Database Develop

[Q] Help findiing/installin S1Boot Fastboot driver

I have been unable to unlock my bootloader because the driver cannot be found during install.
This has been a problem with a ZL and I realize this is a Z foum but since there is fa rmore people here...
Installing the Sony companion app installed
Zperia ZL
USB Mass Storage Device
SONY Mass Storage USE Device
I tried the procudure for bootloade runloc from the Sony Mobile site and it does installs the drivers but they all end flagged by Windows 7 and 8 as won't start.
Been doing this for 3 days and no luck.
Any help would be highly appreciated.
Thank you,

Q.Entity said:
I have been unable to unlock my bootloader because the driver cannot be found during install.
This has been a problem with a ZL and I realize this is a Z foum but since there is fa rmore people here...
Installing the Sony companion app installed
Zperia ZL
USB Mass Storage Device
SONY Mass Storage USE Device
I tried the procudure for bootloade runloc from the Sony Mobile site and it does installs the drivers but they all end flagged by Windows 7 and 8 as won't start.
Been doing this for 3 days and no luck.
Any help would be highly appreciated.
Thank you,
Click to expand...
Click to collapse
go to registry of windows and delete that registry relates to security of portable device...
*search in the xda forums u can find...

I have a solution for you. Install the driver using the latest flashtool from here HERE
Step 1: Download and install Flashtool
Step 2: Use Flashtool to install driver. You have to navigate to this folder and install driver using Flashtool (see pics below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2: Update the driver and select the driver manually (see pictures below)
Picture below shows that driver is installed
Now you can use fastboot!

shadowboy23 said:
]
Now you can use fastboot!
Click to expand...
Click to collapse
I really, really, really OWE YOU A HUGE THANK YOU!
The thing I was missing was to point to the sa0107.
THANK YOU VERY MUCH!
Q

Q.Entity said:
I really, really, really OWE YOU A HUGE THANK YOU!
The thing I was missing was to point to the sa0107.
THANK YOU VERY MUCH!
Q
Click to expand...
Click to collapse
You're welcome.

Same problem here...
Hi,
I've already done everything as I see in this post, but when I go to "Select your device type from the list below" I don't find the "Sony sa0107" or anything like that...
I've already installed the "Flashtool-drivers.exe" a lot of turns, but still the same... Could you please help me? There is no direct driver to install?
Thanks.

nedbull said:
Hi,
I've already done everything as I see in this post, but when I go to "Select your device type from the list below" I don't find the "Sony sa0107" or anything like that...
I've already installed the "Flashtool-drivers.exe" a lot of turns, but still the same... Could you please help me? There is no direct driver to install?
Thanks.
Click to expand...
Click to collapse
same here. after installation the driver does not pop up

If the sony driver doesnt pop up or the correct device in the list, go into settings, developer menu and enable usb debugging, then load up into fastboot again.

1NFERNO said:
If the sony driver doesnt pop up or the correct device in the list, go into settings, developer menu and enable usb debugging, then load up into fastboot again.
Click to expand...
Click to collapse
Having the same issue here, when I connect in fastboot the device doesn´t pop up in the device manager.
HELP?!

Thank you!! Perfecly working now! My ZL is bootloader unlocked now

what have i done wrong
I followed your step by step but when i select the the phone drivers i want to install it fails to install them what have i done wrong

what have i done wrong
shadowboy23 said:
I have a solution for you. Install the driver using the latest flashtool
Now you can use fastboot!
Click to expand...
Click to collapse
I followed your step by step but when I select the drivers i want to install they fail to install. what have I done wrong and do I fix the problem so I can i use fastboot

I clicked your thanks button shadowboy. After a certain amount of head-scratching your little guide led me on the right path.
Cool.

shadowboy23 said:
I have a solution for you. Install the driver using the latest flashtool from here HERE
Step 1: Download and install Flashtool
Step 2: Use Flashtool to install driver. You have to navigate to this folder and install driver using Flashtool (see pics below)
Step 2: Update the driver and select the driver manually (see pictures below)
Picture below shows that driver is installed
Now you can use fastboot!
Click to expand...
Click to collapse
so much thanks.. it solve my problem. previously I also can't unlock bootloader.
now my Xperia Arc S Lt15i can be unlocked..
ref:
http://forum.xda-developers.com/showthread.php?p=39856834&postcount=3

