Same Firmwareupdate since Weeks - Huawei P20 Pro Questions & Answers

Hi,
since Weeks i am having an annoying problem:
the Same update is coming, and i tried everything:
Install the Update approx 20 times
Check in Hicare -no update
Check in Hisuite - NO update
Email Huwai - No answer
Hard Restet (!) - Same
I have read that sometimes a newer update pops up, or with hisuite theres a new update, but always the same.
Any ideas?

I didn´t have the same problem but for me it was that I never got the 9.1 update.
Changing to another operators SIM-card triggered the update, and then after updating to the most recent version I switched back to my default sim.
Maybe it´s the solution to your problem as well, might be worth a shot at least.

This i tried also when the 9.1 update didnt come. Did not work for me. But i will give it again a try

Did not work, also via erecovery (official) , get an error

I had that problem when I did update via moded HiSuite from 9.0.0.286 to 9.1.0.325... I downgraded again to 2.0.0.286 and then I updated first to 9.1.0.311 (no problem), and after that to 9.1.0.328
So try if you want, but I'm not responsible if something goes wrong...
Link for procedure...
https://forum.xda-developers.com/to...-finder-team-mt-t3469146/page144#post79988916

Can someone help me, im getting crazy.
I´ve tried it on 3 different pc´s, at home, in my company... Always the same.
Changed hosts file
installed hisuite and copied the modified files
opened ff on my p20 pro, approved .328 update
does not work, error.
Am i doing something wrong still?
I can download the update in ff, is there a risk to install it this way?

MeisterGigi said:
Can someone help me, im getting crazy.
I´ve tried it on 3 different pc´s, at home, in my company... Always the same.
Changed hosts file
installed hisuite and copied the modified files
opened ff on my p20 pro, approved .328 update
does not work, error.
Am i doing something wrong still?
I can download the update in ff, is there a risk to install it this way?
Click to expand...
Click to collapse
Have you changed the DNS in your wifi connection? Check out the box for IPV6, disconnect the internet, connect again and make sure that your mobile and Laptop are connected with the same network, you just need to change the DNS in your host file, nothing more, good luck.

Aaaah, i finally made it, wlan router with the dns settings did the trick, this was not mentioned in the manual i think?
Happy now
Thanks

Related

[HELP] Wi-Fi problem after mm update- SM_9208

My note 5 is the duos version, imported in Romania from Taiwan (SM_9208) After updating to Marshmallow yesterday, everything worked fine except for on thing: it doesn't find my Wi-Fi network from home anymore and the only way I can connect to it is by going to,, add network " and manually inserting the ssid and PASSWORD because it doesn't appear on the available networks list. Thst means that every time I turn my wireless off and then on, I have to repeat that process.
I haven't had the chance to try any other WiFi network, but I tried with other phones to connect to the network and they found it and connected to it without any problem. Furthermore, any third party app like WiFi analyser is able to see the network.
Do you guys have any idea how I could possibly solve this?
Thank you and have a wonderful day!
Try to backup your phone and then do a factory reset.
I factory reset after update OTA and everything work perfect.
uhm... does n9208 has update for MM already? if you have links kindly share tnx in advance
I tried doing the factory reset and it still has that problem.
And I did receive the update yesterday through OTA.
Other suggestions? Thank you, guys!
flavius222 said:
I tried doing the factory reset and it still has that problem.
And I did receive the update yesterday through OTA.
Other suggestions? Thank you, guys!
Click to expand...
Click to collapse
First, try clearing the cache again. If it still does not work, the update may have downloaded improperly so some file are corrupted. It will continue to use the same corrupted files even if you reset. Have your tried flashing the stock Taiwan Rom using Odin?
//LATER EDIT: I finally made it work by simply changing the wireless network's name. For some reason, my phone wouldn't find the network with its default name.

