Related
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.
I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm
I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt
If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .
and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then
Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?
Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
try booting recovery from fastboot "fastboot boot *twrp image*.img"
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgzWith miflash-20220218 in edl mode .
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Good day everybody
Straight to the point. I tried to flash a different rom, EU version of MI6X MIUI on my device and suddenly, at the reboot after the flash, the screen remained black.
Strange thing is that the device is still detected through usb on my pc, even on MiFlash its detected. But i cannot do anything, tried flashing a rom with Miflash but i get Catastrophic Error!
Please someone help me i dont want to change this phone!
Thank you so much!
Edit: after researching, i seem to be stuck in a useless EDL mode. My pc can detect the phone (Qualcomm 9008), but MiFlash cannot flash anything. The flash starts and based on the version of MiFlash im using gets stuck after a couple of seconds. for a different reason (Authentication on 2018 version, Send configure command on 2015 version) I dont understand. Please help
Marduk666 said:
Good day everybody
Straight to the point. I tried to flash a different rom, EU version of MI6X MIUI on my device and suddenly, at the reboot after the flash, the screen remained black.
Strange thing is that the device is still detected through usb on my pc, even on MiFlash its detected. But i cannot do anything, tried flashing a rom with Miflash but i get Catastrophic Error!
Please someone help me i dont want to change this phone!
Thank you so much!
Edit: after researching, i seem to be stuck in a useless EDL mode. My pc can detect the phone (Qualcomm 9008), but MiFlash cannot flash anything. The flash starts and based on the version of MiFlash im using gets stuck after a couple of seconds. for a different reason (Authentication on 2018 version, Send configure command on 2015 version) I dont understand. Please help
Click to expand...
Click to collapse
if it is in EDL you are in luck .
follow this guide :
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-unbrick-arb-edl-t3846426
KevMetal said:
if it is in EDL you are in luck .
follow this guide :
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-unbrick-arb-edl-t3846426
Click to expand...
Click to collapse
Hey thanks!
But i already tried this, with no luck. Miflash doesnt allow me to flash anything. Can you maybe suggest why?
Marduk666 said:
Hey thanks!
But i already tried this, with no luck. Miflash doesnt allow me to flash anything. Can you maybe suggest why?
Click to expand...
Click to collapse
i can only tell if you can tell me exactly your error
KevMetal said:
i can only tell if you can tell me exactly your error
Click to expand...
Click to collapse
On MiFlash 2018 for example, i get the Not Authorized to Download error.
Maybe the fact that i tried to flash a global rom is the problem?
Try to install twrp , and flash hex kernel , and them flash EU rom, if is not possible , try to flash vía TEST POINT
Enriquecalong said:
Try to install twrp , and flash hex kernel , and them flash EU rom, if is not possible , try to flash vía TEST POINT
Click to expand...
Click to collapse
That is the point. Its already in EDL mode, and my pc sees the phone. But Miflash doesnt allow me to flash because of authorization.
Marduk666 said:
On MiFlash 2018 for example, i get the Not Authorized to Download error.
Maybe the fact that i tried to flash a global rom is the problem?
Click to expand...
Click to collapse
that error is because of your ARB .. DOwnload the latest rom with highest ARB level ...like explained in the guide
if you have latest rom with highest ARB level but still get errors start trying all different versions of Miflash ..I tried three or four before I found one which worked ..
KevMetal said:
that error is because of your ARB .. DOwnload the latest rom with highest ARB level ...like explained in the guide
if you have latest rom with highest ARB level but still get errors start trying all different versions of Miflash ..I tried three or four before I found one which worked ..
Click to expand...
Click to collapse
So i tried again with this release V10.3.6.0.PDCCNXM_20190816.0000.00_9.0_cn, with multiple different miflash builds, same error. Tried patching the rom and not. Nothing worked, same edl authentication problem.
I believe, pretty sure, this is the build that bricked the phone: xiaomi.eu_multi_MI6X_8.6.28_v10-8.1
Maybe it can help you understand better? Also, how do i determine which is the highest ARB build available?
Thank you so much for the help!
KevMetal said:
that error is because of your ARB .. DOwnload the latest rom with highest ARB level ...like explained in the guide
if you have latest rom with highest ARB level but still get errors start trying all different versions of Miflash ..I tried three or four before I found one which worked ..
Click to expand...
Click to collapse
Found out how to get the ARB level, but still, i think i stuck on ARB4 and even if i flash an ARB4 rom, which i tried, i just get the same error. Really dont now what to do.
