whitestone before any good?
I use Mi 10 Pro hydrogel screen protector . Just got a screen protector without the hole for the selfie camera. Cost around $1 per protector.
https://www.amazon.com/gp/product/B08L78S31X/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I got this one and fits perfectly and no bubbles after I installed it and left it overnight
Just got these, installed and now I cannot get my fingerprint to register. I deleted it retrained it with the screen protector on and still no luck.
Got these. Typically I steer clear of the screen protector film. I generally always go with the tempered glass screen protector. But since the fingerprint wouldn't work with the tempered glass and tried this film. See link below. Works great feels smooth like glass. Provides better grip also. I put one on the screen as well as on the back of the phone. I can open and close it with one hand now because there's a little extra grip on the screen. Fingerprint also works with these.
https://www.amazon.com/gp/aw/d/B08L78S31X?psc=1&ref=ppx_pop_mob_b_asin_title
kaluna00 said:
Got these. Typically I steer clear of the screen protector film. I generally always go with the tempered glass screen protector. But since the fingerprint wouldn't work with the tempered glass and tried this film. See link below. Works great feels smooth like glass. Provides better grip also. I put one on the screen as well as on the back of the phone. I can open and close it with one hand now because there's a little extra grip on the screen. Fingerprint also works with these.
https://www.amazon.com/gp/aw/d/B08L78S31X?psc=1&ref=ppx_pop_mob_b_asin_title
Click to expand...
Click to collapse
THX for the link, just ordered.
I typically don't use screen protectors at all, just the liquid sealers.
I'm actually more interested in using to cover the back of the phone.
Did you cut out a hole for the cameras,& if so, how did you go about doing so?
I plan on using my Spigen case to trace out & cut w/an X-Acto knife.
Considered getting a skin for the Galaxy S20/S20 + (closest I could find, dimension wise), but, it'd still need some alterations, so, I skipped that idea.
If anyone finds a bodyskin for the Wing, please post a link in this thread.
KOLIOSIS said:
THX for the link, just ordered.
I typically don't use screen protectors at all, just the liquid sealers.
I'm actually more interested in using to cover the back of the phone.
Did you cut out a hole for the cameras,& if so, how did you go about doing so?
I plan on using my Spigen case to trace out & cut w/an X-Acto knife.
Considered getting a skin for the Galaxy S20/S20 + (closest I could find, dimension wise), but, it'd still need some alterations, so, I skipped that idea.
If anyone finds a bodyskin for the Wing, please post a link in this thread.
Click to expand...
Click to collapse
I cut a notch around all three cameras. I figured it would at least protect the back of the phone when I get my case. For now hopefully it'll help it not get scratched
Front screen, bottom screen, and back have the film on them... Liking it.
Has anyone found a tempered glass screen protector that the the finger print sensor works through?
I ordered a Spigen case from Amazon, but decided to upgrade to a better one I found at a T-Mobile store. I have AT&T and it didn't matter at all in regards to the accessories I got today. They also had a screen protector which I purchased as well. It's pricey compared to amazon, it has more support on the sides than the Spigen one does. The screen protector I bought wasn't an Invisishield, it's a Case Mate and it's working very well for me. Just wanted to thrown that out there in case it cam help anyone.
Is the Case-Mate a tempered glass screen protector or a film?
Thanks for sharing
There is a tempered glass screen protector on Amazon. It's made by UniqueMe. Only sticks at the edges, but fits well and wraps around the curved screen. Feels great to the touch. And touchscreen sensitivity works extremely well. Optically, I'd give it an 8 out of 10.
When installing, you need to line it up with the bottom edge of the screen so that there is a gap at the top. This is needed to let the light dimming sensor see out. Also, it is quite fragile. I dropped my phone into a soft bath mat and the screen protector cracked.
Already on my third UniqueMe. Fingerprint sensing works decently. You have to get the hang of it. If possible, definitely re-enroll your finger prints after installing the protector. Works much better that way.
Amazon.com: [2 Pack] UniqueMe Screen Protector for LG Wing 5G Tempered Glass, 3D Full Coverage Film HD [Easy Installation] Edge to Edge Protection : Cell Phones & Accessories
Buy [2 Pack] UniqueMe Screen Protector for LG Wing 5G Tempered Glass, 3D Full Coverage Film HD [Easy Installation] Edge to Edge Protection: Screen Protectors - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
kaluna00 said:
Is the Case-Mate a tempered glass screen protector or a film?
Thanks for sharing
Click to expand...
Click to collapse
You’re welcome and according to their site it’s one of each for each screen. It‘s working very well for me so far. I like it. Also, if the link has to be removed for a rule violation I’m unaware of mods please do so.
Anyone knows if theres a privacy screen protector tpu film for the LG wing thats really good
I hope it is there
This is all I got doesn't make me feel very protected
Ohiojeff said:
This is all I got doesn't make me feel very protected
Click to expand...
Click to collapse
WING Front Screen Case / Protector
This is only first gen., but if I had some of these available. Would anybody be interested in using these?
forum.xda-developers.com
kaluna00 said:
WING Front Screen Case / Protector
This is only first gen., but if I had some of these available. Would anybody be interested in using these?
forum.xda-developers.com
Click to expand...
Click to collapse
I bought 2 from you. I like the idea but a hard rubber material would be much better than the plastic. Both of mine have broken from 1st drops. They did protect the front screen though.