Hi guys,
miGlobe ROM builder for our RedMi 7
PHP:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
When writing those lines, the available versions and options are:
Based on ROM Miui 10.3.2.0 (Android 9)
GPS optimization (by country / zone)
Optional Root
Optional remove of Xiami Apps:
MiUI BugReport
MiUI Browser
MiUI Weather
MiUI Email
MiUI LiveWallpaper
MiUI File-Explorer
Optional app:
MiXplorer App
Youtube Vanced
AdAway (root must be enabled to make it work)
Optional addons:
Wallpaper Pack (50 pictures)
Ringtone Pack (from other brands)
Block Xiaomi Sync Daemon (Telemetry stuff)
Clear Cache (on install, if you don't want to do it manually)
They may evolve over time
How to and others info availabe here : https://mi-globe.com/rom-builder-features/?id=36&codename=onclite&phone=RedMi+7
Reserved by OP
Very good
Tested but not working data/lte
H4nYcz said:
Tested but not working data/lte
Click to expand...
Click to collapse
Hmm... This is weird: As it's the global MIUI builder there's a LOT of people using it.
If data/LTE really didn't work as expected, multiple people would have reported it earlier.
I think your issue is an exception, did you try reflashing again?
With or without clear cache, etc...
H4nYcz said:
Tested but not working data/lte
Click to expand...
Click to collapse
Configure the access points according to the GSM operator's instructions
stormPremier said:
Hmm... This is weird: As it's the global MIUI builder there's a LOT of people using it.
If data/LTE really didn't work as expected, multiple people would have reported it earlier.
I think your issue is an exception, did you try reflashing again?
With or without clear cache, etc...
Click to expand...
Click to collapse
No, I didn't try reflashing again I'm using MiuiMix rom right now and it's working flawlessly even data/lte out of box without any configuration... If i get some free time I will try flash this again and report back, but thank you for the response
MalyMikrus said:
Configure the access points according to the GSM operator's instructions
Click to expand...
Click to collapse
Ok, so i re-flashed rom and configure APN, still data (3g/4g) don´t work for no reason, this happens only in this rom, so yes it is very strange issue
---------- Post added at 06:34 PM ---------- Previous post was at 06:22 PM ----------
I will try to flash latest (10.3.3.0.) version and report back if something change, it´s very weird because when i was sticked in MiuiMix rom then all works like a charm and in this ROM Builder (which is really exception) data/lte don´t work
Reflashed WITHOUT wiping caches and WITH wiping caches gives still same issue...
So people, after trying to flash the new version I gave up because it is clear that the error is in the very part of the ROM, because everywhere else my data and lte only work. On this one I have a weird problem, which I unfortunately can not explain, so I'm forced to go back previous stable ROM and here I publish logcat. Thank you for all the tips and advice and hope to see some stable custom rom soon for our beloved device.
Hi guys,
I just got this phone. I built and downloaded the rom but couldn't find a way to flash it in recovery.
I have a locked bootloader.
What should i do? Any pointers?
Thanks
halifage said:
Hi guys,
I just got this phone. I built and downloaded the rom but couldn't find a way to flash it in recovery.
I have a locked bootloader.
What should i do? Any pointers?
Thanks
Click to expand...
Click to collapse
You will need to unlock the bootloader and install twrp to flash this rom.
Sent from my [device_name] using XDA-Developers Legacy app
works on the Redmi 7 onclite-EEA or is just for the other models ??
How change location china to england i cant change where is problem
Related
CyanogenMod is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
{V}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project, a ROM for the Sony Xperia V
Contributors
FXP, kali
Version Information
Status: Testing
Created 2013-11-24
Last Updated 2013-11-24
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
FXP said:
HOWTO
Install instructions:
...
- fastboot flash boot boot.img (from cm10 zip)
...
Click to expand...
Click to collapse
I've downloaded cm11. Should I really use kernel from cm10 or it's a typo?
