Can't flash vendor.img but i have TWRP [What to do ?] - Huawei P20 Pro Questions & Answers

Hi guys , i was running AOSIP PIE rooted and bootloader unlocked. I did an update of Magisk. And then i couldn't flash twrp it was not working , i could still boot phone normally and phone run smooth. Someone told me to flash TWRP with flashify and i did. Here the problems started , i started having error , can't boot anywhere etc...
I followed this tutorial https://forum.xda-developers.com/hua...g-to-t3932203/ for last solution .
But unfortunatly i can't flash VENDOR.img in fastboot , i can flash all except VENDOR.img it says
C:\ADB>fastboot flash vendor VENDOR.img
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460796 KB)...
OKAY [ 10.697s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 10.711s
I have flashed with success TWRP twrp-3.3.1-0-charlotte , i can get to it but there is no files inside the phone and it's not supporting SD cards to i don't have any ROM to flash ...
Do you guys have any idea about what to do ?
Thank you very much

I need help :'(

I had that.
Phone was completely dead, needed a new board.

chrissyyyw said:
I had that.
Phone was completely dead, needed a new board.
Click to expand...
Click to collapse
Are you sure of it ? did you buy it ?
You succefuly booted to twrp and tried to flash ROM ?
Because i used ADB command PUSH and managed to get ROM into /data/ folder in my phone , so i'm trying to flash them but it's not working at the end i reboot to fastboot
DId that happen to you too ?

benkiller47 said:
Are you sure of it ? did you buy it ?
You succefuly booted to twrp and tried to flash ROM ?
Because i used ADB command PUSH and managed to get ROM into /data/ folder in my phone , so i'm trying to flash them but it's not working at the end i reboot to fastboot
DId that happen to you too ?
Click to expand...
Click to collapse
I booted into fastboot, flashed the individual firmware files and it kept failing on the vendor.
I had a black screen with a red flashing LED on reboot. I claimed on my insurance and they replaced the board on the phone.
I checked on here and online for a resolution and it generally points to a hard brick.

benkiller47 said:
Hi guys , i was running AOSIP PIE rooted and bootloader unlocked. I did an update of Magisk. And then i couldn't flash twrp it was not working , i could still boot phone normally and phone run smooth. Someone told me to flash TWRP with flashify and i did. Here the problems started , i started having error , can't boot anywhere etc...
I followed this tutorial https://forum.xda-developers.com/hua...g-to-t3932203/ for last solution .
But unfortunatly i can't flash VENDOR.img in fastboot , i can flash all except VENDOR.img it says
C:\ADB>fastboot flash vendor VENDOR.img
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460796 KB)...
OKAY [ 10.697s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 10.711s
I have flashed with success TWRP twrp-3.3.1-0-charlotte , i can get to it but there is no files inside the phone and it's not supporting SD cards to i don't have any ROM to flash ...
Do you guys have any idea about what to do ?
Thank you very much
Click to expand...
Click to collapse
You must use OTG! Probably Flashify borked a partition,but i don't think it borked vendor.
However, you should still be able to flash a FullOTA with TWRP + NoCheck combo.
If you can't manage that, hit me on Telegram,i'm @Pretoriano80 in there!

You can flash EMUI based FW using an OTA method. It should work. But it will lock your bootloader and you will have to unlock it again.

benkiller47 said:
Hi
Click to expand...
Click to collapse
Are you flashing the same or later firmware??

