Related
Hi Guys,
Anyone that tried AOSP GSI by phhusson on the Redmi 4x:
1) Is it stable for daily use?, what is your general experience with it?.
2) What bugs did you encounter using it with Santoni?.
3) How is battery life or SOT? Is it comparable with 8.0.1 ROMs found in the Santoni section?.
4) I know for Santoni we should use the type A Arm64 with GAPPS version. I am currently on LOS 15.1 Treble and already have the redwolf recovery.
How could i install this ROM/GSI in my device?.
Thanks for your help!.
check this thread (downloads and flashing guide is given)
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/rom-android-p-developer-preview-t3816659
i think, it is not final build so it is less likely to be stable and consider as daily driver just yet.
official Android P release is just around the corner.
alejouru said:
Hi Guys,
Anyone that tried AOSP GSI by phhusson on the Redmi 4x:
1) Is it stable for daily use?, what is your general experience with it?.
2) What bugs did you encounter using it with Santoni?.
3) How is battery life or SOT? Is it comparable with 8.0.1 ROMs found in the Santoni section?.
4) I know for Santoni we should use the type A Arm64 with GAPPS version. I am currently on LOS 15.1 Treble and already have the redwolf recovery.
How could i install this ROM/GSI in my device?.
Thanks for your help!.
Click to expand...
Click to collapse
Yes I have tried it but VOLTE is not working and poor battery backup ..
alejouru said:
Hi Guys,
Anyone that tried AOSP GSI by phhusson on the Redmi 4x:
1) Is it stable for daily use?, what is your general experience with it?.
2) What bugs did you encounter using it with Santoni?.
3) How is battery life or SOT? Is it comparable with 8.0.1 ROMs found in the Santoni section?.
4) I know for Santoni we should use the type A Arm64 with GAPPS version. I am currently on LOS 15.1 Treble and already have the redwolf recovery.
How could i install this ROM/GSI in my device?.
Thanks for your help!.
Click to expand...
Click to collapse
If ur asking about Phh-Treble then
1. Yes it's stable for daily use, I myself used it for a long time faced no major problems.
2. I guess volte doesn't work but I don't use it so idk.
3. Battery life was decent, used to get around 7 hrs of normal use and around 5 hrs of heavy use.
4. Yeah so just boot into TWRP, wipe system data cache and install the image, ur good to go.
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
The Marionette said:
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
Click to expand...
Click to collapse
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Tell us how it works out [emoji846]
Skickat från min MI 8 via Tapatalk
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Been wanting to get the 8 se, but I've been waiting to hear if phh-treble and other GSIs work before buying. other than notch problems are there any other major issues? Once P is released and phh-treble is updated to android 9 the notch won't be a problem anymore due to AOSP notch support.
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Can you point me to a guide to run Lineage os or RR on out SE?
I am familiar in flashing custom for many years but i am new to treble and just heard about it.
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Ydraulikos said:
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Click to expand...
Click to collapse
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
marcel112 said:
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
Click to expand...
Click to collapse
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Ydraulikos said:
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Click to expand...
Click to collapse
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
marcel112 said:
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
Click to expand...
Click to collapse
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Does the system detect the notch on lineage?
Ydraulikos said:
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Click to expand...
Click to collapse
i did full wipe,
after that i tried to install image, but as what do i need to flash this?
system image
boot
recovery
vendor image
firmware
persist
splash
logo
etc etc?
i choose system image, but after flash ( was quick ) i get no OS?
edit: so i can flash anyone off this page, as long as i use arm64 Aonly for my Mi 8 SE?
edit 2: got it..
install is real fast, and phone is very quick
after trying treble...
i tried to go back to miui backup..
It boots fine, but i cant get past pin code?
I know 100% its the right code, does it have to do with trying treble?
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
jectsin said:
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
Click to expand...
Click to collapse
Everything works on RR? How is the camera?
_katho_ said:
Everything works on RR? How is the camera?
Click to expand...
Click to collapse
work. but bad quality
jectsin said:
work. but bad quality
Click to expand...
Click to collapse
yes and notch is not detected for me
marcel112 said:
yes and notch is not detected for me
Click to expand...
Click to collapse
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
The Marionette said:
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
Click to expand...
Click to collapse
i know this is not miui forum, but i made twrp backup..
Why cant i unlock after restoring after flashing Treble based roms ?
I tried yesterday 3 trebles and full wiped, and restored nandroid of miui 10.
All looks good, but after boot up, i cant get past pincode( i know its right code 110% )
DISCLAIMER:
1. If you don't know anything about custom ROMs please don't install this ROM.
2. If anything happens to your phone or you brick you're phone after installing this ROM, I will not be responsible for any damage whatsoever to any one.
