This tool will help you upgrade from EMUI 9.0 to EMUI 9.1 .
Requirements:
- Unlocked Bootloader
- A rooted device (if you don't have root use the TWRP EMUI_9.1_Flasher tool.Bootloader unlock is required))
- ADB Debug enabled
- A PC with Windows OS
- EMUI 9.1 FullOTA firmware
- Ability to follow some simple on-screen instructions
Credits:
@ante0 - for the new Pie based no-check recovery --> you should thank him here
all the others that contributed to this tool
Instructions:
- Download and extract the tool
- Connect your device to the PC and make sure ADB Debugging it's enabled
- Launch the Flash.bat
- Follow the on-screen instructions
Download
EMUI9.0_to_9.1_update_tool.zip
EMUI9.0_to_9.1_update_tool_root.zip -- This version will also install Magisk 19.3 Stable - Magisk Manager it's optional and can be skipped
EMUI_9.0_to_9.1_update_tool_root_3_files.zip -- This version will allow you to flash the base firmware,cust and preload.Obviously,you can skip the Magisk part if you want
TWRP EMUI_9.1_Flasher -- This tool won't require a rooted device
EMUI_9_0_TWRP_Flash_Unbrick_Tool.zip -- Use this tool to flash an EMUI 9.0 firmware if your device is soft bricked and is no longer booting to EMUI OS
Firmwares Collection :
BLA-L29 C432 - 9.1.0.300 - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019/post79923909
BLA-L09 C432 - 9.1.0.300 -> https://forum.xda-developers.com/showpost.php?p=79932379&postcount=14 <- base firmware it's the same as BLA-L29
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
syd-3 said:
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
Click to expand...
Click to collapse
Hi! I don't know which version it's fine for your device and the only way to know it it's to flash it yourself, but i don't recommend you to do that.
Rooting with Magisk is fine on 9.1, just read the latest posts from this thread - > https://forum.xda-developers.com/mate-10/how-to/guide-magisk-root-mate-10-pro-t3886967/page27
As for the roll-back, ut should be possible to do it with this tool and an appropriate roll-back firmware (again, firmware version might depend on your cust/brand).
I recommend you to keep an eye and also read this thread - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
tokoam said:
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
Click to expand...
Click to collapse
B303 is not for A09, it's for C800 which is some jp cust.
Most new fw links are not up yet, and since Huawei decided to name all their firmware the same regardless of model its hard to know which is which :/
Success! Updated BLA-L29C432. Thank you!
Krasimir said:
Success! Updated BLA-L29C432. Thank you!
Click to expand...
Click to collapse
Great! Soon i will upload a new version that will also flash the patched Magisk ramdisk_recovery and Magisk Manager (this one will be optional, so those who already have it, can skip it).
It worked for me also.
Why is root needed? Unlocked bootloader is not enough?
criszz said:
Why is root needed? Unlocked bootloader is not enough?
Click to expand...
Click to collapse
Nope! Well, it can be done without root too, but it would require twrp in that case.
Firmware for Bla-l09c432 ?
MagicBox96 said:
Firmware for Bla-l09c432 ?
Click to expand...
Click to collapse
Somewhere on Huawei's servers! xD
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
MagicBox96 said:
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
Click to expand...
Click to collapse
as stated before, since every update is named the same it's hard to tell which is L09, L29, A09 or AL/TL. AL/TL are easier as VERSION.mbn in UPDATE.zip doesn't have Global strings in it.
From what it seems, if you flash L09 on L29 or vice versa you get endless OTA updates for preload and cust. I don't know if just flashing the cust and preload zips fixes it, but you're free to try if you want.
Here's L09 preload and cust:
Preload: http://update.hicloud.com:8180/TDS/...full/update_full_preload_BLA-L09_hw_eu_R1.zip
Cust: http://update.hicloud.com:8180/TDS/...4//f1/full/update_full_cust_BLA-L09_hw_eu.zip
modified tool to include preload and cust:
https://mega.nz/#!oDR2DYCI!SRQlTq1IriGcEt1Wr--ggrBk7uZ4M_R8OwE6DdvmEEc
Extract and put in the EMUI 9.0 to 9.1 update folder.
