Sharing S9/S9+ Roms From chinese devs - Samsung Galaxy S9 Guides, News, & Discussion

I'm not the dev just sharing some roms for snapdragon s9/s9+ that i found from chineses,both roms have rom control and some mods
Flashing Steps
Make a backup of u carrier configs partition on twrp ,this roms will flash chinese csc at end u can restore u original csc
1.Flash the rom
2.Flash KG STATUS/Pay Services lock fix https://drive.google.com/file/d/1ZZh9ke5TLj7diBM6EfCG1u1-FJKi_JQc/view?usp=sharing
3.Flash Klabit kernel https://forum.xda-developers.com/ga...velopment/sm-g9650-sm-g9600-pie-root-t3900816
4.restore carrier configs partition and reboot,if u have single sim phone go to build.prop and change the line ro.multim from 2 to 1 and delete the line import/efs/factory.prop
Dont instal gapps after inicial setup u can use the google account, on soul rom m will need to instal play store apk
at firsth boot it will loop on samsung logo, just force reboot and it will start, later u can remove the chinese apps
Tomato Rom CSE5 May Security Patch: https://drive.google.com/file/d/165Y_6OSK__Mq4AqhZh9IaoSaW9NRTQkr/view?usp=sharing
Soul Rom CSE5 May Security Patch: https://drive.google.com/file/d/1xWqnoll-7AxOyOmsJuhilrh3Gbht_tS5/view?usp=sharing
Thanks to @klabit87 for the kernel and @corsicanu for the kg fix

Fala brow... Top hein!
Qual a diferença dos 2? Qual o melhor?
E o que seria #4? Como faz isso?
Absssss

thalesbraga said:
Fala brow... Top hein!
Qual a diferença dos 2? Qual o melhor?
E o que seria #4? Como faz isso?
Absssss
Click to expand...
Click to collapse
Twrp> restore> odm or carrier configs its the original
csc
Eu gosto mais da tomato pq tem o rom control mais simples com menos mod

Ellcid01 said:
Twrp> restore> odm or carrier configs its the original
csc
Eu gosto mais da tomato pq tem o rom control mais simples com menos mod
Click to expand...
Click to collapse
Chinesse lang in mod menu translate to english?
Enviado desde mi SM-G9650 mediante Tapatalk

megaxp said:
Chinesse lang in mod menu translate to english?
Enviado desde mi SM-G9650 mediante Tapatalk
Click to expand...
Click to collapse
Yep

hi!
Can I flash this rom on a single sim phone? (G9600)
because I have already flashed Chinese roms and they are all for dual sim and it does not allow me to activate the mobile data.
thanks

kartu_800 said:
hi!
Can I flash this rom on a single sim phone? (G9600)
because I have already flashed Chinese roms and they are all for dual sim and it does not allow me tot activate the mobile data.
thanks
Click to expand...
Click to collapse
Dont know i have one dual sim,make a backup and save u original carrier configs and build prop and try if u want

Ellcid01 said:
Twrp> restore> odm or carrier configs its the original
csc
Eu gosto mais da tomato pq tem o rom control mais simples com menos mod
Click to expand...
Click to collapse
fala bro, testei os 2, nenhum dá pra configurar a conta do google, só samsung account na inicialização?
tentei instalar opengapps pelo twrp e também não deu a inicialização quebra.
valeus!

thalesbraga said:
fala bro, testei os 2, nenhum dá pra configurar a conta do google, só samsung account na inicialização?
tentei instalar opengapps pelo twrp e também não deu a inicialização quebra.
valeus!
Click to expand...
Click to collapse
Kkk n da na inicialização só depois, n precisa instalar o gapps tem uma delas q é so instalar o apk da play store
Dont instal gapps after inicial setup just need to instal google play apk on soul rom

thalesbraga said:
Fala brow... Top hein!
Qual a diferença dos 2? Qual o melhor?
E o que seria #4? Como faz isso?
Absssss
Click to expand...
Click to collapse
thalesbraga said:
fala bro, testei os 2, nenhum dá pra configurar a conta do google, só samsung account na inicialização?
tentei instalar opengapps pelo twrp e também não deu a inicialização quebra.
valeus!
Click to expand...
Click to collapse
Please post in English only. If a second language is required, please post the English comment first, as I have here. Thank you.
कृपया अंग्रेजी में ही पोस्ट करें। यदि दूसरी भाषा की आवश्यकता है, तो कृपया अंग्रेजी टिप्पणी पहले पोस्ट करें, जैसा कि मैंने यहां दिया है। धन्यवाद।
krpaya angrejee mein hee post karen. yadi doosaree bhaasha kee aavashyakata hai, to krpaya angrejee tippanee pahale post karen, jaisa ki mainne yahaan diya hai. dhanyavaad.