Marduk666 said:
Found out how to get the ARB level, but still, i think i stuck on ARB4 and even if i flash an ARB4 rom, which i tried, i just get the same error. Really dont now what to do.
Click to expand...
Click to collapse
you need to download and try many different versions of Miflash
---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------
Marduk666 said:
So i tried again with this release V10.3.6.0.PDCCNXM_20190816.0000.00_9.0_cn, with multiple different miflash builds, same error. Tried patching the rom and not. Nothing worked, same edl authentication problem.
I believe, pretty sure, this is the build that bricked the phone: xiaomi.eu_multi_MI6X_8.6.28_v10-8.1
Maybe it can help you understand better? Also, how do i determine which is the highest ARB build available?
Thank you so much for the help!
Click to expand...
Click to collapse
did this brick happen when you wanted to change from jasmine to wayne ?
the error you are getting is your phone was stuck in EDL too long ...if you wait for more than 10 seconds you get error ..
open your phone manually amd enter edl again with test point
change to Miflash amd flash but dont wait longer than few seconds
also try with QFIL ...sometimes it will work when Miflash has timeout error
and every error is different ..if you dont tell me the error i can not say ..if you bricked with the 8.1 rom you dont have bad situation .. low ARB ..or if you used conversion zip you wont have ARB and your problem is you are too long in Edl mode
try to enter fastboot by holding power and volume down for very long time ..
if it doesnt work your only way is test point ..im sure you dont want that problem but it is all
explain your errors better if you want success ...if you go to fastboot see if computer will listen to command
fastboot oem edl
try the flashing again .....
look below
KevMetal said:
you need to download and try many different versions of Miflash
---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------
did this brick happen when you wanted to change from jasmine to wayne ?
the error you are getting is your phone was stuck in EDL too long ...if you wait for more than 10 seconds you get error ..
open your phone manually amd enter edl again with test point
change to Miflash amd flash but dont wait longer than few seconds
also try with QFIL ...sometimes it will work when Miflash has timeout error
and every error is different ..if you dont tell me the error i can not say ..if you bricked with the 8.1 rom you dont have bad situation .. low ARB ..or if you used conversion zip you wont have ARB and your problem is you are too long in Edl mode
try to enter fastboot by holding power and volume down for very long time ..
if it doesnt work your only way is test point ..im sure you dont want that problem but it is all
explain your errors better if you want success ...if you go to fastboot see if computer will listen to command
fastboot oem edl
try the flashing again .....
Click to expand...
Click to collapse
Ok so, ill retry explaining
I was on a CHINA Wayne MI6X originally, unlocked bootloader and TWRP. It was only updated through OTA and never flashed any custom rom before.
Then, i tried through TWRP to flash this build xiaomi.eu_multi_MI6X_8.6.28_v10-8.1, which is a EU rom, think it is A2 rom and the devices reboot to a black screen, EDL mode.
After, i tried flashing many different versions of WAYNE CHINA roms through different builds on MiFlash but none worked. MIUI 10, 11, even 9 but always get EDL AUTHENTICATION error.
So, CHINA to EU to EDL bricked phone.
Now, i tried rebooting to fastboot holding for a long time VOL- POWER button but adb doesnt see the phone, i think im still in EDL mode, because device managaer sees it as QUALCOMM 9008.
Also, now on MiFlash 2014 i get Error loading type library/DDL. (0x80029c4a: wait port ready to use 9)
Same on MiFlash 2015 and 2016.
On MiFlash 2018 i get EDL AUTHETICATION error.
Same o Miflash 2017.
Let me know if you understanded better, still, thank you again!
Marduk666 said:
Ok so, ill retry explaining
I was on a CHINA Wayne MI6X originally, unlocked bootloader and TWRP. It was only updated through OTA and never flashed any custom rom before.
Then, i tried through TWRP to flash this build xiaomi.eu_multi_MI6X_8.6.28_v10-8.1, which is a EU rom, think it is A2 rom and the devices reboot to a black screen, EDL mode.
After, i tried flashing many different versions of WAYNE CHINA roms through different builds on MiFlash but none worked. MIUI 10, 11, even 9 but always get EDL AUTHENTICATION error.
So, CHINA to EU to EDL bricked phone.
Now, i tried rebooting to fastboot holding for a long time VOL- POWER button but adb doesnt see the phone, i think im still in EDL mode, because device managaer sees it as QUALCOMM 9008.
Also, now on MiFlash 2014 i get Error loading type library/DDL. (0x80029c4a: wait port ready to use 9)
Same on MiFlash 2015 and 2016.