P20 Pro Does not Update from CLT-L04 8.1.0.107(C792) to ...109

My new P20 Pro (Canadian Telus) is having issues updating to CLT-L04 8.1.0.109(C792) from CLT-L04 8.1.0.107(C792).
The Problem is that the device simply will not update no matter the method.
My device is unrooted at this point.
What Happens.
When going through each of the scenarios,
1) The firmware is downloaded,
2) The phone then boots into firmware installation mode,
3) Firmware supposedly is updated
4) Phone Boots
5) Upon checking in phone status the phone is still on CLT-L04 8.1.0.107(C792)
Methods I have Used to Update
A) OTA Update (result: not updated)
B) Factory reset the device and then trying to OTA Update. (result: not updated)
C) Update via HiSuite (result: not updated)
At this point, I am unsure why this is happening and how I can update to the new firmware.
Any advice or guidance is greatly appreciated!
Did you factory reset? After the last attempt? Is your bootloader unlocked? Have you tried eRevovery?
I have the same issue: new P20 Pro from Koodo (single SIM version), out of the box it prompted me to update, after I did this, I had for example a corrupted Settings app (name was a mix of letters and numbers and same name corruption with Chinese characters within). After this happened I did a factory reset, was back on 107 and was prompted to update again in the morning, which I did. Same outcome as above, after apparently successful installation and restart, I was still on 107 ...
Just got off a chat with Huawei Canada and apparently technicians are aware of the issue and are working on a hot fix that should resolve the update issue.
ccwestcliff said:
I have the same issue: new P20 Pro from Koodo (single SIM version), out of the box it prompted me to update, after I did this, I had for example a corrupted Settings app (name was a mix of letters and numbers and same name corruption with Chinese characters within). After this happened I did a factory reset, was back on 107 and was prompted to update again in the morning, which I did. Same outcome as above, after apparently successful installation and restart, I was still on 107 ...
Click to expand...
Click to collapse
You issues are very similar to mine.
I also had a corrupted settings app as well (mix of letters and numbers with Chinese characters)
Still no fix for the 107 to 109 update to report on.
So I had a chat session with a rep on Huawei Canada's site, he mentioned that my phone was 'Not Ready' for the update and hence why it was not updating.
I opted into an email notification through the rep for when the update becomes available.
I would recommend anyone else with this issue to bring it up to Huawei Canada and opt into a notification when the issue is resolved.
aglbz said:
So I had a chat session with a rep on Huawei Canada's site, he mentioned that my phone was 'Not Ready' for the update and hence why it was not updating.
I opted into an email notification through the rep for when the update becomes available.
I would recommend anyone else with this issue to bring it up to Huawei Canada and opt into a notification when the issue is resolved.
Click to expand...
Click to collapse
Well, given the corrupted Settings app that I (and seemingly others) had, I would say that "not ready" is rep speak for "we screwed up, please wait until we fix it" ...
Was delighted to see that CLT-L04 8.1.0.111(C792) showed up as update on my phone this morning and I hit the install button right away. Sadly (and really really annoyingly) the behaviour is the same as with the 109 update: the update seems to work but after restart the Settings app is corrupted and system shows still to be on 107. Immediately after the restart I was told to update to 111 which I tried once more, only to got a "Update couldn't be installed" fail message.
I then downloaded 111 again, wiped the cache partition and tried another installation. This time, the installation happened a lot faster (given the amount of update data, unrealistically fast) and I got the Update success message again. However, upon restart, I was still on 107 - this is pathetic!
Just to add to this story, I had to send my phone in for repair and apparently (according to repair report) the mainboard was replaced?! I am on .111 now and sincerely hope that future updates will perform as intended ...
ccwestcliff said:
Just to add to this story, I had to send my phone in for repair and apparently (according to repair report) the mainboard was replaced?! I am on .111 now and sincerely hope that future updates will perform as intended ...
Click to expand...
Click to collapse
Why u had to send it to repair?? is it because of the 'Update' not really updating issue? If you got any further solution for this,please let me know. I am also having the same problem.
Has anyone had any success with updates yet? I am still stuck on 107 and it say 114 is ready but always goes back to 107. No updates have installed, had the Telus p20 pro since July .
I haven't had any success yet. This is my last phone from them

p20 pro stuck on firmware (Cant update)

