Database Develop

Treble ROMS/P20 Pro Stock Camera app

As we know we have a few treble Roms available for our device. But they are not stable at all in terms of the camera.they could be faster and smoother than the stock 7.0.
20 mpx Huawei mate 9 camera has a lot of features but those Roms lack that privilege.
Actually, we have a great Nougat Roms as well. Which I prefer - fromfuture-.
I'll be using this stock rom until a new AOSP 8.1 or RR Remix will be released. ​
[Resurrection Remix] [Unofficial] [2018-05-19] Phh-Treble https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
[AOSP 8.1] [2018-06-07] Phh-Treble
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Lineage] [Unofficial] [2018-05-19]
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/lineage-phh-treble-t3767690
How to flash a Generic System Image (GSI) on Project Treble supported devices​https://www.xda-developers.com/flash-generic-system-image-project-treble-device/​For this Roms you have to flash:​
1)TWRP https://www.androidfilehost.com/?fid=890278863836283747
2)Gapps: https://www.androidfilehost.com/?fid=746163614322274929
3)addosu-15.1am -to root your device (Supersu doesn't work or magisk) https://www.androidfilehost.com/?fid=674106145207485248
4)P20 Pro Stock Camera : https://www.androidfilehost.com/?fid=674106145207497114​5)If you want to gain a better battery performance, flash the HyperPlus Kernel. https://www.androidfilehost.com/?fid=962339331458990548​
Thanks to phhusson, and the developers for these Roms.:good:

Reserved

osk4rin said:
Here is the Stock Huawei camera zip file.
works perfectly on my US Huawei mate 9, using RR remix Oreo or Lineage 15.
Just flash it with Magisk, don't forget to flash your stock kernel before on fastboot .
reboot it and that's it.
Click to expand...
Click to collapse
What problems and bugs you are facing now with Resurrection remix? Is it worth to update?!
Thanks in advance,?

Thanks .. ????

Mohammed_M. said:
What problems and bugs you are facing now with Resurrection remix? Is it worth to update?!
Thanks in advance,?
Click to expand...
Click to collapse
Hi! Yes,its Worth it tough. Is fast and smooth.and lineage as well.
Pretty much just a few bugs, but minors. Now we have 4g available on RR remix.the only issue is the twrp .still encrypted,if I want to flash any zip file from there I need to moved to my Sd card.
Also I can't flash the - Adaway Youtube-magisk module.I don't know why

mataflakitas said:
Thanks .. ????
Click to expand...
Click to collapse
You're welcome

Mohammed_M. said:
What problems and bugs you are facing now with Resurrection remix? Is it worth to update?!
Thanks in advance,
Click to expand...
Click to collapse
I have RR and rooted though Magisk with SafetyNet passed.
All in all it's very nice, sometimes my phone makes noises even if it's in "Not disturb" Mode. But that only happened twice till now.
Everything else works! GPS, Wifi. 4g, Bluetooth etc. Only Android Auto doesnt work for me, but that's not that important.

Emare212 said:
I have RR and rooted though Magisk with SafetyNet passed.
All in all it's very nice, sometimes my phone makes noises even if it's in "Not disturb" Mode. But that only happened twice till now.
Everything else works! GPS, Wifi. 4g, Bluetooth etc. Only Android Auto doesnt work for me, but that's not that important.
Click to expand...
Click to collapse
How do you go about installing this rom? I'm worried Ill screw up my mate 9 but I hate emui so much. I'm using fromfuture with twrp atm

KitsuneUK said:
How do you go about installing this rom? I'm worried Ill screw up my mate 9 but I hate emui so much. I'm using fromfuture with twrp atm
Click to expand...
Click to collapse
So fromfuture is Nougat based?
Then you need to upgrade to Oreo first. Just search the forum, there are several Guides.
After that extract the stock boot.img, kernel.img and recovery_ramdisk.img from your stock rom using Huawei Update Extractor (settings->uncheck checks)
Than simply flash the three Images through fastboot on your phone and do a Data Format + Cache Wip ein Stock Recovery.
Than flash RR Rom with fastboot flash system and Twrp if you want.

Emare212 said:
So fromfuture is Nougat based?
Then you need to upgrade to Oreo first. J
Click to expand...
Click to collapse
There any guides I can follow?