On MiFlash 2018 i get EDL AUTHETICATION error.
Same o Miflash 2017.
Let me know if you understanded better, still, thank you again!
Click to expand...
Click to collapse
ok man i think you made a big mistake flashing that package because it locked your bootloader ( i think ) ....
if the computer can see your phone as qualcomm9008 it is in EDL mode
you can save your phone but the authentication error ..could be ARB or locked bootloader ..
but anyway your best and ONLY option now is to get android 10 .zip for Wayne ...latest update for MIUI .. then
follow the instructions in the unbricking thread i sent you ..unzip ..search for folder in MIFLASH ..
-download QFIL flasher ..install and run AT SAME TIME
- select the choose port manually option and leave window open
( so three windows open .. miflash ( ready ) ... QFIL with sekect port open )
- then connect your usb cable to computer ( not phlone )
- get a paperclip and open it and fold it in half to look lkke tweezers
- then on another phone or computer follow video on how to open phone and do test point ( you will hold the twi points of the paperclip on two points in the phone )
- while holding the pin on the points insert usb to phone with free hand
- look at the select port manually window of QFIL ...when you see a device appears here let go of pin ..
now say okay to close sekect port window so it closes ..
- on Miflash press " refresh " then "flash" QUICKLY ..dont wait longer than 10 sec
- it will start to flash
*to opem your phone you need a guitar pick to push between the screen and body ...also special screw driver ( buy on Amazon ) to remove screws you see in video ..
# the reason is your phone has been too long in EDL to flash anymore ..so if you cant exit and enter EDL withbuttons or fastboot you ONLY have one option and that is testpoint
#that is why i said it must in 10 sec after you enter EDL that you flash or you will just have more errors everytime
***then you must just continue to enter and exit tesrpoint using my technique until one copy of Miflash will finish without error .BUT KEEP IN MIND ..everytime you fail you need to start over bevause too much time passed since you were in EDL
******dont lose hope beause miflash will accept and flash the officiak rom ARB4 ... if you find the right miflash version amd start flashing before EDL timeout
good luck bro go watch testpoint video and search for a guitar pick and screwdriver
KevMetal said:
ok man i think you made a big mistake flashing that package because it locked your bootloader ( i think ) ....
if the computer can see your phone as qualcomm9008 it is in EDL mode
you can save your phone but the authentication error ..could be ARB or locked bootloader ..
but anyway your best and ONLY option now is to get android 10 .zip for Wayne ...latest update for MIUI .. then
follow the instructions in the unbricking thread i sent you ..unzip ..search for folder in MIFLASH ..
-download QFIL flasher ..install and run AT SAME TIME
- select the choose port manually option and leave window open
( so three windows open .. miflash ( ready ) ... QFIL with sekect port open )
- then connect your usb cable to computer ( not phlone )
- get a paperclip and open it and fold it in half to look lkke tweezers
- then on another phone or computer follow video on how to open phone and do test point ( you will hold the twi points of the paperclip on two points in the phone )
- while holding the pin on the points insert usb to phone with free hand
- look at the select port manually window of QFIL ...when you see a device appears here let go of pin ..
now say okay to close sekect port window so it closes ..
- on Miflash press " refresh " then "flash" QUICKLY ..dont wait longer than 10 sec
- it will start to flash
*to opem your phone you need a guitar pick to push between the screen and body ...also special screw driver ( buy on Amazon ) to remove screws you see in video ..
# the reason is your phone has been too long in EDL to flash anymore ..so if you cant exit and enter EDL withbuttons or fastboot you ONLY have one option and that is testpoint
#that is why i said it must in 10 sec after you enter EDL that you flash or you will just have more errors everytime
***then you must just continue to enter and exit tesrpoint using my technique until one copy of Miflash will finish without error .BUT KEEP IN MIND ..everytime you fail you need to start over bevause too much time passed since you were in EDL
******dont lose hope beause miflash will accept and flash the officiak rom ARB4 ... if you find the right miflash version amd start flashing before EDL timeout
good luck bro go watch testpoint video and search for a guitar pick and screwdriver
Click to expand...
Click to collapse
Thank a lot man, really! But i DID IT! Following this guide! https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Now my phone works again, thank you a lot still, for you patience!
Marduk666 said:
Thank a lot man, really! But i DID IT! Following this guide! https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Now my phone works again, thank you a lot still, for you patience!
Click to expand...
