Hi folks,
Appreciate your help on this. I've recently change the chinesse rom on the k20 pro after unlocking the bootloader (i've done this several times in the past)
It was perfectly working, i was setting the miui up and put my google account when suddenly screen turned black with no response.
Tried pressing volume up and power keys for minutes, volume dorn and power keys... power and nothing. Still black.
THe thing is every time i do that, vibration sound and led work but no touchscreen response.
Additional information, i could not add my MI ACCOUNT and still can access the phone over fastboot (writing .\fastboot devices in the ADB FASTBOOT Powershell).
Would be depply thank you if you can support me!!
i think display is dead.did u find any solution?
Have you tried re-flashing stock Chinese rom over fastboot?
itbshould force reboot when you are pressing pwer button about 5-10s
if you feel startup vibration and if still not bring up screen then;
Preess volume down+power button untill you feed starup vibration
after that connect your device to pc and see if device recognized.
if recognied go to mi flash and select clean all.
browse and select fastboot rom. flash.
if it doesnt work then you should try edl method..
PiyasRahman said:
i think display is dead.did u find any solution?
Click to expand...
Click to collapse
no piyas, k20 pro doesnt have a chronic screen problem .
some people giving feedback that their display is dead without any issue.
PiyasRahman said:
some people giving feedback that their display is dead without any issue.
Click to expand...
Click to collapse
Some referring to how many?
i got feedback from 2 people. so ur phone is ok now?
PiyasRahman said:
i got feedback from 2 people. so ur phone is ok now?
Click to expand...
Click to collapse
Yes, it's ok so far.
have the same issue but mine has touchscreen working just black screen tried rebooting but still black screen even in booting its blackscreen and also in fastboot mode it still blackscreen also in recovery black screen please help me
kibria.mgk said:
Some referring to how many?
Click to expand...
Click to collapse
My k20 pro global is laying third month in service on warranty, dead touchscreen
Related
Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.
hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]
I've also same issue, please tell me if you get rid of this.
Volvo_be said:
Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.
Click to expand...
Click to collapse
PandaDex48 said:
hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]
Click to expand...
Click to collapse
Masood_alam said:
I've also same issue, please tell me if you get rid of this.
Click to expand...
Click to collapse
10. Once completed, disconnect the phone and power it up by long pressing power button.
Click to expand...
Click to collapse
I can't see/read, one of you did a long Power-Button pressing???
JamBax said:
I can't see/read, one of you did a long Power-Button pressing???
Click to expand...
Click to collapse
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?
sree94 said:
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?
Click to expand...
Click to collapse
Down load this older version of twrp-3.0.2-0-s2.img from https://dl.twrp.me/s2/
do a wipe->data format-> yes
then reboot.
Hi
I have same issue. Its looks like phone is turned on but my screen is black. I cant connect with adb cos i flashed fresh stock rom and with black screen i cant turn on debuging usb or unlock.(i can\t flash twrp so i cant flash new custom rom) Is there a way to flash custom rom with stock flasing tools like flashone or qfil, or is there a way to control my phone from computer without needing android screen(i can\t give any permission to new apps cos it new stock rom and my screen is black )
Solved - No Display after Flash
I know this is a old thread, but still i am posting this because u never know who might need it...
Guys i was having similar issue. After flashing Le2 with QFIL, I was getting no display. However my phone was somewhat on and making bleep sound when power key was pressed. Do this if you have similar problem:
1. Download this firmware:
https://drive.google.com/file/d/136X8jKA5eJRkyQ3Fi2f1r6qNkLXAG8io/view?usp=sharing
2. Flash it with QFIL/Miracle box/UMT whatever u feel like.
3. Hold Vol+ and Power button and goto Recovery. TWRP recovery will boot.
4. Now put any rom (i used latest LOS nightly) in it by using MTP from PC and flash it.
(Optional step: if u want to use official firmware It may happen that u get stuck at LeEco boot screen, only if u get stuck, then flash the kernel inside the zip and it will boot normally.)
5. ENJOY ^_^
If this helped, you know what u have to do :angel:
So I was trying to restore back to stock firmware with miflash, but for some reason it messed up and now wont boot at all.
Yes ive tried force rebooting it, plugging it in my pc, nothing will work. i say a notification led that blinks every like 30 seconds.
its just stuck at a black screen, i left it off the charger to drain the battery but im not sure if it still has battery or not.
Hvlios said:
So I was trying to restore back to stock firmware with miflash, but for some reason it messed up and now wont boot at all.
Yes ive tried force rebooting it, plugging it in my pc, nothing will work. i say a notification led that blinks every like 30 seconds.
its just stuck at a black screen, i left it off the charger to drain the battery but im not sure if it still has battery or not.
Click to expand...
Click to collapse
You've tried all hardware button press to boot in fastboot or twrp?
Laptapper said:
You've tried all hardware button press to boot in fastboot or twrp?
Click to expand...
Click to collapse
Yes it wont go into fastboot either.
So to be clear, holding down power button for 5 seconds does nothing at all? No vibration, no mi.com logo, nothing?
the_trev2 said:
So to be clear, holding down power button for 5 seconds does nothing at all? No vibration, no mi.com logo, nothing?
Click to expand...
Click to collapse
Correct I tried holding it for like 30-40 seconds and nothing. all i see is the led blinking and nothing else
OK, try this :-
-install JDK 8
-download and run https://github.com/Szaki/XiaomiADBFastbootTools
-select fastboot tab
-Hold down power button again, see if anything pops up in the left box
If it does, then you can download the latest global / eea rom and flash it from there. If nothing comes up, we'll see what else we can do
the_trev2 said:
OK, try this :-
-install JDK 8
-download and run https://github.com/Szaki/XiaomiADBFastbootTools
-select fastboot tab
-Hold down power button again, see if anything pops up in the left box
If it does, then you can download the latest global / eea rom and flash it from there. If nothing comes up, we'll see what else we can do
Click to expand...
