The surface pen or a N-Trig compatible pen is a must. It turns the Moto Z4 into a Moto Z4 Note. It allows pressure sensitivity in apps that support it and also more precise navigation. I've downloaded several ink-centric apps and I like that it is another special screen like the shattershield which is only found on a Motorola phone.
I can confirm, this works.
I thought I was the only one who noticed this! I almost shi+ myself in excitement when my Surface Go pen worked on my phone.
I bought a cheap Stylus supporting MS Surface Pen protocol and I can confirm, too, that it works.
Related
I got a used galaxy note in tip top condition and decided to apply a new clear screen protector. My only problem is that each and everytime I use my SPen with any kind of pressure (except the really really light ones) my screen protector gets scratched! This is absolutely appalling and my screen protector is the same brand I always use for all my phones which I have never had a problem before. I've read on the forums about some people claiming that the Spen should not scratch the screen because it was designed for that BUT I tried out another Spen on my note and it didn't leave a single mark! Now I'm left thinking that my pen was probably modified or damaged or something but it looks pristine in all angles.
Are there samsung ICS roms that have the home button lag / double click feature disabled? I'm running rocket rom and can't seem to find it.
Lastly, can anyone try sliding their finger and applying pressure on the home button on the left or right hand side? I tried it on mine and I could have sworn the whole button slopes down and this is making me worried.
I am used to using a cheap stylus at work (free stylus from tradeshow).
With my last Samsung galaxy s4 active, I can register touch or draw line by lightly glide the stylus on the screen surface with no down force.
Now I have G4 and the same cheap stylus don't work as sensitive anymore. I will get discontinuity if I try to draw a line and sometimes even lock screen when I try to swipe home screen.
Just wondering if someone have a known stylus (hopefully not with a fat round ball tip) that is known to work well with G4?
Coming from an iPhone, the touchscreen on the Note 5 is way too sensitive for me. If I move my finger 2mm away from the screen, it still registers that I am touching it. Makes typing extremely cumbersome.
I'm wondering if there is any way, rooted or otherwise, to decrease the sensitivity so that the screen only registers touches when I am actually touching it.
Thanks for any help!
by default it is. you have the option to increase sensitivity.
edit: I can't seem to find the settings for it, now. but the info said something about it being useful for when wearing gloves.
maybe adding a tempered glass screen protector can give you just the right sensitivity you're looking for. I know the one on my iPhone reduced the sensitivity a bit. and you gain some protection at the same time.
keep in mind.. if you root, you may trip Samsung's KNOX and no longer be able to use Samsung Pay.
(Sent from my iPhone via Tapatalk)
That was a note 4 option, they removed it for the 5.
How do I turn down the sensitivity on my Samsung galaxy note 4 edge
I only got this phone couple of days back and I am having a strange problem.
After installing a screen guard, touch stops working when phone is lying on flat surface. Once I lift the phone, touch starts working again. This happens regardless of the phone is plugged or not in a power socket.
Removing screen guard resolves this issue. However, I installed three different screen guards of glass, plastic and rubber types and with each type touch stops working on a flat surface.
I also did a factory reset but it didn't help. I tried with case on and off but the problem still persists.
At this point I am clueless how to resolve this issue as the phone doesn't seem to be defective as touch works flawlessly without a screen guard.
Same here!
With glass screen protector I have this issue... Can't really use it while device lying on a table.
Hi... Same here also... I thought the screen problem but not even lying on the table but when in charging lying on the table also can't touch... And sometimes it's stuck when to touch... My nokia 6 i think also like that... Maybe the screen curve is??
I have screen protector bought from Taobao, no such problem on my Nokia 8, TA-1004.
The screen protector is not glass type, but looks like plastic type.
Another strange observation: If I plug headphone jack when the phone is lying on flat surface, touch starts working again.
I suspect this entire thing has to do with metal/glass body of the phone and static electricity generated or magnetic field around touch panel.
I don't have much knowledge on this type of scientific stuff so I am not sure what the problem is.
It's the cheap glass protector and its glue that is messing up the touch screen.
references said:
It's the cheap glass protector and its glue that is messing up the touch screen.
Click to expand...
Click to collapse
I thought so. But what about headphone jack fixing touch issues with screen protector on?
Also, I have used similar quality screen guards on Moto and Huawei phones at my home and they don't have this issue.
Nitg16 said:
I thought so. But what about headphone jack fixing touch issues with screen protector on?