Rename cust zip to update_cust.zip and preload to update_preload.zip, put in ZIPS-HERE folder, run modified bat.
Thank you very much, I try very soon. Have any of you done that already?
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
I did on L29 with L29 preload and cust, no problems.
Base (280955) seem to be the same for both L09 and L29 C432.
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
Soon i will upload a new tool that will let you flash all the 3 files, so you could wait. Also, a fried of mine is testing on BLA-L09 C432.
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
MagicBox96 said:
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
Click to expand...
Click to collapse
Tool updated. However, if you don't have root, you can't use it, you must root first.
Okay, I thought it was a tool like the ones we made earlier to install EMUI 9. I'll wait until the new tool is released. : D
Related
Hi guys
Someone has succeeded with downgrade from oreo to nougat ? I need go to huawei service, to exchange the display, but problem is "relocked bootloader"
So many tutorials here, which to follow for downgrade and have "locked bootloader" ?
You can use HiSuite or install the downgrade firmware through Firmware Finder. It has the normal Nougat version, but in the description it tells that it downgrades.
HiSuite tells me that I have the latest version so.. I cant downgrade from HiSuite, or if i can tell me how to do it please
@yungshadow
As M1chiel said, try with Firmware Finder.
Remember!! Everything is on your own risk!!
Don't know which version you have, but for me this is the roll back firmware...
Let's try. But.. still 0%
If you use proxy option, you have to set proxy in WiFi settings.
localhost and 8080
Then start download and wait until 4-5%, then disable proxy and continue download.
i'm using DNS. Now 11% XD
ok i'm finally have emui 5. Now i must rebrand ?
That I don't know, I already didn't understand why you wanted to downgrade ??
yungshadow said:
ok i'm finally have emui 5. Now i must rebrand ?
Click to expand...
Click to collapse
Look here: https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013/page38
Can't do anything with this trash device, even TWRP fails to install. What a waste of money!
djg269 said:
That I don't know, I already didn't understand why you wanted to downgrade
Click to expand...
Click to collapse
I need to have bootloader status "locked" not "relocked" so i must rebrand to l09 and back to l29 yeah?
Ok guys
I Found a solution.
1. Downgrade from Oreo via FF using B185 (downgrade firmware) thanks
djg269 said:
2. Download some L09 firmware and install via FF
3. After installing I had bootloop (huawei logo, booting system for 10-15 sec and still restarting)
4. Enter eRecovery VOL-UP + POWER > Wipe data and cache
5. After Wipe phone said it's still L29 but now bootloader is locked not relocked
So i'm done now
Click to expand...
Click to collapse
Glad you got it fixed!!
Sent from my VTR-L09 using XDA Labs
I have a small question - in FF it says to make sure my current version is not "unlocked" - does that mean the bootloader or...? I just want to downgrade to B180 so I can install HuShed. I'm on L29C432B360 currently.
I don't remember this information. Could u send here Screenshoot with that dialog from FF ?
Same screenshot as post #4 -> https://forum.xda-developers.com/showpost.php?p=76556011&postcount=4
I used b185 from b360 with unlocked bootloader and I had no problems.
You should use b185(rollback firmware) and after this will be able toinstall whatever you want
Alright, last question - I have TWRP installed for 8.0. Will this affect the downgrade somehow? Because for example I can't install OTAs with TWRP. I'm sorry I'm kinda new to these kinds of stuff.
I didn't have installed twrp for 8.0 when i Decided to do downgrade so I think it doesn't matter but you can flash stock recovery for 8.0 if u want ofc.
Now i'm on 8.0.0.365(c432) but with official OTA update
It is possible to update the equipment with Android 9 with the signed firmware (Huawei Finder) and with the bootloader blocked, my device is a VTR-L29C605B374 and as I have seen in FF there is an update with Anddoid 9 for my IMEI, but my P10 is not in any update
try throu HiCare! and yes you can with eRecovery just follow steps!
the-bomber said:
try throu HiCare! and yes you can with eRecovery just follow steps!
Click to expand...
Click to collapse
From Hicare, my phone is in the last Update, but in FFinder there is one Update to Android Pie, what steps should I follow to update the P10 manually, that is, download the files from FF and update locally or some method that does not need the open bootloader?
