Database Develop

No sound

Hi all! I have Moto X 2014 1096. I unlocked the bootloader and install 6.0 for 1095. The first time it was good. The day began to disappear sound from the speaker (there was no sound for calls, media, notifications). I thought I might have got something in 3.5 jack, but everything was clean. I cleaned cash, wipe data, factory reset, again flashed 6.0, but but the sound was not.
Sorry for my English
Please help!

Switch again to older version and check it?

Salik Iqbal said:
Switch again to older version and check it?
Click to expand...
Click to collapse
If I flashed 5.1 will not get soft break?

Yes as partition downgrade is not allowed.. so
Edit xml remove first lines till logo, Flash only these partition:
boot
system
recovery
nonhlos
fsg.mbn
Andyrv said:
If I flashed 5.1 will not get soft break?
Click to expand...
Click to collapse

Salik Iqbal said:
Edit xml remove first lines till logo, Flash only these partition:
boot
system
recovery
nonhlos
fsg.mbn
Click to expand...
Click to collapse
Thanks! If I install custom recovery like TWRP whether to perform operations that you wrote?

Andyrv said:
Thanks! If I install custom recovery like TWRP whether to perform operations that you wrote?
Click to expand...
Click to collapse
yes if you can find older backup of twrp stock rom, then flash recovery as twrp and restore the system and boot.

Thank you! When I will be at home I try flash 5.1

Flashing did not help there is still no sound

Fix for (N/A) on Boot Logo Screen ?

UPDATE: Magendanz posted an awesome version of what I tried to do. Their version doesn't have bad artifacts and noticable pixels, so I'd heavily recommend using their version! It is titled (PixelBootAnimation.E4.zip) in the attachments.
I used the MotoBootLogoMaker to create this TWRP flashable ZIP. This was made for my personal phone, but I wanted to share with others in case they had the same problem. Hope this helps someone!

MrIndieJ said:
I used the MotoBootLogoMaker to create this TWRP flashable ZIP. This was made for my personal phone, but I wanted to share with others in case they had the same problem. Hope this helps someone!
Click to expand...
Click to collapse
what input in moto boot logo maker did you use when making the boot logo?

MarioMasta64 said:
what input in moto boot logo maker did you use when making the boot logo?
Click to expand...
Click to collapse
Can you clarify? I just replaced all the boot images with the one I made.

MrIndieJ said:
Can you clarify? I just replaced all the boot images with the one I made.
Click to expand...
Click to collapse
i figured it out already

MarioMasta64 said:
i figured it out already
Click to expand...
Click to collapse
Ok, good, sorry I wasn't much help ?

MrIndieJ said:
Ok, good, sorry I wasn't much help
Click to expand...
Click to collapse
its fine lol, i opened it up in moto boot logo maker and it imported the settings (shouldve done that first lol)

MrIndieJ said:
I used the MotoBootLogoMaker to create this TWRP flashable ZIP. This was made for my personal phone, but I wanted to share with others in case they had the same problem. Hope this helps someone!
Click to expand...
Click to collapse
Is this the OEM splash from stock? If i have downloaded the stock zip with the recovery and logo.bin and f;ash that logo.bin will i have the same result?

@MrIndieJ

Sorry, the ZIP I have provided is of the splash I have created, not the stock splash.

Here's an update that I pieced together from several sources for the Moto E4/E4+ that installs both the Pixel splash and boot animation. Because of the white background, it masks the N/A nicely.

Might want to try this app: https://play.google.com/store/apps/details?id=com.vegazs.logochanger&hl=en
Looks like it has the stock Moto logo splash.
EDIT: I tried this and was unsuccessful.

I get Black background with white text saying "orange state, your device unlocked......."
No logo image while booting. direct bootanimation

Can anyone provide (or explain how) I can extract the logo and boot animation from the stock rom and apply it?

Sizzlechest said:
Can anyone provide (or explain how) I can extract the logo and boot animation from the stock rom and apply it?
Click to expand...
Click to collapse
I think you'd have to backup your current rom, install the stock rom, backup the boot animation and splash, then restore your original rom and flash the stock boot animation and splash

MrIndieJ said:
I think you'd have to backup your current rom, install the stock rom, backup the boot animation and splash, then restore your original rom and flash the stock boot animation and splash
Click to expand...
Click to collapse
I extracted the bootanimation and bootanimation.zip files and applied them to my Lineage rom (and yes, I also fixed the rights on the files) but it didn't work. The stock rom uses MP4 files for animation. I assume Lineage should support that, but I'm not 100% sure.

