Database Develop

[CAMERA MOD] MIUI Camera with added features

Features:
HDR
Fully Working Manual Mode (Exposure Time, Focus, White Balance, ISO) without losing the Scene mode
Square Mode (Only works on some ROMs)
Full Size Panorama
Slow Motion Video Recording (Set video quality to SD or HD & need good light conditions).
Audio Focus Mode in Video Recording
Camera Torch capture
Quick Snap Mode
Age Stamp in Photo (Front Camera)
Mirror Front Camera
Burst Shoot Count One Time = 100
LED Color Notification
Flash the attached zip through TWRP.

Work on AEX?

no button to change to front camera ?

Alfian Firmansyah said:
Work on AEX?
Click to expand...
Click to collapse
Yes

I have it in the bottom right. Try force stopping the app and deleting data. If that doesn't help try reflashing. Mod should work on all roms.

pavaosk said:
I have it in the bottom right. Try force stopping the app and deleting data. If that doesn't help try reflashing. Mod should work on all roms.
Click to expand...
Click to collapse
Is there any comparison with Google camera? What about your experience?

edall said:
Is there any comparison with Google camera? What about your experience?
Click to expand...
Click to collapse
There's nothing like Google Camera for REDMI 4x

edall said:
Is there any comparison with Google camera? What about your experience?
Click to expand...
Click to collapse
MIUI Camera has a lot more features but Google Camera gives better photo results when properly configured, however Google Camera needs more time to take the photo (assuming you're using HDR+).

Alfian Firmansyah said:
Work on AEX?
Click to expand...
Click to collapse
Works on all roms.

Is there any posibility to get exposure time more than 1/2sec? 6-32sec probably good

pavaosk said:
MIUI Camera has a lot more features but Google Camera gives better photo results when properly configured, however Google Camera needs more time to take the photo (assuming you're using HDR+).
Click to expand...
Click to collapse
The time has greatly reduced in the latest version

tnx bro
i tested this camera on pixel rom v4 and it worked
Please add a fingerprint shutter in the new update like miui rom

Faldi

Thx OP!!! This is the cam app i need! Work well on latest RR ROM!

Suggestions
If can setup pictures saved in SD card Will be perfect.

Using latest RR Remix, installed the app amd it works, however in selfie mode it doesn't show my age?

does it support 720 p slowmo

Hey Guys, i just flashed this mod and it doesn't work
I'm on the newest MIUI GLobal 9.1.1.0 Stable
I'm using Redmi 4x 4/64 if it's matter
I've tried twice still not working
any clues ?

mojikey said:
tnx bro
i tested this camera on pixel rom v4 and it worked
Please add a fingerprint shutter in the new update like miui rom
Click to expand...
Click to collapse
Can You Please Send Me The Link Of Pixel V04 Rom

Not working :/
I'm using LineageOS 14.1-20180110-UNOFFICIAL-santoni and it crashes when I try to take a panoramic photo and can't enable HDR.

New GCam with all cameras working

Hey guys, here the link to the new gcam mod with all 3 cameras working
https://www.celsoazevedo.com/files/android/google-camera/f/changelog710/
(camera app by fu24) Tanks a lot.
you have to active the option on app.
1. open settings
2. go to Aux cameras settings
3 . select "Aux camera switch method" (i put the viewfinder button)
than its only tweak the others options to the best for you.

Main camera

Depth camera

Wide camera

MathePro said:
Hey guys, here the link to the new gcam mod with all 3 cameras working
https://www.celsoazevedo.com/files/android/google-camera/f/changelog710/
(camera app by fu24) Tanks a lot.
you have to active the option on app.
1. open settings
2. go to Aux cameras settings
3 . select "Aux camera switch method" (i put the viewfinder button)
than its only tweak the others options to the best for you.
Click to expand...
Click to collapse
I dont find this option, where is?

Racpu_ said:
I dont find this option, where is?
Click to expand...
Click to collapse
Enable developer options by hitting Settings --> About

Theseusperse said:
Enable developer options by hitting Settings --> About
Click to expand...
Click to collapse
Thanks, but is another problem... the front camera not working.