Ellcid01 said:
Kkk n da na inicialização só depois, n precisa instalar o gapps tem uma delas q é so instalar o apk da play store
Dont instal gapps after inicial setup just need to instal google play apk on soul rom
Click to expand...
Click to collapse
i saw, but you cant restore google account data, wifi, password, backup etc... can it?

thalesbraga said:
i saw, but you cant restore google account data, wifi, password, backup etc... can it?
Click to expand...
Click to collapse
I didint try but i think u can doo this on settings

Ellcid01 said:
Dont know i have one dual sim,make a backup and save u original carrier configs and build prop and try if u want
Click to expand...
Click to collapse
doesn't work for me, i cant still activate mobile data.
everything else works fine, but without mobile data in single sim.

help if possible
hello where did you get the tomato rom from? is there a direct link to the chinese dev page where you got this from? The rom is working but my data isn't, can't get any service, I have tried a lot of things. I have AT&T, live in east coast USA.

could someone activate the mobile data in any of these roms? I try tomato, soul and aurora roms, in none can activate the data, the rest works well. G9600

I fixed Mobile Data on singlesim by changing something in the default.prop I cant exactly remember what I changed as I'm no longer on one of these roms. But if someone posts a picture of there default.prop I can tell them what to change to fix it.

tigras54 said:
hello where did you get the tomato rom from? is there a direct link to the chinese dev page where you got this from? The rom is working but my data isn't, can't get any service, I have tried a lot of things. I have AT&T, live in east coast USA.
Click to expand...
Click to collapse
https://www.tomatolei.com/forum.php?mod=viewthread&tid=169453

Bren123 said:
I fixed Mobile Data on singlesim by changing something in the default.prop I cant exactly remember what I changed as I'm no longer on one of these roms. But if someone posts a picture of there default.prop I can tell them what to change to fix it.
Click to expand...
Click to collapse
This line, change to 1

kartu_800 said:
could someone activate the mobile data in any of these roms? I try tomato, soul and aurora roms, in none can activate the data, the rest works well. G9600
Click to expand...
Click to collapse
If u have single sim change on build prop the line
ro.multsim from 2 to 1

Ellcid01 said:
This line, change to 1
Click to expand...
Click to collapse
Yup that was it.

