Related
I'm having some problems upgrading my wife's phone. I went to the website with the upgrade instructions, downloaded Kies mini, and installed all of the drivers for the phone. I put the phone in usb debugging mode and plugged it in, but Kies doesn't see the phone. I tried messing around with some settings (i don't remember what I did) and it worked one time. And the one time it did work, it said something like unsupported device and the upgrade phone button was greyed out. I've tried searching everywhere for an answer to no avail. I don't know what I'm doing wrong
Did you use the USB port on the back of the PC?
No, I used one of the ports on the front
What sort of configuration was the phone running before you tried the update. Any customization? Rooted?
no customizations, unrooted
Make sure in the USB setting it of set to Kies (Fireware Update). This is under settings/applications
Sent from my SAMSUNG-SGH-I897 using XDA App
I did that. when I did switch it to kies, it said I had to turn off debugging mode. After i switched it to kies mode, i turned debugging back on. Should I not have done that?
the_KEV said:
I went to the website with the upgrade instructions, downloaded Kies mini, and installed all of the drivers for the phone. I put the phone in usb debugging mode and plugged it in, but Kies doesn't see the phone.
Click to expand...
Click to collapse
May I ask why did you put the phone in debugging mode? You don't need to. You should do what Viper 714 suggested. Have you ever used Kies before this attempt at updating the firmware?
Feel free to PM me and I'd be happy to assist you.
clemmie said:
May I ask why did you put the phone in debugging mode? You don't need to. You should do what Viper 714 suggested. Have you ever used Kies before this attempt at updating the firmware?
Feel free to PM me and I'd be happy to assist you.
Click to expand...
Click to collapse
I have never used kies before this. I didn't think I needed it. The instructions says debugging mode should be enabled.
Captivate Froyo update crash and how to solve
Note my device is an ATT Samsung Captivate S SGHi897
Kies would crash on the update indicating a conflict AMINIFUS.EXE from the AMINIFUSREQLEV component. Also sometimes, kies would not present the upgrade screen althought KIES sees the device memory/drives.
Here's what fixed it for me.
On the device - go to settings / development turn ON USB debuging and turn ON Allow mock locations.
With KIES running - the Capivate USB screen may not appear when you connect your USB cable. But the upgrade screen KIES will appear and start your upgrade.
IF you have a external SD card - remove prior to the update. I was able to update with my external SD card installed but when the device rebooted the device screen would go to black AFTER the ATT and Capivate splash screens and appear to hang. I removed my external card - rebooted the Capivate and the device was able to work this the initial Froyo set up screens - then the external was fine.
Samsung is aware of this problem and fix is not widely known. I person I spoke with at Samsung only discovered this fix on his previous call.
Good luck everyone. Froyo is finally OH and lastly = ATT will be rolling out an over the air update for those who do not want to go through KIEs.
You should definitely remove your SIM and external SD before flashing any new firmware, as a matter of Due Diligence.
I'd give it a try first with it disabled.
Oh yeah I forgot to mention that when the phone is not in debugging mode, the phone says it's connected to kies, but kies says no phone is connected
clemmie said:
You should definitely remove your SIM and external SD before flashing any new firmware, as a matter of Due Diligence.
I'd give it a try first with it disabled.
Click to expand...
Click to collapse
OK I'll try again when my wife gets home with the phone. would it be a good Idea to uninstall everything and start from the beginning?
I did it with usb debugging on. The important part id make sure your in Touchwiz. Otherwise keis will not see the phone.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
shinji257 said:
I did it with usb debugging on. The important part id make sure your in Touchwiz. Otherwise keis will not see the phone.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
did kies automatically see it or did you have do anything after you plugged in your phone?
I suggest using the full KIES application itself opposed to KIESmini.
If you do a quick google search (or even search the forums here) for KIES you will soon come across a download link for the full KIES application.
KIESmini has been known to have issues with 64bit operating systems. So check into that as well.
I run Win7 64bit and I could not get KIESmini to work. It would crash (stopped responding error) every time the device was connected. So I downloaded the full KIES application and the problem was solved... Everything updated fine.
clemmie said:
May I ask why did you put the phone in debugging mode? You don't need to. You should do what Viper 714 suggested. Have you ever used Kies before this attempt at updating the firmware?
Feel free to PM me and I'd be happy to assist you.
Click to expand...
Click to collapse
I had the same problems. Not only do you need to turn on debugging but also allow mock locations.
RaptorOne3 said:
I suggest using the actual KIES program itself opposed to KIESmini.
If you do a quick google search (or even search the forums here) for KIES you will soon come across a download link for the actual KIES application.