Sizzlechest said:
I extracted the bootanimation and bootanimation.zip files and applied them to my Lineage rom (and yes, I also fixed the rights on the files) but it didn't work. The stock rom uses MP4 files for animation. I assume Lineage should support that, but I'm not 100% sure.
Click to expand...
Click to collapse
Mine sucked compared to Magendanz's version. I have flashed theirs and would recommend you check it out. I'll quote his post below.
Magendanz said:
Here's an update that I pieced together from several sources for the Moto E4/E4+ that installs both the Pixel splash and boot animation. Because of the white background, it masks the N/A nicely.
Click to expand...
Click to collapse

MrIndieJ said:
Mine sucked compared to Magendanz's version. I have flashed theirs and would recommend you check it out. I'll quote his post below.
Click to expand...
Click to collapse
Yes, I use the Google boot screen. I extracted the logo.bin and flashed that manually using the appropriate fastboot command so I can keep the original boot animation of Lineage. I'm looking for a more stock experience. I suspect there's something simple I'm missing or Lineage simply can't handle MP4 boot animations.

Flashing Dirty Unicorns ROM 14.4

Hello. I want to flash Dirty Unicorns ROM 14.4 on my 4 xl but they don't have installation instructions posted anywhere on their website. (Has to be commen knowledge and I just don't know how to do it yet.) Anyways, is the installation process the same as other ROM's for the 4 xl? DU ROM have the radio IMG, boot IMG, and the ROM zip. From what I've read on other ROM's, it's BL first, factory reset in recovery, then flash ROM zip from stock recovery, would that work for DU ROM? Where would the radio IMG fit in terms of what's flashed first second etc? Do I have to switch boot slots? If so, do I have to do it manually? Is it necessary to flash the radio if I'm already on June update? Is this stuff common knowledge and I'm a dingaling.? Thank you in advance to anyone who can answer any and all of my questions! Still kinda new to having an unlocked BL and flashing custom ROM's etc. Thank you!!!

Pixel 4 XL flashing instructions
If this is your first time flashing DU on your Pixel
1. Download boot.img and ROM zip from DU server
2. Reboot into bootloader and flash the boot.img
fastboot flash --slot all boot boot.img
3. Reboot to recovery
4. Go to recovery select factory reset
5. Select Apply update from ADB to flash the zip
adb sideload nameofbuild.zip
6. Reboot and enjoy
Updating DU for your Pixel
1. Download ROM zip from DU server
2. Reboot into recovery and select Apply update from ADB to flash the zip
3. Reboot system now and enjoy

asif4self said:
Pixel 4 XL flashing instructions
If this is your first time flashing DU on your Pixel
1. Download boot.img and ROM zip from DU server
2. Reboot into bootloader and flash the boot.img
fastboot flash --slot all boot boot.img
3. Reboot to recovery
4. Go to recovery select factory reset
5. Select Apply update from ADB to flash the zip
adb sideload nameofbuild.zip
6. Reboot and enjoy
Updating DU for your Pixel
1. Download ROM zip from DU server
2. Reboot into recovery and select Apply update from ADB to flash the zip
3. Reboot system now and enjoy
Click to expand...
Click to collapse
NVM!!!

A few ??s
bradical711 said:
NVM!!!
Click to expand...
Click to collapse
a few ??s.. is it rooted? and also does everything work like face unlock and google pay? and does it cause any issues when flashing this if you want to return to stock or is it just as simple as flashing back to stock as you normally would flash a stock image to update or whatever? Thank you

bradical711 said:
NVM!!!
Click to expand...
Click to collapse
Did you ever get it up and running? Looking at the second part of your photo, you were flashing the wrong thing, but as for the first part, seems that it's not detecting your device, or maybe you have to update your fastboot/ADB tools. Could even be your wire. It's best to flash the stock rom first, then go on about the settings. Don't even have to setup stock, just flash, boot once, and right back into the bootloader to flash DU.
mrindependent said:
a few ??s.. is it rooted? and also does everything work like face unlock and google pay? and does it cause any issues when flashing this if you want to return to stock or is it just as simple as flashing back to stock as you normally would flash a stock image to update or whatever? Thank you
Click to expand...
Click to collapse
DU has to be pretty much the most rock solid custom ROM for the P4XL. You'll rarely find a bug or something not working. Everything works like a charm, and over on Telegram, the guys are on top of everything.
There was a little update a little while ago, DU is coming back to XDA soon, so you could also wait for the new thread to be up before flashing.