My phone has C605B374 (last official Update)
no you don't need unlocked bootloader. go to firmware finder click on ur firmware and check if its approved then click on eRecovery method and follow instructions
You can try this method here to update using Hisuite on the PC, along with Firmware Finder on your phone: https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
Be sure to upgrade to B386 version first, before attempting to go to Pie, for best chance of success and lowest risk.
the-bomber said:
try throu HiCare! and yes you can with eRecovery just follow steps!
Click to expand...
Click to collapse
Thanks, Hisuite and method host working, my phone was updated to Android 9 from C605B374
how did you update please help us. thank you
NowLearn said:
how did you update please help us. thank you
Click to expand...
Click to collapse
Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy.
NOTE: Follow the link and download archives
Necrodaemon said:
Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy.
NOTE: Follow the link and download archives
Click to expand...
Click to collapse
I tried. It said failed to connect. I have a vtr-l09 c025. What version do your recommend for Latin America? Thank you
the-bomber said:
no you don't need unlocked bootloader. go to firmware finder click on ur firmware and check if its approved then click on eRecovery method and follow instructions
Click to expand...
Click to collapse
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
RubAnADUB said:
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
Click to expand...
Click to collapse
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
I see an update on HiCare,i'm clicking the check box but it says try later...i have vtrl09 version...
the-bomber said:
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
Click to expand...
Click to collapse
I found one that said it was yes on verify, but when I hit register for erecovery it just started loading the dang 8.0 one instead....
the-bomber said:
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
Click to expand...
Click to collapse
hi, i follow the instruction, but when i connect to erecover, with HISUITE, it gives me the error. what am i doing wrong? i added the ip to host table,thank you
I need help with these files. I downloaded 2 files from the firmware finder. then extracted them. I know they are supposed to go to a dload folder but I am confused on how to combine them?
https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/
RubAnADUB said:
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
Click to expand...
Click to collapse
VTR-L29C185E3R1P9B159 (9.0.1.159)
VTR-L09C185E3R1P9B159 (9.0.1.159)
Now you must verify if it is approved for your IMEI and install using Hisuite
PD: Search firmware in FF .... VTR-L29CXXX (XXX = CUST)
NowLearn said:
I tried. It said failed to connect. I have a vtr-l09 c025. What version do your recommend for Latin America? Thank you
Click to expand...
Click to collapse
Verify changes in host, drivers USB, HDB in Phone (install and approved connection), then Firmware approved for you IMEI
Necrodaemon said:
Verify changes in host, drivers USB, HDB in Phone (install and approved connection), then Firmware approved for you IMEI
Click to expand...
Click to collapse
Me puedes aayudar porvor? sale error FAILED TO UPDATE, lo hice tal cual lo publicaste. No me llego la actualizacion que prometio huawei xd debe ser solo para los operadores clavistel solamente xd.
gracias de antemano.
Service firmware Emui 9.1 PE C432 huawei p smart(2018) + root Magisk
This is the fig lx Emui 8 firmware on fig lx EMUI9.1 location c432 9pe.android.
Downloading the firmware, unpack the necessary files into the DLOAD folder. And put the folder with the firmware on the DLOAD sd card. Turn off the phone: hold down + - and turn it on after vibration, watch the firmware process. After the firmware, a hard reset will occur, and the boot loader is locked (before the firmware, make sure that stock recovery is in place)
Download firmware :
download
Installing root. Unlock bootloader, install
TWRP
..
We will need:
Magisk manager installed on the phone. RECOVERY_RAMDIS.img pulled from UPDATE.APP firmware How to patch stock recovery: We go in tel. in Magisk manager click Install Select patch file We are looking for our RECOVERY_RAMDIS waiting for the end (the path is specified after completion) magisk_patcher.img. The path of the phone memory folder Download If twrp with encryption, our patched file is transferred to our magisk_patcher.img.
1.We go to TWRP, if twrp is not in the Erecovery section, then we flash it into erecovery through img. (Wish) images.