KIESmini has been known to have issues with 64bit operating systems. So check into that as well.
Good luck..
Click to expand...
Click to collapse
Unless you modify the built in Access database for Kies, it will not recognize the i897 as a supported device.
Back when I used to check for updates with Kies Mini frequently I always had trouble getting the phone to talk to Kies Mini. What I found worked the best is as follows:
1. Restart the PC
2. Restart the Phone
3. Disable Bluetooth on the phone if it is enabled
4. Put the phone in "Kies (Firmware update)" mode in Settings | Applications | USB Settings
5. Plug the phone into a USB port on the computer that is not on a root hub shared by any other devices (especially a keyboard or mouse).
6. Launch Kies Mini
Step 5 is very important because the phone must negotiate a USB 2.0 connection. I found that steps 1 & 2 were almost always necessary, without a clean boot on both devices, I frequently had problems. Step 3 seemed to help, though sometimes I could get the phone to connect to Kies Mini with Bluetooth enabled. I was able to get it to connect in either Kies "Firmware Update" mode, or USB debug mode. The documentation may specify USB debug mode because Bluetooth has to be disabled for USB debug mode.
I think I got it!! I uninstalled everything. Then I just did what everyone said. Used the back of the PC, made sure the phone what kies mode, with debugging, and mock locations, removed sim card and sd card...but then kies kept crashing. Then I found another post somewhere that said to uninstall IE9. I did that and now its finally working! Thanks yall for your help.
anyway I can add solved to the title?
Kies tried to make a connection to Note but fail. I got error message, can not start service on device, please disconnect then reconnect the device. any help please.
note can connect only to the latest kies version. mine is 2.1.1.11124_17. make sure u have the latest kies version.
even after the latest version, sometimes i had problem connecting to kies.
i first opened the kies application in my pc and then connected the cable to phone. it helped. but occasionally i had the connecting problem.
if you need kies just for a transfer,then try using kies air in your phone.
cheng6991 said:
Kies tried to make a connection to Note but fail. I got error message, can not start service on device, please disconnect then reconnect the device. any help please.
Click to expand...
Click to collapse
Try these steps,
Make sure you are in Stock ROM
Upgrade Kies
Re install USB Drivers in PC
Try with different USB Ports
Try with Different USB Cable
Try this:
With Kies opened and cable connected, shut down the phone, wait until the menu and return buttons close, then restart phone.
I tried 2 computers already.
cheng6991 said:
I tried 2 computers already.
Click to expand...
Click to collapse
Turn Off USB Debugging Mode then try.
Settings > Application > Development >
This should work.
I have tried all the suggestions except that power off the phone then restart it.
cheng6991 said:
I have tried all the suggestions except that power off the phone then restart it.
Click to expand...
Click to collapse
Try with that , if that also dint work , you do factory reset or Odlin Flash to New Update.
Thanks for all the help. I finally got it to work by power down the note then restarted it.
This is latest firmware.
Current firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
latest firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
Is this right
cheng6991 said:
Thanks for all the help. I finally got it to work by power down the note then restarted it.
This is latest firmware.
Current firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
latest firmware version: PDA:KKA/PHONE:KKS/CSC:KK3(XEU)
Is this right
Click to expand...
Click to collapse
Ya may be.. coz different region ll get different version update. in India last update we got KL3
Follow this link see which is the last update for your region
http://forum.xda-developers.com/showthread.php?t=1424997
Mine is a UK note
i think XXLA1 2.3.6 is the final update for your region.. but this update is not available via Kies.
What are you trying to do that requires KIES anyway? If it's for file transfer then just put it into mass storage mind or use KIES air!
ranjan.alva said:
Ya may be.. coz different region ll get different version update. in India last update we got KL3
Follow this link see which is the last update for your region
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
I have experienced the same problem too. But I found a solution in external site. It works!!
where and how did you fix your problem?
Restart
alex fung said:
where and how did you fix your problem?
Click to expand...
Click to collapse
Hi, in my experiance, I had a same problem in this topic. followed this topic. i restarted my Note 1. after that i can connect with Kies easily.
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
SREEPRAJAY said:
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I already done this but the usb won't work and the same cable works with another p990. :crying:
torq1337 said:
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
Click to expand...
Click to collapse
At the moment with Gueste2X_GoodBye-2.0 + gestekrnl 2.1 without oc, baseband 0725.
Did you try to switch mode? From "mass storage" to "mtp"?
amagyar said:
Did you try to switch mode? From "mass storage" to "mtp"?
Click to expand...
Click to collapse
No. How can i try this?