Also, I have used similar quality screen guards on Moto and Huawei phones at my home and they don't have this issue.
Click to expand...
Click to collapse
Are you connecting it to headphones or speakers?
Maybe the capacitive buttons doesn't like the glue and messes up everything? You could try enabling these in the Developer Options: Show taps & Pointer location. Let me know what is happening
references said:
Are you connecting it to headphones or speakers?
Maybe the capacitive buttons doesn't like the glue and messes up everything? You could try enabling these in the Developer Options: Show taps & Pointer location. Let me know what is happening
Click to expand...
Click to collapse
Headphones.
Enabled taps and pointer location. When phone is not touching a flat surface everything works fine. A curve is drawn on screen showing various gestures and a circle is drawn to show taps.
When lying on flat surface, if I use any touch gestures (e.g. scrolling) curve is drawn once in 5-6 attempts. Same with taps, circles appear only once in a while.
It is all very erratic. When I repeatedely try to tap anything, I receive ghost touces at a different part of screen.
Just noticed that I don't need headphone jack to fix touch. Blocking 3.5 mm port with one finger also works. This is truly getting weird.
Have you shown it to the Service Centre? Do they have any theories?
Sent from my Pixel 2 XL using XDA-Developers Legacy app
No, since the phone works perfectly without screen guard, I think service center guys will simply tell me to use it without a screen guard.
But I will indeed show them this problem after few days, though I am not sure they will understand or will be helpful in this regard.
I think I am reaching somewhere. The antenna reception at the top might be messing with touch.
What I have observed that touching the top of the phone or keeping any object or my hand one inch away from top of the phone fixes touch issues.
If I remove the object or move it farther than one inch, touch becomes messy again.
If I put little pressure on bottom chin of the phone, the top of the phone raises a bit so that the top antenna is not close to flat surface any more. This also fixes touch issues. Lowering top part of the phone brings back touch issues.
Anyone else with this issue can test this?
This video exactly describes my issue:
I found that many phones had these issues in past including oneplus, lg, sony and galaxy phones. Everywhere it was mentioned that it is a grounding issue which is unfortunately a hardware detect.
My phone is fortunately within replacement window. So I will contact the seller and request for a replacement.
I was thinking about the grounding, but when you mentioned you used headphones i thought it couldn't be the case.
Keep us updated if you get it replaced.
Just received the replacement. Same problem on the new one
I don't know what to do now. No other phones in my family have this problem and that includes $200 budget devices. This is flagship and much more costly.
I will just summarize different cases in which the touch issues on a flat surface gets fixed on my device:
- Inserting headphone jack (with screen gaurd applied on display).
- Inserting charging cable (with screen guard applied on display).
- Touching any part of the phone with finger including blocking the headphone jack (with screen guard applied).
- Removing the screen guard.
I am tired of this sh*t. I have tried all things possible to fix it. I have also wasted money on 6 different screen guards to fix this issue.
Some guys on galaxy s8 forums mentioned that modern curved phones uses a touchscreen placement mechanism different than traditional smartphones (they were also having the same problem).
There were two possible solutions mentioned:
Find a screen guard that has glue all over, not just around the edges or at dots. Which means that screen guard should stick to the screen 100% flat without any gap, air or bubbles.
Second solution was to use a flip cover to protect the screen and no screen guard.
I will go with second solution and buy a flip cover. I simply have no energy left to hunt for screen guards that work properly on Nokia 8. Not to say that you will never know if it works or not unless you purchase it and stick on your phone.
Hi, I'm writing from Italy and I've the same problem, exactly the same problem, solvable with the same solutions you have proposed: remove the protective film (a glass screen guard in my case).
I'm noticing that the touch screen works perfectly with the protective film only if the phone is connected via USB cable to the battery charger or to the pc.
I recently purchased a Tab S8 Ultra and it's been great so far. However, I noticed that the S Pen doesn't work consistently at the edges of the tablet, particularly the 'bottom' edge where the keyboard connector is.
I initially observed this when I tried to click the 'home' navigation button with the pen, but the click would not register. Repeated attempts to click were met with failed responses more often than registered clicks. This was with the tablet in landscape mode and the taskbar enabled - so the navigation buttons were concentrated at the bottom right of the screen. With the tablet rotated to portrait mode, however, the buttons were responsive and worked as expected. I tested this in Samsung Notes as well. It seems to be common for small 'dead spots' to appear when drawing along the edge. The thing is, when making a pass back towards those spots, they can sometimes be drawn over. These spots are generally in the same area, but the pens' ability to function over these regions seems random. See examples.