2. We are patching our patched stock recovery to the recovery section.
3.We do through Twrp a reboot in recovery to start the root (it will not go into rekoveri already) With EVERY boot, if we want to root, we boot into the recovery (volume + when turned on), when rebooting, Magisk Manager does this automatically. Route received. What works: Full root, Magisk Hide and everything connected with it including Google Pay, as well as eRecovery What does not work: It is impossible to install a stock recovery, which means that to update the system you need to flash the native recovery, update it, and then do the procedure again.
Ready patched Stock recovery flash in RECOVERY section for C432 9.1.0.115
Download patched: download
Download Magisk : download
Already come updates on the C432, wait, or check through applications Hicare Norway choose a country.
Sorry for the English, Greetings from Belarus, from the forum 4p da. #mak6021
Is this for 2018 or 2019 model?
harry_turtle said:
Is this for 2018 or 2019 model?
Click to expand...
Click to collapse
2018
So, can I use this firmware to upgrade from emui8 to emui9?
tissa_ said:
So, can I use this firmware to upgrade from emui8 to emui9?
Click to expand...
Click to collapse
Yes
will this work on C782?
punteruk said:
will this work on C782?
Click to expand...
Click to collapse
Try, but I do not guarantee, firmware for c432
Hello is this beta or full release ?
0ckysaurus said:
Hello is this beta or full release ?
Click to expand...
Click to collapse
Official firmware, not beta.
What is the language of the rom?
lecortes said:
What is the language of the rom?
Click to expand...
Click to collapse
Multi-language firmware all languages.
mak6021 said:
Official firmware, not beta.
Click to expand...
Click to collapse
where you find this firmware?
javadoverall said:
where you find this firmware?
Click to expand...
Click to collapse
androidhost
This is the official firmware. Do not doubt
:angel:
mak6021 said:
androidhost
This is the official firmware. Do not doubt
:angel:
Click to expand...
Click to collapse
same body tested for another model.. like fig la1..?
Are you think answer for another model
javadoverall said:
same body tested for another model.. like fig la1..?
Are you think answer for another model
Click to expand...
Click to collapse
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?
mak6021 said:
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?
Click to expand...
Click to collapse
why?
Hi.
If I do not want to root my cell phone. What should I do for this?
freeuser00 said:
Hi.
If I do not want to root my cell phone. What should I do for this?
Click to expand...
Click to collapse
Download only the firmware but it will lock your bootloader
How does rooting keep the bl unlocked?
I have a FIG-LX1 that I rebranded to C432 and I patched NVME to unlock Bootloader
Can I and how do I re unlock the bootloader on Emui 9
And how to I downgrade to Emui 8
Thanks in advance
Can someone create a mirror? Download max reached...
Hi All,
I'm new here so please let me know if I've posted incorrectly.
I have a second hand Honor 9 Lite that I would like to use here in the UK.
It has LLD-AL10 (Build 9.1.0.130) EMUI 9.1.0 Android 9.
I think the 'firmware' I need for European is LLD-L31.
Firstly is it possible to change these base operating systems from one country/region to another please?
Secondly if it's possible and can be done ... how do I do it please?
It's a given to me handset with not data to worry about, factory reset unlocked handset.
It looks very nice and I didn't want to give up on it because I can not get the play store and standard gmail apps.
Many thanks in advance.
Gray
GrayInTheUK said:
Hi All,
I'm new here so please let me know if I've posted incorrectly.
I have a second hand Honor 9 Lite that I would like to use here in the UK.
It has LLD-AL10 (Build 9.1.0.130) EMUI 9.1.0 Android 9.
I think the 'firmware' I need for European is LLD-L31.
Firstly is it possible to change these base operating systems from one country/region to another please?
Secondly if it's possible and can be done ... how do I do it please?
It's a given to me handset with not data to worry about, factory reset unlocked handset.
It looks very nice and I didn't want to give up on it because I can not get the play store and standard gmail apps.
Many thanks in advance.
Gray
Click to expand...
Click to collapse
-----
I think to know if anyone has ever done this is my starting point.
i.e. is it possible to do?
Thanks
GrayInTheUK said:
-----
is it possible to do?
Thanks
Click to expand...
Click to collapse
Yes, it is. You need :
1. downgrade to Oreo via HiSuite (process will erase all your data!)
2. unlock bootloader on your phone (you must downgrade to lower build number with google security patch from 04.2018.)