Racpu_ said:
Thanks, but is another problem... the front camera not working.
Click to expand...
Click to collapse
Yea I saw that but at list it's the first app non official that use the 3 cameras sensors.

MathePro said:
Yea I saw that but at list it's the first app non official that use the 3 cameras sensors.
Click to expand...
Click to collapse
Except of that the most needed sensor doesn't work :good:

Theseusperse said:
Enable developer options by hitting Settings --> About
Click to expand...
Click to collapse
I am not understanding.. how do i enable developer options... I went to settings,about, but there is no option to enable developer options..?

ne_toy said:
Except of that the most needed sensor doesn't work :good:
Click to expand...
Click to collapse
Oh that's very subjective. I never switch to the front can

nandakis4 said:
I went to settings,about, but there is no option to enable developer options..
Click to expand...
Click to collapse
Same as well for me unfortunatly

nandakis4 said:
I am not understanding.. how do i enable developer options... I went to settings,about, but there is no option to enable developer options..
Click to expand...
Click to collapse
Go to settings...
About phone...
Hit some times build number and put your pin.
After go back...
System...
Advanced...
And developer options.
Thats it.

Good job, but is not the definitive camera for our phone. Selfie Camera for the most part of the people is really important.
However an important step for the definitive gcam

MathePro said:
Wide camera
Click to expand...
Click to collapse
Hi!
could you please attach screenshots how can i switch gcam to the wide angle on my mi a3
Thank you

papsr6 said:
Go to settings...
About phone...
Hit some times build number and put your pin.
After go back...
System...
Advanced...
And developer options.
Thats it.
Click to expand...
Click to collapse
These are the instructions to enable developer mode in the phone.
The problem here is that to turn on camera switch in fu24's GCam you should enable the developer option in the app (settings ---> about) but this option is not avaible in the "about" section of the app settings.

The option "Aux cameras settings" does not appear to me

corvonero said:
These are the instructions to enable developer mode in the phone.
The problem here is that to turn on camera switch in fu24's GCam you should enable the developer option in the app (settings ---> about) but this option is not avaible in the "about" section of the app settings.
Click to expand...
Click to collapse
Oh sorry.
I haven t use it.

You need to change your SELinux to Permissive.
It's the only way I found that's working

How to get an working selfie camera?
Enviado de meu Mi A3 usando o Tapatalk

Any option to use secondary camera in gcam?

I have read about changing vendor build prop and using gcam with aux support. But I can't find gcam with aux support. If someone can shed a light on this/is it possible to activate the secondary camera would be helpful.

the_dise has recently launched v4.2 which supports aux switch with the help of magisk module. However the secondary 20mp camera output is just 5mp due to pixel binning

Dr. Joy Das said:
the_dise has recently launched v4.2 which supports aux switch with the help of magisk module. However the secondary 20mp camera output is just 5mp due to pixel binning
Click to expand...
Click to collapse
I've also installed the_dise gcam (he's on 4.3 btw) together with the magisk module but can't seem to switch to the second camera. Does your camera switch has another colour than white?

onimorza said:
I've also installed the_dise gcam (he's on 4.3 btw) together with the magisk module but can't seem to switch to the second camera. Does your camera switch has another colour than white?
Click to expand...
Click to collapse
You have enable auxillary camera in advanced settings. Primary camera setup number by default is 0. Enable telephoto camera and camera number by default should be 2. Restart camera and you will have two white small white buttons to change camera.
And you need to have a magisk module for all of these things to work....so rooted phones with magisk only.
Just stock rom with cam2api enabled won't work.
By the way, parted ways from stock rom. Custom rom rocks

Dr. Joy Das said:
Just stock rom with cam2api enabled won't work.
By the way, parted ways from stock rom. Custom rom rocks
Click to expand...
Click to collapse
I have cam2api and magisk and aux options set but still don't see those buttons.
Stock might be the issue. I'm still on Stock Pie November. Maybe it works on Q, but I was thinking to
convert to custom rom anyway; thinking about pixel experience or lineage os. What are you on so I'm sure gcam works fine?