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
Can't enter into this menu usb-connection(pc) when i press menu button nothing happens.. I think we are in the same boat because my phone can't be recognized in apx mode/ sw mode ..
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
The same is happening with my p990 to. I can´t connect to pc with pc connection. To transfer data i use the card reader or with airdroid who it make with wifi.
Others users that had this problem they sent the phone in warranty and Lg have changed their mainboards. So if you have warranty go and solve your problem with your LG shop. It´s seems that is not any solution to solve this annoying problem with this bad hardware
Hello, same problem here. Well, "you need to send it to LG".. but there's one problem. I have MIUI and I can't flash back original ROM without nvflash. How to deal with it?
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
SuperSkill said:
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
Click to expand...
Click to collapse
well at mine don´t works. thank you very much for you solution.
I have the same problem. It's not possible to connect to the phone either by LG tool or as mass storage. I've tried different cables, computers and cleaning the connector in the phone without success. I'm running stock GB.
I would really like to root the phone to be able to flash CM10. Is there any way to do this without USB connection?
Edit: I've already tried NVFlash and SuperOneClick
I had the same problem last weeked and i manage to solve it, im busy right now but I promise i'll tell you how i solved it later today or tomorrow
Sent from my Optimus 2X using xda app-developers app
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Hey hello, I wrote yesterday and told you that I would teach you how to fix this bug, I'm almost done with the tutorial, I had to make all over again so I could tell you step by step, unfortunately, the fix I found is temporal, so, I'm trying one more thing to see if I can make it permanent, and also, i'm wating for Hulk to answer me where to post this fix, 'cuz you're not the only one with this problem, so I think would be better to create a thread with my solution, i'm sorry if I could not give you the instruccions today but I think later today or tomorrow hulk will tell me where to put it, as soon as I post the solution, I'll post here a link to the thread, just wait a bit more
greetings
I just posted my solution, you might want to give it a shot
Look here
http://forum.xda-developers.com/showthread.php?p=33870935#post33870935
Hey, im in Jamaica and ive got a challenge for Captivate users. No one has been able to figure this dilema out. Hopefully someone can solve this.
My captivates usb port has stopped doing anything. The details are:
1. The phone works fine and used to be rooted but the root is corrupt i think. Super user installed but the phone behaves unrooted and SU gives errors.
2. I cant flash ROMs since there is no usb.
3. Cannot sideload as the phone cant receive the AT&T OTA update since im in Jamaica.
4. I changed the USB port but same result (no charge, no connection to pc)
Im thinking the usb is bricked since the person i got it from says it charged the day before she reset the phone to give to me.
5. Cant update.zip via 3 recovery (i get e: siganture verification failed)
Can anyone figure this out!? Im thinking its impossible now. If only i could use sideload wonder machine wirelessly, then i could use Z4ROOT or Visionary to flash.
Maybe stupid question. But do u have the Samsung USB drivers installed? If yes then probably need a new USB cord. Try a different one.
saintnova said:
Hey, im in Jamaica and ive got a challenge for Captivate users. No one has been able to figure this dilema out. Hopefully someone can solve this.
My captivates usb port has stopped doing anything. The details are:
1. The phone works fine and used to be rooted but the root is corrupt i think. Super user installed but the phone behaves unrooted and SU gives errors.
2. I cant flash ROMs since there is no usb.
3. Cannot sideload as the phone cant receive the AT&T OTA update since im in Jamaica.
4. I changed the USB port but same result (no charge, no connection to pc)
Im thinking the usb is bricked since the person i got it from says it charged the day before she reset the phone to give to me.
5. Cant update.zip via 3 recovery (i get e: siganture verification failed)
Can anyone figure this out!? Im thinking its impossible now. If only i could use sideload wonder machine wirelessly, then i could use Z4ROOT or Visionary to flash.
Click to expand...
Click to collapse
You went through this thread yet? http://forum.xda-developers.com/showthread.php?t=1953930
1. Ive tried several usb cables but no response.
2. If the phone wont even charge via usb then im not sure installing the drivers will help.
3. Whats the jig supposed to do? Get me into download? If so, when i hold the volume buttons and power button, it takes me to a screen that gives me the options to clear cache, user data, and reinstall packages. but when i try various update.zip files i get the signed verification failed message. I think this is recovery mode but ill search for how to get into download mode. Does download mode work without usb?
