Database Develop

[BETA][DUK] TWRP 3.1.1-1 [+ROOT]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Honor 8 Pro (DUK)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x.
Intended for usage on stock emui 5.x in combination with unlocked bootloader .
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-duk.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official PHH Superuser Beta 310[/U][/B]
1. download and flash [URL="http://superuser.phh.me/superuser-r310-beta.zip"]official PHH Superuser Beta 310[/URL]
2. install "Phh Superuser" from Google Play
3. Enjoy!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_honor_duk/releases/download/3.1.1-1/twrp-3.1.1-1-duk.img"][U]download twrp-3.1.1-1-duk.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 25. June 2017
Q: which H8 Pro models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
A: Yes you can! (Check FAQ)
Q: Can i install Magisk?
A: No (encrypted /data), Yes (decrypted /data)
Q: Does official SuperSU work?
A: No (encrypted /data), Yes (decrypted /data)
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with fileencryption disabled in fstab
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Honor 8 Pro
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_honor_duk
Version Information
Status: Beta
Created 2017-06-23
Last Updated 2017-06-25

Reserved
Changelog
Code:
[B]TWRP 3.1.1-1[/B]
* fix twrp on emmc based devices

Man that was fast. Will definitely flash this after I get my H8 Pro.
Sent from my Honor 8 using XDA Labs

Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate

blattes86 said:
Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate
Click to expand...
Click to collapse
this should work for every h8 pro utilizing emmc storage:
https://drive.google.com/open?id=0BxWP2gF_0Bd_OHBPWDctZmJCanc
It has been tested.
Regards

Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?

OldDroid said:
this should work for every h8 pro utilizing emmc storage:
It has been tested.
Regards
Click to expand...
Click to collapse
I flashed it, it works fine.
Thanks

adriansticoid said:
Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?
Click to expand...
Click to collapse
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.

-=MoRpH=- said:
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.
Click to expand...
Click to collapse
That's great news. Thanks for confirming. :highfive:
Sent from my Honor 8 using XDA Labs

I flashed emmc version and supersu. For going in twrp I've to clic in the middle of the volume button and the power on.

Interesting, i tried to install it but i'm stuck with installion...i know how to enter fastboot mode with phone plugged to my computer with android sdk on, but the adb files look to be missing when i check with cmd...
Can anyone here give a quick tutorial ? Thanks

New Version (3.1.1-1) available - You can find more infos in OP.
This release fixes partition mounting on emmc 5.1 based devices
Source code is now also up and can be built!
https://github.com/OpenKirin/android_device_honor_duk
Regards

Wow that was faster than I could learn to do it.
Great job. May I ask how you got the important informations to build this?
Did you inject su into the image to gain root and then read all the detailed data through terminal or adb or root file explorer?
Just asking cause i train my brain more and more in my spare time and want to get behind the knowledge base to learn. :good:

First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do I need to choose?
Cheers

Would this work on the Chinese V9 variant?

smouker said:
First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do IP need to choose?
Cheers
Click to expand...
Click to collapse
Format the whole internal storage to remove encryption.

adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
can I restore Data via TWRP without problems?

adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt

smouker said:
can I restore Data via TWRP without problems?
Click to expand...
Click to collapse
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
blattes86 said:
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt
Click to expand...
Click to collapse
What do you mean to restart the partition is new encrypt?

adriansticoid said:
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
What do you mean to restart the partition is new encrypt?
Click to expand...
Click to collapse
sorry for my bad english.
After restart the phone...

Development [RECOVERY] [11] [ALPHA] TeamWin Recovery Project (ebba) (2021-09-09)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance - http://gerrit.twrp.me
If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Hello, this is TWRP, for Oneplus Nord CE 5G
Installation:
# To temporarily boot it
fastboot boot <twrp_file_name>.img
# Since Nord CE 5G has a separate recovery partition, you can flash the recovery with
fastboot flash recovery <twrp_file_name>.img
Thanks to theincognito for his oneplus 8T twrp tree
# Dowloads
gdrive

#reserved

Working:
Boots
mtp
internal storage
decryption
Not working:
adb sideload
oxygenos flashing

Many thanks to your work! Can you tell me please, if nandroid backup is working?
Thanks in advance!