Related

Help htc butterfly s , iam an expert in android but i failed :(

hii ...
i have HTC butterfly s phone is boot looping ,,,
issue :
when entering OS i can see the lock screen for 3 seconds then reboot.
solutions tried :
1- tried to wipe from TWRP recovery when it reaches /data >>> reboot.
2- tried to install another ROM without wiping >>>> reboot
3- tried to install CWM recovery , it says completed in fastboot (CMD) but recovery is not changing.
4- tried to lock the boot loader again , it says no such file or directory .
5- tried to boot in safemode but i see the lock screen for 3 seconds then reboot
iam stuck ... please help
thank you
hello
it happened to me the same, I just download it stock rom that is here, you have to see the version of your phone to know which is for yours.
greetings and good luck
all credits to the creator of the post
http://forum.xda-developers.com/showthread.php?t=2663295
GAVANA said:
hello
it happened to me the same, I just download it stock rom that is here, you have to see the version of your phone to know which is for yours.
greetings and good luck
all credits to the creator of the post
http://forum.xda-developers.com/showthread.php?t=2663295
Click to expand...
Click to collapse
hi .. thanks for reply ,,,
i downloaded stock rom 2.21 and tried to flash it from recovery when it tries to install the rom when it reaches to writing /data phone reboots
you mean something else ?
thanks ...
i want to add one thing ,,,
i have TWRP recovery 2.6.0.0 and i want to change it to CWM , i try to install from fastboot and it says successful but when i go into recovery its not changed !!!!!!
recovery recovery.img
sending 'recovery' (12364 KB)... OKAY [ 1.794s]
writing 'recovery'... OKAY [ 0.983s]
finished. total time: 2.777s
hwoarang626 said:
i want to add one thing ,,,
hello
at first I was the same with the recovery, but install this and it worked well, and use that version of android stock for now
but if you want to upgrade later (OTAS), you would have to have stock recovery and unroot your device, saludos
http://forum.xda-developers.com/showthread.php?t=2730482 .
i have TWRP recovery 2.6.0.0 and i want to change it to CWM , i try to install from fastboot and it says successful but when i go into recovery its not changed !!!!!!
recovery recovery.img
sending 'recovery' (12364 KB)... OKAY [ 1.794s]
writing 'recovery'... OKAY [ 0.983s]
finished. total time: 2.777s
Click to expand...
Click to collapse
hello
at first I was the same with the recovery, but install this and it worked well, and use that version of android stock for now
but if you want to upgrade later (OTAS), you would have to have stock recovery and unroot your device
regards
http://forum.xda-developers.com/showthread.php?t=2730482
its the same ,,, i tried to install the recovery you gave me but it did not install the recovery , Iam still stuck with a recovery that is not doing anything .
thanks
one more point ,,, i noticed that my /system is empty ...
hwoarang626 said:
one more point ,,, i noticed that my /system is empty ...
Click to expand...
Click to collapse
Since no one else is really helping you I will.
So what I gathered is your Rom bootloops and you've tried installing stock Rom but still no luck so you want to switch recoveries but you can't get twrp to flash...?
1. Are you S-Off or S-On? If you are s-on you must flash boot.img with this command
Code:
fastboot flash boot boot.img
2. To flash a recovery made for your device you must place it in fastboot and enter this
Code:
fastboot flash recovery recovery.img
3. Place Rom on internel storage if you choose cwm because it doesn't support external sdcard like twrp. For latest twrp, message @kairi_zeroblade... If you can't place on internal with cwm then you must do a sideload with the Rom same goes for twrp.
Want to support InsertCoin? Just get our donate key
xXminiWHOOPERxX said:
Since no one else is really helping you I will.
So what I gathered is your Rom bootloops and you've tried installing stock Rom but still no luck so you want to switch recoveries but you can't get twrp to flash...?
1. Are you S-Off or S-On? If you are s-on you must flash boot.img with this command
Code:
fastboot flash boot boot.img
2. To flash a recovery made for your device you must place it in fastboot and enter this
Code:
fastboot flash recovery recovery.img
3. Place Rom on internel storage if you choose cwm because it doesn't support external sdcard like twrp. For latest twrp, message @kairi_zeroblade... If you can't place on internal with cwm then you must do a sideload with the Rom same goes for twrp.