Related

(I9082L) [It`s not a question, but a solution] Modem .tar For cm10.1

Hey guys, my friend kowakx told me he found a solution for the problem with CM10.1 signal for the I9082L and asked me to make e new Thread.
ONLY FOR I9082L
link: http://www.mediafire.com/download/ijtxn8ecmyq5to8/Dcamc1.tar.md5 (i didn't know if i could post an extornal link, sorry)
Installation Method
1: Place your i9082l in download mode (Odin mode) vol-+ home + power
2: flash the Modem tar.md5 on odin 3.04 (use PDA)
3: after modem flash. in the Cm10.1 cwm flash zip and gapps (optional)
4: enjoy your android 4.2.2
are tested on the network do not know if Tim is compatible with oi, vivo,claro
thanks for pawitp developer is Cm10.1 for SGG
IT WAS CONFIRMED THAT NOW YOU CAN INSTALL EVERY ROM IN I9082L AND THEN FLASH THE MODEM THAT IT WILL WORK!!
querobolo said:
Hey guys, my friend kowakx told me he found a solution for the problem with CM10.1 signal for the I9082L and asked me to make e new Thread.
ONLY FOR I9082L
link: http://www.mediafire.com/download/ijtxn8ecmyq5to8/Dcamc1.tar.md5 (i didn't know if i could post an extornal link, sorry)
Installation Method
1: Place your i9082l in download mode (Odin mode) vol-+ home + power
2: flash the Modem tar.md5 on odin 3.04 (use PDA)
3: after modem flash. in the Cm10.1 cwm flash zip and gapps (optional)
4: enjoy your android 4.2.2
are tested on the network do not know if Tim is compatible with oi, vivo,claro
thanks for pawitp developer is Cm10.1 for SGG
Click to expand...
Click to collapse
Trying right now!! What was the problem?
Do you use TIM?
gfcpinto said:
Trying right now!! What was the problem?
Do you use TIM?
Click to expand...
Click to collapse
Yes i use it, and it's working perfectly.
querobolo said:
Yes i use it, and it's working perfectly.
Click to expand...
Click to collapse
Can you please organize the Original Thread post a little?
I flashed the modem on ODIN after flashing CM10.1 and gapps, and it's working! So I think it can be done either way. right?
IT WORKs
Does it work for i9082 rom with same issues on i9082L devices?
Sent from my GT-I9082L using Tapatalk 2
hayabusa08 said:
Does it work for i9082 rom with same issues on i9082L devices?
Sent from my GT-I9082L using Tapatalk 2
Click to expand...
Click to collapse
No, this is specific for the L model, but you can get here in the forum the right modem for you.w
Someone tested with Claro OP?
Thx.
EDIT
To instal need to extract?
the step is like
instal cyano after google apps after do odin with the modem?
Thx
Math_Apolo said:
Someone tested with Claro OP?
Thx.
EDIT
To instal need to extract?
the step is like
instal cyano after google apps after do odin with the modem?
Thx
Click to expand...
Click to collapse
Cara, primeiro vc faz o flash do modem pelo odin e depois faz o flash da ROM e dos GAPPS pelo cwm.(Nada precisa ser extraido.)
querobolo said:
Cara, primeiro vc faz o flash do modem pelo odin e depois faz o flash da ROM e dos GAPPS pelo cwm.(Nada precisa ser extraido.)
Click to expand...
Click to collapse
Vlw pela resposta bro,
como voce disse, me veio outra duvida
eu "flasheio" o modem pelo odin, com a rom stock instalada antes mesmo de por a cm10?
Obrigado.
"to esperando o celular ter carga aqui para poder instalar de novo o cm10"
Pls link this thread to original cm 10.1 forum.. So a newbie can easily solve out this problem...
Sent from Gt-I9082 stock AMD6 firmware
Math_Apolo said:
Vlw pela resposta bro,
como voce disse, me veio outra duvida
eu "flasheio" o modem pelo odin, com a rom stock instalada antes mesmo de por a cm10?
Obrigado.
"to esperando o celular ter carga aqui para poder instalar de novo o cm10"