Followed the installation instructions but i get multiple system crashes. system, keyboard.... No homescreen and so on. Only thing i got working was the settings menu. Did i do something wrong or is there a fix for this? Went back to FXP246 10.2.....
cpumaster said:
Followed the installation instructions but i get multiple system crashes. system, keyboard.... No homescreen and so on. Only thing i got working was the settings menu. Did i do something wrong or is there a fix for this? Went back to FXP246 10.2.....
Click to expand...
Click to collapse
Did you flash gapps, if yes did you change some files?, if no flash them, if the problem still occurs try without gapps :good:
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
alfanumerica said:
I've downloaded cm11. Should I really use kernel from cm10 or it's a typo?
Click to expand...
Click to collapse
Yes it's a typo, because i don't think that a cm10 kernel would work on cm11
When flashing the zip the kernel should be installed too, if you want though you can flash the kernel from the cm11 zip manually via fastboot.
paxy97 said:
Did you flash gapps, if yes did you change some files?, if no flash them, if the problem still occurs try without gapps :good:
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
Click to expand...
Click to collapse
Yes i installed just as it was written in the post. So i installed 4.4 gapps and i did not try without it cos i need it... Could it be that the gapps i downloaded got corrupted?
Hi all,
can anyone share his experiences with the ROM? Especially whats not working until now or which "hard" bugs exist.
I want to use it, but at least it should be more or less stable (no reboots or something similar) and the "standard" things like Calls, Wlan and the system itself (Calendar, Contacts, Phone App and so on) should work. Things like a perfect camera or video play back are from a low priority for me.
Thanks and best regards
Imk82
Camera doesn't work
Sent from my LT25i using Tapatalk
imk82 said:
Hi all,
can anyone share his experiences with the ROM? Especially whats not working until now or which "hard" bugs exist.
I want to use it, but at least it should be more or less stable (no reboots or something similar) and the "standard" things like Calls, Wlan and the system itself (Calendar, Contacts, Phone App and so on) should work. Things like a perfect camera or video play back are from a low priority for me.
Thanks and best regards
Imk82
Click to expand...
Click to collapse
the answer is in the first post it's really difficult to read?
"Version Information
Status: Testing"
Testing means that is really unstable and not for daily use, testing status means that who want to help can try the rom and report bugs to developers.
cpumaster said:
Yes i installed just as it was written in the post. So i installed 4.4 gapps and i did not try without it cos i need it... Could it be that the gapps i downloaded got corrupted?
Click to expand...
Click to collapse
Where did you download gapps from?
Edit: try these maybe: http://d-h.st/mDt
paxy97 said:
Where did you download gapps from?
Edit: try these maybe: http://d-h.st/mDt
Click to expand...
Click to collapse
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
cpumaster said:
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
Click to expand...
Click to collapse
Strange AOKP doesn't seem to have that problem. Then only thing that crashes is Whatsapp.
paxy97 said:
Strange AOKP doesn't seem to have that problem. Then only thing that crashes is Whatsapp.
Click to expand...
Click to collapse
Actually championswimmer's version is much like AOSP. There is no AOKP options, so that's why there is no conflict.
cpumaster said:
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
Click to expand...
Click to collapse
try this :
http://forum.xda-developers.com/showthread.php?t=2397942
All 4.4 GApps packages and addons are compatible with both ART and Dalvik runtimes
Guys don't use ART. Some apps don't work with it
Sent from my Nexus 4 using Tapatalk
working great with art runtime !
(i didnt install gapps yet)
Anyone can send screenshots of cm11?
Gesendet von meinem LT25i mit Tapatalk Pro
androidseb said:
Anyone can send screenshots of cm11?
Gesendet von meinem LT25i mit Tapatalk Pro
Click to expand...
Click to collapse
It's still very very close to AOSP atm, so check out any Nexus 5 pics of KitKat, there's nothing really additional to it yet.