Sony make.belive said:
Many thanks to your work! Can you tell me please, if nandroid backup is working?
Thanks in advance!
Click to expand...
Click to collapse
my device is bricked so i cant test them as system product vendor partitions are not available i need to get this device unbricked. But in general it should work

I can confirm that it starts in the recovery
If you need more proof or more information ...

sanangel said:
I can confirm that it starts in the recovery
View attachment 5405461
If you need more proof or more inforamation ...
Click to expand...
Click to collapse
did all partitons mounted correctly?
can you share log screen

Venkat.Yadlapati said:
did all partitons mounted correctly?
can you share log screen
Click to expand...
Click to collapse
Are you referring to the dmesg.log file?

sanangel said:
Are you referring to the dmesg.log file?
Click to expand...
Click to collapse
no the button beside home

Venkat.Yadlapati said:
no the button beside home
Click to expand...
Click to collapse
pm answered

Thank you for the awesome work.
I hope this makes us at least an inch closer to custom roms

I was able to install it, but the functions are limited, such as not recognizing USB and not being able to mount the system.
I'm looking forward to it in the future.
ROM:Oxygen OS 11.0.1.1.EB13AA

And when you change slot used at the reboot section?

I tried to flash an update through it and got a brick. It took a long time to recover.
We are waiting for the update.

There is one available 11.0.9.9, but not installing with unlocked bootloader

Mamay72 said:
I tried to flash an update through it and got a brick. It took a long time to recover.
We are waiting for the update.
Click to expand...
Click to collapse
How did you successfully recover from the brick?

JamboFE said:
How did you successfully recover from the brick?
Click to expand...
Click to collapse
[OPNORDCE][OOS EB13BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com

JamboFE said:
How did you successfully recover from the brick?
Click to expand...
Click to collapse
By issuing repair request with oneplus.

!PdK said:
By issuing repair request with oneplus.
Click to expand...
Click to collapse
Hi does anyone have the .img file for this so i can reflash the recovery. Ive got a bricked NORD CE 5G which does still have a working recovery - if i could get TWRP on there then i "should" be able to flash a stock zip file from TWRP....thanks.

ComfySofa said:
Hi does anyone have the .img file for this so i can reflash the recovery. Ive got a bricked NORD CE 5G which does still have a working recovery - if i could get TWRP on there then i "should" be able to flash a stock zip file from TWRP....thanks.
Click to expand...
Click to collapse
For ebba I have

Development [RECOVERY] [11] [star/mars] [OFFICIAL] TeamWin Recovery Project

Introduction:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance - http://gerrit.twrp.me
If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Hello, this is TWRP, for Mi 11 Pro/Ultra
USB OTG will not work
Decrypting Android 12 will only work if you remove pin/password
Installation:
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now
Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
4. select the new image
5. after that is done, if you were using a custom kernel, reflash it now
6. if you were using magisk, reflash it now
thanks to : @erfanoabdi @Cozzmy13
Send me a beer: Crypto (Preferred) | PayPal
Trees:
https://github.com/TeamWin/android_device_xiaomi_star
https://github.com/TeamWin/android_device_xiaomi_mars
https://github.com/TeamWin/android_device_xiaomi_sm8350-common
Telegram group: https://t.me/NSSFB
Download:
star: https://twrp.me/xiaomi/xiaomimi11ultra.html
mars: https://twrp.me/xiaomi/xiaomimi11pro.html

Wow
Finally, official TWRP for our device, thanks alot to dev

when i flash it ,i can`t mount my /data
my device is mi 11 star

347111268 said:
when i flash it ,i can`t mount my /data
my device is mi 11 star
Click to expand...
Click to collapse
Are you on android 12?