onimorza said:
I have cam2api and magisk and aux options set but still don't see those buttons.
Stock might be the issue. I'm still on Stock Pie November. Maybe it works on Q, but I was thinking to
convert to custom rom anyway; thinking about pixel experience or lineage os. What are you on so I'm sure gcam works fine?
Click to expand...
Click to collapse
I am actually on Extended UI rom. Gcam works great. No problem. It's a stable rom with Xiaomi parts containing screen vibrance and audio settings which actually is great. Just look for the rom video to get detailed idea. I personally don't like updating rom every 2-3 wks. Instead need a complete stable rom. If you need stable MIUI cam, message me. I have ANX camera luffitys build which is officially now not available. And everything works great in that camera too

Dr. Joy Das said:
I am actually on Extended UI rom. Gcam works great. No problem. It's a stable rom with Xiaomi parts containing screen vibrance and audio settings which actually is great. Just look for the rom video to get detailed idea. I personally don't like updating rom every 2-3 wks. Instead need a complete stable rom. If you need stable MIUI cam, message me. I have ANX camera luffitys build which is officially now not available. And everything works great in that camera too
Click to expand...
Click to collapse
I'm on Pixel Experience for a few days now, no need to install gcam enabler, the_dise version works out of the box, aux enabled through magisk also works now, although the second cam is not worth it, I just wanted to test
And off topic again, damn, why have I waited so long on stock, custom is soo much smoother!

onimorza said:
I have cam2api and magisk and aux options set but still don't see those buttons.
Stock might be the issue. I'm still on Stock Pie November. Maybe it works on Q, but I was thinking to
convert to custom rom anyway; thinking about pixel experience or lineage os. What are you on so I'm sure gcam works fine?
Click to expand...
Click to collapse
How did you find the dmgcaux file? Can you share the link?

ArmanAfridi said:
How did you find the dmgcaux file? Can you share the link?
Click to expand...
Click to collapse
It was in his 4.2 changelog:
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1110/
Or direct link:
https://f.celsoazevedo.com/file/cfiles/gcm1/dmgcaux_v1.zip
But even better, you can download it directly from within his more recent versions:
When the cam is open, click the down facing arrow > click the settings gear > advanced settings > auxiliary buttons > download module

onimorza said:
It was in his 4.2 changelog:
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1110/
Or direct link:
https://f.celsoazevedo.com/file/cfiles/gcm1/dmgcaux_v1.zip
But even better, you can download it directly from within his more recent versions:
When the cam is open, click the down facing arrow > click the settings gear > advanced settings > auxiliary buttons > download module
Click to expand...
Click to collapse
Yes. But when I do that it takes me to a website which gives me a 1000 error code of cloudflare. And I can't find any solution to that issue.

onimorza said:
It was in his 4.2 changelog:
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1110/
Or direct link:
https://f.celsoazevedo.com/file/cfiles/gcm1/dmgcaux_v1.zip
But even better, you can download it directly from within his more recent versions:
When the cam is open, click the down facing arrow > click the settings gear > advanced settings > auxiliary buttons > download module
Click to expand...
Click to collapse
Thanks. By using your link, I successfully downloaded and installed the zip file using MAGISK. But do I have to do anything else? Cause I dont see any option to choose or use both lenses together in the camera app.

ArmanAfridi said:
Thanks. By using your link, I successfully downloaded and installed the zip file using MAGISK. But do I have to do anything else? Cause I dont see any option to choose or use both lenses together in the camera app.
Click to expand...
Click to collapse
When the cam is open, click the down facing arrow > click the settings gear > advanced settings > auxiliary buttons > enable the extra lens from our device.

onimorza said:
When the cam is open, click the down facing arrow > click the settings gear > advanced settings > auxiliary buttons > enable the extra lens from our device.
Click to expand...
Click to collapse
I did enable "Main lens(camera id: 0)", "telephoto lens(camera id: 2)", " wide angle lens(camera id: 3)", " macro lens(camera id: 4), "zoom lens(camera id: 5)
{Mi A2 only has a primary lens which has a 12mp sensor and a secondary lens which has a 20 mp sensor on the rear side, it doesn't have telephoto, wide angle, macro, zoom) but still I enabled all of them, after installing the "dmgcaux_v1.zip" file with MAGISK. and still the camera app doesn't give me any options to switch lenses or use both lenses together, when I capture an image it says it's 12.2mp, in all modes, no matter which I choose (night mode, portrait, camera) it captures a 12.2mp photo. And if I cover the 20mp sensor it doesn't effect the camera at all. So, the app is not using my secondary sensor. And there is no option to activate it after enabling all the auxiliary buttons.