Click to collapse
ok good work it is a good guide and it will help other people if they have trouble finding modified programmer files or connecting the phone and flashing quickly enough
here the difference was that i assumed but forgot to remind you to use the patched programmer files not to be rejecting but it was also included in the post of other XDA guy :good:
I tried installing crDroid (unlock bootloader, uploaded FW, recovery SHRP, then install ROM) and after reboot the phone would go back to recovery.
By mistake I "installed" SHRP from ZIP package (I thought I need to install latest recovery file to install ROM with android 12) and phone went into reboot loop, I can't do anything, any key combination doesn't help - I can't even turn it off.
help!
I opened the phone, disconnected the battery, but nothing happened - still bootloop
I'm planning to use SP Flash Tool
Immediately after connecting USB C, the phone boots into bootlop (after disconnecting and reconnecting the battery)
What happens when you flash the custom ROM?
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
U can also try to flash it with MI flash tool.
Sergij-SApcPro said:
What happens when you flash the custom ROM?
Click to expand...
Click to collapse
Operation completed with status [ ]. It looks like there should be a * in the middle and then it would be a sign to me that the ROM is loaded.
Sergij-SApcPro said:
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
Click to expand...
Click to collapse
At the time of writing, no key combination was working - I can't get into Fastboot or Recovery. I let the battery run out for that moment.
Sergij-SApcPro said:
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
Click to expand...
Click to collapse
Sergij-SApcPro said:
U can also try to flash it with MI flash tool.
Click to expand...
Click to collapse
That's what I'll do first, then move on to the solution below.
I opened the phone and disconnected the battery, but plugging in the USB cable immediately turns the phone on and bootloops again.
I'm using Linux and Windows, and one user hinted at hacking the USB driver so I believe it won't boot the phone, only then will I have communication? Other than that I don't know how to do it anyway.
For now, after the phone's battery runs out, I'll try with this solution
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
I've exhausted the battery, Mi Flash needs Fastboot, which I don't have.
I used
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
I got to the point of connecting the phone to the computer and it connects (the procedure says to use the Power button, but I had to disconnect the battery because Bootloop was falling in), using the Vol- button - the phone keeps connecting and disconnecting....
For a while I tried to connect the phone via SP Flash under Linux - in administrator mode the message "memory protection violation" appears (I don't know how the message is in English).
Adding a udev exception was supposed to help - after lsusb the Mediatek device appeared, I added the exception, restarted - and the same thing happens (the program crashes).
I finally managed (with the help of a group on telegram https://t.me/HelioG85_Unified) by switching off the phone and carefully going through all the points (except the update at the very end) from this link
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
There is a little problem, because SP Flash must be from the link in this post (because it will not fit DA)
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
Wow so many posts... Did you manage to fix the phone now? What do you mean by SP Flash will not fit the DA? Did you download the eng ROM for Lancelot? BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Sergij-SApcPro said:
Wow so many posts...
Click to expand...
Click to collapse
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Sergij-SApcPro said:
Did you manage to fix the phone now?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
What do you mean by SP Flash will not fit the DA?
Click to expand...
Click to collapse
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Sergij-SApcPro said:
Did you download the eng ROM for Lancelot?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Click to expand...
Click to collapse
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Great to hear that you fixed the phone, congratulations!
TomekParuszewski said:
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
Thanks for the info, but I don't need to flash it with SP Flash tool because that was earlier when I didn't try to install custom recovery. Now I have SHRP with CRDroid A12 and its Awesome.
Thanks for reading,
Bye
TomekParuszewski said:
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Yes
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Yes
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
SandShadow said:
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
Click to expand...
Click to collapse
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
voland34 said:
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
Click to expand...
Click to collapse
The battery trick does'nt work for me. I can't remember exact version, sorry - but my way was going BACK with SP Flash tool version (from newest to working with file). When I found right version the rest was only going with procedure.
I did it twice: first time I was scared, second - with finding right version of SPFT, every time - like walk in the park. Looong walk all procedure was like 2-3 hours.
Second one try was after trying to load Andorid 13 (2x). Don't do it kids!
After all, my Revolut app stop working lately on my phone and Redmi is retired for now... (and also becoming unusable because slowing dramatically)
Thanks for your answer. it has worked with battery empty (though that might not have benn necessary); not on 1st atttempt v5.2020 but it did with version 5v.2216 in case it might help someone...it didnt flash miui fastboot rom 12.5 but it did flash engineering rom. and from there i will twrp and miui.
Thanks for your suggestion of trying different spflash versions.