Nebrassy said:
Are you on android 12?
Click to expand...
Click to collapse
yes

347111268 said:
when i flash it ,i can`t mount my /data
my device is mi 11 star
Click to expand...
Click to collapse
on android 11 the same......

Edlar said:
on android 11 the same......
Click to expand...
Click to collapse
Send logs
adb pull /tmp/recovery.log
adb logcat > logcat.txt

Nebrassy said:
Send logs
adb pull /tmp/recovery.log
adb logcat > logcat.txt
Click to expand...
Click to collapse
Hi there !
Can't mount /data neither Mi 11 Star on A12 (latest weekly EU Rom), removed password before fastboot boot twrp.img
Tried to adb pull /tmp/recovery.log, but :
adb: error: failed to get feature set: no devices/emulator found
you do this on fastboot mode, right ?
Thank you

jiyuugataki said:
Hi there !
Can't mount /data neither Mi 11 Star on A12 (latest weekly EU Rom), removed password before fastboot boot twrp.img
Tried to adb pull /tmp/recovery.log, but :
adb: error: failed to get feature set: no devices/emulator found
you do this on fastboot mode, right ?
Thank you
Click to expand...
Click to collapse
did you try if its connected by typing fastboot devices?

jiyuugataki said:
Hi there !
Can't mount /data neither Mi 11 Star on A12 (latest weekly EU Rom), removed password before fastboot boot twrp.img
Tried to adb pull /tmp/recovery.log, but :
adb: error: failed to get feature set: no devices/emulator found
you do this on fastboot mode, right ?
Thank you
Click to expand...
Click to collapse
Try going to mount menu, disable mtp and enable it, then check id adb is recognized

Nebrassy said:
Try going to mount menu, disable mtp and enable it, then check id adb is recognized
Click to expand...
Click to collapse
Worked, here are the logs
Thx !
Edit : That's strange, when i try to attach files, they upload and then disappear when i save
so, recovery :
recovery.log - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
logcat part1 : https://pastebin.com/ZPenY56E
part 2 : https://pastebin.com/6MYkJs5R

marcel112 said:
did you try if its connected by typing fastboot devices?
Click to expand...
Click to collapse
Tried and no problem
But, solved, thank you nonetheless

Hello everyone, I can't access to my data in TWRP completely because I want to flash magisk; any solution?

datadelrey said:
Hello everyone, I can't access to my data in TWRP completely because I want to flash magisk; any solution?
Click to expand...
Click to collapse
did you remove password or pin?

Great news!
I am wondering if there is a roadmap when TWRP will be available for A12?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everything is fine, a log file appeared after I backed up the boot, I hope it's useful

please make a clear tutorial on how to fix the unable to mount/data
i removed the pin and password before fastboot boot twrp.img, go to advanced flash current twrp, and when i restart the device it goes to fastboot again.

Nebrassy said:
Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
4. select the new image
5. after that is done, if you were using a custom kernel, reflash it now
6. if you were using magisk, reflash it now
Click to expand...
Click to collapse
How to update if we are currently use a different TWRP? I mean not "official".

Mi 11 Ultra / star
Using EU 12.5.20 and twrp 3.5.1
Update to 3.6.0 via Install Zip in 3.5.1
Reflash EU rom after update twrp and booted normally now.
Working fine. Thank you.

@hacker738 and now check, which version of TWRP is installed
if 3.6.0 then I'll really congratulate you

[UNOFFICIAL][RECOVERY][PitchBlackRecoveryProject] PBRP For Lenovo Tab 4 8 ( TB-8504X/F )