Emare212 said:
So fromfuture is Nougat based?
Then you need to upgrade to Oreo first. Just search the forum, there are several Guides.
After that extract the stock boot.img, kernel.img and recovery_ramdisk.img from your stock rom using Huawei Update Extractor (settings->uncheck checks)
Than simply flash the three Images through fastboot on your phone and do a Data Format + Cache Wip ein Stock Recovery.
Than flash RR Rom with fastboot flash system and Twrp if you want.
Click to expand...
Click to collapse
So I have two questions right now : how to get a back up of my system and how to gate the update.app? So can you answer me please
Ps I have the stock recovery. and thanks in advance ?

KitsuneUK said:
There any guides I can follow?
Click to expand...
Click to collapse
It's a while ago since I upgraded to Oreo, but I think I used Method 1 from https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/#Method_1_using_HWOTA_Tool
But no Guide was perfect, I needed to mix them all a bit
https://forum.xda-developers.com/mate-9/how-to/official-oreo-c432-l29-l09-t3720277
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
---------- Post added at 01:32 PM ---------- Previous post was at 01:19 PM ----------
Mohammed_M. said:
So I have two questions right now : how to get a back up of my system and how to gate the update.app? So can you answer me please
Ps I have the stock recovery. and thanks in advance
Click to expand...
Click to collapse
Are you rooted? Are you using Stock Rom from huawei?

Emare212 said:
It's a while ago since I upgraded to Oreo, but I think I used Method 1 from https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/#Method_1_using_HWOTA_Tool
But no Guide was perfect, I needed to mix them all a bit
https://forum.xda-developers.com/mate-9/how-to/official-oreo-c432-l29-l09-t3720277
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
---------- Post added at 01:32 PM ---------- Previous post was at 01:19 PM ----------
Are you rooted? Are you using Stock Rom from huawei?
Click to expand...
Click to collapse
No I don't have root I have emui 8 and everything is stock

Mohammed_M. said:
No I don't have root I have emui 8 and everything is stock
Click to expand...
Click to collapse
Then you can use HiSuite on your PC to create a backup of your data.
So if you are using EMUI 8 your phone is already on stock Oreo?

Is the front camera working in the stock huawei camera on RR? if it is might try updating tonight...

Emare212 said:
Then you can use HiSuite on your PC to create a backup of your data.
So if you are using EMUI 8 your phone is already on stock Oreo?
Click to expand...
Click to collapse
Yes it is on stock oreo I did a backup of the data but what about the system? Or update.app so I can back to stock again if I wanted to?

KitsuneUK said:
Is the front camera working in the stock huawei camera on RR? if it is might try updating tonight...
Click to expand...
Click to collapse
Normal Camera app works well for me with both cameras. I don't have Huawei Stock Camera installed.
---------- Post added at 03:44 PM ---------- Previous post was at 03:25 PM ----------
Mohammed_M. said:
Yes it is on stock oreo I did a backup of the data but what about the system? Or update.app so I can back to stock again if I wanted to?
Click to expand...
Click to collapse
If you have your data backup already you can easily go to RR and back to Stock if you want with this method.
First you need to unlock your bootloader with the code you will get/got from Huawei. See here.
1. Go to firmware database and find your stock firmware (which you are using atm)
2. Download the FullOTA-MF-PV (click on "update" to download) and unzip it.
3. Download Huawei Update Extractor
4. Open Huawei Update Extractor and go to settings --> Disable both checksum boxes
5. Import your update.app File
6. Mark kernel.img, ramdisk.img and recovery_ramdis.img and rightclick -> Extract Selected
7. Flash them trought fastboot
Code:
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
8. Go to Recovery and do a factory reset and cache wipe
9. Flash your RR rom system.img with
Code:
fastboot flash system system.img
10. Flash TWRP if you want
Code:
fastboot flash recovery_ramdisk twrp.img
Get TWRP here: https://mega.nz/#!pT5lRA7Y!G5DhJdsR-...fHGzN8OOu9aCko or here https://forum.xda-developers.com/mate-9/development/recovery-twrp-3-2-1-0-oreo-t3734967
11. Reboot
12. Optional Root with Magisk 15.4 (see here) --> Simply flash the zip in TWRP and install Magisk Manager App (if you fail in SafetyNet Test flash after Reboot this in TWRP)
13. Update in Magisk Manger App directly to Magisk 16