I assume this has to do with the magnets around the sides of the tablet interfering with the display/pen EMR technology, but it's odd that it is inconsistent. If the tablet is using permanent magnets at the bottom, one would expect the effects of their magnetic field to be present at all times. It would also be a pretty major design flaw if the pen doesn't consistently work with the navigation buttons in one of their default locations as well.
Has anyone noticed similar behavior with their S8 Ultra (or any S8 series tablet for that matter)? Do you think I have a defective unit?
Make sure you have not turned on disable gestures and buttons when using s pen. That will make so when you use s pen the home button and such won't take affect when touching them with the pen. So no it has nothing to do with magnets for keyboard. Since i tried now with my s pen and it's registering fine.
Hello
Im facing the same issue infact my s pen doesn't work properly in the middle of the screen also. If i press it too hard then it seems to work fine. It started happening a month ago can someone please suggest what i should do ?
Also if it take it to the service center will they replace the device ?
Versace_V said:
I recently purchased a Tab S8 Ultra and it's been great so far. However, I noticed that the S Pen doesn't work consistently at the edges of the tablet, particularly the 'bottom' edge where the keyboard connector is.
I initially observed this when I tried to click the 'home' navigation button with the pen, but the click would not register. Repeated attempts to click were met with failed responses more often than registered clicks. This was with the tablet in landscape mode and the taskbar enabled - so the navigation buttons were concentrated at the bottom right of the screen. With the tablet rotated to portrait mode, however, the buttons were responsive and worked as expected. I tested this in Samsung Notes as well. It seems to be common for small 'dead spots' to appear when drawing along the edge. The thing is, when making a pass back towards those spots, they can sometimes be drawn over. These spots are generally in the same area, but the pens' ability to function over these regions seems random. See examples.
I assume this has to do with the magnets around the sides of the tablet interfering with the display/pen EMR technology, but it's odd that it is inconsistent. If the tablet is using permanent magnets at the bottom, one would expect the effects of their magnetic field to be present at all times. It would also be a pretty major design flaw if the pen doesn't consistently work with the navigation buttons in one of their default locations as well.
Has anyone noticed similar behavior with their S8 Ultra (or any S8 series tablet for that matter)? Do you think I have a defective unit?
Click to expand...
Click to collapse
I have the exact same problem + it also happpes in the top edge not just the bottom ,,
As you said home button doesn't work with s pen but other buttons ( back , recent , screenshot , power off ) works instantly without any miss , which is weird
But in other scenarios , not home screen , like photopea.com ; the "adding layer" button ( which is at the bottom edge almost at the same place of home button ) doesn't work with s pen
Another example; in adobe lightroom the top edge have the same problem, it doesn't respond when tapping ir drawing on it , but it Does when starting the drawing in a closer area from the middle then moving the s pen to the edge , in this case it works , which is very weird
Ahmad-issa1999 said:
I have the exact same problem + it also happpes in the top edge not just the bottom ,,
As you said home button doesn't work with s pen but other buttons ( back , recent , screenshot , power off ) works instantly without any miss , which is weird
But in other scenarios , not home screen , like photopea.com ; the "adding layer" button ( which is at the bottom edge almost at the same place of home button ) doesn't work with s pen
Another example; in adobe lightroom the top edge have the same problem, it doesn't respond when tapping ir drawing on it , but it Does when starting the drawing in a closer area from the middle then moving the s pen to the edge , in this case it works , which is very weird
Click to expand...
Click to collapse
If your issues are to the right of the front-facing camera, maybe they have to do with the S Pen magnets?
I ultimately decided to exchange the tablet. My new one doesn't have any of my aforementioned problems. Also, the issues had nothing to do with the gestures option - the dead spots existed with gestures on/off.
Although the issue is solved, the root cause is still unknown. I'm starting to consider if the problems I had were due to a case. For a short period of time I had a Speck Balance Folio on my first Tab S8 Ultra. It was a nice case but I had to remove it after the first day because the cases magnets were creating huge dead spots on the screen. The case had a pretty large magnet spanning the lower half of the tablet, so maybe it was strong enough to permanently alter the in-built tablet magnets? I never drew on the edges of the screen until after I removed the case, so there was no way to know if the issue existed beforehand.