Tried entering download mode but i guess since the usb doesnt work, thats why it doesnt function.
saintnova said:
1. Ive tried several usb cables but no response.
2. If the phone wont even charge via usb then im not sure installing the drivers will help.
3. Whats the jig supposed to do? Get me into download? If so, when i hold the volume buttons and power button, it takes me to a screen that gives me the options to clear cache, user data, and reinstall packages. but when i try various update.zip files i get the signed verification failed message. I think this is recovery mode but ill search for how to get into download mode. Does download mode work without usb?
Tried entering download mode but i guess since the usb doesnt work, thats why it doesnt function.
Click to expand...
Click to collapse
If the phone doesn't charge through the usb, you need a new usb port on your phone. If you know how to solder, you can probably get one for cheap and look at videos on how to do it. Otherwise, you can go through mobiletechvideos.com to get it replaced.
As for download mode, it's vol down + power.
BWolf56 said:
If the phone doesn't charge through the usb, you need a new usb port on your phone. If you know how to solder, you can probably get one for cheap and look at videos on how to do it. Otherwise, you can go through mobiletechvideos.com to get it replaced.
As for download mode, it's vol down + power.
Click to expand...
Click to collapse
The usb port was changed but the result was the same. All this happened after the person wiped the phone before i got it. Before that the usb port worked fine. Trying to put it into download mode now but a question again is, will it work if the usb port doesnt work?
Tried volume down + power but phone just boots as normal.
Im on froyo 2.2
saintnova said:
The usb port was changed but the result was the same. All this happened after the person wiped the phone before i got it. Before that the usb port worked fine. Trying to put it into download mode now but a question again is, will it work if the usb port doesnt work?
Tried volume down + power but phone just boots as normal.
Im on froyo 2.2
Click to expand...
Click to collapse
The other way to fix this would be sideloading but ATT doesnt allow the OTA where im at. Anyway to upload Z4root quickly to googleplay then download it? LOL. My phone only allows apps from google play.
saintnova said:
The other way to fix this would be sideloading but ATT doesnt allow the OTA where im at. Anyway to upload Z4root quickly to googleplay then download it? LOL. My phone only allows apps from google play.
Click to expand...
Click to collapse
There's a security feature, you can uncheck it in your settings.
And holding vol down+power while phone is off will boot it in download mode (don't have the usb plugged in). Also, formatting and resetting a phone doesn't break usb. My guess, the job wasn't done correctly.
Have you tried it on other pc? Perhaps your pc usb port is defective.
BWolf56 said:
There's a security feature, you can uncheck it in your settings.
And holding vol down+power while phone is off will boot it in download mode (don't have the usb plugged in). Also, formatting and resetting a phone doesn't break usb. My guess, the job wasn't done correctly.
Have you tried it on other pc? Perhaps your pc usb port is defective.
Click to expand...
Click to collapse
1. There isnt any such setting on the ATT version of my captivate. I guess that option came after the sideload OTA update.
2. I hold the volume down button and the power when the phone is off but it just boots up as normal. No download mode. Is there a site that keeps update.zips or OTA update that can be pushed?
saintnova said:
1. There isnt any such setting on the ATT version of my captivate. I guess that option came after the sideload OTA update.
2. I hold the volume down button and the power when the phone is off but it just boots up as normal. No download mode. Is there a site that keeps update.zips or OTA update that can be pushed?
Click to expand...
Click to collapse
1. I though I remembered being able to sideload back then (it has been a while) but could be wrong.
2. Not with the signature verification. You'd need a custom recovery (cwm).
Getting in download mode is something that always works (unless you mess up with the bootloaders = bricked phone), just like getting in recovery. It's something that comes with the phone.
Basically, not much can be done on the Captivate without a working usb.
BWolf56 said:
1. I though I remembered being able to sideload back then (it has been a while) but could be wrong.
2. Not with the signature verification. You'd need a custom recovery (cwm).
Getting in download mode is something that always works (unless you mess up with the bootloaders = bricked phone), just like getting in recovery. It's something that comes with the phone.
Basically, not much can be done on the Captivate without a working usb.
Click to expand...
Click to collapse
Any other suggestions with the download mode? I can get into recovery 100% of the time but the vol down + power just turens on the phone. Anyway to get a rooting app from google play? or bypass apk block? Is there anyway to update from att over wifi? I can check for update on the phone but it just hangs there. Guess its cuz im not in the states. Respect though!! If u figure out anything else to try let me know. Bless!!
A way to sideload apps without USB is to download the Google Drive app from the Play Store then upload the APK from your computer to your Drive. Next access your Drive on your phone and select the APK it should begin the regular install.
**you will need to allow 3rd party applications**
guidostein said:
A way to sideload apps without USB is to download the Google Drive app from the Play Store then upload the APK from your computer to your Drive. Next access your Drive on your phone and select the APK it should begin the regular install.