Emare212 said:
Normal Camera app works well for me with both cameras. I don't have Huawei Stock Camera installed.
---------- Post added at 03:44 PM ---------- Previous post was at 03:25 PM ----------
If you have your data backup already you can easily go to RR and back to Stock if you want with this method.
First you need to unlock your bootloader with the code you will get/got from Huawei. See here.
1. Go to firmware database and find your stock firmware (which you are using atm)
2. Download the FullOTA-MF-PV (click on "update" to download)
3. Download Huawei Update Extractor
4. Open Huawei Update Extractor and go to settings --> Disable both checksum boxes
5. Import your firmware.zip files
6. Mark kernel.img, ramdisk.img and recovery_ramdis.img and rightclick -> Extract Selected
7. Flash them trought fastboot
8. Go to Recovery and do a factory reset and cache wipe
9. Flash your RR rom system.img with
10. Flash TWRP if you want Get TWRP here: https://mega.nz/#!pT5lRA7Y!G5DhJdsR-...fHGzN8OOu9aCko
11. Reboot
12. Optional Root with Magisk 15.4 (see here) --> Simply flash the zip in TWRP and install Magisk Manager App (if you fail in SafetyNet Test flash after Reboot this in TWRP)
13. Update in Magisk Manger App directly to Magisk 16
Click to expand...
Click to collapse
Really thank you my friend I really appreciate that ?.

Mohammed_M. said:
Really thank you my friend I really appreciate that .
Click to expand...
Click to collapse
No Problem. For Step 1-7 I dont know, if it's meaningful for you, because you are already on Stock. Maybe @osk4rin, @ante0 or @ajsmsg78 knows it.
I would say Step 1-7 is useless for you and you don't need to do it, but yeah, i dont really know

Emare212 said:
Normal Camera app works well for me with both cameras. I don't have Huawei Stock Camera installed.
---------- Post added at 03:44 PM ---------- Previous post was at 03:25 PM ----------
If you have your data backup already you can easily go to RR and back to Stock if you want with this method.
First you need to unlock your bootloader with the code you will get/got from Huawei. See here.
1. Go to firmware database and find your stock firmware (which you are using atm)
2. Download the FullOTA-MF-PV (click on "update" to download)
3. Download Huawei Update Extractor
4. Open Huawei Update Extractor and go to settings --> Disable both checksum boxes
5. Import your firmware.zip files
6. Mark kernel.img, ramdisk.img and recovery_ramdis.img and rightclick -> Extract Selected
7. Flash them trought fastboot
8. Go to Recovery and do a factory reset and cache wipe
9. Flash your RR rom system.img with
10. Flash TWRP if you want Get TWRP here: https://mega.nz/#!pT5lRA7Y!G5DhJdsR-...fHGzN8OOu9aCko
11. Reboot
12. Optional Root with Magisk 15.4 (see here) --> Simply flash the zip in TWRP and install Magisk Manager App (if you fail in SafetyNet Test flash after Reboot this in TWRP)
13. Update in Magisk Manger App directly to Magisk 16
Click to expand...
Click to collapse
Ok my friend but there are another thing I didn't get my model from the list my model is MHA_L29C158B370 so where should I look for it?

[GUIDE][CUSTOM ROMS] Flashing GSI and getting most of the things work

As this device supports Project Treble, it is possible to flash and boot generic system images.
Things needed:
Asus Zenfone Max Pro M1 with unlocked bootloader and twrp recovery
Instructions:
1. Make a system and vendor backup in TWRP
2. Download any A only GSI from web or here
For now, AospExtended is the most stable and has only 1 bug i.e. no out volte. Flash any other gsi at your own risk. If you do, please report which one you flashed and what are the bugs in it.
You can always restore your backup to come back to stock rom.
3. Extract the gsi if it is in rar/zip format to get system.img
4. Copy/move this system.img to your fastboot directory
5. Connect your phone in fastboot mode and enter the following command
Code:
fastboot flash system system.img
TWRP can also be used to flash system.img to system partition, if it doesn't work, try with fastboot
6. Press and hold volume down + Power on to force reboot to twrp
7. Now, if you want flash gapps, make a system backup in twrp, reboot to recovery, and restore this backup you just made
8. Flash gapps now
10. Reboot to system
If there is no audio in calls, flash call audio fix
If it doesn't boot for you, try flashing magisk

res

Thanks for this , hope to see fully stable AEX soon ??