My P20 pro CLT-L29 432 is stuck on 9.0.0.47 and has been for months USB, Hi Suite methods do not work neither has OTG so far bootloader is locked and FRP is locked even after removing google account and resetting the phone
Any Ideas?
I am also stuck on 9.0.0.286 and it doesnt tell me to update from OTA or HISuite..
Also for some reason the update information are missing. It says "no information" instead of " security patch etc"
I also did a factory reset but it didnt help...
Maybe some could give an advice.
same here no info and 9.0.0.286 version in austria
Iv asked huawei service yesterday they say that is no problem and update will be made by imei number and I have to wait so I don't know what to believe
Grazeholder said:
I am also stuck on 9.0.0.286 and it doesnt tell me to update from OTA or HISuite..
Also for some reason the update information are missing. It says "no information" instead of " security patch etc"
I also did a factory reset but it didnt help...
Maybe some could give an advice.
Click to expand...
Click to collapse
no info
patch no information provided
From my observations, if phone is updated through a method other than OTA(Hisuite PC included), there will be no info about update in phone updater. Also, OTA might not work (my phone was stuck on 191 when I bought it second hand, no OTA, but imediately updated to 286 when connected to Hisuite PC. Didn't have update info with 191 and still no info with 286. Never received an OTA this whole time)
Didn't receive OTA for 9.1 and force updated using Firmware finder and modded Hisuite(to 311). Still no info after that.
Today Iv contacted huawei and they've said my serial number is ok and they will push send me the update. Iv tried all methods FF patched hisuit to instal no success.
dejandoggy1 said:
Today Iv contacted huawei and they've said my serial number is ok and they will push send me the update. Iv tried all methods FF patched hisuit to instal no success.
Click to expand...
Click to collapse
Let us know if that will work so i can try do the same and contact them
any luck?
How did you contact Huawei? I used the website a few weeks ago but never got a reply.
Iv contacted Huawei from Hicare app tells you in which huawei centar can you call and you can also chat online with them. Try from hicare app quick services
fatgit said:
How did you contact Huawei? I used the website a few weeks ago but never got a reply.
Click to expand...
Click to collapse
dejandoggy1 said:
Today Iv contacted huawei and they've said my serial number is ok and they will push send me the update. Iv tried all methods FF patched hisuit to instal no success.
Click to expand...
Click to collapse
dejandoggy1 said:
same here no info and 9.0.0.286 version in austria
Iv asked huawei service yesterday they say that is no problem and update will be made by imei number and I have to wait so I don't know what to believe
Click to expand...
Click to collapse
dejandoggy1 said:
Iv contacted Huawei from Hicare app tells you in which huawei centar can you call and you can also chat online with them. Try from hicare app quick services
Click to expand...
Click to collapse
did they push a update?
Tonight received by regular OTA in Austria
I contacted Huawei support via Hicare app (Chat) and told them that I didn't received any OTA update since April security patch this year, the last update I did was via Hisuit from 9.0.0.270 to 9.0.0.286 (which was my/Hisuit mistake because the update was not planned for my device) CLT-L09C432, and I didn't get any OTA since then.
I was told through phone call, after receiving information via Remote Smart Diagnostic, that they have informed the Huawei software development department about the problem, and I should get my update during this week.
I waited till Wednesday but nothing happened, then I backed up all my data via Hisuit, downgraded to 9.0.0270 via Firmware Finder Hisuit (Hacked version ) did a factory reset.
After logging in got notification for 9.0.0.293 did the update successfully, after the update got notification for update to 9.1.0.311, again did updated successfully, and last after the update got notification for update to 9.1.0.328 (August security patch) also installed successfully, and phone is running smoothly.
So who else is stuck on the 9.0.0.286 or older version this might do some trick with updating the phone via OTA eventually.
Have a nice day.
Just my 2 Cents.
sPEADy said:
I contacted Huawei support via Hicare app (Chat) and told them that I didn't received any OTA update since April security patch this year, the last update I did was via Hisuit from 9.0.0.270 to 9.0.0.286 (which was my/Hisuit mistake because the update was not planned for my device) CLT-L09C432, and I didn't get any OTA since then.
I was told through phone call, after receiving information via Remote Smart Diagnostic, that they have informed the Huawei software development department about the problem, and I should get my update during this week.
I waited till Wednesday but nothing happened, then I backed up all my data via Hisuit, downgraded to 9.0.0270 via Firmware Finder Hisuit (Hacked version ) did a factory reset.
After logging in got notification for 9.0.0.293 did the update successfully, after the update got notification for update to 9.1.0.311, again did updated successfully, and last after the update got notification for update to 9.1.0.328 (August security patch) also installed successfully, and phone is running smoothly.
So who else is stuck on the 9.0.0.286 or older version this might do some trick with updating the phone via OTA eventually.
Have a nice day.
Just my 2 Cents.
Click to expand...
Click to collapse
How did u do the hisuite method
TheDevGuy9497 said:
How did u do the hisuite method
Click to expand...
Click to collapse
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/page144 have a look at that, it's very clear and self explanatory, good luck.
sPEADy said:
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/page144 have a look at that, it's very clear and self explanatory, good luck.
Click to expand...
Click to collapse
i just get "failed to update"
I'm stuck on 311. Asks me to update everyday also at the end it says patched 01. I'm on 9.1 now but I've not noticed any changes from emui 8. Nothing sticks out, nothing has improved. I'm thinking it's not installed the firmware which was around 400mb because it takes less than 1 minute to download then less than a minute to install. Once it's installed, it asks to download and install again, every day for 2 months. I don't have access to a pc anyone help with this? Or how can I install beta 10 emui in the UK

