Database Develop

[ROM][GT-I9506][ks01ltexx] CyanogenMod 13.0 UNOFFICIAL for the Galaxy S4 LTE-A

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial CyanogenMod 13.0 build for the Galaxy S4 LTE-A (GT-I9506).
Instructions
Make sure that your GT-I9506 has the Lollipop bootloader and modem (The last installed stock ROM must be 5.0.1).
Flash TWRP recovery via Odin.
Boot to TWRP recovery (Vol UP + Home + Power).
Optional: Do nandroid backup
Wipe data / Factory Reset
Install the ROM (CM zip).
Install the Google Apps.
Enjoy!
Known Issues
Everything seems to work fine.
None
Downloads
All: https://www.androidfilehost.com/?w=files&flid=43918
LineageOS 13.0: lineage-13.0-20170122-UNOFFICIAL-ks01ltexx.zip
CyanogenMod 13.0: cm-13.0-20161223-UNOFFICIAL-ks01ltexx.zip
TWRP: official or twrp-3.0.3-0-ks01ltexx.tar
Downloads (by gebaya)
gebaya also provides his builds from my (device-specific) source code.
https://www.mediafire.com/folder/8l264568av165/
Sources
https://github.com/kyasu/android_kernel_samsung_msm8974
https://github.com/kyasu/android_device_samsung_ks01ltexx
https://github.com/kyasu/android_vendor_samsung_ks01ltexx
XDA:DevDB Information
[ROM][GT-I9506][ks01lte] CyanogenMod 13.0 UNOFFICIAL for the Galaxy S4 LTE-A, ROM for the Samsung Galaxy S 4
Contributors
kyasu
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod/LineageOS
Version Information
Status: Stable
Current Stable Version: 2017-01-22
Stable Release Date: 2017-01-22
Created 2015-12-05
Last Updated 2017-01-22

Reserved

WOW! youre the first of CM13 Rom for ks01lte, thank you! :fingers-crossed:

delete

deleted

What a fantastic job of ripping off other hlte/ks01lte contributor's work.
Kudos to you man!

delete

arter97 said:
What a fantastic job of ripping off other hlte/ks01lte contributor's work.
Kudos to you man!
Click to expand...
Click to collapse
I'm working on the Galaxy Alpha (S801) which is my current main device.
http://forum.xda-developers.com/gal...m-cyanogenmod-12-1-unofficial-galaxy-t3230946
I also have the Galaxy S4 LTE-A as my second or third device.
S4 LTE-A is very similar to Alpha (S801), so I tried to port CM13.0.

arter97 said:
What a fantastic job of ripping off other hlte/ks01lte contributor's work.
Kudos to you man!
Click to expand...
Click to collapse
What do you mean? The cm 13 in the OP its not his work? [emoji35]

Thanks for the cm13 rom! And if some others are not agree with you they can publish their own works.... So I will test your rom
Envoyé depuis Tapatalk

For me LTE and mms don't work. Can only work with weak 3G. Anybody got the same?

kyasu said:
I'm working on the Galaxy Alpha (S801) which is my current main device.
http://forum.xda-developers.com/gal...m-cyanogenmod-12-1-unofficial-galaxy-t3230946
I also have the Galaxy S4 LTE-A as my second or third device.
S4 LTE-A is very similar to Alpha (S801), so I tried to port CM13.0.
Click to expand...
Click to collapse
So you're telling me, out of NOWHERE the source code filled with 100+ files were uploaded 20+ days ago with no history of where it came from? Not to mention, the commits seem awfully too similar to the works of others through gerrit. It's disappointing to see things like this being posted on XDA and you still have the cheek to put source code which is not well documented. Bravo
10/10 would Kang again.
Please forum members. Don't do this. Give proper credits and proper documentation. This is an open source community and we expect proper documentation