@Sudeep Duhoon
Have you also used AEX GSI for the guide or other one ?
Thank you for the work.

.A.V.i.n.a.S.h. said:
@Sudeep Duhoon
Have you also used AEX GSI for the guide or other one ?
Thank you for the work.
Click to expand...
Click to collapse
i had flashed all of them(from the link and more),
the aex is best for now (from the link posted)

can you please write or check the backup boxes , there are too many

there are 3 types of roms. i know a b wont work. should i download a/ab or only a?

Sudeep Duhoon said:
i had flashed all of them(from the link and more),
the aex is best for now (from the link posted)
Click to expand...
Click to collapse
Can you share some screenshots ?
Thanks

austinpinto said:
there are 3 types of roms. i know a b wont work. should i download a/ab or only a?
Click to expand...
Click to collapse
There are only 2 types of partitions A only and A/B type
You should download A only type GSI for Zenfone Max Pro M1

Its support on ZE55KKL(Zenfone 4) model aslo?

prakashwaran said:
Its support on ZE55KKL(Zenfone 4) model aslo?
Click to expand...
Click to collapse
Idk i don't have it
Sry
Sent from my ASUS_X00TD using Tapatalk

i've flashed GSI RR n LOS but sound didn't come out on 3,5 jack,

Pixel Experience is now open for Treble Devices.
Will it works for our device ?

yes if its a only it will work.
ab will not work.
can you please give link for it?
gusbalaa said:
Pixel Experience is now open for Treble Devices.
Will it works for our device ?
Click to expand...
Click to collapse

austinpinto said:
yes if its a only it will work.
ab will not work.
can you please give link for it?
Click to expand...
Click to collapse
There you go.
https://www.xda-developers.com/pixel-experience-project-treble-rom/

so if any1 wants to flash this you must download this file.
https://download.pixelexperience.or...arm64_a-8.1.0-20180526-2337-OFFICIAL.img.zip/
gusbalaa said:
There you go.
https://www.xda-developers.com/pixel-experience-project-treble-rom/
Click to expand...
Click to collapse

A video tutorial will be very usefull pls can u upload one

Sudeep Duhoon said:
As this device supports Project Treble, it is possible to flash and boot generic system images.
Things needed:
Asus Zenfone Max Pro M1 with unlocked bootloader and twrp recovery
Instructions:
1. Make a system and vendor backup in TWRP
2. Download any A only GSI from web or here
For now, AospExtended is the most stable and has only 1 bug i.e. no out volte. Flash any other gsi at your own risk. If you do, please report which one you flashed and what are the bugs in it.
You can always restore your backup to come back to stock rom.
3. Extract the gsi if it is in rar/zip format to get system.img
4. Copy/move this system.img to your fastboot directory
5. Connect your phone in fastboot mode and enter the following command
Code:
fastboot flash system system.img
TWRP can also be used to flash system.img to system partition, if it doesn't work, try with fastboot
6. Press and hold volume down + Power on to force reboot to twrp
7. Now, if you want flash gapps, make a system backup in twrp, reboot to recovery, and restore this backup you just made
8. Flash gapps now
10. Reboot to system
If there is no audio in calls, flash call audio fix
If it doesn't boot for you, try flashing magisk
Click to expand...
Click to collapse
How is the battery backup in GSI

has any1 flashed Pixel Experience is it working stable?
please reply.
also can the app post backup of system and vender cause i forgot to do it and im on los and want to restore back to stock.

austinpinto said:
can the app post backup of system and vender cause i forgot to do it and im on los and want to restore back to stock.
Click to expand...
Click to collapse
https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420 follow these instructions.

Request for oxygen os rom

Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..