Click to expand...
Click to collapse
Eu instalei dps, mas tem gente que instala primeiro, deve funcionar dos dois jeitos. Não fui eu que escrevi o tutorial, foi um cara que me pediu para postar...hahah
Galera, sei que êh mais fácil para nos falar portuga, mas pensem que suas respostas poderiam ajudar outras pessoas que não entendem nosso tupinikin...
Vamos ajudar os gringos....
Hheheheh
Sent from my iPad using Tapatalk
Brasilian guys....please......english. this is an Internaconal forum. Thanks
Sent from my GT-I9082 using xda app-developers app
EclipseX said:
Brasilian guys....please......english. this is an Internaconal forum. Thanks
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
They were asking if they had to install the modem before or after flashing cm10.1, but it doesn't matter
EclipseX said:
Brasilian guys....please......english. this is an Internaconal forum. Thanks
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
This is what i asked above "In portuguese"
Hheheheh
Sent from my iPad using Tapatalk
wait .. let me see if I understand
My friend has a "L" and if I want to install a ROM I9082 the only conflict is the modem, if I install the ROM after you have problem, just send me the modem is "okay"?
PORTUGUESE:
espera.. deixa eu ver se eu entendi
meu amigo tem um "L" e se eu quiser instalar uma ROM do I9082 o único conflito é o modem, se eu depois que instalar a ROM tiver problema, é só eu mandar o modem que fica "tudo bem"?
jonatasneves13 said:
wait .. let me see if I understand
My friend has a "L" and if I want to install a ROM I9082 the only conflict is the modem, if I install the ROM after you have problem, just send me the modem is "okay"?
PORTUGUESE:
espera.. deixa eu ver se eu entendi
meu amigo tem um "L" e se eu quiser instalar uma ROM do I9082 o único conflito é o modem, se eu depois que instalar a ROM tiver problema, é só eu mandar o modem que fica "tudo bem"?
Click to expand...
Click to collapse
Yes man, you just install a normal i9082 rom and then flash the modem file via odin and it will work!!!
jonatasneves13 said:
wait .. let me see if I understand
My friend has a "L" and if I want to install a ROM I9082 the only conflict is the modem, if I install the ROM after you have problem, just send me the modem is "okay"?
PORTUGUESE:
espera.. deixa eu ver se eu entendi
meu amigo tem um "L" e se eu quiser instalar uma ROM do I9082 o único conflito é o modem, se eu depois que instalar a ROM tiver problema, é só eu mandar o modem que fica "tudo bem"?
Click to expand...
Click to collapse
So far, that's only happening to the unnoficial CM10.1. The other custom roms from the Android Development went well on TIM for example.
translation: Até agora, isso só aconteceu com a CM 10.1. As outras custom roms do forum rodaram bem na TIM, por exemplo.
Its blecause orher Roms are based on 9082l and cm is based on 9082 (no L)
This is the reason that us 9082L user must flash modem.
Sent from my iPad using Tapatalk
I have a problem with my 3G now... with my stock rom, really doen't like the cm10.1 atm (but its not the point)
the 3G is like bliking, when you got data transfering the signal turn totally off and back again, and when got data again it turn off the signal; have a way to flash the original modem?
Eu to tendo problema com o 3G agora... com minha rom stock, realmente nao gostei do cm10.1 no momento (mas essa nao é a questao)
o 3G fica "piscando" exemplo, vc liga o dados, na hora q vc vai receber dados, cai seu sinal total, dai volta, e volta junto o 3G, quando o 3G vai puxar dados, cai de novo e fica assim sem poder usar... Por acaso tem como por o modem original de volta?
Thx and sorry english...