Click to collapse
didnt work
any help??
Hvlios said:
any help??
Click to expand...
Click to collapse
experienced kind of the same thing but on mine i know it boots up cause i can hear the unlock and lock screen tones but no display. sent it to a service center and they replaced my motherboard and battery.
Robert56th said:
experienced kind of the same thing but on mine i know it boots up cause i can hear the unlock and lock screen tones but no display. sent it to a service center and they replaced my motherboard and battery.
Click to expand...
Click to collapse
from Xiaomi?
Hvlios said:
from Xiaomi?
Click to expand...
Click to collapse
Yeah
Robert56th said:
Yeah
Click to expand...
Click to collapse
They told me they cant replace it or do anything since its not sold in the US.
Hvlios said:
They told me they cant replace it or do anything since its not sold in the US.
Click to expand...
Click to collapse
Contact the one that sold you the phone and have them fix it.
Hi guys, my Mi A2 wont turn on anymore. I was downloading PubG mobile and then installed it and while it was being installed my phone was freezing. The screen then dimmed and then turned black. I then tried to reset it (holding power button and volume up/down, only holding power button... i tried almost every combination) without success. When i plug in the charger there is no vibration and no led indication. Back at home i tried to plug in the computer. I hear the sound of the pc which indicates that a usb device was connected but nothing more. When i hold the power button while plugged at the pc, after 12 or so seconds the sound of usb disconnection and shortly after of usb connection is coming. The phone was fully charged.
I use rootet pixel experience 10 with unlocked bootloader.
I dont know what to do now. Can someone help me? And apologies for my bad english.
Best regards
mangix
So i downloaded the MiFlash tool and tried to flash stock firmware but i got an error message. Does someone know what it means?
I think you should try to enter the phone in EDL (maybe with the test point method) and then try to flash the stock firmware as you did.
Does the phone notification LED turns on when you plug in the deviceto the PC?
elytron said:
Hi guys, my Mi A2 wont turn on anymore. I was downloading PubG mobile and then installed it and while it was being installed my phone was freezing. The screen then dimmed and then turned black. I then tried to reset it (holding power button and volume up/down, only holding power button... i tried almost every combination) without success. When i plug in the charger there is no vibration and no led indication. Back at home i tried to plug in the computer. I hear the sound of the pc which indicates that a usb device was connected but nothing more. When i hold the power button while plugged at the pc, after 12 or so seconds the sound of usb disconnection and shortly after of usb connection is coming. The phone was fully charged.
I use rootet pixel experience 10 with unlocked bootloader.
I dont know what to do now. Can someone help me? And apologies for my bad english.
Best regards
mangix
Click to expand...
Click to collapse
your phone entered edl mode ... probably due to update ota...do you have a jasmine to wayne conversion ...did you flash firmware package ?
anyway you cam flash a rom but probably the error in miflash is bevause you have ARB ..look for ARB4 rom and flash that to boot
if you didn't convert or have ARB4 or didn't update ota or something like that you probably have some broken hardware in phone and must replace some pieces and miflash gives errors because it cant fix hardware
KevMetal said:
your phone entered edl mode ... probably due to update ota...do you have a jasmine to wayne conversion ...did you flash firmware package ?
anyway you cam flash a rom but probably the error in miflash is bevause you have ARB ..look for ARB4 rom and flash that to boot
if you didn't convert or have ARB4 or didn't update ota or something like that you probably have some broken hardware in phone and must replace some pieces and miflash gives errors because it cant fix hardware
Click to expand...
Click to collapse
Thanks for ur answer. I tried all of that and nothing worked. So I think it's an hardware issue :/
elytron said:
Thanks for ur answer. I tried all of that and nothing worked. So I think it's an hardware issue :/
Click to expand...
Click to collapse
Ok sure man no problem
hi friends iam using mi max 2 from jan'2018 for the past 10 days the power and volume down buttons not working properly and the volume is reduced automatically. so i installed the beast os and it worked fine for one day. but from today morning the phone is going to fastboot mode only. it boots to orange fox recovery but when i give reboot it goes to fastboot mode only.
help me please
it is not because of the rom but how to solve this issue
please help me
thanks and regards
karthik4 said:
hi friends iam using mi max 2 from jan'2018 for the past 10 days the power and volume down buttons not working properly and the volume is reduced automatically. so i installed the beast os and it worked fine for one day. but from today morning the phone is going to fastboot mode only. it boots to orange fox recovery but when i give reboot it goes to fastboot mode only.
help me please
it is not because of the rom but how to solve this issue
please help me
thanks and regards
Click to expand...
Click to collapse
it happens with phone, when either one of button is pressed, not by us, its or we can say button stick in pressing mode from strip. in your case, its due to pressed button of volume down. so whenever you switch on it goes to fastboot.
Thanks for your kind reply bro.
How to solve the problem bro any ideas that I can do.
Thanks and regards
Updated regulary redmi note 9 to miui 13. Phone started freezing, restarting etc. So I wanted to downgrade to 12.5 miui and followed this:
. With renaming file, It reseted but there wasnt recovery mode to data wipe phone. Now It keeps showing only redmi logo for like 20sec then screen goes black and again to redmi logo. I waited for battery to be empty and the moment I plug-in it goes same routine. Power off button do nothing. Volume down+power nothing also. Any combination wont work. Usb cable in PC wont recognize it.
VD171 said:
Install usb drivers and then force flashing using spflashtool.
Click to expand...
Click to collapse
Im new to this and dont understand how to do this exactly or how it can help when PC wont "see" phone at all.
Need help before I reach a point of nerves breakdown. Ty in advance.