[SOLVED] Stuck on EMUI 8.1 after repairing the Device

//check post 13 and 14 for two solutions
Hi I'm in a strange situation after the phone has been repaired in a Huawei center: my phone comeback with another motherboard and with an Old EMUI 8.1.0.163 version based on Android 8 with July 2019 security patch and since a new IMEI all my Ota updates got lost.
I've waited 3 weeks and no Ota update comes, nothing also with official Hisuite. I checked on FF but the first strange thing: almost every build after mine are already approved 9.1.341 / 345 / 346 / 351 / 361. Every builds says "approved" except for: 9.1.0.311 . This is the one immediately after mine (I repeat 8.1.0.163) and it's the basically the only one "not approved".
So I thought "maybe if I force the .311 update I'll get all the other builds by OTA" and then tried with the DLOAD method (that I already used in past) with THIS FIRMWARE. Nothing to do, it start but get "Software instal failed. Incompatibility with current version" that is very strange because firmware is correct.
Since I didn't found any other rom newer flashable with Dload method I opted for Plan B and tried with the modded Hisuite app. Tried firstly with .311 build, it start the dowload and all, put in the phone but when boot in recovery it's lock at 5% and then after a while said "update error" and reboot without installing it.
For the last things I tried still with modded Hisuite but with different builds (345, 351 and 361) but for none of these the download start (both full package and ota). Hisuite found the updates but when I press download it says "no connection" and also it didn't show the changelog (like it did with the .311). Tried Also few build newer than mine that are EMUI 9.0 and not 9.1 thought maybe I've to pass before from the 9.0 to get the 9.1 but same (no changelog + connection error)
In the end what did you suggest except "wait for OTA"? Is there somewhere newer builds (like .345) flashable with Dload method? Or a "fix" for Hisuite builds with the "no connection error" and with no changelog?
Thanks in Advance
Screenshot of mine build and FF:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you change the dns in your computer? As the tutorial of hisuite nodded said? The host file
Albe95 said:
Hi I'm in a strange situation after the phone has been repaired in a Huawei center: my phone comeback with another motherboard and with an Old EMUI 8.1.0.163 version based on Android 8 with July 2019 security patch and since a new IMEI all my Ota updates got lost.
I've waited 3 weeks and no Ota update comes, nothing also with official Hisuite. I checked on FF but the first strange thing: almost every build after mine are already approved 9.1.341 / 345 / 346 / 351 / 361. Every builds says "approved" except for: 9.1.0.311 . This is the one immediately after mine (I repeat 8.1.0.163) and it's the basically the only one "not approved".
So I thought "maybe if I force the .311 update I'll get all the other builds by OTA" and then tried with the DLOAD method (that I already used in past) with THIS FIRMWARE. Nothing to do, it start but get "Software instal failed. Incompatibility with current version" that is very strange because firmware is correct.
Since I didn't found any other rom newer flashable with Dload method I opted for Plan B and tried with the modded Hisuite app. Tried firstly with .311 build, it start the dowload and all, put in the phone but when boot in recovery it's lock at 5% and then after a while said "update error" and reboot without installing it.
For the last things I tried still with modded Hisuite but with different builds (345, 351 and 361) but for none of these the download start (both full package and ota). Hisuite found the updates but when I press download it says "no connection" and also it didn't show the changelog (like it did with the .311). Tried Also few build newer than mine that are EMUI 9.0 and not 9.1 thought maybe I've to pass before from the 9.0 to get the 9.1 but same (no changelog + connection error)
In the end what did you suggest except "wait for OTA"? Is there somewhere newer builds (like .345) flashable with Dload method? Or a "fix" for Hisuite builds with the "no connection error" and with no changelog?
Thanks in Advance
Screenshot of mine build and FF:
Click to expand...
Click to collapse
Luis2k33-XDA said:
Did you change the dns in your computer? As the tutorial of hisuite nodded said? The host file
Click to expand...
Click to collapse
Yup otherwise mine modded Hi Suite would not have seen the build .311 and all the other builds I've tried. 99% sure about the hostfile need to re check better
I told you that cause when I register the ip of my connection, sometimes I use VPN services, and I got error about connection, but when I am in the right ip everything worked, also try some different 311 firmwares from FF, cause I had the experience that when I had one approved but its not for my device I got error in installing it, it stops always in 5%, but if I register another 311 firmware from the list, until I find what works, it can be installed, this is the point now with the firmwares from FF, I recommend to you to install Android 9 before 9.1
Albe95 said:
Yup otherwise mine modded Hi Suite would not have seen the build .311 and all the others I've tried.
Click to expand...
Click to collapse
You talk about phone or PC when you wrote about the VPN? Also another question: did you see the changelog when you choose a firmware?
I also thought about 9.0 but I don't think there are build based on 9.0. newer than mine. I'm scared of flashing build based on older security patch, highly risk of bootloop
Luis2k33-XDA said:
I told you that cause when I register the ip of my connection, sometimes I use VPN services, and I got error about connection, but when I am in the right ip everything worked, also try some different 311 firmwares from FF, cause I had the experience that when I had one approved but its not for my device I got error in installing it, it stops always in 5%, but if I register another 311 firmware from the list, until I find what works, it can be installed, this is the point now with the firmwares from FF, I recommend to you to install Android 9 before 9.1
Click to expand...
Click to collapse