Want to support InsertCoin? Just get our donate key
Click to expand...
Click to collapse
thank you for your help ,,,
im S-ON
fastboot flash boot boot
.img
< waiting for device >
sending 'boot' (6104 KB)...
OKAY [ 0.830s]
writing 'boot'...
OKAY [ 0.590s]
finished. total time: 1.420s.
fastboot flash recovery
cwm6.0.4.5.img
sending 'recovery' (12364 KB)...
OKAY [ 1.430s]
writing 'recovery'...
OKAY [ 0.990s]
finished. total time: 2.420s
i did what you said but nothing changed im still on TWRP recovery 2.6.0.0 and my room is boot looping
hwoarang626 said:
thank you for your help ,,,
im S-ON
fastboot flash boot boot
.img
< waiting for device >
sending 'boot' (6104 KB)...
OKAY [ 0.830s]
writing 'boot'...
OKAY [ 0.590s]
finished. total time: 1.420s.
fastboot flash recovery
cwm6.0.4.5.img
sending 'recovery' (12364 KB)...
OKAY [ 1.430s]
writing 'recovery'...
OKAY [ 0.990s]
finished. total time: 2.420s
i did what you said but nothing changed im still on TWRP recovery 2.6.0.0 and my room is boot looping
Click to expand...
Click to collapse
Not sure if you can enter this command without a-off but try
Code:
fastboot erase cache
Then repeat the previous post....
If that doesn't work I'd try firewaters universal s-off tool and obtain s-off and try that command or see if it fixes your issues with your device. if that fails your best bet would be to ruu.. if you can't do that either you got a useless device till s-off exploit Is found if that's the reason why it's messing up.... Or donate it to someone who could fix it (me)
Want to support InsertCoin? Just get our donate key
xXminiWHOOPERxX said:
Not sure if you can enter this command without a-off but try
Code:
fastboot erase cache
Then repeat the previous post....
If that doesn't work I'd try firewaters universal s-off tool and obtain s-off and try that command or see if it fixes your issues with your device. if that fails your best bet would be to ruu.. if you can't do that either you got a useless device till s-off exploit Is found if that's the reason why it's messing up.... Or donate it to someone who could fix it (me)
Want to support InsertCoin? Just get our donate key
Click to expand...
Click to collapse
i tried this and no luck ,,,
actually i tried every thing but the problem is that the data does not change in the phone ,, i even formated (real format fsck) to /data and it was showing its empty but after reboot everything went back ,,, iam fixing android phones since htc desire but never faced anything like this ,,,
thank you for your help ,, and what you mean by donate and get it fixed ?
hwoarang626 said:
i tried this and no luck ,,,
actually i tried every thing but the problem is that the data does not change in the phone ,, i even formated (real format fsck) to /data and it was showing its empty but after reboot everything went back ,,, iam fixing android phones since htc desire but never faced anything like this ,,,
thank you for your help ,, and what you mean by donate and get it fixed ?
Click to expand...
Click to collapse
Seem like you fried your "/data" partition from what you just mentioned above. The only way I could see you fix is ruu. Cause HTC won't fix it if you send it in with a custom recovery at which you can't change.
And what I meant is since the device is rendered completely useless, unless you can get a run to ruu. You'd donate it to me this way i could try and fix it...
Sent from my HTC0P4E1 using Tapatalk
xXminiWHOOPERxX said:
Seem like you fried your "/data" partition from what you just mentioned above. The only way I could see you fix is ruu. Cause HTC won't fix it if you send it in with a custom recovery at which you can't change.
And what I meant is since the device is rendered completely useless, unless you can get a run to ruu. You'd donate it to me this way i could try and fix it...
Sent from my HTC0P4E1 using Tapatalk
Click to expand...
Click to collapse
i think im facing the same problem here, do u know where we can find the RUU, I searched the whole internet and i could not find, im ready to donate if u fix my problem and provide me with the RUU.
Regards
mr_wehbe said:
i think im facing the same problem here, do u know where we can find the RUU, I searched the whole internet and i could not find, im ready to donate if u fix my problem and provide me with the RUU.
Regards
Click to expand...
Click to collapse
There is no RUU for this phone, as far as I know. The closest thing to RUU is flashing everything by hand, but this seems to have failed in this case, unfortunately.