THANK YOU!!! this worked like a charm!
shadowboy23 said:
I have a solution for you. Install the driver using the latest flashtool from here HERE
Step 1: Download and install Flashtool
Step 2: Use Flashtool to install driver. You have to navigate to this folder and install driver using Flashtool (see pics below)
Step 2: Update the driver and select the driver manually (see pictures below)
Picture below shows that driver is installed
Now you can use fastboot!
Click to expand...
Click to collapse

Cannot find specified path

S1Boot Fastboot Drivers
Firstly i am not able to find this Flash tool from its website.link given on website for downloading flash tool are not working

shadowboy23 said:
I have a solution for you. Install the driver using the latest flashtool from here HERE
Step 1: Download and install Flashtool
Step 2: Use Flashtool to install driver. You have to navigate to this folder and install driver using Flashtool (see pics below)
Step 2: Update the driver and select the driver manually (see pictures below)
Picture below shows that driver is installed
Now you can use fastboot!
Click to expand...
Click to collapse
Oh my god this worked so well !!!!!

shadowboy23 said:
I have a solution for you. Install the driver using the latest flashtool from here HERE
Step 1: Download and install Flashtool
Step 2: Use Flashtool to install driver. You have to navigate to this folder and install driver using Flashtool (see pics below)
Step 2: Update the driver and select the driver manually (see pictures below)
Picture below shows that driver is installed
Now you can use fastboot!
Click to expand...
Click to collapse
greetings!!!
Should i choose SE Xperia Neo etc
for my Neo V?? Because there is no Neo V in that list.
i plan to use this method to install S1 drivers so that i can continue to unlock my bootloader the SONY way, with SDK and stuff.
this s1 fastboot driver stalled my unlocking,
if you have any suggestions on how to unlock boootloader the easy way
thank you

Hi there, I tried updating the drivers with the method you mentioned, but I kept getting this error message. Any idea how to work around it?

[GUIDE]How unbrick your L5 from a softbrick

After my friends ask me so much for me to do this tutorial for the sake of L5, I decide to do.
If you see your L5 does not start the system, it is the LG logo, follow a tutorial below according to your case.
Note that this guide helps only in cases of softbrick. In cases of hardbrick, I recommend you go to a technical assistance.
If your device is in the boot animation forever:
Probably you should have modified the system and is very easy to recover. Just look for the ROM that you were using normally occur before it and reinstall.
If your device is not out of the LG logo and/or not go to recovery:
1 - Download the drivers here and install: http://depositfiles.org/files/8nbpilxsh
2 - Download the stock ROM here: http://lg-phone-firmware.com/index.php?id_mod=12
Download according to your device!
3 - Go to the download mode.
If the baseband is V10, remove the battery and insert it again (don’t turn it on!). Press and hold volume up button and volume down buttons and connect the device to your computer while holding the buttons.
If the baseband is V20, remove the battery and insert it again (don’t turn it on!). Press and hold volume down an connect the device to your computer while holding the buttons.
If it was not for the recovery, the stronger hold buttons! Worked with me
4 - Download the KDZ updater here http://www.unclenet.de/files/KDZ_FW_UPD_EN.7z
The file contains msxml.msi. Install it first before running the KDZ updater
5 - Start the program.
Leave the options as follows:
Type: 3GQCT
Phone Mode: DIAG
KDZ file: navigate to the file location. KDZ downloaded in step 2 and select.
6 - Click on "launch software update".
The process will take a while. No way, do not disconnect the device from your computer!!!
7 - If still not start, go to the recovery and format
To go to the recovery, will depend on the installed ROM. Each ROM is different. I do not know how to enter the recovery of all ROMs.
When you go to the stock recovery, will automatically format.
(Special case) If your screen looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do as if you were standing in the logo of LG. However, in this case, will not appear on the screen written this in download mode.
To go in download mode, you will have to have plenty of patience to get out of this situation.
Try:
Hold the volume up and connect the PC;
Hold the volume down and connect the PC;
Hold the volume down and up at the same time and connect to PC.
You should try one of these at a time and wait about 10 seconds. While the screen does not look like this, keep trying and holding the stronger buttons.
View attachment 3726726
Make sure it is connected. Go on the control panel, Hardware and Sound, Devices and Printers. If not appear, uninstall the drivers in the device manager and reinstall it.
After that, you just have to install the ROM on KDZ updater.