Furrydaus said:
So you're telling me, out of NOWHERE the source code filled with 100+ files were uploaded 20+ days ago with no history of where it came from? Not to mention, the commits seem awfully too similar to the works of others through gerrit. It's disappointing to see things like this being posted on XDA and you still have the cheek to put source code which is not well documented. Bravo
10/10 would Kang again.
Please forum members. Don't do this. Give proper credits and proper documentation. This is an open source community and we expect proper documentation
Click to expand...
Click to collapse
My GT-9506 porting work is derived from Samsung stock kernel source code and the official CM source tree of ks01lte/hlte/klte and my sltecan work. Unfortunately, the official ks01lte is not so stable for me. So, I tried to port by myself.
https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Many devices are architecturally similar to other devices that are already on the market and have existing CM ports. When a new device comes out, see if you can find out if it may be identical to another device, only with a different sized screen or more memory or some other minor difference. If you find an "ancestor" or "sibling" of your device, much of the work may already be done for you!
Click to expand...
Click to collapse
I credited to CyanogenMod team implicitly. I don't understand what is the problem?
Edited:
For initial bringing up of the Galaxy Alpha (sltecan), I investigated the existing CM ports (klte/ks01lte/hlte) and I found the Samsung Snapdragon 800/801 devices are sibling.
Because I have an experience of the bringing up of the Galaxy Alpha (sltecan), the porting of ks01lte based on the existing CM works is not hard. My ks01lte porting is mainly based on hlte with the latest Samsung Lollipop kernel and blobs. For using the Lollipop blobs, klte and ks01lte are good reference.
I deeply acknowledge and thank the existing CM works (klte/ks01lte/hlte).

Ok.
My ks01lte CM12.1 port utilized Samsung Lollipop kernel and blobs. This is different from other ports. I enjoyed it without publishing.
After I ported My Alpha (sltecan) from CM12.1 to CM13.0, I also ported My ks01lte from CM12.1 to CM13.0 in the exactly same way.
I think the ks01lte CM13.0 is useful for others, I decided to publish it.

rockman.kowal said:
For me LTE and mms don't work. Can only work with weak 3G. Anybody got the same?
Click to expand...
Click to collapse
LTE and mms works for me.
Please make sure that your GT-I9506 has the Lollipop bootloader and modem (The last installed stock ROM must be 5.0.1).

kyasu said:
Ok.
My ks01lte CM12.1 port utilized Samsung Lollipop kernel and blobs. This is different from other ports. I enjoyed it without publishing.
After I ported My Alpha (sltecan) from CM12.1 to CM13.0, I also ported My ks01lte from CM12.1 to CM13.0 in the exactly same way.
I think the ks01lte CM13.0 is useful for others, I decided to publish it.
Click to expand...
Click to collapse
cm13 is awesome, blazing fast. Few fc's but thanks for this experience. This rom has true added value for our obscolent device.
I wouldn't listen much to people saying you copied stuff. As far as i can see (and everyone else on this forum), this is the only cm13 rom available. So you basically it's impossible to rip something from another cm13 rom.
Let jealous people talk, you are doing a great job. Thanks for your effort.

@kyasu, thanks. Its working very well. Some mistakes in the spanish translation and some strings are still in english, but the rom its very smooth. Instaled without problem with nano open gapps. I am still testing...

No vibration when touching hardware keys(menu/back) for both of cm12.1 /cm13 in my e330. Anybody who has same phenomenon or only happened to me?
Edit: long press is vibration working but short press is not vibrated

Please provide more feedback about this ROM, how stable can it be as daily driver?
what is not working?

kornelius1982 said:
Please provide more feedback about this ROM, how stable can it be as daily driver?
what is not working?
Click to expand...
Click to collapse
This rom is already my daily driver.
At least, the following functions are tested and worked:
WiFi
3G
LTE
3G Calling
VoIP
WiFi Tethering
Bluetooth
Camera
Video Recording
Sound
Ok Google
Sensors
Compass
GPS
NFC
SD Card
USB OTG
For using MTP in M, every time you have to tap and select MTP.
And you have to install Google Apps for M. I'm using Open GApps (micro).

[DELETED][CM13.0][09/07/16][Compiled From Official Sources]

I am not responsible for bricked devices, dead SD cards, explosions, thermonuclear war, or you getting fired because the alarm application failed, Please read the thread carefully before deciding to flash this rom. Flash this on your own risk.
This is my build of cm13, it is compiled from official cm13 sources of our device, since banmeifyouwant's cm13 builds are offline right now, my builds can be useful for users in the meantime. If banmeifyouwant continues his official cm source based builds in future, I will stop updating this.
Flashing Instructions -
1. Make backup of all partitions in twrp and keep it on sdcard or anywhere safe
2. Wipe data, cache, system, dalvik in twrp
3. Flash cm-13.0-radios
4. Flash rom, gapps
5. Reboot
Bugs -
Nothing I could notice, tell if you find any.
Downloads -
Removed
XDA:DevDB Information
Cm13 Official Source based, ROM for the Xiaomi Redmi Note 3
Contributors
Umang96, TheStrix, banmeifyouwant
Source Code: github.com/cyanogenmod
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Created 2016-07-12
Last Updated 2016-07-12

Reserved

Thank u..shld we use twrp alka and does it lock BL??