ArmanAfridi said:
I did enable "Main lens(camera id: 0)", "telephoto lens(camera id: 2)", " wide angle lens(camera id: 3)", " macro lens(camera id: 4), "zoom lens(camera id: 5)
{Mi A2 only has a primary lens which has a 12mp sensor and a secondary lens which has a 20 mp sensor on the rear side, it doesn't have telephoto, wide angle, macro, zoom) but still I enabled all of them, after installing the "dmgcaux_v1.zip" file with MAGISK. and still the camera app doesn't give me any options to switch lenses or use both lenses together, when I capture an image it says it's 12.2mp, in all modes, no matter which I choose (night mode, portrait, camera) it captures a 12.2mp photo. And if I cover the 20mp sensor it doesn't effect the camera at all. So, the app is not using my secondary sensor. And there is no option to activate it after enabling all the auxiliary buttons.
Click to expand...
Click to collapse
When I enable those and go back, the camera reboots and gives me the different options just above the regular white circle shoot button. See attached.
What ROM are you on? I couldn't get it to work on stock but now am on Pixel Experience.

onimorza said:
When I enable those and go back, the camera reboots and gives me the different options just above the regular white circle shoot button. See attached.
What ROM are you on? I couldn't get it to work on stock but now am on Pixel Experience.
Click to expand...
Click to collapse
I am on pixel experience too. How do you do that? I don't understand. Do you have to do anything else after installing magisk module and before enabling auxiliary buttons?

ArmanAfridi said:
I am on pixel experience too. How do you do that? I don't understand. Do you have to do anything else after installing magisk module and before enabling auxiliary buttons?
Click to expand...
Click to collapse
Do you still have this download option in your camera app after installing DMGCaux_v1.zip?

ArmanAfridi said:
Do you still have this download option in your camera app after installing DMGCaux_v1.zip?
Click to expand...
Click to collapse
Yes, that remains, even after installing.

onimorza said:
Yes, that remains, even after installing.
Click to expand...
Click to collapse
Is your "the dise" gcam built-in in the pixel experience rom or you installed it manually?

ArmanAfridi said:
I am on pixel experience too. How do you do that? I don't understand. Do you have to do anything else after installing magisk module and before enabling auxiliary buttons?
Click to expand...
Click to collapse
Which version of Pixel Experience? I'm still on 20200416.
Install camera2 probe https://play.google.com/store/apps/details?id=com.airbeat.device.inspector
And report back what hardware support level you have.
---------- Post added at 08:29 AM ---------- Previous post was at 08:28 AM ----------
ArmanAfridi said:
Is your "the dise" gcam built-in in the pixel experience rom or you installed it manually?
Click to expand...
Click to collapse
Manually, it wasn't included yet in the 20200416 PE.

onimorza said:
Which version of Pixel Experience? I'm still on 20200416.
Install camera2 probe https://play.google.com/store/apps/details?id=com.airbeat.device.inspector
And report back what hardware support level you have.
Click to expand...
Click to collapse
I am using the 2020/7/10 version of pixel experience(10 plus) and okay I'll report back in a minute.
---------- Post added at 07:43 AM ---------- Previous post was at 07:33 AM ----------
onimorza said:
Which version of Pixel Experience? I'm still on 20200416.
Install camera2 probe https://play.google.com/store/apps/details?id=com.airbeat.device.inspector
And report back what hardware support level you have.
---------- Post added at 08:29 AM ---------- Previous post was at 08:28 AM ----------
Manually, it wasn't included yet in the 20200416 PE.
Click to expand...
Click to collapse
All 3 of them have level 3 hardware support