its a softbrick when it comes and its easy thats right,but whats when we have a real hardbrick?
--SIGNATURE--

-CALIBAN666- said:
its a softbrick when it comes and its easy thats right,but whats when we have a real hardbrick?
--SIGNATURE--
Click to expand...
Click to collapse
I don't know

Amazing man, I appreciate your work

Jonas Cardoso said:
Amazing man, I appreciate your work
Click to expand...
Click to collapse
thanks

Hard brick is when your device won't react to any of your actions.

n0b0dy666 said:
Hard brick is when your device won't react to any of your actions.
Click to expand...
Click to collapse
So all I said is to recover from a soft brick?

Antonio Almeida Filho said:
So all I said is to recover from a soft brick?
Click to expand...
Click to collapse
Yes.
Soft brick; bootloop etc.
Hard brick; phone wont turn on & can not access recovery/download mode.

rhystagram said:
Yes.
Soft brick; bootloop etc.
Hard brick; phone wont turn on & can not access recovery/download mode.
Click to expand...
Click to collapse
Therefore, I have nothing to say about hardbrick. In this case, I would recommend just taking the phone into a technical assistance.

Antonio Almeida Filho said:
Therefore, I have nothing to say about hardbrick. In this case, I would recommend just taking the phone into a technical assistance.
Click to expand...
Click to collapse
Btw... How did this thread ended in XDA Home Page??:silly:

Hardbrick is relatively easy too (just one temporary pull down on eMMC data line, then emergency downloader from SoC is available over usb), though for writing guide/testing software i would need actual genuine hardbrick (mobo of l7 or enough of l5)
But even if i write guide, you will still need to have full eMMC backup, any other way while not impossible, violates xda rules. Otherwise you will have no IMEI (though that state could be still useful)

Unfortunately this sock doesn't support QDL 9008 from what I know. The title is just misleading. There is no hard-brick here.

It does since forever:
MSM7k ARMv7 - over USB
any before - over UART

Guys, I never said that this tutorial is about hardbrick. You probably should have seen it http://www.xda-developers.com/xda-external-link/unbrick-lg-optimus-l5-from-hard-brick/ . I think you should discuss it there, with the guy who spoke that it is a hardbrick guide.

neutrondev said:
Unfortunately this sock doesn't support QDL 9008 from what I know. The title is just misleading. There is no hard-brick here.
Click to expand...
Click to collapse
I DO NOT told at any time that was hardbrick. I'm going for the title which is softbrick. This so good?!

Antonio Almeida Filho said:
I DO NOT told at any time that was hardbrick. I'm going for the title which is softbrick. This so good?!
Click to expand...
Click to collapse
True. My bad mate.

Antonio Almeida Filho said:
Guys, I never said that this tutorial is about hardbrick. You probably should have seen it http://www.xda-developers.com/xda-external-link/unbrick-lg-optimus-l5-from-hard-brick/ . I think you should discuss it there, with the guy who spoke that it is a hardbrick guide.
Click to expand...
Click to collapse
Apologies for the inconvenience caused. I should try and work with more coffee. It was not my intention to cause such harm. The post has been removed.

a.cid said:
Apologies for the inconvenience caused. I should try and work with more coffee. It was not my intention to cause such harm. The post has been removed.
Click to expand...
Click to collapse
Do not get this message as irony, but thank you for that.