Hi. I have original firmware android 4.1.2 with unlock bootloader and root permission. I understand what i do to flash this version. Where i can found recovery?....this version is stable? What don't work fine in cm11? Thanks
Inviato dal mio GT-N8000 con Tapatalk 2
This is crDroid for Moto G 4G (Peregrine)
crDroid build will always mainly be based on CyanogenMod with some extra and few features (Cool and useful)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlocked and updated Bootloader
Code:
WORKING
- Everything as in CM
Bugs
- You tell me (With logcats :P)
Code:
CREDITS
CM Rom
Slim Rom
Omni Rom
Many More.....
Kernel
Device tree
XDA:DevDB Information
crDroid, ROM for the Moto G
Contributors
Vatsal
Source Code: https://github.com/crdroidandroid
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-01-31
Last Updated 2016-02-22
Enjoy to Our Site on Google Plus
Download
Help us with Translations
Donate to Maintain our build server
Demo Video
Download Gapps For Marshmallow
Tried to flash "crdroid-5.0.2-20150131-peregrine.zip" and got the error "Cant open <romname> (bad) Installation aborted"
PS: I think the file was downloaded correctly lol
Sn0wdune said:
Tried to flash "crdroid-5.0.2-20150131-peregrine.zip" and got the error "Cant open <romname> (bad) Installation aborted"
PS: I think the file was downloaded correctly lol
Click to expand...
Click to collapse
i just flashing right now,,and it´s booting ok! btw flashing into "philZ" recovery
:good:
"Don't restore Apps using Titanium Backup!"
Why is that?
mosta00 said:
i just flashing right now,,and it´s booting ok! btw flashing into "philZ" recovery
:good:
Click to expand...
Click to collapse
ohh i miss WI FI conection.. returning to cm
Stuck in boot loop.
Hi
(Moto G 4g, xt1039, europe)
running cwm
Hi I precisely followed the instructions and my device is stuck in a bootloop.
Anyone know how to fix this.
Thanks in advance.
Guys any real issues so far ?!
Boot loop?
one-option said:
Guys any real issues so far ?!
Click to expand...
Click to collapse
..
Thanks
Great ! Flashed for test , everything works fine. boooting normal here
---------- Post added at 03:51 PM ---------- Previous post was at 03:47 PM ----------
To acvoid bootloop you should :
> make a backup
> wipe cache + data + system
> flash crdroid lollipop
> flash gapps for lollipop (don't install kiktat gapps)
> wipe data and factory reset
edt 1: you must use latest twrp or phillz, idk if cwm works
edt 2 : no wi fi connection
---------- Post added at 04:01 PM ---------- Previous post was at 03:51 PM ----------
one-option said:
Guys any real issues so far ?!
Click to expand...
Click to collapse
No wi-fi connection
**** bootloop
ok guys i updated the OP a little bit.
there seems to be a wifi problem which i look into , are there any without wifi problem ?
No bootloop here, but no wifi. Otherwise, I didn't find any problem.
firebird11 said:
ok guys i updated the OP a little bit.
there seems to be a wifi problem which i look into , are there any without wifi problem ?
Click to expand...
Click to collapse
have you fixed it already or we must wait? thanks
Wifi Issues?
Hi, first let me thank you for your work bringing crDroid to pregegrine
Edit: Never mind, I found my answers and think my idea was not applicable.
Hey there,
Wow, very nice and smooth ROM you brought us here,
with a heck of customization and essential custom features already included, just flashed it to take a look, multitasking seems also not to bad in combination with BlueFlame4´s Minfree Fixer app, at least for my taste
Pink kernel works too, feels like a beast with it but, Wifi is simply frozen after first initial boot, it was click-able but after that the button is just "greyed out".
Thanks & Keep this up !
gr3ud said:
Wifi is simply frozen after first initial boot, it was click-able but after that the button is just "greyed out".
Click to expand...
Click to collapse
Does that mean that Wifi works after 2nd boot?
primewell said:
Does that mean that Wifi works after 2nd boot?
Click to expand...