How To Guide Camera hidden settings and features

Hi Everyone,
I love the camera of my MI11U. but there are a few tunings that I REALLY HATE!!! one of them is default beautify in selfie and portrait. taking photos of black objects (tried with GCAM which took a perfect shot). and a few minor others.
Searching here and there, I found a way to turn off and on some additional settings like beautify and some other functions. this will help whoever understand all these settings (not me ), so I thought to share this simple method and see your thoughts and outcomes. ***note that there are some settings are in Chinese***.
1 . go to file manager and go to phone storage....
2 . go to DCIM/camera
3 . make a new folder with the name mentioned below....
lab_options_visible
4 .save and exit.....
5 . go to settings and force stop the miui camera app....
6 . now launch the app.....
7 . go to camera settings menu of the app.....you will see new options available in there....
8 . just turn off beautify in portrait mode....
9 . come back....change to selfie mode....tap on the blue star.....now tap on clear.....
Hope this helps everyone to take better photos.
would much appreciate if we can share the benefits of these settings in order to get best results.

Wow, this is amazing. Thx

Hi Hassanaliyeh , which version of gcam do you use?

hassanaliyeh said:
Hi Everyone,
I love the camera of my MI11U. but there are a few tunings that I REALLY HATE!!! one of them is default beautify in selfie and portrait. taking photos of black objects (tried with GCAM which took a perfect shot). and a few minor others.
Searching here and there, I found a way to turn off and on some additional settings like beautify and some other functions. this will help whoever understand all these settings (not me ), so I thought to share this simple method and see your thoughts and outcomes. ***note that there are some settings are in Chinese***.
1 . go to file manager and go to phone storage....
2 . go to DCIM/camera
3 . make a new folder with the name mentioned below....
lab_options_visible
4 .save and exit.....
5 . go to settings and force stop the miui camera app....
6 . now launch the app.....
7 . go to camera settings menu of the app.....you will see new options available in there....
8 . just turn off beautify in portrait mode....
9 . come back....change to selfie mode....tap on the blue star.....now tap on clear.....
Hope this helps everyone to take better photos.
would much appreciate if we can share the benefits of these settings in order to get best results.
Click to expand...
Click to collapse
Thats great ...one Problem i dont Inderstand what are the Settings do...or make

adverglobal said:
Hi Hassanaliyeh , which version of gcam do you use?
Click to expand...
Click to collapse
I am using GCam Wichaya 8.1.101 V1.4
it is not perfect, original xiaomi camera is impressive with all functions and control of device way better than GCam. but GCam is better in some conditions and scenarios like taking a photo of a far black object or photos of people. with Xiaomi, far black objects will be like a void in a photo and no details at all in it, and beautify is so annoying. with GCam, both are better, but colours are less vibrant and saturated.

gorillalaci said:
Thats great ...one Problem i dont Inderstand what are the Settings do...or make
Click to expand...
Click to collapse
gorillalaci said:
Thats great ...one Problem i dont Inderstand what are the Settings do...or make
Click to expand...
Click to collapse
The reason I made this thread is to share experience and understand what exactly they do. I really do not know any other that beautify in portrait disables it for all camera modes and not only portrait.
I found the following over internet by someone tested them on Mi10 devices, and some features are not mentioned or were disabled with previous devices. hope it helps at a start.
Internal magic tools : activates internal tools to improve the quality of photos and videos.
Face detection : the mobile camera can recognize the face and frame it in a box to improve the result.
Hide face detection frame automatically : this option hides the box that appears when activating the previous option but keeps the improvements.
Beautify in Portrait mode : Activate beauty mode in all camera modes.
Turn on dual camera : turn on dual camera to enhance photos.
Turn on dual SAT camera – currently does not have a user function.
Turn on MFNR : when activated, the device takes 6 consecutive shots which when superimposed and eliminate the noise from the photo.
Turn on SR : with this option the resolution of the image is enlarged as if the sensor of the mobile were larger.
Turn on quick shot animation : activate the quick shot animation in the app.