3. download fullOTA-MF Oreo firmware for region C432 from Firmware Finder
4. rebrand your device to C432 using tool "HWOTA8_LLD"
https://forum.xda-developers.com/9-lite/help/rebrand-honor-9-lite-chinese-frimware-t3739762/page3
Or, after bootloader unlocking, root your phone and simly flash Open-GAPPS via TWRP. (a simpler solution, IMO).
bozka1 said:
Yes, it is. You need :
1. downgrade to Oreo via HiSuite (process will erase all your data!)
2. unlock bootloader on your phone (you must downgrade to lower build number with google security patch from 04.2018.)
3. download fullOTA-MF Oreo firmware for region C432 from Firmware Finder
4. rebrand your device to C432 using tool "HWOTA8_LLD"
https://forum.xda-developers.com/9-lite/help/rebrand-honor-9-lite-chinese-frimware-t3739762/page3
Or, after bootloader unlocking, root your phone and simly flash Open-GAPPS via TWRP. (a simpler solution, IMO).
Click to expand...
Click to collapse
Thank you so very much, I really want to use this so I am going to try your suggestion very soon.
I'm going to try hard to understand these individual steps, there is nothing on the phone to worry about so that's a start. Hopefully I can find a way following your kind suggestion.
Many thanks
GrayInTheUK said:
Many thanks
Click to expand...
Click to collapse
Anytime
bozka1 said:
Anytime
Click to expand...
Click to collapse
I've completed the first part after connecting through HiSuite and downgrading to AL10 8.0.0.189(C00)
Does the process cost? i.e. do I need to buy credits in these stages please?
Next is unlocking the boot loader and the lower build number with that 04.2018 security patch somehow?
Many thanks
Gray
GrayInTheUK said:
I've completed the first part after connecting through HiSuite and downgrading to AL10 8.0.0.189(C00)
Does the process cost? i.e. do I need to buy credits in these stages please?
Next is unlocking the boot loader and the lower build number with that 04.2018 security patch somehow?
Many thanks
Gray
Click to expand...
Click to collapse
Next is downgrading to the lower build number, You need to buy credits . You can try two firmware only, LLD-AL10 8.0.0.100(C00) or LLD-AL10 8.0.0.171(C00).
8.0.0.171 contains Google patch from 05.2018, but it's worth a try...
https://easy-firmware.com/index.php?a=downloads&b=file&id=112841
Extract the archive contents and follow instructions in "ReleaseDoc" .
bozka1 said:
Next is downgrading to the lower build number, You need to buy credits . You can try two firmware only, LLD-AL10 8.0.0.100(C00) or LLD-AL10 8.0.0.171(C00).
8.0.0.171 contains Google patch from 05.2018, but it's worth a try...
https://easy-firmware.com/index.php?a=downloads&b=file&id=112841
Extract the archive contents and follow instructions in "ReleaseDoc" .
Click to expand...
Click to collapse
Many thanks for your replies.
Best Gray
Hi,
What is the current working method to update firmware on an unlocked rooted CLT-L09?
I would like to keep root and unlocked.
It's currently on 9.1.0.328. I see there are 9.1.0.388 and 10.0.0.157 available. Are there any negative consequences of updating to 10?
Apologies if this has been answered before but there are too many methods posted over various time for various versions it is hard to decipher which is the latest working version for my situation.
Thank you!
K
Download from FF and extract the original recovery from 9.1.0.328 and flash it. Now you're back on stock/unlocked. check the OTA updates. and after the update apply magisk again and you will be rooted on the last version. The procedure is the same to continue updating. Android 10 isn't ready for P20 pro, neither is root.
Horayken said:
Download from FF and extract the original recovery from 9.1.0.328 and flash it. Now you're back on stock/unlocked. check the OTA updates. and after the update apply magisk again and you will be rooted on the last version. The procedure is the same to continue updating. Android 10 isn't ready for P20 pro, neither is root.
Click to expand...
Click to collapse
I've got the 328 update_full_base.zip but how do I extract the original recovery? The only img file inside is ptable.img
Sorry if this is a dumb question haven't flashed the phone in a while.
there is an app called huawei extractor. i'ts here on XDA. Disable checksum verify if gives an error while trying to extract.