Database Develop

Note 9 T-mobile possible to get rid of bootlogo?

Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer

LennartL said:
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
Click to expand...
Click to collapse
You can flash it using modded or patched ODIN to the U1 non-carrier firmware to get rid of the T-Mobile boot animation. It will also remove the T-Mobile video calling dialer though but WiFi Calling will still work.

What he said^^^ flash the U1 firmware. Note your device will be wiped.
Sent from my SM-N960F using Tapatalk

Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1

LennartL said:
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
Click to expand...
Click to collapse
Do not use the one labeled TMB U1. That firmware isn't official and could potentially break OTA's. You want to use the U1 XAA with the same version or newer bootloader than what your device currently has. The the first character of the last five characters of the build number contains your bootloader version. I don't believe the Note 9 has a v2 bootloader yet, but I have only really followed ATT U firmware, U1 firmware, and TMB U firmware. When you flash, do not use the HOME_CSC! remember your device will be wiped and factor reset so back up what you want before starting.

I'm running the TMB U1 firmware. No bloat or boot screens and I get OTAs around the same time as the U t mobile devices. I honestly dont see a real difference from the XAA u1 vs the TMB U1 firmware to be honest

Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?

LennartL said:
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
Click to expand...
Click to collapse
The non-branded firmware is the U1. The reason the modded or patched ODIN is needed is to skip the check that you are flashing the same carrier firmware. The hardware for the US and Canadian models are exactly the same. The firmware on Sansung's page isn't meant for flashing in ODIN.
Although I have only seen one user experience issues with the TMB U1, which for some reason, gave him a modded software warning when they tried to check for updates. I would stick to using the actual non-carrier specific firmware, which has T-Mobile's WiFi Calling and still has band 71 enabled.

ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?

LennartL said:
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
Click to expand...
Click to collapse
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.

jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?

LennartL said:
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
Click to expand...
Click to collapse
That's correct! The U1 non-carrier firmware is like a stepping stone, If you want to move from one U firmware to one from a different carrier, you need to flash to U1 first and always make sure you never use the HOME_CSC. The HOME_CSC doesn't wipe the device, which can cause a number of issues when converting. Being on the U1 though, makes it very easy to go back to any U firmware because you are already at the point where you could just straight flash to any U or W firmware as long as the bootloader version is the same or newer than what your device has at that time.

ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?

LennartL said:
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
Click to expand...
Click to collapse
The HOME_CSC prevents wiping while flashing. If you skip the wiping part, you risk having no data, no potential cellular connectivity, no different unlocked bands for the firmware you are flashing to, etc. You pretty much put yourself in a position where you have to flash again, but actually use the other CSC to ensure your device works properly.

Any unlocked USA note 9s willing to upload there modem files somewhere wanna try and make a sim unlock

Help on Flashing Tmobile firmware on Unlocked Note 9
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!

lguti46 said:
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
Click to expand...
Click to collapse
Yes you can. Use ODIN to flash the T-Mobile firmware. It's that simple. You don't need an unlocked bootloader or root. No it won't trigger Knox.
If you need detailed instructions, they have been posted in some of the firmware threads here, o you can go to the Note 8 forums and read through the carrier switching thread. Just follow the steps for flashing carrier firmware. The steps are all the same, you just make sure you're using the right firmware for your device.

Thank you so much! I was able to successfully flash to T-Mobile using the forum threads.

Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?

LennartL said:
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
Click to expand...
Click to collapse
That's because U1 XAA is on ARJ9. There won't be a U1 Firmware with an ARH6 build number.

Accidentally bought G970U instead of G970U1

As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?

redsmith said:
As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?
Click to expand...
Click to collapse
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?

Charkatak said:
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?
Click to expand...
Click to collapse
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?

redsmith said:
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?
Click to expand...
Click to collapse
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817

Charkatak said:
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/gal...rrier-t3625817
Click to expand...
Click to collapse
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!

redsmith said:
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!
Click to expand...
Click to collapse
I corrected the link in case you need it.
To answer OTA question: I had unlocked U1 model of S8 and when I flashed it with T-Mobile firmware then my phone got OTA from T-Mobile when they release it. I assume if you have carrier branded phone and flash it with U1(XAA) firmware then most likely your phone will get updates when Samsung releases them. You won't have to use Odin every time there is an update if you flash properly. Also, it would be advisable to flash using CSC file instead of HOME CSC, so your phone would be wiped. It is because you change firmware and want your software to be fully compatible. After flashing and you check your phone's software update and see that is shows "not compatible or something similar", then I would just suggest you to do "reset"(factory reset) from setting and after you setup your phone, that message will disappear. Also don't do any software update before flashing as you phone may get a fresher firmware than the one you might be trying to flash.
1) Check your current phone firmware
2) Download firmware you want, but if you can, get the firmware that is a previous one than the current one, so you will check to see how your phone gets OTAs
3) Flash using Odin
4) After that disconnect and let the phone do its thing
5) Set it up and check to see if software update section in settings don't give you any messages such as the one I outlined above, if it does, just factory reset the phone

Trouble updating Galaxy Note 9

Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.