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.5.2
PitchBlack version: 3.1.0
For Device: Lenovo Tab 4 8 TB-8504X/F
Build by: @Electron.48
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Device Trees: Device Trees
Fully native android like UI
Full dark theme with changeable accents
Reorganized menus
Use AromaFM as default file manager
Various tools are include
System debloater available
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions:
Fastboot Method:
Download PBRP-TB8504-3.1.0-20220528-1258-UNOFFICIAL.img
Open Terminal where u have downloaded the pbrp img file
Go into Bootloader
Apache config:
adb reboot bootloader
Flash the recovery image
Code:
fastboot flash recovery PBRP-TB8504-3.1.0-20220528-1258-UNOFFICIAL.img
Reboot to Recovery and congrats you have successfully installed PBRP.
Flashing ZIP:
You should have a custom recovery already for this method
Flash the PBRP-TB8504-3.1.0-20220528-1258-UNOFFICIAL.zip in your custom recovery
Press volume down button to reboot to PBRP.
Congrats. You have successfully installed PBRP
What works:
Everything ( May find bugs its in testing phase )
Bugs:
You tell me
Downloads:
PBRP-TB8504-3.1.0-20220528-1258-UNOFFICIAL.img
PBRP-TB8504-3.1.0-20220528-1258-UNOFFICIAL.zip
Credits:
TeamWin for TWRP
PitchBlack Team for PBRP
@highwaystar_ru for Device Trees
Status:
Testing
Release Date:
28-05-2022

reserved

Awesome recovery and thanks for tools feature
Only one bug : touch is not responding but turning display off than on fix it.
Question : is it possible to restore twrp backups using PBRP

ZONTAC said:
Awesome recovery and thanks for tools feature
Only one bug : touch is not responding but turning display off than on fix it.
Question : is it possible to restore twrp backups using PBRP
Click to expand...
Click to collapse
Ig it should be possible. Try to copy the backups in PBRP folder then restore. Tell if it works or not

ZONTAC said:
Awesome recovery and thanks for tools feature
Only one bug : touch is not responding but turning display off than on fix it.
Question : is it possible to restore twrp backups using PBRP
Click to expand...
Click to collapse
Btw can u share some screenshots...?

Electron.48 said:
Ig it should be possible. Try to copy the backups in PBRP folder then restore. Tell if it works or not
Click to expand...
Click to collapse
Working

it doesnt work it just goes to the normal android recovery after i try to use it after flashing

stinkysockboi said:
it doesnt work it just goes to the normal android recovery after i try to use it after flashing
Click to expand...
Click to collapse
Tell in detail or provide log so that dev can work on it

Electron.48 said:
Bugs:
You tell me
Click to expand...
Click to collapse
So TB-8504F has a touchscreen issue where you need to sleep and wakeup recovery after it boots for touch to work. Like what @ZONTAC mentioned earlier. I was able to fix it on TWRP 3.6.2 that I built for testing. I would imagine it would work for PBRP as well. It does not affect TB-8504X which is why its not commonly seen. The F variant is not as popular. I have not tested it on 8504X mind you but I don't think that flag will be needed by it.
TB-8504F: Remove blank on boot · deadman96385/[email protected]
This flag kills the Himax touch until you lock and unlock on TB-8504F but strangely does not affect TB-8504X
github.com

deadman96385 said:
So TB-8504F has a touchscreen issue where you need to sleep and wakeup recovery after it boots for touch to work. Like what @ZONTAC mentioned earlier. I was able to fix it on TWRP 3.6.2 that I built for testing. I would imagine it would work for PBRP as well. It does not affect TB-8504X which is why its not commonly seen. The F variant is not as popular. I have not tested it on 8504X mind you but I don't think that flag will be needed by it.
TB-8504F: Remove blank on boot · deadman96385/[email protected]
This flag kills the Himax touch until you lock and unlock on TB-8504F but strangely does not affect TB-8504X
github.com
Click to expand...
Click to collapse
But i have 8504X variant

ZONTAC said:
But i have 8504X variant
Click to expand...
Click to collapse
Your recovery advertises that it supports both variants. That patch will fix the issue on TB-8504F, it should not change anything on TB-8504X but I don't have that version to confirm.

deadman96385 said:
Your recovery advertises that it supports both variants. That patch will fix the issue on TB-8504F, it should not change anything on TB-8504X but I don't have that version to confirm.
Click to expand...
Click to collapse
If you have build so i can test it on my tab(8504x)