Click to collapse
Unfortunately it does not.
new build
firebird11 said:
new build
Click to expand...
Click to collapse
Flashed your build. Can confirm that WiFi is fixed. Back button is not scaled when changing navbar dpi.
Removed
Looking forward to trying these out. Thanks for the time and effort.
Sent from my SM-N920P using Tapatalk
fsunoles101 said:
Looking forward to trying these out. Thanks for the time and effort.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Welcome
How will the ROM flash succeed on this device? It checks if the device is a meliusltexx or melius3gxx before flash and proceed only if it finds either. OTA updates will work after you flash this rom once because it will rename the device to meliusltexx.
Silesh.Nair said:
How will the ROM flash succeed on this device? It checks if the device is a meliusltexx or melius3gxx before flash and proceed only if it finds either. OTA updates will work after you flash this rom once because it will rename the device to meliusltexx.
Click to expand...
Click to collapse
The twrp recovery is modified and about the device changing to meliusltexx it always happens..
Check this similar thread
Marshmallow collection For tab 3 t217s/t
Invalid thread.
Sent from my LenovoA3300-GV using Tapatalk
Silesh.Nair said:
Invalid thread.
Sent from my LenovoA3300-GV using Tapatalk
Click to expand...
Click to collapse
Which is invalid thread .?
Nevermind. The link you gave me said invalid thread on tapatalk
http://forum.xda-developers.com/galaxy-tab-3/development-7/rom-marshmallow-t3320843
Try that @Silesh.Nair ..
This ROM is perfect besides the fact in YouTube I've lost the option to watch videos in 720p.. But damn, it feels like a nexus 7.. You relived my tab.. Thanks a million and keep up the great work..
---------- Post added at 09:36 AM ---------- Previous post was at 09:29 AM ----------
[email protected] said:
This ROM is perfect besides the fact in YouTube I've lost the option to watch videos in 720p.. But damn, it feels like a nexus 7.. You relived my tab.. Thanks a million and keep up the great work..
Click to expand...
Click to collapse
Sorry I replied to the wrong thread... Will delete soon
It's a very snappy ROM. Alot of the built in apps for mi are in a Foreign language though.
Even though I switch keyboards I still occasionally get a FC for the Android keyboard which is a little annoying.
Otherwise, nice job, keep up the good work.
Sent from my GT-I9205 using Tapatalk
mattbeau said:
It's a very snappy ROM. Alot of the built in apps for mi are in a Foreign language though.
Even though I switch keyboards I still occasionally get a FC for the Android keyboard which is a little annoying.
Otherwise, nice job, keep up the good work.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Go to settings And then Apps there is option where you can disable the android keyboard.. I did that no more FC..
Woops that was supposed to be posted in you mi rom. Thanks for the tip
Sent from my SM-G930V using Tapatalk
Thanks for the awosome roms and your support
majorkid said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Google These ROMS IF YOU WANT TO KNOW MORE ABOUT THEM.
*OTA UPGRADE SUPPORTED..
Download Links
ROM :Download ROMS
GAPPS:OPENGAPPS
RECOVERY:TWRP 3.0.2-1
KERNEL:CM13 Kernel
PATCHER:LT02LTEXX-PATCHER-3.0.ZIP
UPGRADES
Upgrades from previous versions of ROM's are the same process as install, except you do not need to wipe anything.
Except when you are upgrading from a diffrent ROM ..
INSTALLATION
-Flash The TWRP Recovery..
- FLASH the TWRP
- Download ROM and OPEN GAPPS 6.0 Arm PICO
- Download lt02ltexx-patcher-3.0.zip
- Download CM13 kernel above
- Boot into Recovery
- Make Backup
- Wipe / Factory Reset
- Flash
* ROM
* GAPPS
* LT02LTEXX-PATCHER-3.0.ZIP
* CM13 KERNEL
- Reboot System
Updates
When You Get OTA update
Download the Rom update
- Reboot into Twrp Recovery (no need to wipe and no need to flash gapps when upgrading)
- Flash
* ROM
* LT02LTEXX-PATCHER-3.0.ZIP
* CM13 KERNEL
- Reboot system
Thanks
1.RR TEAM
2.AOKP TEAM
3.TEMASEK
4.BROKENOS
5. @DarkFrenzy
6. @Silesh.Nair
7. @majorkid
8.OpenGapps
9.Any Person who contributed to the development..