mtrackerbeyond said:
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
Click to expand...
Click to collapse
to your last point, at&t phones are notoriously bad at updating
factory unlocked phones will remain forever unlocked and phones unlocked that are bespoke to a specific carrier will also remain unlocked even with Odin flashes providing that the method employed to unlock it was legitimate. Some unlock methods employ root and only trick the phone into thinking its unlocked. Well, once you remove root, and thusly the trick, the unlock is gone. I have ran across rare examples where the person swore up and down that they unlocked their phone with a legit unlock code and that it relocked to a carrier once the sim was inserted and initial programming completed, but i dunno. Sounds weird to me, but every person who said this also said that the phone locked to a carrier other than the one it came from originally. Take that for what its worth, but i still mostly stand by the first couple lines of this section of my diatribe
If you want the at&t crap gone, get the N960U1 firmware and flash it in Odin. You will need the modified version of Odin to flash it so it can ignore the 255 errors the phone throws up from flashing firmware for a carrier (or, in this case, no carrier) on to a phone that it wasnt originally designated (not designed) for
go to sammobile.com/firmwares, get the info for the firmware you want to d/l, get the Frija tool or Samfirm and download the firmware thru one of those as theyre literally 5x faster and flash it

mtrackerbeyond said:
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
Click to expand...
Click to collapse
Hi, my phone is a Note 9 ATT factory unlocked.
Below is the link for my post
I've updated my phone using the link , and still unlocked and working Ok.
I hope it can help you .
https://www.google.com/amp/s/forum....note-9-att-rom-update-sept-2019-t3979303/amp/

Questions about flashing unlocked firmware to my G973U

Please excuse any mistakes I make as this was my first time flashing firmware. So anyway, I have a Verizon S10. I got tired of Verizon’s bloat and all the missing stock features so I flashed the Unlocked Firmware from Sammobile. As I had no prior experience, I did research and came to download the latest U1 firmware with the XAA CSC. I know there’s a U1 version with the Verizon CSC, but I decided to use the XAA version because I knew it was universal. Now I could be totally wrong on this, but isn’t at least one of the three CSCs supposed to be XAA? All mine are still VZW, just like it was on the original carrier fw. I even tried taking the Sim out and reflashing, but no luck. The phone is still locked to Verizon, could that be why? The problem is, can I still get OTA updates? How can I stay on unlocked firmware and get them? Did I mess up and should’ve flashed the VZW U1 fw? Is this fw all vzw cscs too and I just messed up somewhere else? I have the pda of the xaa version with the csc of the vzw version. I don’t know what to do. I would’ve loved to install the one ui beta now that I’m in unlocked fw, but I can’t because my active csc is version, who blocked it

cggamer1 said:
Please excuse any mistakes I make as this was my first time flashing firmware. So anyway, I have a Verizon S10. I got tired of Verizon’s bloat and all the missing stock features so I flashed the Unlocked Firmware from Sammobile. As I had no prior experience, I did research and came to download the latest U1 firmware with the XAA CSC. I know there’s a U1 version with the Verizon CSC, but I decided to use the XAA version because I knew it was universal. Now I could be totally wrong on this, but isn’t at least one of the three CSCs supposed to be XAA? All mine are still VZW, just like it was on the original carrier fw. I even tried taking the Sim out and reflashing, but no luck. The phone is still locked to Verizon, could that be why? The problem is, can I still get OTA updates? How can I stay on unlocked firmware and get them? Did I mess up and should’ve flashed the VZW U1 fw? Is this fw all vzw cscs too and I just messed up somewhere else? I have the pda of the xaa version with the csc of the vzw version. I don’t know what to do. I would’ve loved to install the one ui beta now that I’m in unlocked fw, but I can’t because my active csc is version, who blocked it
Click to expand...
Click to collapse
Some answers to your questions:
1. I don't know, it should flash a data partition that's for the unlocked firmware. I remember reading that somewhere here in the forums.
2. I think Verizon phones are more locked than the others, but I could be wrong.
3. You can get the OTA updates on the unlocked firmware, you just have to have a SIM inserted.
4. You may have, do a factory reset in recovery and try flashing this with that special version of ODIN:
https://www.androidfilehost.com/?fid=1899786940962609128
5. U and U1 firmware are different, sort of. U is carrier and U1 is unlocked.

Flashing firmware from a different region

Hi all, I'm new to modding in general so there's many things I don't quite understand, hoping somebody can help.
I bought an S10 from a site which was supposed to just send me a refurbed (italian) S10, instead they sent me the US version, (G973U) and I believe it is carrier locked since it's stuck with Android 9 and doesn't find any update.
I have tried searching to no avail what I should flash to simply unbrand it, and allow it to receive OTA updates without tripping Knox.
The build version is the following: PPR1.180610.011.G973USQU2ASGC and the CRC is XAA/XAA/ATT
Thanks in advance.

You shall call them.

Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.

CSC (not CRC).
XAA is a multi-region USA ROM, so I don't think it will change over properly for you in Italy. There are threads here for how you reflash a different ROM. The one I used for my S10+ was this one: https://forum.xda-developers.com/t/...e-links-and-flashing-discussion-here.3905897/ but I am sure there is one like that for your S10 non-plus... find it, follow the instructions, and you should be all set.

Thanks! I'm a newbie, what does it mean it wouldn't change properly? No OTAs? Tripping KNOX?
I have found this which seems to be the equivalent of the link you posted.
So, I should flash the U1 version right? However I see only a file "SAU - 1 - ....", and my build number doesn't end in that, furthermore I don't know which bootloader version I'm at.

lrzfc said:
Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.
Click to expand...
Click to collapse
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.

FardinIslam said:
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.
Click to expand...
Click to collapse
No problem. I'm aware of the mode I have to enter to flash, as above I'm trying to figure out which stock rom I should flash to avoid tripping knox, and to receive OTAs. What won't work seamlessly?

Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom

Watch this video

lrzfc said:
Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom
Click to expand...
Click to collapse
Hello, I'm in more or less same situation. When you flashed, which files did you use? All of them or just the AP_*** file?

Never mind. Flashed it anyway, now I don't see the AT&T startup screen anymore which is promising. Firmware version is now Android 11 (SM-G973U1 and not SM-G973U) on XAA CSC. Will see if I get any firmware updates later.