3. Your phone warranty may be void.
IMPORTANT INFORMATION:
1. NO FEATURE REQUEST: I have strictly followed official way of building lineage os for kenzo and have not touched anything after that. I strongly prefer PURE LINEAGE OS EXPERIENCE. So I will never add or remove any feature for any reason.
2. UPDATE CYCLE: I will update once a month (will update only when monthly security patch updated in lineage repo)
3. MAINTENANCE TIME: I use this ROM as my daily driver in my Kenzo. So until my phone dies out I will continue building this ROM.
4. BUG FIXING: As I am new to custom ROM building, I can fix bugs present in my device only. However if bugs are very common I will try to fix them.
PREREQUISITES:
1. Officially unlocked bootloader.
2. Latest TWRP (3.2.3.0) installed.
FLASHING PROCEDURE:
1. Reboot to recovery
2. PERFORM FACTORY RESET (Please don't flash over official lineage OS, updater error 7 will come)
3. Wipe Cache, System, Dalvik
5. Flash ROM
6. Flash Gapps
7. Reboot system.
UPDATE PROCEDURE : (ONLY IF YOU HAVE THIS ROM PREVIOUS VERSIONS FLASHED)
1. Reboot to Recovery
2. Wipe Dalvik and Cache ONLY
3. Flash ROM
4. Flash Radon Kernel v6.3 (Optional)
5. Reboot
ADD ONS:
1. Gapps: Preferably Pico/Nano (Link: https://opengapps.org/)
2. Official Radon kernel v6.3 for nougat (Link: https://androidfilehost.com/?fid=673956719939817337)
3. Google camera : prefer this one (as it's most stable) https://drive.google.com/file/d/1U6GTbh549VpdSsOvQmIGMUg-qEcByPiF/view?usp=drivesdk
4. Remove AudioFx before installing Dolby Atmos, flash this patch- https://drive.google.com/file/d/1KPjfZ4eHXOJhvjYo_Y6SM28lpKEq8c6Y/view?usp=drivesdk
5. Dolby Atmos (7.1.2) - https://drive.google.com/file/d/1TuAAXh6JSDP_mQqXn3CMRuc5REnRgN99/view?usp=drivesdk
6. Install Greenify (from Play store) and then flash this patch to make it system app without rooting- https://drive.google.com/file/d/1q_sCCur4dgYj-Wre5x-3NRR6X1ypmHKP/view?usp=drivesdk
ROM DOWNLOAD LINK:
09.07.2019 :
https://drive.google.com/file/d/1rJXi-wE_Tw8BJzBJPRY3KvHiy4srA81t/view?usp=drivesdk
BUGS:
No bugs at all. Pure lineage os and rock solid nougat. Best battery life and performance for kenzo.
SOME SOLUTIONS FOR BUG FIXING
Those who are facing bug issue regarding wifi, bluetooth, network etc, I want to suggest that I am personally using this ROM and not found single bug till now. Reason such bugs arise are due to vendor or system files get corrupted or mismatch when flashing some treble ROMs. So following are solutions for the same. They are at various levels and if your problem is fixed DONT MOVE TO NEXT LEVEL.
LEVEL A:
1. Reboot to recovery
2. Wipe Dalvik and Cache
3. Flash ROM again
4. Reboot
LEVEL B:
1. Reboot to recovery
2. Perform COMPLETE WIPE (System, Dalvik, Cache, Format and Factory Reset)
3. Flash ROM
4. Flash Gapps
5. Reboot
LEVEL C:
1. Reboot recovery
2. Perform COMPLETE WIPE (System, Dalvik, Cache, Format and Factory Reset)
3. Flash firmware (LInk: https://drive.google.com/open?id=1EjRO_WhpBY5e2fPuuviRc2Ks52Szc3sO)
4. Flash ROM
5. Flash Gapps
6. Reboot to recovery
CREDITS:
@lineage
@TheStrix
@xda
@google AND INTERNET
Donation: https://drive.google.com/open?id=1racErd31wSUlXUFmhFgOgH-MVwz2Swy_
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Lineage OS
Security Patch level: 5 July 2019
@gitsdb
What about unofficially unlocked device ?
hmu333 said:
@gitsdb
What about unofficially unlocked device ?
Click to expand...
Click to collapse
You can try at your own risk.. I have officially unlocked.. Test it and tell others your experience here..
according to xda rules , you have to provide kernal,device tree and rom source link if I'm not doing any mistake
vatsal_chandan said:
according to xda rules , you have to provide kernal,device tree and rom source link if I'm not doing any mistake
Click to expand...
Click to collapse
OK thanks will update it..
Nice, can you make a deodexed build?
gitsdb said:
OK thanks will update it..
Click to expand...