Is this ROM stable enough for daily driving? Also, can I flash C-Apps on this ROM?

ryanchua0202 said:
Is this ROM stable enough for daily driving? Also, can I flash C-Apps on this ROM?
Click to expand...
Click to collapse
Yes, it's stable, I'm using it and I don't know what are c apps.

Umang96 said:
Yes, it's stable, I'm using it and I don't know what are c apps.
Click to expand...
Click to collapse
Cyanogen apps
Thx rom anyway!

Thanks for the quick reply. By the way, C-Apps are Cyanogen OS apps, such as Cyanogen Account support and so on. I will try to flash it and see how it goes.

Is ir blaster working and is this ROM having same data bug as ROM by banmeifyouwant

Do I need Alka for this or is officiall fine?

Was this thread really necessary?
if the official source was ready @TheStrix would have already made a thread

And I do plan to make a thread and maintain it once I start official nightlies.
Test builds can be shared in a diff way too

TheStrix said:
And I do plan to make a thread and maintain it once I start official nightlies.
Test builds can be shared in a diff way too
Click to expand...
Click to collapse
Sure you will, when you or balika do that, i'll close this thread.

Umang96 said:
Sure you will, when you or balika do that, i'll close this thread.
Click to expand...
Click to collapse
this is funny...official maintainer is informing source is a wip and he will make a thread when its ready still u want to give users a wip build xD

Shahan_mik3 said:
this is funny...official maintainer is informing source is a wip and he will make a thread when its ready still u want to give users a wip build xD
Click to expand...
Click to collapse
TheStrix said:
And I do plan to make a thread and maintain it once I start official nightlies.
Test builds can be shared in a diff way too
Click to expand...
Click to collapse
Okay then, I just thought since balika's builds were same too and he had stopped it from some time, those were based on official cm source and no one had problem then, in fact most of the roms are based on official cm tree and kernel only, I didn't mean to create a problem by this thread, this is why I mentioned it in op as well that I will discontinue it if balika starts it back. I know TheStrix is our cm maintainer and I don't want to disturb him, so I'll close the thread and remove my build's links.

Umang96 said:
Okay then, I just thought since balika's builds were same too and he had stopped it from some time, those were based on official cm source and no one had problem then, in fact most of the roms are based on official cm tree and kernel only, I didn't mean to create a problem by this thread, this is why I mentioned it in op as well that I will discontinue it if balika starts it back. I know TheStrix is our cm maintainer and I don't want to disturb him, so I'll close the thread and remove my build's links.
Click to expand...
Click to collapse
The point here is different you can get cm builds from thestrix afh no need to have 1-2 cm threads which distributes same thing to users. You can build other roms which don't have any maintainer
Sent from my Redmi Note 3 using Tapatalk

[ROM][Slim][6.0.1][AOSP_r74][Slim 6 For Kenzo][21/11/2016]

I am not responsible for bricked devices, dead SD cards, explosions, thermonuclear war, or you getting fired because the alarm application failed, Please read the thread carefully before deciding to flash this rom. Flash this on your own risk.
SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim6 is the project name for SlimRoms based on Android 6.0.1 Marshmallow and offers the following original features:
Slim6 is still in its early stages of development so if your favourite feature is not back yet, don’t worry more will be added with later releases.
SlimLauncher
An Open source, feature filled launcher! -More fun than you can shake a stick at.
Important links:
slimroms.org - Our official website and your source for anything SlimRoms related.
FAQ - Have a question? Consider reading our FAQ first, you might find your answer there!.
Report-bugs - Found a bug? Send it our way!
Kernel Source - The source of your device's kernel.
Get in touch!
- You can contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Disclaimer: We are not responsible for any damages to your device.
Flashing instructions:
Download slim rom zip to your sdcard
Backup all your partitions
Flash slim and gapps
Downloads:
Slim For Kenzo 21/11/2016
XDA:DevDB Information
Slim For Kenzo, ROM for the Xiaomi Redmi Note 3
Contributors
Umang96
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Created 2016-07-17
Last Updated 2016-11-21

Reserved

Reserved

Thanks for the rom.Had used slim rom a lot on 1+1. Will flash it sometime and see

Slim rom for our device. Hurray. Will have to try...I am on MIUI 8( have to spend little time on it too). Slim roms are considered to be best. Its a hit among Redmi 1s users too.