I said About PC, what I do normally is with the FF app in the phone, I register the firmware I want to update, if it's available, after register in the phone app I go to the pc and connect the phone, and through hisuite modded appears the new update, it's very strange that your phone don't get new updates through Ota, maybe you can speak through hicare with the support about it, sometimes I went back to older firmwares for example if I didn't like the performance I went back and everything works normally
Luis2k33-XDA said:
Did you change the dns in your computer? As the tutorial of hisuite nodded said? The host file
Click to expand...
Click to collapse
I had same problem after mothert repair ,stuck on 8.1.0.163. Find any solution?
TheMax777 said:
I had same problem after mothert repair ,stuck on 8.1.0.163. Find any solution?
Click to expand...
Click to collapse
Had to try the procedure via phone hotspot. If it not work then will try to contact the Hicare assistance as said by Luis
Luis2k33-XDA said:
I said About PC, what I do normally is with the FF app in the phone, I register the firmware I want to update, if it's available, after register in the phone app I go to the pc and connect the phone, and through hisuite modded appears the new update, it's very strange that your phone don't get new updates through Ota, maybe you can speak through hicare with the support about it, sometimes I went back to older firmwares for example if I didn't like the performance I went back and everything works normally
Click to expand...
Click to collapse
Still have to try the hotspot procedure but I've talk with hicare support: nothing to do, since July 2019 they can't no more force Ota update the only way they said to me was to re-send in repairing center. And also they said if I'm stuck on July patch with Android 8 probably I'll never get new update, even if I wait months and months. What a mess...
You can install android 9 through hisuite modded, not the last update for example try 328 firmware, and after that search for new update through EMUI and download 345 firmware that is the last at the moment, and you will have an official Ota firmware, this is what I did the other day after tried 361 firmware and didn't like how works
Albe95 said:
Still have to try the hotspot procedure but I've talk with hicare support: nothing to do, since July 2019 they can't no more force Ota update the only way they said to me was to re-send in repairing center. And also they said if I'm stuck on July patch with Android 8 probably I'll never get new update, even if I wait months and months. What a mess...
Click to expand...
Click to collapse
Luis2k33-XDA said:
You can install android 9 through hisuite modded, not the last update for example try 328 firmware, and after that search for new update through EMUI and download 345 firmware that is the last at the moment, and you will have an official Ota firmware, this is what I did the other day after tried 361 firmware and didn't like how works
Click to expand...
Click to collapse
Ok I'll try thanks buddy. And for your modded Hisuite too you can't read the Changelog while you find for update? Sorry for loosing time just want to figure out if I've all setted correctly.
What I do is register it in the FF app, in the app you can see the change log, register the firmware with the ip of your internet and with hisuite modded everything is easy
https://forum.xda-developers.com/to...-finder-team-mt-t3469146/page144#post79988916
Albe95 said:
Ok I'll try thanks buddy. And for your modded Hisuite too you can't read the Changelog while you find for update? Sorry for loosing time just want to figure out if I've all setted correctly.
Click to expand...
Click to collapse
Albe95 said:
Hi I'm in a strange situation after the phone has been repaired in a Huawei center: my phone comeback with another motherboard and with an Old EMUI 8.1.0.163 version based on Android 8 with July 2019 security patch and since a new IMEI all my Ota updates got lost.
I've waited 3 weeks and no Ota update comes, nothing also with official Hisuite. I checked on FF but the first strange thing: almost every build after mine are already approved 9.1.341 / 345 / 346 / 351 / 361. Every builds says "approved" except for: 9.1.0.311 . This is the one immediately after mine (I repeat 8.1.0.163) and it's the basically the only one "not approved".
So I thought "maybe if I force the .311 update I'll get all the other builds by OTA" and then tried with the DLOAD method (that I already used in past) with THIS FIRMWARE. Nothing to do, it start but get "Software instal failed. Incompatibility with current version" that is very strange because firmware is correct.
Since I didn't found any other rom newer flashable with Dload method I opted for Plan B and tried with the modded Hisuite app. Tried firstly with .311 build, it start the dowload and all, put in the phone but when boot in recovery it's lock at 5% and then after a while said "update error" and reboot without installing it.
For the last things I tried still with modded Hisuite but with different builds (345, 351 and 361) but for none of these the download start (both full package and ota). Hisuite found the updates but when I press download it says "no connection" and also it didn't show the changelog (like it did with the .311). Tried Also few build newer than mine that are EMUI 9.0 and not 9.1 thought maybe I've to pass before from the 9.0 to get the 9.1 but same (no changelog + connection error)
In the end what did you suggest except "wait for OTA"? Is there somewhere newer builds (like .345) flashable with Dload method? Or a "fix" for Hisuite builds with the "no connection error" and with no changelog?
Thanks in Advance
Screenshot of mine build and FF:
Click to expand...
Click to collapse
I found the solution!!!
Install moded hisuite https://forum.xda-developers.com/to...-finder-team-mt-t3469146/page144#post79988916
From FF downgrade to 8.1.0.157 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2943/g1604/v199754/f1/full/update.zip
then Phone automatically updates from OTA 8.1.0.157 to 9.1 xxx
TheMax777 said:
I found the solution!!!
Install moded hisuite https://forum.xda-developers.com/to...-finder-team-mt-t3469146/page144#post79988916
From FF downgrade to 8.1.0.157 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2943/g1604/v199754/f1/full/update.zip
then Phone automatically updates from OTA 8.1.0.157 to 9.1 xxx
Click to expand...
Click to collapse
Found a solution too! Installed this firmware with dload method without issue and got 9.1 finally. Thanks to all