hassanaliyeh said:
The reason I made this thread is to share experience and understand what exactly they do. I really do not know any other that beautify in portrait disables it for all camera modes and not only portrait.
I found the following over internet by someone tested them on Mi10 devices, and some features are not mentioned or were disabled with previous devices. hope it helps at a start.
Internal magic tools : activates internal tools to improve the quality of photos and videos.
Face detection : the mobile camera can recognize the face and frame it in a box to improve the result.
Hide face detection frame automatically : this option hides the box that appears when activating the previous option but keeps the improvements.
Beautify in Portrait mode : Activate beauty mode in all camera modes.
Turn on dual camera : turn on dual camera to enhance photos.
Turn on dual SAT camera – currently does not have a user function.
Turn on MFNR : when activated, the device takes 6 consecutive shots which when superimposed and eliminate the noise from the photo.
Turn on SR : with this option the resolution of the image is enlarged as if the sensor of the mobile were larger.
Turn on quick shot animation : activate the quick shot animation in the app.
Click to expand...
Click to collapse
Thanks for explaining the features.

Thanks for the tip. One of the options I really like to see is the ability to pick the metering type (full frame average, center weighted average or spot metering). Can be quite useful. Seems like center weighted is the default.

hassanaliyeh said:
The reason I made this thread is to share experience and understand what exactly they do. I really do not know any other that beautify in portrait disables it for all camera modes and not only portrait.
I found the following over internet by someone tested them on Mi10 devices, and some features are not mentioned or were disabled with previous devices. hope it helps at a start.
Internal magic tools : activates internal tools to improve the quality of photos and videos.
Face detection : the mobile camera can recognize the face and frame it in a box to improve the result.
Hide face detection frame automatically : this option hides the box that appears when activating the previous option but keeps the improvements.
Beautify in Portrait mode : Activate beauty mode in all camera modes.
Turn on dual camera : turn on dual camera to enhance photos.
Turn on dual SAT camera – currently does not have a user function.
Turn on MFNR : when activated, the device takes 6 consecutive shots which when superimposed and eliminate the noise from the photo.
Turn on SR : with this option the resolution of the image is enlarged as if the sensor of the mobile were larger.
Turn on quick shot animation : activate the quick shot animation in the app.
Click to expand...
Click to collapse
Where those options appears exactly?
I can't find after adding the folder and forcing close camera app

rowihel2012 said:
Where those options appears exactly?
I can't find after adding the folder and forcing close camera app
Click to expand...
Click to collapse
Just go to camera settings and scroll down.

hassanaliyeh said:
Just go to camera settings and scroll down.
Click to expand...
Click to collapse
Yes this way not working with android 12

rowihel2012 said:
Yes this way not working with android 12
Click to expand...
Click to collapse
Seems like you got a different device.

Bart3n said:
Wow, this is amazing. Thx
Click to expand...
Click to collapse
Got it working, not really sure what to change tho....

is it no longer available on android 12?

EvertonnDuarte said:
is it no longer available on android 12?
Click to expand...
Click to collapse
Tried on xiaomi.eu latest weekly and didn't work. There is a modded miui cam in a Telegram group. Can't give TG links since some butthurt people hate me and sharing TG links appears to be against the "rules". Just search up "Sevtinge's Mods". That cam got many more options to tweak for, especially the Leica stuff.

Themes / Apps / Mods GCam Port v8.7

it works.
click here

Is that any better? I tried it and it's closing after every click, and saving only a thumbnail size version of the picture.

BlasFamous said:
Is that any better? I tried it and it's closing after every click, and saving only a thumbnail size version of the picture.
Click to expand...
Click to collapse
make sure that the storage saver option is turned off and camera photo resolution is set to full resolution
also set the interface and model to pixel 3 (blueline)
edit: the app works fine if i change the model; only changing the interface closes the app everytime

kanishk_x0 said:
make sure that the storage saver option is turned off and camera photo resolution is set to full resolution
also set the interface and model to pixel 3 (blueline)
Click to expand...
Click to collapse
Any configs needed? What's working on that version?

philipjan26 said:
Any configs needed? What's working on that version?
Click to expand...
Click to collapse
nope i installed the app and tweaked some basic settings like auto night sight and all but didn't use any config file
also most of the things are working on my device except the top shot option which closes the camera every time i take a picture otherwise video recording, night sight, awb and portrait mode are working just fine

It works fine, but no aux cam detected.