*Please pay a visit to his page and give him thanks ..
BUGS
The bugs will be fixed by the developer himself..
The original dev page is :ROM FOR MEGA 6.3
About
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based on: CyanogenMod
Click to expand...
Click to collapse
For some reason when I flash any roms with versions of android over 4.4.4 they bootloop.
@vibraniumdroid Don't quote the OP..
Which device ? Which Rom ? Are you rooted ?
Thread closed per OP request.
STRATUM OS for HOT2
For which devices, should work
with all versions that are infinix hot 2
Click to expand...
Click to collapse
IMPORTANT
Code:
* Do NOT expect daily builds. I'll build when I'm free.
* Do NOT ask for support for flashing in this thread.
* Do NOT use this unofficial build and ask for support at the official threads.
What is working?
Code:
Service
Text Data
Call
Audio
WiFi
Google Now
GPS
MMS
Video playback
Audio playback
Internal/External
SDcard mounting
Themes All Layer features
Screen Record
Bluetooth
Wifi Shared
Video Recording
Youtube 720p
Sync Reboot fixed
Move Apps to SD
Xposed
What doesn't work -
You tell us !
Code:
1) Please flash Infinix Rom 1st before flashing this ROM (I tried changing the updater script to AndroidOne firmware partitions but didn't help)
2) Some apps may have difficulty accessing systemless root (like es file Explorer) I used root browser and it worked just fine.
3) xposed Framework zip sdk23 version 82 or less will work just fine, versions 83 or more will work fine too but it breaks the stock gallery app causing it to FC.
4) If you want to have Google now on tap flash gapps (I flashed open gapps mini 6.0, open gapps aroma won't even run)
5) Google plus FCs whenever you click on share or post a comment. I haven't figured out the cause yet (and it's not from xposed) tried even older apks and same out come. But you can view posts and even comment.
additional info BY @Bolumstar
Code:
Wipe data, cache, and dalvik cache
Code:
* Your warranty is now void.
Code:
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Download Link : HERE
Supersu v2.74 Link : HERE
Flashing Method
Flash ROM
Flash SuperSU
Flash Xposed (if you want)
Reboot !
Credits:
Android Open Source Project.
Obaid Muneer
Aditya Kumar
Anuta Lores
DroidPeepz™ Inc
Pharaohs Team
Dev.Muttahir Aon Syed
Dev.Frank Boateng
Dev.Coulibaly Nonta
Dev.Hasan Al-Hallaq
Dev.Hussein Medhat
Dev.Mazen Yasser
XDA:DevDB Information
[ROM][6.0.1][AOSP][PRO/Layer]STRATUM OS for HOT2, ROM for the Infinix HOT 2
Contributors
Ibrahim Fath El-bab, Mahmoud9873, iykeDROID
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Stable
Created 2016-07-05
Last Updated 2016-07-18
Good work done
...keep it up
@iykeDROID™
Great Work ! <3
iykeDROID™ said:
Good work done
...keep it up
@iykeDROID™
Click to expand...
Click to collapse
thanks bro
Mazen Yasser said:
Great Work ! <3
Click to expand...
Click to collapse
thanks Mazen
Hey I was wondering how you got the 3.18.XX kernel to boot on MT6580 chipset. I've been trying to get 6.0 for my MT6580 device (Cubot Note S) however the stock rom kernel is only 3.10 so I've only managed to get 5.1 custom roms to work.
Great Effort Guys and the best MM ROM for Hot 2.
I've been playing around it for about a week now and am so happy and satisfied with it's performance and battery life.