le 2 x620 unable to start

i updated x620 recently with 5.9.20s , i was not getting volte so i tried to downgrade it by installing twrp, but now phone is showing your mobile is not running original le firmware so it cant start and then it goes shutdown , i can enter into fastboot mode , i tried different firmwares already , but m getting error of
C:\Program Files (x86)\Minimal ADB and Fastboot>Fastboot flash recovery recovery.img
target reported max download size of 134217728 bytes
sending 'recovery' (21706 KB)...
OKAY [ 0.928s]
writing 'recovery'...
(bootloader) Fastboot oem devices is unlock
FAILED (remote: size too large)
finished. total time: 0.947s
please tell me wat sud i do now
Try a different ADB and fastboot. It seems rather odd that it would state that recovery is too large unless the recovery partition got corrupted or something.
Fixed it , i was using latest twrp in old rom
But stucked in new problem , i want to have volte support , through twrp i can only install custom roms , is there a way to flash stock rom ?
Method to flash it by putting update.zip in root directory is giving error as signature failed in stock recovery , and in twrp stock rom cnt be flashed
Amit2310 said:
Fixed it , i was using latest twrp in old rom
But stucked in new problem , i want to have volte support , through twrp i can only install custom roms , is there a way to flash stock rom ?
Method to flash it by putting update.zip in root directory is giving error as signature failed in stock recovery , and in twrp stock rom cnt be flashed
Click to expand...
Click to collapse
Try with chinese Twrp
solved ,, the rom i downloaded was corrupt