Divyam2201 said:
Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..
Click to expand...
Click to collapse
Also hoping for something like that :good:

Divyam2201 said:
Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..
Click to expand...
Click to collapse
I think that would be super cool

Not gonna happen, due to lack of active devs, also it's very hard to port an oem rom

fir1996 said:
Not gonna happen, due to lack of active devs, also it's very hard to port an oem rom
Click to expand...
Click to collapse
Somebody could ,,Re Port" IT from redmi Note 5 pro

StarSix01 said:
Somebody could ,,Re Port" IT from redmi Note 5 pro
Click to expand...
Click to collapse
It's possible , i know but some of the "big" devs here abandoned our device,, that's the problem...

I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable

StarSix01 said:
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
Click to expand...
Click to collapse
Can you post a tutorial about how to make it work...

Divyam2201 said:
Can you post a tutorial about how to make it work...
Click to expand...
Click to collapse
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
---------- Post added at 01:14 PM ---------- Previous post was at 01:13 PM ----------
StarSix01 said:
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
Click to expand...
Click to collapse
I used Dec update vendor.img and boot.img

StarSix01 said:
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
Click to expand...
Click to collapse
Got any fix for fingerprint and faceunlock??
And can you also make a twrp backup and post it

[GUIDE] Flash Treble ROMs on OP7 Pro

Hey folks, after some digging I found a method how to flash Treble ROMs on our OP7 Pros!
I've only achieved this by following many great guides here on xda so credits go to: @Exelios and @demkantor for their threads which you can find here respectively:
https://forum.xda-developers.com/oneplus-6/how-to/treble-mistery-solved-developer-t3800716
https://forum.xda-developers.com/showthread.php?t=2277112
Prerequisites:
Make sure all drivers for your device have already been installed. Otherwise plug in your phone to your PC and wait for all drivers to finish installing
Latest fastboot - minimal packages won't work, so follow the guide from the second link above
Stock boot.img and vbmeta.img which you can get from stock fastboot ROMs found here: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Inside these zips there's another zip called images.zip in which you can find required imgs for your particular device
Treble ROM of your choice (arm64 a/b)
Steps:
Copy all sensitive data from your phone as this process will wipe your phone entirely!
This includes: photos, songs, and any other files!
Put all needed files in one folder
Run cmd
Type: cd <your folders directory>
Reboot your phone in fastboot mode (hold power+vol up+vol down for a few seconds)
and connect it to your PC
Then type:
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
After that:
Code:
fastboot -w flash system <your Treble ROMs name>.img
Using just the inactive partition and OxygenOS on another didn't seem to work for me.
This is the point at which your data will be erased so make sure again you have all your files
And finally:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
This is required. If you want to go to stock either flash it again without
Code:
--disable-verity --disable-verification
or use aforementioned stock fastboot ROM package
Now reboot and wait for the phone to boot
Success!
If you got a bootloop or something just didn't go right you will have to repeat all of the steps
Now you can flash patched boot image to get root or try any of the fixes found here
Bugs:
60Hz
Fingerprint sensor
After using front camera it's stuck - it won't slide back inside the phone
Only 3G data connection
Wi-Fi signal seems to be quite weak
No Warp Charge
Credits:
@Exelios
@demkantor
@mauronofrio

I got 90Hz working on my FlokoROM GSI with this dirty hack:
https://github.com/AndroPlus-org/an...mmit/724725063f12dfa7b95b43d97114149831f748b0
dtbo.img for 9.5.4 (flash it by fastboot flash dtbo dtbo.img, don't know if it work on other version)
https://drive.google.com/open?id=1X7W9iyKVy7gmkBjCSght7gy_Sbl4t3Iz
It replaces default 60Hz config with 90Hz one lol
For Warp charge, we need to place "dashd" to somewhere in system and run it:
https://github.com/FlokoROM-GSI/device_phh_treble/commit/1ef10fa131d6e350a2cd00fd25c10b621cbb1d5f
dashd should be added to device_phh_treble, but currently I added it with Magisk Module.
https://drive.google.com/open?id=11eD8CqJmdblfYlLXuiHMIhkxweTD9hzD