**you will need to allow 3rd party applications**
Click to expand...
Click to collapse
Trying that now. What do i need to do to allow 3rd party apps? Will it just ask me?
Damn!! the third party thing is the same thing that blocks me from installing apps normally! Damn Google/ATT monopoly!!
saintnova said:
Trying that now. What do i need to do to allow 3rd party apps? Will it just ask me?
Click to expand...
Click to collapse
It should ask.
How to do it really depends on which OS you're running.
guidostein said:
It should ask.
How to do it really depends on which OS you're running.
Click to expand...
Click to collapse
Doesnt work, Third party blocked. Trying this but cant find this option http://androidforums.com/inspire-4g-tips-tricks/340745-unknown-sources-now-can-allowed.html
saintnova said:
Doesnt work, Third party blocked. Trying this but cant find this option
Click to expand...
Click to collapse
try going to Setting > Security > Enable Unknown Sources
thats where it is on my phone but im running a custom Rom
if that doesnt work try to find anything in the settings that says enable unknown sources.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
So I did some reading and if your running stock at&t ROM you most likely are not able to allow unknown sources (because for some reason AT&t blocks it).
You might want to try download an app called AppInstaller by FunTrigger from PlayStore (I have never used this and I'm not sure if it will get around the 3rd party problem you are having but its worth a shot)
You should be able to use it to install the APK in your Drive.
---------- Post added at 04:37 PM ---------- Previous post was at 04:09 PM ----------
Okay I think I've got it. Note that i have not tried this myself and take no responsibility if something goes wrong.
How to enable unknown sources on AT&T phone:
Settings > Applications > Manage Applications > All > select Customization Settings Provider and then Clear Data
Next go back one page and select Settings and then Clear Data
Now in Settings > Applications you should see the option unknown sources select it.
Now unknown sources are enabled!
guidostein said:
try going to Setting > Security > Enable Unknown Sources
thats where it is on my phone but im running a custom Rom
if that doesnt work try to find anything in the settings that says enable unknown sources.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
So I did some reading and if your running stock at&t ROM you most likely are not able to allow unknown sources (because for some reason AT&t blocks it).
You might want to try download an app called AppInstaller by FunTrigger from PlayStore (I have never used this and I'm not sure if it will get around the 3rd party problem you are having but its worth a shot)
You should be able to use it to install the APK in your Drive.
---------- Post added at 04:37 PM ---------- Previous post was at 04:09 PM ----------
Okay I think I've got it. Note that i have not tried this myself and take no responsibility if something goes wrong.
How to enable unknown sources on AT&T phone:
Settings > Applications > Manage Applications > All > select Customization Settings Provider and then Clear Data
Next go back one page and select Settings and then Clear Data
Now in Settings > Applications you should see the option unknown sources select it.
Now unknown sources are enabled!
Click to expand...
Click to collapse
And this my friend is why search is amazing :thumbup:
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
And this my friend is why search is amazing :thumbup:
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This option does not appear in my list. Remember i told ya i was reading that hehehe. Dont know why it isnt there though. Sigh. Maybe putting the ATT chip back in will help although i dont think its still activated.
saintnova said:
This option does not appear in my list. Remember i told ya i was reading that hehehe. Dont know why it isnt there though. Sigh. Maybe putting the ATT chip back in will help although i dont think its still activated.
Click to expand...
Click to collapse
I don't know how set you are on keeping your data but why not try a complete factory reset?
And if that doesn't work then just flash a new CWM and ROM,,, there are ways to do that without connecting to a computer.
guidostein said:
I don't know how set you are on keeping your data but why not try a complete factory reset?
And if that doesn't work then just flash a new CWM and ROM,,, there are ways to do that without connecting to a computer.
Click to expand...
Click to collapse
He can't without a usb.. That's just how the captivate is from stock.
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
mrmazak said:
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
Click to expand...
Click to collapse
I tried with diferents usb cables, and nothing happened.
mykrov said:
I tried with diferents usb cables, and nothing happened.
Click to expand...
Click to collapse
Do you know if any of them are sync cables??
codyalan said:
Do you know if any of them are sync cables??
Click to expand...
Click to collapse
They are USB cables that i use on others phones (lg 4x HD and Honor 6X) and work fine with those phones but not on my R1Hd
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
elcarmi said:
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
Click to expand...
Click to collapse
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
mykrov said:
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
Click to expand...
Click to collapse
As far as I know downgrading is not possible without making the phone unusable. If by any chance that is possible maybe an update from an SD Card can work.