Samsung S3 I9300 Sim unlock With MIUIhome- Portugal

Hello, a cousin of mine asked me to Sim Unlock his phone, I've read quite some threads on the subject but I believe the OS of the phone is the problem.
The Phone is using some kind of Xiaomi OS.
Can someone help me with this ?
MIUI Version: MIUI-3.11.29
Android Version: 4.2.2 JDQ39
Model: GT-I9300
Tried already to root with APP: KINGROOT and unlocking With GalaxSim Unlock but it says that the phone has some kind of blockade.
Also tried the *#197328640# but give MMI error
Thanks in advance, José Alves
Just realised that i've put this in the wrong forum.
Sorry, this is for i9305 not 9300 if admins could move it to i9300 section and not delete i'd appreciate it. tyty
Try to install other OS or try some other app.
tl;dr Instala outra rom.
Wrong Thread Title & Description
JFAlves said:
...Model: GT-I9300...
Click to expand...
Click to collapse
JFAlves said:
Just realised that i've put this in the wrong forum.
Sorry, this is for i9305 not 9300 if admins could move it and not delete i'd appreciate it. tyty
Click to expand...
Click to collapse
Your thread was moved to the i9305 forum but could you please edit your thread title that says I9300 @ the present as well as your post #1 that says "Model: GT-I9300" please?
I wasted my time clicking on this thread as I am interested in the i9300 but not in the i9305.
***
curiousrom said:
Your thread was moved to the i9305 forum but could you please edit your thread title that says I9300 @ the present as well as your post #1 that says "Model: GT-I9300" please?
I wasted my time clicking on this thread as I am interested in the i9300 but not in the i9305.
***
Click to expand...
Click to collapse
sorry i cant change to i9305 cause my mobile is i9300 but it has MIUI rom.
JCFB said:
Try to install other OS or try some other app.
tl;dr Instala outra rom.
Click to expand...
Click to collapse
How do i change and how do i choose the correct rom? is there a way to go back to the original one ?
Como e que escolho a rom que devo instalar? há maneira de mudar para a rom original ? Penso que o telemovel tenha vindo assim porque o dono não sabe mudar roms etc. é um utilizador basico
JFAlves said:
How do i change and how do i choose the correct rom? is there a way to go back to the original one ?
Como e que escolho a rom que devo instalar? há maneira de mudar para a rom original ? Penso que o telemovel tenha vindo assim porque o dono não sabe mudar roms etc. é um utilizador basico
Click to expand...
Click to collapse
Search for lineageos.
Vê na net tutoriais para instalar a lineageos nesse telemóvel. Há uma carrada de tutoriais no youtube e outros sites.
Ou em alternativa podes instalar a stock rom.
JCFB said:
Search for lineageos.
Vê na net tutoriais para instalar a lineageos nesse telemóvel. Há uma carrada de tutoriais no youtube e outros sites.
Ou em alternativa podes instalar a stock rom.
Click to expand...
Click to collapse
mas alguma dessas me vai permitir desbloquear o telemovel para as outras redes ? / usar aquele codigo " *#197328640#"?
<mod edit: translation done with google translate>
but will any of these allow me to unlock the mobile phone for the other networks? / use that code "* # 197328640 #"?
LineageOS or Samsung Firmware on GT-i9300
JFAlves said:
sorry i cant change to i9305 cause my mobile is i9300 but it has MIUI rom.
Click to expand...
Click to collapse
JFAlves said:
How do i change and how do i choose the correct rom? is there a way to go back to the original one ?
Click to expand...
Click to collapse
Turn off the phone & look under the battery.
If the sticker says GT-I9300 then go here: S3 i9300 LineageOS Super Clean Install & Samsung Firmware
You can choose to install the stock Samsung 4.3 firmware or LineageOS 14.1 based on Nougat 7.1.2 which is the best custom firmware for the GT-I9300 @ the present IMO.
The GT-I9300 is unlocked by default in both those options.
***
JFAlves said:
mas alguma dessas me vai permitir desbloquear o telemovel para as outras redes ? / usar aquele codigo " *#197328640#"?
Click to expand...
Click to collapse
Eu não tenho resposta para isso pois o meu telemóvel já vinha desbloqueado, mas penso que com a lineageos ou com uma rom touchwiz 4.3 ou 4.4 deva funcionar.
Entretanto exprimenta instalar a lineageos primeiro, se isso não funcionar exprimenta a lineageos.
E verifica se tens o i9300 ou o i9305
<mod edit: translation done with google translate>
I have no answer for this because my phone was already unlocked, but I think that with the lineage or with a touchwiz rom 4.3 or 4.4 should work.
Meanwhile, install the lineage first, if that does not work for the lineage.
And check to see if you have the i9300 or i9305
JFAlves said:
mas alguma dessas me vai permitir desbloquear o telemovel para as outras redes ? / usar aquele codigo " *#197328640#"?
<mod edit: translation done with google translate>
but will any of these allow me to unlock the mobile phone for the other networks? / use that code "* # 197328640 #"?
Click to expand...
Click to collapse
JCFB said:
Eu não tenho resposta para isso pois o meu telemóvel já vinha desbloqueado, mas penso que com a lineageos ou com uma rom touchwiz 4.3 ou 4.4 deva funcionar.
Entretanto exprimenta instalar a lineageos primeiro, se isso não funcionar exprimenta a lineageos.
E verifica se tens o i9300 ou o i9305
<mod edit: translation done with google translate>
I have no answer for this because my phone was already unlocked, but I think that with the lineage or with a touchwiz rom 4.3 or 4.4 should work.
Meanwhile, install the lineage first, if that does not work for the lineage.
And check to see if you have the i9300 or i9305
Click to expand...
Click to collapse
Hello,
please use english language on XDA as stated by XDA forum rule #4.
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse
Thank you
Wood Man
Senior Moderator