Here are additional info:
1) Please flash Infinix Rom 1st before flashing this ROM (I tried changing the updater script to AndroidOne firmware partitions but didn't help)
2) Some apps may have difficulty accessing systemless root (like es file Explorer) I used root browser and it worked just fine.
3) xposed Framework zip sdk23 version 82 or less will work just fine, versions 83 or more will work fine too but it breaks the stock gallery app causing it to FC.
4) If you want to have Google now on tap flash gapps (I flashed open gapps mini 6.0, open gapps aroma won't even run)
5) Google plus FCs whenever you click on share or post a comment. I haven't figured out the cause yet (and it's not from xposed) tried even older apks and same out come. But you can view posts and even comment.
So far, this is my daily driver now. Well built Rom.
Thanks to all involved in Porting this ROM.
i couldn't flash it, it gives me error 7 :/
ProRedFed said:
i couldn't flash it, it gives me error 7 :/
Click to expand...
Click to collapse
flash Infinix Rom before flashing
You know Infinix ROM require SP tools to flash right?
What do you mean my system less root?
Well built ROM, Great work!!! Minor concern; clicking system update in settings force closes it, any reason??
---------- Post added at 01:40 PM ---------- Previous post was at 01:31 PM ----------
essgen said:
You know Infinix ROM require SP tools to flash right?
What do you mean my system less root?
Click to expand...
Click to collapse
You can also simply use the Infinix Flash Tool!!
System less root is a modified root access strategy which doesn’t modify any files in the /system partition especially on devices running marshmallow, makes it easier to even install OTA Updates!!!
Please i want to flash this.......does it have the 3G only on 1 sim issue?
Marshe said:
Please i want to flash this.......does it have the 3G only on 1 sim issue?
Click to expand...
Click to collapse
No it doesn't
Great effort guys.. Does is support OTG?
Ibrahim Fath El-bab said:
flash Infinix Rom before flashing
Click to expand...
Click to collapse
yes, i've already done that but no success
Am unable to flash it using twrp. Am running stock infinix ROM 5.1. am getting a filesystem ext 4 dev block/mmc error. Am trying to upload a screenshot Buh my browser keeps bouncing the page. please help
I've successfully flashed it..... thanks. can't seem to get the layers manager themes working though
Marshe said:
I've successfully flashed it..... thanks. can't seem to get the layers manager themes working though
Click to expand...
Click to collapse
i get a filesystem ext 4 dev block/mmc error every time i try to flash it just like you, how u passed that error ?
Very very nice work, amazing ROM in fact, very fluid and fast(maybe the fastest for this device) but gutted it doesn't support otg. Then
-layers don't seem to work(installs but after reboot nothing changes, still looks stock).
-layers app also force closes when you try to uninstall layers. (Can still b uninstalled another way)
-after changing nav bar from initial config(switching recents from left to right) recent button don't work.
Still a cracking daily driver for people that don't mind not having otg. Didn't test the camera tho cos am not a camera person.
Again amazing ROM
Many thanks to the devs.
Anushan said:
Hey I was wondering how you got the 3.18.XX kernel to boot on MT6580 chipset. I've been trying to get 6.0 for my MT6580 device (Cubot Note S) however the stock rom kernel is only 3.10 so I've only managed to get 5.1 custom roms to work.
Click to expand...
Click to collapse
FYI
the stock 6.0 of android one rom is 3.18.xx kernel, so it can be ported out easily without any problems appearing
Developer : @vl_w
..soon official
Make sure to join>>>>Telegram Group : t.me/a300lineage_en
Github : https://github.com/vlw/android_device_samsung_a3lte
Supported Models:
* SM-A300F*
* SM-A300H*
* SM-A300M*
* SM-A300FU*
* SM-A300G*
* SM-A300Y*
* SM-A300YX*
Code:
* Your warranty is now void.
* The ROM is under developement and have some bugs.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. By flashing this ROM, you accept this disclaimer.
Working : Everything .
BUGS : Let dev know .