LG E 610 Softbrick tried everything MPT Driver fails to load
hi,
i have an LG Optimus L5 (LG-E610) here, it used to have a Stock Android 4.0.3 of nov 06-2012 on it and i tried to put a custom 4.4.4 ROM on it. i had root, Philz Recovery installed and flashed with it: 20 baseband, ROM, gapps, in that order. after it was finished-> reboot system. but the fon would not boot properly and show my a dizzy screeen. after i installed LGMobileDriver_WHQL_Ver_4.2.0.exe and tried flashing V10B_00.kdz with the KDZ_FW_UPD_EN.7z tool. ti said "phone not found" no matter in wich way i used it. after this the fon would not be properly recognised by the win7 x64 pc anymore. the "Android Net MTP device" driver fails to install. some mpt driver used to work before.
after this i also worked with the lg mobile tool und the lg 3.8 mobile driver. uninstalled drivers, used other pcs, virtual oss, lg pc suite. i tried every possible combination of push buttons (i believe) and did with and without battery in the fon. the problem remains. MTP device driver fails to install.
WHAT TO DO?

i have an old device, i cant access the download mode or recovery mode just a white screen, this happen after i was trying to flash a custom recovery (twrp). any have an idea? i just need to enter the download mode, and the kdz wont recognize the device

Fake Android 10" Phone TS-M704A -ZML10

Hi guys I am new to Android as you can see otherwise I wouldn't have touched one of these fake tablets at all , but the price looked good and it was for a Christmas gift to a child who would most likely drop it on the first day so took a chance. BIG mistake it wouldnt accept Family link or any decent Child security apps so it was basically useless , I watched a video on how to upgrade it and to check what system was installed it was supposed to be Android 9 it was in fact KitKat 4.4.2 so I followed the video ( to the letter ) and now it only loops the android logo . I can't find any firmware for it and am not even sure what manufacturer has the cheek to put their or it's brand to it , but I have persevered and not yet thrown it against the wall ( but i'm frikin close to it ) so please can anyone point me in the right direction to unbrick this Marvel of a Chinese Puzzle ( honestly it makes a Rubik Cube look easy ) I would be eternally grateful as would my wife who didnt know I knew so many swear words as I am 68 she should have known I had a few up my sleave lol so looking for a MTK6582 scatter file and firmware for a TS-M704A (10" model ) board marked as ZLM10 Thanks guys .

hi, i am not much of a expert but it seems you have messed up something wrong in the tablet.
i would need some information about tablet to help you.
1) is it still on stock rom?
2) can you go to recovery mode just by pressing power button simultaneously with either volume up or volume down button
3) it any thing shown in pc (windows) inside control panel when tablet is connected with usb.

Hi Bhanu no nothing visible on tablet no access to any system , when conected to PC MTK port shows on com15 but the tablet does not show in My Pc as a mass storage or anything. If I plug in aniother tablet I have it shows up on my pc , but with this one nothing at all . The board is a ZL10-MB V3.2 Arm cortex 7 cpu and I think its an MTK MT6582 but not sure but that is what most specs say for this tablet . When SP-Flash plugged in it says no partion and times out , only firmware I have ben able to find fot it off Leaktite is corrupted plus the logo is no longer looping it's a brick .. Regards Clive

clives40 said:
Hi Bhanu no nothing visible on tablet no access to any system , when conected to PC MTK port shows on com15 but the tablet does not show in My Pc as a mass storage or anything. If I plug in aniother tablet I have it shows up on my pc , but with this one nothing at all . The board is a ZL10-MB V3.2 Arm cortex 7 cpu and I think its an MTK MT6582 but not sure but that is what most specs say for this tablet . When SP-Flash plugged in it says no partion and times out , only firmware I have ben able to find fot it off Leaktite is corrupted plus the logo is no longer looping it's a brick .. Regards Clive
Click to expand...
Click to collapse
Hi, clives good news after searching for hours on russian forms i found your tables frimware just made for your tablet so
first thing to do is install mtk device drivers/ flash tool driver in to your computer
secondly download SP_Flash_Tool_v5.1636_Win i recommend this version because it works without error
thirdly download the frimware of your phone from link https://androidhost.ru/2CKf
fourthly remove battery to make sure phone is switch of
finaly connect good usb cable to tablet and loadup sp flash tool flash frimware and abra ka dabra your tablet is working again
and ya be happy.