Click to collapse
Just out of curiosity: why build nougat? Why don't you use lineage OS 13 builds by @gismoZ, for instance? He maintains his rom very well and applies all security patches. Diversity is good (sometimes), so I'm just curious.
how much SOT are you guys getting?
Waaaa just what I wanted after trying ROM with Android Pie. Are there any bugs to report or something?
saikou_ said:
Nice, can you make a deodexed build?
Click to expand...
Click to collapse
Sorry friend, no modification please.. Read my thread..
yoreek said:
Just out of curiosity: why build nougat? Why don't you use lineage OS 13 builds by @gismoZ, for instance? He maintains his rom very well and applies all security patches. Diversity is good (sometimes), so I'm just curious.
Click to expand...
Click to collapse
Nougat gives best camera experience as hal3 is supported. Google camera performance is much better with addition of excellent battery life. I have tested all version of android in kenzo and still think nougat is best for all purpose.
Simoom Sadik said:
how much SOT are you guys getting?
Click to expand...
Click to collapse
With average use approx 7 hours..
TheKerevas said:
Waaaa just what I wanted after trying ROM with Android Pie. Are there any bugs to report or something?
Click to expand...
Click to collapse
No bugs. Pure lineage OS. Rock solid in performance..
gitsdb said:
Sorry friend, no modification please.. Read my thread..
Click to expand...
Click to collapse
Of course i read your thread it's okay, nice rom. I like it
I have some questions:
1. does it work with TWRP 3.1.xx?
2. I am using official lineage 7.1.2 from thestrix, what procedure I should be doing? can I just flash it over?
lineage OS kernel bug still exists.
phone shut down automatically at 39% battery.
after charging it boot up
Is VoLTE working?
I'm waiting for customized LineageOS N.
Does this ROM has stock kernel as radon or do we need to install it separately?
Simoom Sadik said:
lineage OS kernel bug still exists.
phone shut down automatically at 39% battery.
after charging it boot up
Click to expand...
Click to collapse
Is anyone else experiencing this??
Can anyone post their battery usage (app wise & graph)?
Simoom Sadik said:
lineage OS kernel bug still exists.
phone shut down automatically at 39% battery.
after charging it boot up
Click to expand...
Click to collapse
I an using official Radon kernel v6.3 for nougat.. Please use that and report.. I have no issues like that.. Also battery life and performance are much better in this kernel.. If possible use battery profile while installing Radon kernel..
koboi.ngangkang said:
I have some questions:
1. does it work with TWRP 3.1.xx?
2. I am using official lineage 7.1.2 from thestrix, what procedure I should be doing? can I just flash it over?
Click to expand...
Click to collapse
1. It will work
2. No factory reset and than wipe system dalvik and cache.. Than install this ROM..(already mentioned in my thread post)
After spending a couple of weeks searching for LineageOS for the A6 (not A6+), I've discovered that there's very little support for this device. Why is this?
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
nqnxev said:
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
Click to expand...
Click to collapse
So it's not so much as ROMs for the A6 but instead more GSIs for the A6? If I'm understanding correctly
Kimitzuni said:
So it's not so much as ROMs for the A6 but instead more GSIs for the A6? If I'm understanding correctly
Click to expand...
Click to collapse
Maybe not "instead", but they just work:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1. Go to custom recovery (recommended will be OrangeFox R11.0).
2. Wipe partitions: cache, dalvik, data, vendor, system.
3. Choose GSI from link above (I can recommend Lineage R mod but you can try different ones; choose arm32_binder64 vndklite builds), download, extract and flash it as "System Image" through custom recovery.
4. Flash vendor for A6 via custom recovery.
5. Optionally flash any custom kernel for A600X.
6. Reboot to system.
If you want typical OneUI rom then use RadicalQuack or JynxOS.
nqnxev said:
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
Click to expand...
Click to collapse
sorry lineage R mod support for A6+ S605G ?
Getting confused with the different versions for A6 / A6+ etc.
I have an SM-600FN model which I think is A6 (not S or +).
It's currently running stock 10 - is there a good 64bit ROM for this? I was thinking it'd be easy to pick out but it is old... I could only see an Android 6 64bit ROM?
Lothaen said:
Getting confused with the different versions for A6 / A6+ etc.
I have an SM-600FN model which I think is A6 (not S or +).
It's currently running stock 10 - is there a good 64bit ROM for this? I was thinking it'd be easy to pick out but it is old... I could only see an Android 6 64bit ROM?
Click to expand...
Click to collapse
For A600FN pretty stable arm64 rom is RadicalQuack. arm64 GSI is also possibile to run on arm64 vendor, but it's not perfect (unstable).
akbare said:
sorry lineage R mod support for A6+ S605G ?
Click to expand...