Downgrading with HiSuite (No Internet connection errror)

So i've tried all of the solutions to getting GMS and not had any luck so far unfortunantly.
I've gathered from various forum threads that i need to downgrade from build 11.0.0.168 to something like 10.0.0.xxx, before i can use Googlefier
I can't get HiSuite 10.0.0.510_OVE to work (Get an error on my phone about the app needing location permission, which i can't toggle on anywhere), so i am using HiSuite 11.0.0.510_OVE instead as instructed in a youtube video i found.
I get the software installed on PC+Phone and press "Update" and get no error messages, only a note that i am using the latest version.
Then i run the proxy as described in:
Googlefier - Install GMS on Huawei/Honor
Wecome to Googlefier, After a successful tool for LG G2 and LG G3 owners (AutoRec), but after a long pause, here is something new and I hope useful Googlefier is a simple tool, designed to help you install GMS on your Huawei/Honor device...
forum.xda-developers.com
The proxy runs fine seemingly,
HiSuiteProxy.PNG
drive.google.com
But when i press update now i get the "No internet connection. Please check your network Settings." Error.
I can't find many posts about this issue when i google, except this one:
[SOLUTION] hisuite no internet connection
maybe usefull to someone , guys im trying to rollback my mate 10 to previous emui version using hisuite in windown10 , but it keep pop up "no internet connection" message . trying to find solution everywhere but cant seems to find any solution ...
forum.xda-developers.com
I've tried everything suggested there with no luck. I don't have any anti-virus installed except Windows, and i disabled that entirely for this.
Any ideas on how to fix the "No internet connection" issue would be greatly appreciated.
i get a little bit different problem here, im trying to downgrade my P40 Pro ELS-LGRP4 10.1.0.166 to ELS-LGRP4 10.1.0.131 using hisuite + hisuite proxy combination, hisuite proxy run fine without problem, but when i try to check update from hisuite, it's always show "you're now using the latest official version" without "switch to another version" options.
I already try hisuite from different version (10.1.0.550, 10.0.0.510, 10.0.1.100), and try hisuite proxy from different version (1.8.8(latest), 1.8.6, and bender007 modification), but the result always same, it's always showing "you're now using the latest official version".
this is the steps I already taken to run hisuite proxy before running hisuite:
1. open hisuite proxy
2. fill the Packaget URL box with ELS-LGRP4 10.1.0.131 firmware url from firmware finder, fill the the version box with ELS-LGRP4 10.1.0.131 string from firmware finder; (in another test, i try to fill cust pkg, preload pkg and the version string, tick point version, tick CUST PKG box, tick Preload PKG)
3. patching httpcomponent in hisuite folder
4. run setup
5. open hisuite and connect the phone
but, whatever steps I try, hisuite always show that "you're now using the latest official version" message everytime I checking system update on hisuite
Note:
1. hisuite connection setting already ticked on proxy as the hisuite proxy recommended (127.0.0.1, port 7777)
2. already check host file, and it's normal, no hicloud whatsoever
3. no antivirus installed
4. already set windows firewall off
5. already try from different PC
maybe someone can help me too fixing this issue here?
Spoiler: hisuite + hisuite proxy problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I managed to downgrade from EMUI 11 to EMUI 10 without using Proxy now aswell, so i'm down to 10.1.0.176 which is a step in the right direction. But now i run into the exact same issue as you describe "You're now using the latest official version"
After downgrading to 176 version i could actually use the memory card method which hadn't worked before. Got everything installed now, working perfectly (no notifications yet though).
Oh the joy!
I can't find any x.131 firmware on firmware finder and old links all are dead.
someone has a solution for this?
Nicobisgaard said:
After downgrading to 176 version i could actually use the memory card method which hadn't worked before. Got everything installed now, working perfectly (no notifications yet though).
Oh the joy!
Click to expand...
Click to collapse
Which firmware did you install? i tried with C636 from bender007 didn't work for me i got the exact same issue