Code:
* Steps for a Clean Install:
1) Put the .zip file in Internal or External Storage.
2) Reboot in Recovery Mode (Using TWR Recovery)
3) Wipe Data, Cache, Dalvik Cache and format /System
4) Install the ROM.
5) Flash the Google Apps you like.
6) Reboot and Enjoy!
ROM Download link : https://drive.google.com/file/d/1ki6A2YDplnW-bh8vWUti29CPOO1H1nqi/view?usp=sharing
latest update : https://androidfilehost.com/?fid=15664248565197181446
Recovery download link : https://androidfilehost.com/?fid=8889791610682896177
New build — 20210407 (Lineage 17.1)
Download:
https://drive.google.com/file/d/1OHDyqsyHCgc_fySisZQ-DEZWnF4It297/view?usp=sharing
Please consider donate to dev :
ETH: 0x8aee65788e039a9ac79f22d7bda6bdaa270ad4a2
Bitcoin: 1KCMryHTHSUKiEHkvvkCFCiS5Yxy7Nzh6Q
Latest version : 2021/04/07
@Ud4ba Please check your PM inbox. Thank you.
There will be soon an update for this ROM with a lot of fixes .
New update released today . Come join in telegram .
link:https://drive.google.com/file/d/1flQ6Yy1tnS5GXKxQE6P9TTmRpo95oR8l/view?usp=sharing
The update(17.1-20210323) brings :
* RAM optimization
* GPU render driver fix
* Faster screen on (changed touch-drivers behavior)
* Use SamsungDoze (should save battery)
* Fix NFC and battery leak on A300H
* Early bootanimation
Bug report :
VPN implementation is still broken
Reproduction step:
Install NetGuard and enable it..
Result:
No internet.
Thank you !
drnightshadow said:
Bug report :
VPN implementation is still broken
Reproduction step:
Install NetGuard and enable it..
Result:
No internet.
Thank you !
Click to expand...
Click to collapse
if im not wrong i found your post on reddit , too . I dont think there is a bug on VPN . My VPN works perfectly fine . And i tried with more than 2 VPNs .
Ud4ba said:
if im not wrong i found your post on reddit , too . I dont think there is a bug on VPN . My VPN works perfectly fine . And i tried with more than 2 VPNs .
Click to expand...
Click to collapse
Well it's still a bug and try orbot too. Its fails...
please tell your 2 vpn names .. I'll try it...
Every VPN app I tried including adaway VPN(non root method), all fails.
Thank you!
drnightshadow said:
Well it's still a bug and try orbot too. Its fails...
please tell your 2 vpn names .. I'll try it...
Every VPN app I tried including adaway VPN(non root method), all fails.
Thank you!
Click to expand...
Click to collapse
I have tried with ProtonVPN and MullvadVPN .
Edit : If you want to block ads on Android 9+ , use your Private DNS and set it to "dns.adguard.com" .
You will block all ads , and you will use 0GB of RAM or CPU .
drnightshadow said:
Bug report :
VPN implementation is still broken
Reproduction step:
Install NetGuard and enable it..
Result:
No internet.
Thank you !
Click to expand...
Click to collapse
FYI:
don't forget to join us on telegram with the dev!
See the link at the top of this page
carlos974 said:
FYI:
don't forget to join us on telegram with the dev!
See the link at the top of this page
Click to expand...
Click to collapse
I don't use TG, I respect my privacy.
If you're on TG, than you can report this bug, please. I really like to use fully working NetGuad. I'm rooted, so I'm using adaway root method and I'm happy with it. I can control host sources. So ads isn't my problems. And I'm also using XPrivacyLua for extra privacy protection. So all I miss is NetGuard.
Soo PLEASE again report this bug on TG and I hope dev will fix it.
Ah, yes say thank you to him in my name for developing LOS ROM for this old device. He's the beesssttt!
Thank you all!
drnightshadow said:
Bug report :
VPN implementation is still broken
Reproduction step:
Install NetGuard and enable it..