AndroPlus said:
I got 90Hz working on my FlokoROM GSI with this dirty hack:
https://github.com/AndroPlus-org/an...mmit/724725063f12dfa7b95b43d97114149831f748b0
dtbo.img for 9.5.4 (flash it by fastboot flash dtbo dtbo.img, don't know if it work on other version)
https://drive.google.com/open?id=1X7W9iyKVy7gmkBjCSght7gy_Sbl4t3Iz
It replaces default 60Hz config with 90Hz one lol
For Warp charge, we need to place "dashd" to somewhere in system and run it:
https://github.com/FlokoROM-GSI/device_phh_treble/commit/1ef10fa131d6e350a2cd00fd25c10b621cbb1d5f
dashd should be added to device_phh_treble, but currently I added it with Magisk Module.
https://drive.google.com/open?id=11eD8CqJmdblfYlLXuiHMIhkxweTD9hzD
Click to expand...
Click to collapse
Very cool! I'm not as tech savvy so could I point to your post in the main one for additional fixes?

maxtreme said:
Very cool! I'm not as tech savvy so could I point to your post in the main one for additional fixes?
Click to expand...
Click to collapse
OK

Legend! I managed to get havoc up and running. There is a OOS camera magisk port in the op6 forum I used and updated the camera to current one plus version and its working well. Front can doesn't work as you know.
Most things are working fine for me at the moment. No real issues yet
Camera quality is poor, but I'm not that fussed by it at the moment. Just want to play!
Thanks heaps for the guide.
---------- Post added at 09:54 AM ---------- Previous post was at 09:54 AM ----------
AndroPlus said:
I got 90Hz working on my FlokoROM GSI with this dirty hack:
https://github.com/AndroPlus-org/an...mmit/724725063f12dfa7b95b43d97114149831f748b0
dtbo.img for 9.5.4 (flash it by fastboot flash dtbo dtbo.img, don't know if it work on other version)
https://drive.google.com/open?id=1X7W9iyKVy7gmkBjCSght7gy_Sbl4t3Iz
It replaces default 60Hz config with 90Hz one lol
For Warp charge, we need to place "dashd" to somewhere in system and run it:
https://github.com/FlokoROM-GSI/device_phh_treble/commit/1ef10fa131d6e350a2cd00fd25c10b621cbb1d5f
dashd should be added to device_phh_treble, but currently I added it with Magisk Module.
https://drive.google.com/open?id=11eD8CqJmdblfYlLXuiHMIhkxweTD9hzD
Click to expand...
Click to collapse
Will floko be updated with the op7 stuff you fix?

miffymiffy said:
Legend! I managed to get havoc up and running. There is a OOS camera magisk port in the op6 forum I used and updated the camera to current one plus version and its working well. Front can doesn't work as you know.
Most things are working fine for me at the moment. No real issues yet
Camera quality is poor, but I'm not that fussed by it at the moment. Just want to play!
Thanks heaps for the guide.
---------- Post added at 09:54 AM ---------- Previous post was at 09:54 AM ----------
Will floko be updated with the op7 stuff you fix?
Click to expand...
Click to collapse
I'll add it at the weekend (with June security patch)

Great walkthrough! Two questions, any way to flash treble ROMs in twrp for us? and how do you think we could get erfanoabdi's android q gsi that's ported from the pixel to work on the device?

eqbirvin said:
Great walkthrough! Two questions, any way to flash treble ROMs in twrp for us? and how do you think we could get erfanoabdi's android q gsi that's ported from the pixel to work on the device?
Click to expand...
Click to collapse
+1 to this.

What are treble ROMs and how does this benefit my use?... Is it different from a custom ROM?

i have tried every gs rom by erfan for this non eof them work all stuck at boot logo
maybe permissive issue which has to be flashed in A partion rom
eqbirvin said:
Great walkthrough! Two questions, any way to flash treble ROMs in twrp for us? and how do you think we could get erfanoabdi's android q gsi that's ported from the pixel to work on the device?
Click to expand...
Click to collapse

mlock420 said:
What are treble ROMs and how does this benefit my use?... Is it different from a custom ROM?
Click to expand...
Click to collapse
Treble ROMs can be used on any project treble supported phone

Treble roms? Do you mean gsi's?