Nicobisgaard said:
After downgrading to 176 version i could actually use the memory card method which hadn't worked before. Got everything installed now, working perfectly (no notifications yet though).
Oh the joy!
Click to expand...
Click to collapse
congrats dude, I want to try to dload downgrade my device too, but I'm afraid bricking my device if its wrong flashing firmware
can u tell me what firmware did you use? is was just base package firmware? or with cust and preload package?
I had the same issue, could downgrade to 176 using HiSuite then I used the OTG recovery with a firmware I was able to download. Version 121 (els-nx9-10.1.0.121(C432E8R5P2)) as my phone is a C432. Worked like a charm, an OTG adapter is only a couple of £/$ Mine cost £5 for two from Amazon.
kh4lzd said:
i get a little bit different problem here, im trying to downgrade my P40 Pro ELS-LGRP4 10.1.0.166 to ELS-LGRP4 10.1.0.131 using hisuite + hisuite proxy combination, hisuite proxy run fine without problem, but when i try to check update from hisuite, it's always show "you're now using the latest official version" without "switch to another version" options.
I already try hisuite from different version (10.1.0.550, 10.0.0.510, 10.0.1.100), and try hisuite proxy from different version (1.8.8(latest), 1.8.6, and bender007 modification), but the result always same, it's always showing "you're now using the latest official version".
this is the steps I already taken to run hisuite proxy before running hisuite:
1. open hisuite proxy
2. fill the Packaget URL box with ELS-LGRP4 10.1.0.131 firmware url from firmware finder, fill the the version box with ELS-LGRP4 10.1.0.131 string from firmware finder; (in another test, i try to fill cust pkg, preload pkg and the version string, tick point version, tick CUST PKG box, tick Preload PKG)
3. patching httpcomponent in hisuite folder
4. run setup
5. open hisuite and connect the phone
but, whatever steps I try, hisuite always show that "you're now using the latest official version" message everytime I checking system update on hisuite
Note:
1. hisuite connection setting already ticked on proxy as the hisuite proxy recommended (127.0.0.1, port 7777)
2. already check host file, and it's normal, no hicloud whatsoever
3. no antivirus installed
4. already set windows firewall off
5. already try from different PC
maybe someone can help me too fixing this issue here?
Spoiler: hisuite + hisuite proxy problem
View attachment 5236569View attachment 5236567
Click to expand...
Click to collapse
I have the same problem. Did you try sdcard method? My P40 pro is 10.1.0.176.
gnasher666 said:
I had the same issue, could downgrade to 176 using HiSuite then I used the OTG recovery with a firmware I was able to download. Version 121 (els-nx9-10.1.0.121(C432E8R5P2)) as my phone is a C432. Worked like a charm, an OTG adapter is only a couple of £/$ Mine cost £5 for two from Amazon.
Click to expand...
Click to collapse
I am 176 and c432. Will try the OTG method. Thank you
gnasher666 said:
I had the same issue, could downgrade to 176 using HiSuite then I used the OTG recovery with a firmware I was able to download. Version 121 (els-nx9-10.1.0.121(C432E8R5P2)) as my phone is a C432. Worked like a charm, an OTG adapter is only a couple of £/$ Mine cost £5 for two from Amazon.
Click to expand...
Click to collapse
dload firmware? please post a link.
starbase64 said:
dload firmware? please post a link.
Click to expand...
Click to collapse
Here is the link: https://drive.google.com/file/d/1Bjht-0HIBUSGj84yvyqaiLVzMvcy30Tt/view
Hey guys i was in same boat like others, stuck on 176 firmware, tried this thread and download c134 firmware today, it is for people stuck on C636 i had almost given up
[GUIDE] Fix Broken OTA Updates After Downgrade & Have EMUI 11 With GMS (C636)
Eh maybe i can shoot in a tip here.
I just came from 11.0.0.168. I did this
awais_666 said:
Hey guys i was in same boat like others, stuck on 176 firmware, tried this thread and download c134 firmware today, it is for people stuck on C636 i had almost given up
[GUIDE] Fix Broken OTA Updates After Downgrade & Have EMUI 11 With GMS (C636)
Click to expand...
Click to collapse
What do you mean stuck on c636? c636 is only the region spesification. It has nothing to do with software/firmware. Only thing you need to check is that the software i compatible to your region. 636,432 etc....