Do You have any idea?
Freshly flashed stock, there everything works, but I cannot flash any ROM - tried both crDroid, RR and Ubuntu. Always same error.
Strange is it mounts system at first... And after formatting it can be mounted again, but than I got error, cos no image is there to be patched, I believe?

ch3mn3y said:
Do You have any idea?
Freshly flashed stock, there everything works, but I cannot flash any ROM - tried both crDroid, RR and Ubuntu. Always same error.
Strange is it mounts system at first... And after formatting it can be mounted again, but than I got error, cos no image is there to be patched, I believe?
Click to expand...
Click to collapse
Follow proper processor
In your case :- if you are coming from stock , 1. mount system in stock recovery
2.flash pbrp/twrp
3. do factory wipe(or reset)
4. do advance wipe in which wipe system, cache, delvick ,data
5.after that flash system
6. Still having problem try d/f twrp or contact rom dev

Did a test boot without flashing. System starts but hangs on many tasks, even restarting to other modes hangs the system. My device reports as tb_8504x. I had problem with flashing through TWRP so I wanted to try PBRB.

Hello, I got PBRP to boot into recovery, I have OEM bootloader unlocked and USB debugging enabled. I'm trying to completely format the tablet to install LineageOS 18. When I wipe the process gets stuck on "Formatting system using mke2fs". It's been on it for about an hour now. Is that normal? The device is responsive. I can hold the power button down and get reboot options. I can force a reboot and get back into the recovery and try again but each time it gets halted at the format stage. What should I do?

Development [RECOVERY][UNOFFICIAL] TWRP for Galaxy Tab S8 Series (Snapdragon)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy Tab S8 X906B, X906C, X906N, X900, X806B, X806C, X806N, X800
Download & Guide:
1. Unlock your bootloader.
2. Downloads for Tab S8: gts8u twrp, gts8p twrp , gts8 twrp and kernel
3. Reboot to download mode
4. Put the TWRP TAR for your device with Odin in the AP slot, vbmeta_disabled_R.tar in USERDATA slot and click start.
5. Reboot to recovery via recovery key combo (Vol up + power + USB connected).
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.​If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.​- Type: multidisabler again. will see - Finished. when done.​- Go back to Wipe > Format Data > type yes.​- Reboot to recovery.​7. Flash custom kernel and magisk apk in twrp.
8. Reboot to system, Enjoy.
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@ianmacd for multidisabler
@Dan_FFM (David Dean) for helping with convert readonly f2fs vendor to readwrite
Donators
Sources:
Kernel tree
Device tree: gts8u, gts8p

Changelog:
GitHub History Tab S8
GitHub History Tab S8+
GitHub History Tab S8 Ultra

Note1: You need a custom permissive kernel to boot with R/W vendor.
Note2: If you got bootloop on Samsung logo, reboot to TWRP and wipe metadata from Advanced Wipe section

You have no idea how excited I got when I saw this. I'm going to try this first thing tomorrow and post my results! One question though; When you said "You need a custom permissive kernel to boot with R/W vendor.", is that the one that you've linked in the initial post?

SavXL said:
You have no idea how excited I got when I saw this. I'm going to try this first thing tomorrow and post my results! One question though; When you said "You need a custom permissive kernel to boot with R/W vendor.", is that the one that you've linked in the initial post?
Click to expand...
Click to collapse
Yes its.
Also if anyone have the regular Tab S8 send me recovery.img here or on telegram

Sure, this is for X700XXU1AVCD/X700OXM1AVCD/X700XXU1AVCD (Tab S8 Wi-Fi Middle East).
I used this to root but it may be corrupt so you might wanna check.
Download

Hello ,
Is it possible with this twrp version to use the sd card also ? Thank you for your answer .

I see magisk v25 change log mentions
Fix vb meta extraction implementation.
So does that mean magisk v25 will disable vb meta automatically now?