A95x F4 S905x4 Magisk / Root

Has anyone managed to install magisk on a95x f4 tv box? how? Is it stable?
I've tried unpacking the stock firmware, patching the boot.PARTITION on magisk, and repacking it, causing a bootloop. Root apps dont work. Any ideas?
someone has the link for Android 11 ?? Here are 2 but they are empty, I haven't found it yet, I made contact with the manufacturer with no response yet :/
Maybe this roundabout Tanix X4 ROM? I have not tried yet.
https://forum.xda-developers.com/t/...root-a95x-f4-android-11-rom-com-root.4443429/
You likely have verity enabled, you need to patch the kernels to boot flag 2 so it bypasses, you need to patch vendor boot and boot, but will likely get N/A if its pre-rooted, as you need to remove all root traces, and its more then just removing a previous su binary. All the scripting called through init etc. There is a lot of stuff that needs editing for Magisk to work, I have gotten it working on a few android 11 devices. Working on a method hopefully that does not take so long by using a script. But we will see. Cheers.
I will try slimbox rom, I saw some pictures about that has root.
slimbox android 9
If you just decompile the firmware, you can add root easy, you need a few flags added to the kernel and to a build.prop. its a little different but not much. I have done 4 - X4 revisions, android 12 revisions or 3588, its all the same. If anyone needs the flags or help just let me know. Happy to pass knowledge since most rom devs hold their secrets instead of actually helping people, Just saying....
Here are a few flags you can add to the kernel and to the prop.... Read about what they mean before just doing something so I am not blamed. You can easily decompile any firmware and its images manually or with tools, I have my own SDK and tools I have written. But You can patch most of kernels as long as they have a ramdisk. Hope this helps someone. Cheers --Dataghost
ro.secure=1
security.perf_harden=1
ro.adb.secure=0
ro.boot.flash.locked=0
ro.allow.mock.location=0
ro.debuggable=1
ro.oem_unlock_supported=1
dataghost2014 said:
Aqui estão alguns sinalizadores que você pode adicionar ao kernel e ao prop.... Leia sobre o que eles significam antes de fazer algo para que eu não seja culpado. Você pode descompilar facilmente qualquer firmware e suas imagens manualmente ou com ferramentas, tenho meu próprio SDK e ferramentas que escrevi. Mas você pode corrigir a maioria dos kernels, desde que tenham um ramdisk. Espero que isso ajude alguém. Atenciosamente --Dataghost
ro.seguro=1
security.perf_harden=1
ro.adb.secure=0
ro.boot.flash.locked=0
ro.allow.mock.location=0
ro.debuggable=1
ro.oem_unlock_supported=1
Click to expand...
Click to collapse
olá assim , fiquei empolgado com seu POST . Posso alterar o default.prop na pasta vendor, usando seu texto POST, mas não entendo e não consigo alterar o kernel, poderia me dizer como? Estou tentando colocar magisk na rom do android 10 A95x4, se puder me ajudar eu agradeço.
Mod translation: hello so , I was excited about your POST . I can change the default.prop in the vendor folder, using your POST text, but I don't understand and I can't change the kernel, could you tell me how? I'm trying to put magisk in the android 10 A95x4 rom, if you can help me, I'd appreciate it.
marciobill said:
olá assim , fiquei empolgado com seu POST . Posso alterar o default.prop na pasta vendor, usando seu texto POST, mas não entendo e não consigo alterar o kernel, poderia me dizer como? Estou tentando colocar magisk na rom do android 10 A95x4, se puder me ajudar eu agradeço.
Click to expand...
Click to collapse
I have translated it so I am hoping it will be close, you can decompile the kernel, you. Any rom that has any form of root should have that removed, init portions, start up services etc, sometimes you will have boot ramdisk and sometimes you will have vendor boot ramdisk depending on the version of android, you need to edit those props as well, if its a user firmware or eng you will have to add flags so its able to start adbd root. These are just some quick notes. When I build a firmware from the ground up I do a lot of things, but those are just a few things you will need to add. You can aldo disable AVB, you can use Android Boot Editor, AIK as well will work, I manually do this stuff, but these are methods that will work. So you will want to patch the vbmeta partitions as well. This method works on roms I created on 10, 11 and 12. If you need more guidance let me know. Cheers.
dataghost2014 said:
I have translated it so I am hoping it will be close, you can decompile the kernel, you. Any rom that has any form of root should have that removed, init portions, start up services etc, sometimes you will have boot ramdisk and sometimes you will have vendor boot ramdisk depending on the version of android, you need to edit those props as well, if its a user firmware or eng you will have to add flags so its able to start adbd root. These are just some quick notes. When I build a firmware from the ground up I do a lot of things, but those are just a few things you will need to add. You can aldo disable AVB, you can use Android Boot Editor, AIK as well will work, I manually do this stuff, but these are methods that will work. So you will want to patch the vbmeta partitions as well. This method works on roms I created on 10, 11 and 12. If you need more guidance let me know. Cheers.
Click to expand...
Click to collapse
Obrigado, entendi o que vc escreveu ! Vou tentar por em prática . Se eu tiver alguma dúvida te chamo
Mod translation: Thank you, I understood what you wrote! I will try to put it into practice. If I have any questions, I'll call you
Ola amigo , vc por um acaso teria uma ROM img Android 9 para s905x4 ? Minha tv Box é uma hk1 x4 . Felicidades
Mod translation.....AGAIN! Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
@marciobill
Greetings. As a "last time" courtesy, I have translated your last 3 posts. I will politely ask you to please be respectful and observant of XDA Rule #4 for
all of future posts:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Your cooperation is expected and appreciated. Thank you.
-Regards: Badger50
Badger50 said:
@marciobill
Saudações. Como uma cortesia de "última vez" , traduzi seus últimos 3 posts. Pedirei educadamente que você seja respeitoso e observe a regra XDA nº 4 para
todos os posts futuros:
Spoiler: Regra XDA #4
4. Use o idioma inglês.
Entendemos que, com todas as diferentes nacionalidades, nem todos falam inglês bem, mas tente. Se você realmente não conseguir postar em inglês, use um tradutor online. Você pode incluir sua mensagem original em seu próprio idioma, abaixo da tradução para o inglês. (Esta regra cobre suas postagens, entradas de perfil e assinatura). Você pode tentar:- https://translate.google.com/ ou https://www.babelfish.com/ ou usar um de sua escolha.
Sua cooperação é esperada e apreciada. Obrigada.
-Atenciosamente: Badger50
Click to expand...
Click to collapse
marciobill said:
Ola amigo , vc por um acaso teria uma ROM img Android 9 para s905x4 ? Minha tv Box é uma hk1 x4 . Felicidades
Mod translation.....AGAIN! Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
Click to expand...
Click to collapse
I apologize for the misunderstanding, the translator on my cell phone is automatically translating into Portuguese even if I write in English. thank you for helping me , this mistake will not happen again
Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
marciobill said:
Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
Click to expand...
Click to collapse
No, I wrote an android 11 for that device.