I currently have the official Samsung Protective Standing cover on my new tablet, and while it does have two small magnets near the edges, I have no issues using any part of the screen with the S Pen.
I guess to answer my own question in the post, and to possibly help anyone reading this in the future:
Your tablet should not be having issues near the edges of the screen.
Avoid all third party cases if possible, unless they are confirmed to be magnet-free (e.g. Supcase Unicorn Beetle and Poetic Turtleskin - It's a shame there are no magnet-free folio cases with decent protection).
Versace_V said:
I recently purchased a Tab S8 Ultra and it's been great so far. However, I noticed that the S Pen doesn't work consistently at the edges of the tablet, particularly the 'bottom' edge where the keyboard connector is.
I initially observed this when I tried to click the 'home' navigation button with the pen, but the click would not register. Repeated attempts to click were met with failed responses more often than registered clicks. This was with the tablet in landscape mode and the taskbar enabled - so the navigation buttons were concentrated at the bottom right of the screen. With the tablet rotated to portrait mode, however, the buttons were responsive and worked as expected. I tested this in Samsung Notes as well. It seems to be common for small 'dead spots' to appear when drawing along the edge. The thing is, when making a pass back towards those spots, they can sometimes be drawn over. These spots are generally in the same area, but the pens' ability to function over these regions seems random. See examples.
I assume this has to do with the magnets around the sides of the tablet interfering with the display/pen EMR technology, but it's odd that it is inconsistent. If the tablet is using permanent magnets at the bottom, one would expect the effects of their magnetic field to be present at all times. It would also be a pretty major design flaw if the pen doesn't consistently work with the navigation buttons in one of their default locations as well.
Has anyone noticed similar behavior with their S8 Ultra (or any S8 series tablet for that matter)? Do you think I have a defective unit?
Click to expand...
Click to collapse
Versace_V said:
If your issues are to the right of the front-facing camera, maybe they have to do with the S Pen magnets?
I ultimately decided to exchange the tablet. My new one doesn't have any of my aforementioned problems. Also, the issues had nothing to do with the gestures option - the dead spots existed with gestures on/off.
Although the issue is solved, the root cause is still unknown. I'm starting to consider if the problems I had were due to a case. For a short period of time I had a Speck Balance Folio on my first Tab S8 Ultra. It was a nice case but I had to remove it after the first day because the cases magnets were creating huge dead spots on the screen. The case had a pretty large magnet spanning the lower half of the tablet, so maybe it was strong enough to permanently alter the in-built tablet magnets? I never drew on the edges of the screen until after I removed the case, so there was no way to know if the issue existed beforehand.
I currently have the official Samsung Protective Standing cover on my new tablet, and while it does have two small magnets near the edges, I have no issues using any part of the screen with the S Pen.
I guess to answer my own question in the post, and to possibly help anyone reading this in the future:
Your tablet should not be having issues near the edges of the screen.
Avoid all third party cases if possible, unless they are confirmed to be magnet-free (e.g. Supcase Unicorn Beetle and Poetic Turtleskin - It's a shame there are no magnet-free folio cases with decent protection).
Click to expand...
Click to collapse
The problem ( in lightroom ) happens in the left side of the cameras
I have the official Samsung bookcover keyboard , i removed it but the home button stil didn't respond , then i thought what will happen if i try from a different angle ? And that's what i did , i used the s pen as its top is heading to the cameras not to my side , and it worked ! Home button responded in every single try ,,,, then i placed back the kickstand piece of the bookcover and did the same with the s pen , and it also worked with no miss , so i think it's not the magnets' fault , it's something in the angle of the pen ,,,, note that i tried the normal way of using it ( when the top of the s pen is heading to me ) and rotate it many times and touch the home button , didn't work , so this probably confirms that it's a matter of angle detection not dead spots or magnet thing
Also , the top left edge responded when swiping down to bring the quick setting , so maybe lightroom app is programmed to not detect the edge's touch in order to prevent any accident touching when handing the device
So i guess there're no big concerns here , we can live with that
Generally speaking, Samsung tablets have always had issues with covers that use magnets to hold the flap closed against the screen as they are too strong for the inbuilt algorithms to compensate for. The Spen itself is nothing but a magnet whose movement is detected by these algorithms. The magnet flaps interfere with that.
I have had ZERO issues since I switched to a cover that uses an elastic band to hold the flap closed against the screen. It has magnets, sure, but they're tiny and only for the lock/unlock functionality, not to physically hold the flap against the screen.
Hope this helps!