to add extra help here are website for drives
1) mtk drivers
Download MTK USB All Drivers for Windows (Official MediaTek Drivers)
Download the latest version of MTK USB All Drivers (MediaTek Driver) to connect any MediaTek Device with the Windows Computer.
androidmtk.com
note:- if you are using windows 10 then there would be problem with installing drivers as these are not updated for it so what you need to do is
go to settings in windows 10
and go to update and security
then select recovery tab
then click advanced restart option. as seen in image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then you pc will restart and when start it will show advanced recovery option where you need to select
then select startup settings as seen in image
then select option 7 disable driver signature enforcement
then proceed to start windows
the process is bit lengthy but believe me it worth it .
after this you need to extract driver pack downloaded from link https://androidmtk.com/download-mtk-usb-all-drivers
then open folder vcom drivers
you will see a file name mtk_sp_usb2ser.inf just right click on it to install it manually
after all this just download spflash tool from link bellow do not use any other version
SP Flash Tool v5.1636 for Windows - MediaTek Flash Tool
Download SP Flash Tool v5.1636 to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
after it just download the frimware from the link
https://androidhost.ru/2CKf
extract it and use spflash tool to flash the rom.
if it work do not say thanks just do some thing good for any other person who need help.

Bhanu8082 said:
to add extra help here are website for drives
1) mtk drivers
Download MTK USB All Drivers for Windows (Official MediaTek Drivers)
Download the latest version of MTK USB All Drivers (MediaTek Driver) to connect any MediaTek Device with the Windows Computer.
androidmtk.com
note:- if you are using windows 10 then there would be problem with installing drivers as these are not updated for it so what you need to do is
go to settings in windows 10
and go to update and security
then select recovery tab
then click advanced restart option. as seen in image
View attachment 5199127
then you pc will restart and when start it will show advanced recovery option where you need to select
View attachment 5199129
then select startup settings as seen in image
View attachment 5199133
then select option 7 disable driver signature enforcement
then proceed to start windows
the process is bit lengthy but believe me it worth it .
after this you need to extract driver pack downloaded from link https://androidmtk.com/download-mtk-usb-all-drivers
then open folder vcom drivers
you will see a file name mtk_sp_usb2ser.inf just right click on it to install it manually
after all this just download spflash tool from link bellow do not use any other version
SP Flash Tool v5.1636 for Windows - MediaTek Flash Tool
Download SP Flash Tool v5.1636 to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
after it just download the frimware from the link
https://androidhost.ru/2CKf
extract it and use spflash tool to flash the rom.
if it work do not say thanks just do some thing good for any other person who need help.
Click to expand...
Click to collapse
Hi Bhanu no luck I'm afraid the sp comes back with the message time out , computer is detecting and stable so now I'm completely lost. but thanks for trying to help regards Clive.

are you sure giving up so early ????
if decided to try once again, check if pc detects phone or not
how?
simple,
connect your phone and open control panel go to device manager and see if there is any vcom driver connected or not

Hi Bhanu yes the tablet does show up in the device manager and isn't jumping in and out so no interupt to connection , it just keeps timing out when plugged back in to pc on download from Flashtool. I am thinking maybe the sd is locked or damaged I don't know , been reading up a bit on these and many have had the same problems with this model just basically a load of junk lol but if you have any ideas I will more than gladly try them .regards Clive

yes you are right when i searched for your phone i found that flash drive is missing in it so tablet will not work now.
but you can try resetting it through recovery if not then its just useless.

Yeah but the only way you can do that with these phones/tablet/ dung pile lol is to have ad debugging which without a system in it you're screwed ? so I think I'm going to use it as a Frisbee ha ha . whatever you do do not buy any tablets from a company called well 4 shopping UK . Not only are they not in the UK so delivery times are ridiculous but they lie through their teeth , I suppose my own fault for buying from ebay lol thanks anyway Bhana
your help was much appreciated regards Clive PS if I ever do crack it I will let you know ..
​

Question [CLOSED] Xiaomi 12 Pro Completely Bricked/Dead

Hello, a friend brought this device complete dead, he bricked the phone after attempting to flash global rom, i can't put the device to edl and the computer doesn't detect the device, on charger is drawing power to charge the battery. Is there something different with these snapdragon 8 gen 1 chips? What i'm missing? Warranty or Xiaomi Service Center isn't an option.