Click to collapse
Read this thread:
how downgrade sm-a605fn from android 10 to 9
Hello, I have a Samsung Galaxy A6+ with latest fw installed. (italian version) A605FNXXU7CUD4 The phone is totally useless after the update to android 10, it takes AGES to perform any action, even open the Camera or open a Message. Already...
forum.xda-developers.com
Maybe it will be helpful.
nqnxev said:
Maybe not "instead", but they just work:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1. Go to custom recovery (recommended will be OrangeFox R11.0).
2. Wipe partitions: cache, dalvik, data, vendor, system.
3. Choose GSI from link above (I can recommend Lineage R mod but you can try different ones; choose arm32_binder64 vndklite builds), download, extract and flash it as "System Image" through custom recovery.
4. Flash vendor for A6 via custom recovery.
5. Optionally flash any custom kernel for A600X.
6. Reboot to system.
If you want typical OneUI rom then use RadicalQuack or JynxOS.
Click to expand...
Click to collapse
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
nukicius said:
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
Click to expand...
Click to collapse
never mind. i found a 64 bit vendor on this forum and decided to try it, and now it works.
just to clarify, the arm images werent working either, so its not just working because im using the right architecture
nukicius said:
never mind. i found a 64 bit vendor on this forum and decided to try it, and now it works.
just to clarify, the arm images werent working either, so its not just working because im using the right architecture
Click to expand...
Click to collapse
What steps did you follow?
I'm looking for it too, but to no avail. ALL Ares treble kernels that support 64 bits send me to download mode after flashing them.
nukicius said:
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
Click to expand...
Click to collapse
It brought you to download mode probably just because you used wrong architecture of GSI. Vendor from my previous post is intended for arm32_binder64 (A64 - not arm64) vndklite GSI images.
Viper The Ripper said:
What steps did you follow?
I'm looking for it too, but to no avail. ALL Ares treble kernels that support 64 bits send me to download mode after flashing them.
Click to expand...
Click to collapse
i just used a lineageos 18 gsi image and the treble vendor, but it turns out that while it did get to the boot screen that says lineageos (which gave me tremendous amounts of hope), it would NEVER boot up, so dont do what i did i guess lol
currently, im trying what nqnxev told me, and it should hopefully work
nqnxev said:
It brought you to download mode probably just because you used wrong architecture of GSI. Vendor from my previous post is intended for arm32_binder64 (A64 - not arm64) vndklite GSI images.
Click to expand...
Click to collapse
i got the correct image (lir-v316-220325-a64-bgZ-lite.img) and vendor (A6-Android11-stock-vendor.zip), flashed them with orangefox and its just bootlooping
nukicius said:
i got the correct image (lir-v316-220325-a64-bgZ-lite.img) and vendor (A6-Android11-stock-vendor.zip), flashed them with orangefox and its just bootlooping
Click to expand...
Click to collapse
Did you wipe all needed partitions before that (cache, dalvik, system, vendor, data)?
nqnxev said:
Did you wipe all needed partitions before that (cache, dalvik, system, vendor, data)?
Click to expand...
Click to collapse
of course i did, thats what i always do
Strange. Flash also H-Kernel (as boot image):
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/releases/download/H-V1.0-ENFORCING/H-KERNEL_V1.0_A600X.img
nqnxev said:
Strange. Flash also H-Kernel (as boot image):
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/releases/download/H-V1.0-ENFORCING/H-KERNEL_V1.0_A600X.img
Click to expand...
Click to collapse
it works!!! i did want to use the kernel at first, but i didnt know how i should flash it, thanks for clarifying!
hey, is there also a vendor for android 12? i want to give lineageos 19 a shot, and it doesnt work very well with the android 11 vendor (obviously)
i dont absolutely need it, i can stick with lineageos 18, but i just wanna try it out yk
nukicius said:
hey, is there also a vendor for android 12? i want to give lineageos 19 a shot, and it doesnt work very well with the android 11 vendor (obviously)
i dont absolutely need it, i can stick with lineageos 18, but i just wanna try it out yk
Click to expand...
Click to collapse
Android 12 works fairly well on the same vendor, but flash this recovery at first, because older OrangeFox can stuck while boot with Android 12.
Hello guys can i ask? im using pe gsi rom in this device and i wanna flash project elixir rom, do i need to flash vbmeta (verity disable) sometimes flashing it can cause hard brick help!
elixir actually dont boot on mtk devices. flash crdroid or spark. the second in my opinion is the best ( i have tested via dsu sideloader)
my daily drive is crdroid. is very good, but spark have many cool ui custumizaions that crdroid dont have
wetito said:
elixir actually dont boot on mtk devices. flash crdroid or spark. the second in my opinion is the best ( i have tested via dsu sideloader)
my daily drive is crdroid. is very good, but spark have many cool ui custumizaions that crdroid dont have
Click to expand...
Click to collapse
thank you for your reply ^^