Techguy777 said:
I see magisk v25 change log mentions
Fix vb meta extraction implementation.
So does that mean magisk v25 will disable vb meta automatically now?
Click to expand...
Click to collapse
I belive so. IIRC, if you've rooted your tablet by patching the AP file with Magisk and flashed it in Odin, then vbmeta should already be disabled. Magisk, and therefore root, will still persist even after a factory data reset because your device is running Magisk as a system app.

Finally awake. Gonna go ahead and flash TWRP on my Tab S8+ and share my results!

SavXL said:
I belive so. IIRC, if you've rooted your tablet by patching the AP file with Magisk and flashed it in Odin, then vbmeta should already be disabled. Magisk, and therefore root, will still persist even after a factory data reset because your device is running Magisk as a system app.
Click to expand...
Click to collapse
I don't know about magisk becoming a system app I own the tab s6 I'm on one UI 4.1 and have magisk v25 And it doesn't install the system app so I don't know about that. I don't own s8 tablet

Techguy777 said:
I don't know about magisk becoming a system app I own the tab s6 I'm on one UI 4.1 and have magisk v25 And it doesn't install the system app so I don't know about that. I don't own s8 tablet
Click to expand...
Click to collapse
Then don't spam every thread with tab s6 topics

I come baring results. I flashed TWRP and vbmeta in Odin as described in the initial post, and it booted into TWRP! However, the good news ends there. The touch screen doesn't seem to work when in TWRP, and interestingly, when I have the keyboard attachment on, the install button darkens as if I'm pressing it no matter what I do on the trackpad. I've tried rebooting the tablet by holding pow + vol- but all it does is reboot once and then put me back in TWRP. I can use ADB to go into download mode, but I can't boot back to Android. Looks like I'm gonna need to flash my patched firmware and try again when this gets fixed. For context, I flashed the gts8p TWRP tar because I have a Tab S8+, but the WIFI only variant (X800), which is in the supported versions list, so I'm not sure what went wrong.

SavXL said:
I come baring results. I flashed TWRP and vbmeta in Odin as described in the initial post, and it booted into TWRP! However, the good news ends there. The touch screen doesn't seem to work when in TWRP, and interestingly, when I have the keyboard attachment on, the install button darkens as if I'm pressing it no matter what I do on the trackpad. I've tried rebooting the tablet by holding pow + vol- but all it does is reboot once and then put me back in TWRP. I can use ADB to go into download mode, but I can't boot back to Android. Looks like I'm gonna need to flash my patched firmware and try again when this gets fixed. For context, I flashed the gts8p TWRP tar because I have a Tab S8+, but the WIFI only variant (X800), which is in the supported versions list, so I'm not sure what went wrong.
Click to expand...
Click to collapse
Thanks for the feedback, will look into it soon. If you can send me vendor/firmware folder will try to fix touch.

afaneh92 said:
Thanks for the feedback, will look into it soon. If you can send me vendor/firmware folder will try to fix touch.
Click to expand...
Click to collapse
How do I do that? Is it a command I can run in adb?

SavXL said:
How do I do that? Is it a command I can run in adb?
Click to expand...
Click to collapse
Use root explorer, zip the folder and upload it

afaneh92 said:
Use root explorer, zip the folder and upload it
Click to expand...
Click to collapse
Alright, will do once I get back into android.

afaneh92 said:
Use root explorer, zip the folder and upload it
Click to expand...
Click to collapse
Alright, here's the vendor folder! It's compressed from the original size (~2.15GB).
715 MB file on MEGA
mega.nz

SavXL said:
Alright, here's the vendor folder! It's compressed from the original size (~2.15GB).
715 MB file on MEGA
mega.nz
Click to expand...
Click to collapse
Wow, I asked for firmware folder from vendor not the whole vendor.

afaneh92 said:
Wow, I asked for firmware folder from vendor not the whole vendor.
Click to expand...
Click to collapse
Ohhhhhhhhhh, I'm sorry LOL. When you said vendor/firmware I assumed you said to upload the vendor folder OR the firmware folder. I'll remember that for next time. XD