Recovey change that goes worng

Hi all,
I'm trying to understand what did I do wrong.
I bought my device with an unlocked bootloader miui V8 (global rom).
I tried to flash TWRP recovey and MIUI PRO rom. I follow the steps that are mentioned here
and got soft brick - the device got stuck on the mi logo (with the unlock sign), even when I wait in patience the device just turned off.
- At the beginning I flashed the TWRP recovery by xuefer, boot into it and flashed the dm-verity disabler (as mentioned in the guide) and got error 1.
I reboot the device and it didn't boot.
- I boot to the recovery again and wipe the data - didn't boot.
Boot to recovery again and wipe to factory
-I flashed the MIUI PRO rom and the device still didn't boot.
I tired to flash the TWRP recovery by iscle - now the dm-verity disabler succeed but the device still didn't boot.
made the wiping steps as above again - and the device still got stuck at the mi logo.
At any step I manged to boot into the TWRP recovery and fastboot mode.
My lest option was to go back to the global stock rom using MiFlash
Now I'm on Global MIUI 9 with locked bootloadr
What did I do wrong?
I want to unlock the bootloader and to get back my control on my device.
Please advice
Thanks
Download the latest TWRP on this forum. Flash it. After, go to twrp, wipe data, cache, flash MIUI PRO rom, and after flash also flash the latest SuperSU zip. Then try again and see if it's gonna boot up.
how sure were you that the device had an unlocked bootloader when you purchased it? if it was brand new, certainly its bootloader is locked.
Do you have an open padlock when your phone is booting ?
Remember to boot to twrp just after flashing and before booting to the rom.
Thank you all for your answers!
Thank you all for your answers!
ekin_strops said:
Download the latest TWRP on this forum. Flash it. After, go to twrp, wipe data, cache, flash MIUI PRO rom, and after flash also flash the latest SuperSU zip. Then try again and see if it's gonna boot up.
Click to expand...
Click to collapse
This is exectly what I've done. and I't didn't worked.
Can you please point me to exact TWRP that you meant?
What about the dm-verity disabler ? it isn't necessary?
ondoy1943 said:
how sure were you that the device had an unlocked bootloader when you purchased it? if it was brand new, certainly its bootloader is locked.
Click to expand...
Click to collapse
I've checked the bootloader status in the Dev menu and with fastboot (fastboot oem device-info).
In addtion to all I had the open padlock sign when the turned on the device.
lightman33 said:
Do you have an open padlock when your phone is booting ?
Remember to boot to twrp just after flashing and before booting to the rom.
Click to expand...
Click to collapse
I had the open padlock sign.
Now unfortunately I flashed with MiFlash the global rom and my bootloader is locked.
I want to know the mistake I've done - so I don't fail with it again after I'll get the approval to open my bootloader.
Thanks
no mistake, they are three batches files in the rom zip. One of them is relocking the bootloader.
Flash_all with without erase data
Flash_all with wipe data
Flash_all with relock bootloader
I don't know miflash interface but you unfortunately choose the third choice. You need now to unlock your bootloader again (maybe by creating a new xiaomi account, not sure of this).
lightman33 said:
no mistake, they are three batches files in the rom zip. One of them is relocking the bootloader.
Flash_all with without erase data
Flash_all with wipe data
Flash_all with relock bootloader
I don't know miflash interface but you unfortunately choose the third choice. You need now to unlock your bootloader again (maybe by creating a new xiaomi account, not sure of this).
Click to expand...
Click to collapse
I'm sorry if you miss understood me, but I meant to the mistake I've made with the TWERP and rom flashing.
I can't figured out what I've did wrong.
Sorry if was not clear but the problem could be here :
Now unfortunately I flashed with MiFlash the global rom and my bootloader is locked.
II think you choose in Mi Flash tool an option to flash with re-lock the bootloader (don"t know how it's designed in the app because I flashed my phone manually, using one of the 3 batch files).
Hope it will help you.
lightman33 said:
Sorry if was not clear but the problem could be here :
Now unfortunately I flashed with MiFlash the global rom and my bootloader is locked.
II think you choose in Mi Flash tool an option to flash with re-lock the bootloader (don"t know how it's designed in the app because I flashed my phone manually, using one of the 3 batch files).
Hope it will help you.
Click to expand...
Click to collapse
Thank you for your answer.
I will open my bootloader,
I'm just trying to understand which TWRP version to flash for the miui pro rom (or any other)
And what is the process (or "the correct steps") to :
* Flash the TWRP recovery
* And to flash any other different rom from the miui stock.
Thanks
I took the TWRP from this forum, this is my md5 if you want to check yours :
f52ff052971b67df097d4cfa8a2ec162 twrp-3.2.0-0-oxygen.img
And this is my howto :
$ sudo fastboot flash recovery twrp-3.2.0-0-oxygen.img
target reported max download size of 536870912 bytes
sending 'recovery' (16196 KB)...
OKAY [ 0.504s]
writing 'recovery'...
OKAY [ 0.095s]
finished. total time: 0.600s
$ sudo fastboot boot twrp-3.2.0-0-oxygen.img
downloading 'boot.img'...
OKAY [ 0.487s]
booting...
OKAY [ 0.576s]
finished. total time: 1.063s
For the ROM, I took file here : http://bigota.d.miui.com/7.12.8/oxy....8_20171208.0000.00_7.1_global_93a8045184.tgz
Filename : oxygen_global_images_7.12.8_20171208.0000.00_7.1_global_93a8045184
From forum : http://en.miui.com/thread-1273027-1-1.html
and the command to flash was (after unzip the file) :
$ sudo ./flash_all_except_storage.sh
Beginning of the log :
product: oxygen
erasing 'boot'...
OKAY [ 0.027s]
finished. total time: 0.027s
erasing 'sec'...
OKAY [ 0.021s]
finished. total time: 0.021s
target reported max download size of 536870912 bytes
sending 'crclist' (0 KB)...
OKAY [ 0.040s]
writing 'crclist'...
OKAY [ 0.020s]
finished. total time: 0.060s
target reported max download size of 536870912 bytes
sending 'sparsecrclist' (0 KB)...
OKAY [ 0.040s]
writing 'sparsecrclist'...
Hope it will help you...
ymca said:
Thank you for your answer.
I will open my bootloader,
I'm just trying to understand which TWRP version to flash for the miui pro rom (or any other)
And what is the process (or "the correct steps") to :
* Flash the TWRP recovery
* And to flash any other different rom from the miui stock.
Thanks
Click to expand...
Click to collapse
Hi! As others have already told you,
What I would do is to completely format the phone with Mi Flash (download the latest global stable fastboot version from http://en.miui.com/a-234.html), then flash it to the phone using the Flash All option, then flash my recovery or the one from xuefer (the one you prefer, both work), if you are flashing miui pro I think there is no need to flash the dm-verity file, so just wipe system + data + cache and flash miuipro.zip
Thank you all for your replais !
I will try and update right after I'll get the bootloader unlock approval.
Meanwhile you all have a great day !