Maybe this could help...
I came from 11.0.0.168. I reset my phone and am now running 10.1.0.134 software (432 region) Here is what i did:
1. use hisuite 11 to downgrade to 10.1.0.176.
2. use hisuite 10.x.x.550OVE and firmwarefinder on PC to downgrade to 10.1.0.134 (131)
3. Got error with hisuite proxy (No internet connection)
4. Remember to restart computer after change from hisuite 11 to husuite 10.
5. Now i got "You are using the latest software"
6. Use the register for proxy in firmwarefinder (at the top bar)
7. Update your computer's network connection with the correct DNS from firmware finder.
8. Now hisute proxy/firmware finder should work as before and all the files are there without error.
9. Download over the net with proxy.
10. Voila. 10.1.0.134 is installed.
11. Start from scratch with GMS (googlefier or manual)
(i did manual and use the indonesian file after donating to get no errors and notification even after restart. )
12. A fully working P40 Pro inc. GPS, GMS, Notification, Playstore and no error.
Only Google pay not working due to cts profile "false". Can only be fixed with root.
Hope this help some of you guys.
PS! After updating the correct DNS in your network card og router all the files in firmwarefinder works normally like before.
Stay safe
I successful passed steps 7 and 8.
7. Update your computer's network connection with the correct DNS from firmware finder.
8. Now hisute proxy/firmware finder should work as before and all the files are there without error.
After that HiSuite offers me the wished update (10.1.0.117). When I click update and confirm the privacy settings HiSuite wants to start the update progress by downloading the firmware. I then get an error message that there is no internet connection and the update is aborted.
I tried to play around with the proxy and DNS settings, but no success. Is it because the Team MT downloads are down? Or can anyone else help me with this?
leifstar81 said:
I successful passed steps 7 and 8.
7. Update your computer's network connection with the correct DNS from firmware finder.
8. Now hisute proxy/firmware finder should work as before and all the files are there without error.
After that HiSuite offers me the wished update (10.1.0.117). When I click update and confirm the privacy settings HiSuite wants to start the update progress by downloading the firmware. I then get an error message that there is no internet connection and the update is aborted.
I tried to play around with the proxy and DNS settings, but no success. Is it because the Team MT downloads are down? Or can anyone else help me with this?
Click to expand...
Click to collapse
I did restart my computer and did the prosess over again. Than it worked... Thats all i can say.
Team MT files are not down, they are Just not reachable until you change dns...
fromiOS2Android said:
I did restart my computer and did the prosess over again. Than it worked... Thats all i can say.
Team MT files are not down, they are Just not reachable until you change dns...
Click to expand...
Click to collapse
Thank you for your quick reply. I will try again, but these DNS settings didn't work so far. I changed the IP4 settings in the windows options -> network adapter.
leifstar81 said:
Thank you for your quick reply. I will try again, but these DNS settings didn't work so far. I changed the IP4 settings in the windows options -> network adapter.
Click to expand...
Click to collapse
Same as i did... I did it 2 or three times and then i started downloading you could always try to change the ruter settings instead of the network adapter
fromiOS2Android said:
Same as i did... I did it 2 or three times and then i started downloading you could always try to change the ruter settings instead of the network adapter
Click to expand...
Click to collapse
I tried everything now, multiple computers, changing DNS on the network settings in windows and in the router. Nothing works. Once in between HiSuite offers me the right update, but whenever the download is initiated the connection fails. Anyone has more good hints? Because I am running out of ideas.
I have ordered a OTG cable just in case I cannot make it work. But that still leaves me with the task to find a firmware to download. I thought of the JNY-LGPR2-OVS 10.0.1.136 or 10.0.1.117. Where can I find these?

Categories

Resources