The only info in chinese for 12 Pro is this - http://m.shuajibao.com/course/hongminote5a_gao/24583.html
In english didn't find anything

How to Put a Qualcomm Phone into EDL Mode
Qualcomm into EDL - Utilize EDL in Investigations | Magnet Forensics
Emergency Download (EDL) mode is a Qualcomm feature that can allow you to recover data from a device and perform tasks like unbricking or flashing the device. On supported devices, Magnet AXIOM can use EDL to extract a full image.
www.magnetforensics.com
Can this help?

Just for the record, I found the testing points of the Xiaomi 12 PRO, the mobile was set in EDL mode and the Global rom was installed with success.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nice, compliments!

Are you unlocked phone bootloader?
IF u unlocked it , can u enter fastboot mode by pressing the volume down and power keys
you can go to fastboot and flash official rom to save it .

Liangliang said:
Are you unlocked phone bootloader?
IF u unlocked it , can u enter fastboot mode by pressing the volume down and power keys
you can go to fastboot and flash official rom to save it .
Click to expand...
Click to collapse
The bootloader was unlocked, in order to install the ROM from xiaomi.eu. The mobile was completely dead, no usb, no fastboot

maddoctorgr said:
The bootloader was unlocked, in order to install the ROM from xiaomi.eu. The mobile was completely dead, no usb, no fastboot
Click to expand...
Click to collapse
OH, It's very unlucky. U must enter 9008port to flash it, unluckly I don't know how to enter it.It is recommended that u contact Xiaomi after-sales service

Liangliang said:
OH, It's very unlucky. U must enter 9008port to flash it, unluckly I don't know how to enter it.It is recommended that u contact Xiaomi after-sales service
Click to expand...
Click to collapse
I have written above the mobile is fixed

Hi! Do you know what did they wrong to brick the device?

bandik5 said:
Hi! Do you know what did they wrong to brick the device?
Click to expand...
Click to collapse
I'm now with the ROM from xiaomi.eu
So, what went wrong the first time? I saw this time that despite doing the same things, after the script finished everything, it took some secs to see the MIUI logo, something that never appeared the first time. Also, because I used help this time to be sure that I wont have the same problems as first time, the technician installed me 2 drivers that where missing and the mobile wasn't recognized correctly. I have windows 11. So I guess check drivers, connect original cable directly on pc and cross your fingers that all will work ok.

Just to let you know guys, when the phone is in EDL mode, there's no indication about it, no logo etc. You just have to turn on your phone and it will automatically enter EDL mode if you had a soft brick. To fix it you need to connect your smartphone to the PC and use an EDL flashing enabled account on Mi Flash, that's all. The problem with the OP was that he probably was missing the right drivers and the phone wasn't getting recognised

maddoctorgr said:
12 Pro 的唯一中文信息是 - http://m.shuajibao.com/course/hongminote5a_gao/24583.html
英文没找到
Click to expand...
Click to collapse
啥用没有

can some one please help me to unbrick my xiaomi 12 pro, its completely bricked not charging when connected to the charger and not getting detected in the device manager. i installed all drivers like qualcomm hs 9008 driver, adb fastboot drivers and also drivers from xiaomi. its not getting detected in device manager

@maddoctorgr can you send me the location of test points. I am in similar situation

maheshkondraju said:
can some one please help me to unbrick my xiaomi 12 pro, its completely bricked not charging when connected to the charger and not getting detected in the device manager. i installed all drivers like qualcomm hs 9008 driver, adb fastboot drivers and also drivers from xiaomi. its not getting detected in device manager
Click to expand...
Click to collapse
Have you fixed it yet buddy? Any tips for me ?

karkiankit said:
Have you fixed it yet buddy? Any tips for me ?
Click to expand...
Click to collapse
got a replacement, just received it today.

maheshkondraju said:
can some one please help me to unbrick my xiaomi 12 pro, its completely bricked not charging when connected to the charger and not getting detected in the device manager. i installed all drivers like qualcomm hs 9008 driver, adb fastboot drivers and also drivers from xiaomi. its not getting detected in device manager
Click to expand...
Click to collapse
You must have purchased via amazon right? Can i get your telegram or whatsapp id ?