How can I root?

mrindependent said:
How can I root?
Click to expand...
Click to collapse
Read

mrindependent said:
How can I root?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pixel-4-xl/how-to/guide-pixel-4-xl-android-10-q-root-t3996969
Sent from my Pixel 4 XL using XDA Labs

Going to try now wish me luck

Curiousn00b said:
Did you ever get it up and running? Looking at the second part of your photo, you were flashing the wrong thing, but as for the first part, seems that it's not detecting your device, or maybe you have to update your fastboot/ADB tools. Could even be your wire. It's best to flash the stock rom first, then go on about the settings. Don't even have to setup stock, just flash, boot once, and right back into the bootloader to flash DU.
Click to expand...
Click to collapse
I got it up and running fine. Amazing ROM. And NVM the photo lol. Adb was working fine and it wasn't the cable. I was also able to flash stock multiple times. It was something really dumb but it's okay now. I was removing the quotations after pasting the location of the file into cmd prompt and trying to flash. Therefore nothing was being flashed to my device because a computer reads things differently and I thought removing the quotations was necessary. Definitely not and I was an idiot lol.
Sent from my Pixel 4 XL using XDA Labs

bradical711 said:
I got it up and running fine. Amazing ROM. And NVM the photo lol. Adb was working fine and it wasn't the cable. I was also able to flash stock multiple times. It was something really dumb but it's okay now. I was removing the quotations after pasting the location of the file into cmd prompt and trying to flash. Therefore nothing was being flashed to my device because a computer reads things differently and I thought removing the quotations was necessary. Definitely not and I was an idiot lol.
Click to expand...
Click to collapse
Don't know if you saw it but DU 14.6 was released.

[ROM][ONEUI 3.1][A715F]- OneOS

Rom OneOS based A715FXXS7BUJ1
read to all
Hi guys, here I share my ROM for the Galaxy A71, I am not responsible for damaged phones, install at your own risk.
This rom was born from the need to have root or some other modification in stock but Samsung has included many limitations which make it difficult to modify in stock.
Features​
Debloat
vaultkeeper disabled
FRP removed
knox counter at 0 (Samsung Health)
Fingerprint animation changed
optimizations
Google Discover enabled
Dolby without headphones
Apply themes without trial time limit
Deknoxed
Full Edge Lighting (extra effects unlocked)
Secure Folder working
Floating Feature tweaks
Mock Locations
Mock Providers
High Volume Warning (disable)
Secure Flag
Recovery Reboot (this is when you press Reboot and he Reboot to recovery)
Click to expand...
Click to collapse
BUGS: At the moment it has not reported any bug.
Installation:
Extract OneOS ROM with an unzip program
Reboot recovery
Format data
Install ROM as "super" image in TWRP
Flash muiltidisabler
Flash Magisk (optional)
Reboot
Downloads:
Version 1:
Link: Google Drive
Credits: Kernel Source (Link)

Hello from Greece
I try this rom for 2 days . Everything looks fine . I have not any problem.

Thank you very match

ZhandarbekD said:
Rom OneOS based A
Click to expand...
Click to collapse
Please check your PM inbox. Thank you.
-Regards: Badger50 FSM

Getting error 255 when flashing custom rom how to fix

Unable to flash any custom rom due to this error occurring

Here the error

Is it possible to dirtflash with NcX?

How to install ?
I get 255 error on TWRP.

papgr00 said:
Hello from Greece
I try this rom for 2 days . Everything looks fine . I have not any problem.
Click to expand...
Click to collapse
Any bug ?
How i can install ?
I getting 255 error on twrp

josegarcia01 said:
Any bug ?
How i can install ?
I getting 255 error on twrp
Click to expand...
Click to collapse
What TWRP version do you use?

Pupet_Master said:
What TWRP version do you use?
Click to expand...
Click to collapse
Twrp 3.5.1

josegarcia01 said:
Twrp 3.5.1
Click to expand...
Click to collapse
Well you may not like to risk but i feel that the error is due to TWRP not being able to write on the device.
First things first, try to download again the ROM, and don't flash the zip file, but flash the .img file inside.