lichtblitz said:
Treble roms? Do you mean gsi's?
Click to expand...
Click to collapse
Exactly that is
---------- Post added at 12:47 PM ---------- Previous post was at 12:46 PM ----------
mlock420 said:
What are treble ROMs and how does this benefit my use?... Is it different from a custom ROM?
Click to expand...
Click to collapse
It's a custom ROM, but the thing is you can flash it on literally any device with Project Treble support

Someone succeded to flash q6 gsi?
I tried the guide on the op but its stuck on the bootscreen like forever :\
@maxtreme

Kookitza said:
Someone succeded to flash q6 gsi?
I tried the guide on the op but its stuck on the bootscreen like forever :\
@maxtreme
Click to expand...
Click to collapse
Tried it before as well and no success. Q beta uses different kernel or sth so it won't work

maxtreme said:
Tried it before as well and no success. Q beta uses different kernel or sth so it won't work
Click to expand...
Click to collapse
Do you think that when open beta will release by OnePlus, the gsi should work on our device?

Kookitza said:
Do you think that when open beta will release by OnePlus, the gsi should work on our device?
Click to expand...
Click to collapse
I guess so
Maybe try using vbmeta and boot from the Q beta released by OP

Anyone able to get gsi working on 9.5.11?
I cant get havoc to work and wondering if that may be why

I'm not sure why you would bother flashing things like Havoc treble rom when the official Havoc rom is available for OP7 pro?

I tried flashing many gsi but all stuck at boot animation .. any solution for this?

Anyone knows how to flash gsi roms on this device?

I tried to flash different gsi images and always get bootlop to fastboot mode.

jlorf7 said:
I tried to flash different gsi images and always get bootlop to fastboot mode.
Click to expand...
Click to collapse
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.

jlorf7 said:
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.
Click to expand...
Click to collapse
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks

rajnathr said:
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks
Click to expand...
Click to collapse
I know but with aonly always boot to fastboot mode, check in this it shows ab https://github.com/phhusson/treble_experimentations/wiki
I posted a mini guide in another thred: https://forum.xda-developers.com/showthread.php?p=80641265
Enviado desde mi NX629J mediante Tapatalk

I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!

Irwan Fauzi said:
I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!
Click to expand...
Click to collapse
This Friday hope I will be testing maximum no. of GSI image and will be posting which boots and working better for Redmagic 3 in a separated thread for discussion with the community.
Also will backup such as Game launcher, LED Strip and other important app using titanium backup and will try to install as system to check if they are working or not.

Just flash the Chinese rom then flash TWRP and then go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development and pick any rom you want some of them even have GAPPS included
---------- Post added at 04:37 PM ---------- Previous post was at 04:31 PM ----------
If you're having trouble with GAPPS follow this steps
1) Boot into TWRP
2) Flash latest GSI img
3) Resize system file system (necessary on my device otherwise gapps will not install)
- Wipe -> Advanced -> select system -> resize file system
4) Flash pico or mini or aroma which ever you want gapps zip
6) Flash magisk zip
7) reboot

every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you try ab version?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???

Irwan Fauzi said:
Did you try ab version?
Click to expand...
Click to collapse
yes
suzook said:
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???
Click to expand...
Click to collapse
yes, yes and yes

I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Do you mind testing if game space work?

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.

Irwan Fauzi said:
Do you mind testing if game space work?
Click to expand...
Click to collapse
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
vimalrajan1988 said:
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.
Click to expand...
Click to collapse
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.

Red magic 3 treble
That's the thing with this phone. Everything is random. I did use the repair tool and flashed the latest global version. But I am unable to flash the gsi again. It keeps getting stuck in fastboot screen. But if I select recovery from fastboot. It does goes to twrp recovery. But nothing after that. I hope someone can make a custom rom with Nubia launcher.

Red magic NEEDS to provide us with fastboot images...We have no real way to recover from a semi brick WTF!

h4cxxc0r3 said:
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.
Click to expand...
Click to collapse
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.

Irwan Fauzi said:
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.
Click to expand...
Click to collapse
What app did you use to covert the .br file? Trying to make fastboot .IMG files.

suzook said:
What app did you use to covert the .br file? Trying to make fastboot .IMG files.
Click to expand...
Click to collapse
I use termux app from play store.. There's a guide on xda how to extract system.dat.br without pc.. link