QFIL FILES FOR BOTH

Seeing how the people with these files refuse to share, i had to pay to gain access to both of them. What's even worse is neither of them were able to fix my phone (not the files fault) ctfu. So i decided to share them myself . I even made a copy of every single partition using qfil and a new phone with the most up to date global rom. https://mega.nz/file/Tj4XkKxS#TCckKSDZ3i9fvKSlVRRO9Fb6BQHAYmHxlaCcyGMqTaI
Palese re-upload, It would be awesome 4 the community
Swan Saung said:
Link is dead ,My phone is dead plz help me
Click to expand...
Click to collapse
fixed. i had to reupload them. I'm pretty sure when i made that link it allowed others to edit them, so some scumbag went on there and deleted them
tinman4209333 said:
Seeing how the people with these files refuse to share, i had to pay to gain access to both of them. What's even worse is neither of them were able to fix my phone (not the files fault) ctfu. So i decided to share them myself . I even made a copy of every single partition using qfil and a new phone with the most up to date global rom. https://mega.nz/file/Tj4XkKxS#TCckKSDZ3i9fvKSlVRRO9Fb6BQHAYmHxlaC
Click to expand...
Click to collapse
How did you manage to back this up ?
I ask to know how to restore it
kurikikakaki said:
How did you manage to back this up ?
I ask to know how to restore it
Click to expand...
Click to collapse
In QFIL , under the tools tab you'll see partition manager. You can use that to either copy each partition individually or write/flash onto them.
How I use this in QFIL?
Hey dude tanks u so much for share this but all files end in .bin
tinman4209333 said:
Seeing how the people with these files refuse to share, i had to pay to gain access to both of them. What's even worse is neither of them were able to fix my phone (not the files fault) ctfu. So i decided to share them myself . I even made a copy of every single partition using qfil and a new phone with the most up to date global rom. https://mega.nz/file/Tj4XkKxS#TCckKSDZ3i9fvKSlVRRO9Fb6BQHAYmHxlaCcyGMqTaI
Click to expand...
Click to collapse
I restore this for each part of partition. but, imei lost, just 0.
do you know how to fix ?
tinman4209333 said:
Vendo como as pessoas com esses arquivos se recusam a compartilhar, tive que pagar para ter acesso a ambos. O que é ainda pior é que nenhum deles conseguiu consertar meu telefone (não é culpa dos arquivos) ctfu. Então eu decidi compartilhá-los eu mesmo. Até fiz uma cópia de cada partição usando qfil e um novo telefone com a rom global mais atualizada. https://mega.nz/file/Tj4XkKxS#TCckKSDZ3i9fvKSlVRRO9Fb6BQHAYmHxlaCcyGMqTaI
Click to expand...
Click to collapse
Por que você não conseguiu consertar seu celular? tenho medo de pagar e também não resolver
Mente Inquieta said:
Por que você não conseguiu consertar seu celular? tenho medo de pagar e também não resolver
Click to expand...
Click to collapse
you dont have to pay , i provided them for free lol. Idk what happened to the first phone but i bricked it and nothing was able to fix it.
tinman4209333 said:
you dont have to pay , i provided them for free lol. Idk what happened to the first phone but i bricked it and nothing was able to fix it.
Click to expand...
Click to collapse
I lost the baseband and the imei , I don't have the necessary programs to solve it , they are charging me 50USD