Pupet_Master said:
Well you may not like to risk but i feel that the error is due to TWRP not being able to write on the device.
First things first, try to download again the ROM, and don't flash the zip file, but flash the .img file inside.
Click to expand...
Click to collapse
I did, tried to flash The img file.
And tried With twrp 3.6 too

josegarcia01 said:
I did, tried to flash The img file.
And tried With twrp 3.6 too
Click to expand...
Click to collapse
It could also be TWRP not being able to access the internal storage to write the ROM.. but im not positive

Pupet_Master said:
It could also be TWRP not being able to access the internal storage to write the ROM.. but im not positive
Click to expand...
Click to collapse
Can you help-me to solve this ?
or, how i can find on the internet ?

josegarcia01 said:
Can you help-me to solve this ?
or, how i can find on the internet ?
Click to expand...
Click to collapse
I think you should try to flash magisk and see if it flash ok
If so, i dont know what the issue is... if it wont flash ok, you will need to format your phone data

Pupet_Master said:
I think you should try to flash magisk and see if it flash ok
If so, i dont know what the issue is... if it wont flash ok, you will need to format your phone data
Click to expand...
Click to collapse
Flash ok, i tried magisk, and multidisabler, both Flash ok.
The system img as a super i get these error.

josegarcia01 said:
Flash ok, i tried magisk, and multidisabler, both Flash ok.
The system img as a super i get these error.
Click to expand...
Click to collapse
Ok, i don't know what is the problem.
Either risk format the phone data (but you will lose everything) and try to flash again... or well... wait for the author to reply.

Pupet_Master said:
Ok, i don't know what is the problem.
Either risk format the phone data (but you will lose everything) and try to flash again... or well... wait for the author to reply.
Click to expand...
Click to collapse
Everytime i tried formating data.
I dont tried withouth format data.

Question Can't Roll Back

I updated to MIUI 13 from miui.EU and now I can not go back to an older ROM even with full data formatting. I am seemingly stuck on this ROM. I really don't like it. Is there any way to go back?

Flash the older rom using fastboot method and necessary files.
Download the fastboot files from here: https://xiaomifirmwareupdater.com/
look up a "how to unbrick xiaomi" tutorial to learn how to flash a rom via fastboot

I just back to MIUI 12.5 EU from MIUI 13 EU, and I don't have problem

Hpotersept2 said:
Flash the older rom using fastboot method and necessary files.
Download the fastboot files from here: https://xiaomifirmwareupdater.com/
look up a "how to unbrick xiaomi" tutorial to learn how to flash a rom via fastboot
Click to expand...
Click to collapse
Will this work? It gave me an anti roll back notice before

[email protected] said:
I just back to MIUI 12.5 EU from MIUI 13 EU, and I don't have problem
Click to expand...
Click to collapse
I think OrangeFox was my problem I used it on the first install. I went back to TWRP but the damage was done.

Hpotersept2 said:
Flash the older rom using fastboot method and necessary files.
Download the fastboot files from here: https://xiaomifirmwareupdater.com/
look up a "how to unbrick xiaomi" tutorial to learn how to flash a rom via fastboot
Click to expand...
Click to collapse
I tried it. It won't flash.

What if I try a non Mi ROM first? Will that fix it?

Supermatt01 said:
What if I try a non Mi ROM first? Will that fix it?
Click to expand...
Click to collapse
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom

Laptapper said:
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom
Click to expand...
Click to collapse
I'll try it that way.

Laptapper said:
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom
Click to expand...
Click to collapse
I'm trying to find the vendor and fw

Laptapper said:
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom
Click to expand...
Click to collapse
No good.

Supermatt01 said:
I tried it. It won't flash.
Click to expand...
Click to collapse
Of course it won't, because the flash_all.bat has a couple lines in the beginning that have anti-rollback, you have to modify it with notepad, just open with notepad and delete those lines, then save it and flash normally.

Hpotersept2 said:
Of course it won't, because the flash_all.bat has a couple lines in the beginning that have anti-rollback, you have to modify it with notepad, just open with notepad and delete those lines, then save it and flash normally.
Click to expand...
Click to collapse
Which lines? When I tried that, it would not start.

I did it, it won't work.

I think I fixed it I took the fastboot script out of the miui 13 update and put it in the folder for the miui 12 fastboot. It stared the old boot logo. It is started now. I hope it is stable. Thank you all for the help and suggestions.