Result:
No internet.
Thank you !
Click to expand...
Click to collapse
Logcat for the dev!
I found this thread and became so thrilled that I could revive my old a3,
but there is always but,
no matter what I do I can't get 'unlock bootloader' (entry in settings) to appear.
Is there any way around it or some forced way to unlock bootloader, I assume it is necessary to have it unlocked, right?
kjsu0 said:
I found this thread and became so thrilled that I could revive my old a3,
but there is always but,
no matter what I do I can't get 'unlock bootloader' (entry in settings) to appear.
Is there any way around it or some forced way to unlock bootloader, I assume it is necessary to have it unlocked, right?
Click to expand...
Click to collapse
I would recommend you to join our telegram .
kjsu0 said:
I found this thread and became so thrilled that I could revive my old a3,
but there is always but,
no matter what I do I can't get 'unlock bootloader' (entry in settings) to appear.
Is there any way around it or some forced way to unlock bootloader, I assume it is necessary to have it unlocked, right?
Click to expand...
Click to collapse
A3 from 2015 doesn't have locked bootloader lol, all you need is flashing twrp from odin and viola you can flash any rom or root.
Search on xda forum for more info, but you can start with this link
[How to] Root, TWRP, Flash A300FU / A300Y Noob friendly guide
Bevor you do something with your Device do a Backup of all your Data (Contacts, Pic´s ect.) outside of your Device (in a Cloud or on your PC) I'm not responsible for bricked devices, dead SD Cards, broken phone chargers etc.You do all at your own...
forum.xda-developers.com
Good luck!
That's something lol. I'm so accustomed to always go through some 'unlocking' procedures that I didn't even realize that this also is true.
I have few more questions:
1) asaik Knox warranty void change from 0x0 to 0x1 is normal but on bootup also appeared new message:
Set Warranty Bit : kernel
I assume that it is ok as well ?
2) is this rom set to permissive or enforcing ?
permissive
3) checking help dev box on rom installation is enough for devs or you need some more logs to figure things out?
kjsu0 said:
That's something lol. I'm so accustomed to always go through some 'unlocking' procedures that I didn't even realize that this also is true.
I have few more questions:
1) asaik Knox warranty void change from 0x0 to 0x1 is normal but on bootup also appeared new message:
Set Warranty Bit : kernel
I assume that it is ok as well ?
2) is this rom set to permissive or enforcing ?
permissive
3) checking help dev box on rom installation is enough for devs or you need some more logs to figure things out?
Click to expand...
Click to collapse
1. Yes, yes
2. Right
3. Yes, but you can read how to log cat from my previous link.
Sorry that's it, we're going too much off topic. Read and search xda furum like "A300FU".
Good luck and stay safe!
Excited about the idea to have 10 on a Samsung A3 (2015)!
Little questions:
* is everything working as of today (sound, GPS, etc.) or are there still bugs?
* out of curiosity, why isn't it listed here: https://download.lineageos.org/
?
ErnestErnest25 said:
Excited about the idea to have 10 on a Samsung A3 (2015)!
Little questions:
* is everything working as of today (sound, GPS, etc.) or are there still bugs?
* out of curiosity, why isn't it listed here: https://download.lineageos.org/
?
Click to expand...
Click to collapse
Read the the title..
pro tip : unofficial
> is everything working as of today
Click to expand...
Click to collapse
Everything works great but it might vary depending on model in use
> out of curiosity, why isn't it listed here:
Click to expand...
Click to collapse
It's unofficial but I read somewhere that it might become official for now it looks like releases are somewhat irregular eg. latest come with security patches from December 2020.
kjsu0 said:
Everything works great but it might vary depending on model in use
It's unofficial but I read somewhere that it might become official for now it looks like releases are somewhat irregular eg. latest come with security patches from December 2020.
Click to expand...
Click to collapse
source???? You read.. where? Fake news? There is no news about that on any official sites. Who are maintenances?