Question OTA update

I made the purchase of a Oneplus 10 Pro China Version with GLOBAL ROM on Aliexpress and I received it today, I called and did the first settings, and I went to do the OTA A.14 update and it is showing an error installing the update. Is this because it may still be unlocked when the global ROM installation process was done? to fix this would be to BLOCK THE BOOTLOADER?
I've already tried to update by oxygen update with the local update apk and it also failed to install, so the recommended thing would be to check the bootloader and if it's unlocked, block?
Use oxygen updater, use advanced mode and get the full update, not the incremental.
dladz said:
Use o atualizador de oxigênio, use o modo avançado e obtenha a atualização completa, não a incremental.
Click to expand...
Click to collapse
I did in this way and it also gave an error in the installation
dladz said:
Use oxygen updater, use advanced mode and get the full update, not the incremental.
Click to expand...
Click to collapse
I downloaded the full update and it also failed to install.
TrajanoX3 said:
I did in this way and it also gave an error in the installation
Click to expand...
Click to collapse
So you can download the update? Then you attempt to install with the local installer? And if fails? Are you downloading the correct firmware?
Remove any updates on your phone, they're in the root of your storages.
I've just checked oxygen updater and it's not listing It for me.
May need to obtain it from somewhere else.. it's should be 4.07GB iirc
dladz said:
Então você pode baixar a atualização? Então você tenta instalar com o instalador local? E se falhar? Você está baixando o firmware correto?
Remoção de todas as atualizações do seu telefone, elas estão na raiz dos seus armazenamentos
Click to expand...
Click to collapse
dladz said:
Então você pode baixar a atualização? Então você tenta instalar com o instalador local? E se falhar? Você está baixando o firmware correto?
Remova todas as atualizações do seu telefone, elas estão na raiz dos seus armazenamentos.
Click to expand...
Click to collapse
Baixei a versão IND, EU Full zip, versão completa, e com o atualizador local também não instalou
Translation:
I downloaded the IND version, EU Full zip, full version, and with the local updater it didn't install either
Click to expand...
Click to collapse
TrajanoX3 said:
Baixei a versão IND, EU Full zip, versão completa, e com o atualizador local também não instalou
Click to expand...
Click to collapse
Errrr sorry buddy no idea what that means
dladz said:
Errrr desculpe amigo não faço ideia do que isso significa
Click to expand...
Click to collapse
yes, i downloaded the correct update and also failed to install by local update
TrajanoX3 said:
sim, baixei a atualização correta e também não conseguiu instalar por atualização local
Click to expand...
Click to collapse
XDA is English only mate.
dladz said:
XDA is English only mate.
Click to expand...
Click to collapse
I made the correction in English, take a look at the answer
TrajanoX3 said:
yes, i downloaded the correct update and also failed to install by local update
Click to expand...
Click to collapse
That's quite odd.
How big was the update?
dladz said:
Isso é muito estranho.
Qual foi o tamanho da atualização?
Click to expand...
Click to collapse
4,18GB
TrajanoX3 said:
4,18GB
Click to expand...
Click to collapse
That is the full update.
No idea buddy. It should just work.
I don't have the answer to your problem but I will say don't ever lock the bootloader when there isn't an MSM Tool available. You risk a permanent brick!
I have exactly the same issue. I can't update my phone. It is so frustrating, I see it is not isolated problem but still no solution available.

Categories

Resources