Request OEM unlock Huawei P10

Hi all,
I have an incorrect firmware installed for my P10 and lots of things are not working (oreo 8.0). I want to re-flash or rollback to other firmwares but problem is I can't get into TWRP anymore. flashing it doesn't work and although I see in fastboot Phone Unlocked and FRP unlock i have the idea it has to do with the OEM unlock not working properly. It's also not available in the developer options. What;s exactly the link to huawei's page where you can request your phone unlock ID ?
Thanks
Whats not working ?
What is it saying when flashing something through fastboot ?
virusdunil said:
Whats not working ?
What is it saying when flashing something through fastboot ?
Click to expand...
Click to collapse
When I go into the bootloader and want to flash TWRP I get following message:
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (16494 KB)...
OKAY [ 0.552s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.566s
What is the ADB command youre using ?
virusdunil said:
What is the ADB command youre using ?
Click to expand...
Click to collapse
fastboot flash recovery_ramdisk twrporeo.img
and my twrp oreo name is twrporeo.img
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
virusdunil said:
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
Click to expand...
Click to collapse
Same problem...:
C:\Android>fastboot flash ramdisk twrporeo.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (16494 KB)...
OKAY [ 0.532s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.546s
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
virusdunil said:
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
Click to expand...
Click to collapse
I already tried that but no success. Did a factory reset and now the bootloader is locked again. How can I unlock the bootloader again?
Thanks
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
virusdunil said:
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
Click to expand...
Click to collapse
First of all, I've tried to update from Nougat to Orea via Blackballs method in this thread https://forum.xda-developers.com/p10-plus/development/oreo-update-thread-l29c432-t3729907 with the firmware mentioned there
What is not working:
I've managed to do the first part (oreo install), but:
- SImcard has 'No service
- Can't flash TWRP
- Bootloader / phone locked in Fastboot
- I can't remember how I unlocked the P10 last year (I have a P10 L09-VTR, rebranded to L29-VTR and now 'working' on a VKY P10 plus rom)

Bricked P9

Hi there! So, I unlocked my bootloader yesterday and I've been trying to install a custom rom, no luck at all, it doesn't boot. It just stays in a bootloop. I think that's because I wiped the system and data instead of just wiping data then performing a factory reset, how it told me in the installation guide. Now, I have a european EVA-L09 with a unlocked bootloader and TWRP installed. What can i do to get it boot up? Thanks in advance
Try with HWOTA by installing the same stock ROM you had before messing up
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Btw, Huawei portal for Bootloader codes was down for days - was it up now again or you paid for DC Unlocker
If u can boot device to fastboot, you can flash boot.img, recovery.img system.img and cust.img trough command prompt to boot up phone. Previously extract those 4 files from update.app with Huawei Update Extractor.
zgfg said:
Try with HWOTA by installing the same stock ROM you had before messing up
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Btw, Huawei portal for Bootloader codes was down for days - was it up now again or you paid for DC Unlocker
Click to expand...
Click to collapse
I paid for DC Unlocker. I'll try it out. Ummm, I bought mine from UK, what version should I get? I had the latest EMUI 5.0.1 (Naugat 7.0) Stock ROM. It was my mistake that I didn't backed it up, had no storage left on my SD Card... Stupid me
fler_tb said:
If u can boot device to fastboot, you can flash boot.img, recovery.img system.img and cust.img trough command prompt to boot up phone. Previously extract those 4 files from update.app with Huawei Update Extractor.
Click to expand...
Click to collapse
Hi there! I'll try it out!
fler_tb said:
If u can boot device to fastboot, you can flash boot.img, recovery.img system.img and cust.img trough command prompt to boot up phone. Previously extract those 4 files from update.app with Huawei Update Extractor.
Click to expand...
Click to collapse
Code:
C:\Users\Whiskey\Desktop>fastboot flash system SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'system' (449861 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 20.379s
well, this is what happens...
BlazedMC said:
Code:
C:\Users\Whiskey\Desktop>fastboot flash system SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'system' (449861 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 20.379s
well, this is what happens...
Click to expand...
Click to collapse
Sorry for late answer. Maybe your bootloader is locked so you can't direct flash it trough fastboot...?!
fler_tb said:
Sorry for late answer. Maybe your bootloader is locked so you can't direct flash it trough fastboot...?!
Click to expand...
Click to collapse
I solved it a long time ago, the same day. Thanks anyway!
BlazedMC said:
I solved it a long time ago, the same day. Thanks anyway!
Click to expand...
Click to collapse
How did you??

Categories

Resources