karkiankit said:
You must have purchased via amazon right? Can i get your telegram or whatsapp id ?
Click to expand...
Click to collapse
no from mi.com

karkiankit said:
@maddoctorgr can you send me the location of test points. I am in similar situation
Click to expand...
Click to collapse
The mobile cannot enter fastboot and is not recognized by pc? Test points are reached only after opening the mobile

Question Bootloop redmi note 10, Don't get into edl mode

Hallo,
My phone has been in a bootloop for 3 weeks. Bootloader is closed and debugging is not enabled. I'm able to get into fastboot mode and join mode with miassistant. I tried to install the latest recovery firmware via miflash pro, but I always get an error message that the update could not be verified. To rule out that I didn't have the right drivers installed, I tried it with another working redmi note 10 pro, it works and the update is verified. I have tried with xiaomitoolv2, there is also an error message that no suitable recovery can be found. So I wanted to go into edl mode and flash through an authenticated account using Telegram. But I can't get into edl mode. I opened the back and short-circuited the test points, then connected the battery and then to the PC. Windwos only recognizes a "Linux file store gadget USB device" but not Qualcomm. Does it need other drivers than for miflash pro? Or can I assume that the drivers are sufficient because I could flash the cell phone with the test? Does it indicate a defective CPU that I cannot reach the edl mode?
Another question is if it's normal that after removing the midframe I can't turn on the phone with the buttons on the powervolume flex. It only works if I also plug in the power button, but then it doesn't really work well either, only hesitantly or not at all. As soon as the middle frame is back on, all the buttons work very well. Is this normal behavior?

Is
Oliena said:
Hallo,
My phone has been in a bootloop for 3 weeks. Bootloader is closed and debugging is not enabled. I'm able to get into fastboot mode and join mode with miassistant. I tried to install the latest recovery firmware via miflash pro, but I always get an error message that the update could not be verified. To rule out that I didn't have the right drivers installed, I tried it with another working redmi note 10 pro, it works and the update is verified. I have tried with xiaomitoolv2, there is also an error message that no suitable recovery can be found. So I wanted to go into edl mode and flash through an authenticated account using Telegram. But I can't get into edl mode. I opened the back and short-circuited the test points, then connected the battery and then to the PC. Windwos only recognizes a "Linux file store gadget USB device" but not Qualcomm. Does it need other drivers than for miflash pro? Or can I assume that the drivers are sufficient because I could flash the cell phone with the test? Does it indicate a defective CPU that I cannot reach the edl mode?
Another question is if it's normal that after removing the midframe I can't turn on the phone with the buttons on the powervolume flex. It only works if I also plug in the power button, but then it doesn't really work well either, only hesitantly or not at all. As soon as the middle frame is back on, all the buttons work very well. Is this normal behavior?
Click to expand...
Click to collapse
Is your device code named mojito? If it is Mojito it shall show up as Qualcomm Device in device manager given that you have all the drivers installed.
I have a tool which can flash your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

No, the device code is "sweet". No Qualcomm device is displayed in the device manager when I try edl. So I guess I'm not in edl mode. What is this tool that you have, In which mode does the cell phone have to be for the tool?

Oliena said:
No, the device code is "sweet". No Qualcomm device is displayed in the device manager when I try edl. So I guess I'm not in edl mode. What is this tool that you have, In which mode does the cell phone have to be for the tool?
Click to expand...
Click to collapse
Your phone must be in Qualcomm HS USB mode.
Fo your phone you will have to use Avatar Auth tool but this is a paid software and due to XDA policies I cannot provide much information about it.

Ok I understand. I would be willing to use a paid tool or pay someone for an auth account via telegram. But my problem is that I can't get into Qualcomm hs USB mode. Which is why I think it might be a hardware error.

Oliena said:
Ok I understand. I would be willing to use a paid tool or pay someone for an auth account via telegram. But my problem is that I can't get into Qualcomm hs USB mode. Which is why I think it might be a hardware error.
Click to expand...
Click to collapse
I can help you get it into Qualcomm mode.

mvikrant97 said:
I can help you get it into Qualcomm mode.
Click to expand...
Click to collapse
Your phone's EDL point. Please make sure you have Qualcomm drivers installed and also your computer drivers are updated.