2 questions: Does it use stock or radon kernel and why RN3 Pro is not listed on the official slim site?

Was about to release the rom
MY Build
https://www.androidfilehost.com/?fid=24591000424947932

white FANNg said:
2 questions: Does it use stock or radon kernel and why RN3 Pro is not listed on the official slim site?
Click to expand...
Click to collapse
Radon
manhar2108 said:
Was about to release the rom
MY Build
https://www.androidfilehost.com/?fid=24591000424947932
Click to expand...
Click to collapse
I didn't knew you were working on slim too

Hi,
Cannot thank you enough.
Question: You say we need to flash CM-Radios.zip. But I was on the Global Build of Miui 8 (6.7.14),, delivered from the guys at Xiaomi.eu and flashed just the ROM and GApps and everything seems to be working fine.
Why is the radio.zip needed? I'll continue to test to check if everything is working right.
I'm soooooooooo happy for this build, you have no idea. Coming from an 1+1 I'm used to flash often
THANK YOU SO MUCH, you're the man.
Regards,
- aurocha
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
Umang96 said:
Stock
I didn't knew you were working on slim too
Click to expand...
Click to collapse
Wow! Thanks to both of you.
Any of you guy thinking on building PA (AOSPA, Paranoid Android?)
Or even Exodus?
Regards,
- aurocha

Wow! Thanks to both of you.
Any of you guy thinking on building PA (AOSPA, Paranoid Android?)
Or even Exodus
Regards,
- aurocha
Click to expand...
Click to collapse
Can you please not quote whole OP ?
Exodus was my favorite and it's closed source

Umang96 said:
Can you please not quote whole OP ?
Exodus was my favorite and it's closed source
Click to expand...
Click to collapse
You're right, sorry, just edited the post.

manhar2108 said:
Was about to release the rom
MY Build
https://www.androidfilehost.com/?fid=24591000424947932
Click to expand...
Click to collapse
Any description?

Can you put your kernel (Radon) this firmware?

DowL_HH4 said:
Can you put your kernel (Radon) this firmware?
Click to expand...
Click to collapse
I can but you can flash radon externally, so whats the problem ?

Umang96 said:
I can but you can flash radon externally, so whats the problem ?
Click to expand...
Click to collapse
Sorry for my English, not translated. I ask: can we do it?

Any screen shots pls
Sent from my Redmi Note 3 using XDA-Developers mobile app

This rom, really clear AOSP or based Cyanogen Mod? and rom support Quick charge?

Umang96 said:
Must be on cm13 compatible radios
Click to expand...
Click to collapse
What u mean by that ? That is only if I am coming from miui or ?

marko94 said:
What u mean by that ? That is only if I am coming from miui or ?
Click to expand...
Click to collapse
People get problems like fingerprint not working and settings fc if they don't flash radios.

Can you add Vo-LTE support for this ? Jio SIMs are literally available to almost anyone now. Thanks. Also is it possible to create a Telegram group where you can announce updates to Radon Kernel as well as Slim ROM ?

[ROM][OFFICIAL][8.1][6/01/18] ResurrectionRemix 6.0 for S9/S9+ (Exynos)

Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Introduction
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the CM team, Lineage, DU, AICP, OMNI team, SLIMROMS and of course to all the supporters.
Note
BRE5 Vendor NEEDED
This ROM is for Exynos variant only. It won't work on you SD variant device.
I change the default screen density to 560 (for S9). If you feel things are too small, manually change it to 600 or 640.
What's working
Everything works on the official Lineage build.
What's not working
Everything doesn't work on the official Lineage build.
Instructions
Install the TWRP and make sure it's fully functional
Download the build and flash it through TWRP
Install the Gapps and addOnSU if you want
Downloads
ROM (S9): http://downloads.resurrectionremix.com/starlte/
ROM (S9+): http://downloads.resurrectionremix.com/star2lte/
Gapps: https://wiki.lineageos.org/gapps.html
AddOnSU: https://download.lineageos.org/extras
Sources
Kernel: https://github.com/msdx321/android_kernel_samsung_starlte
Device Tree (starlte): https://github.com/msdx321/android_device_samsung_starlte
Device Tree (star2lte): https://github.com/msdx321/android_device_samsung_starlte
Device Tree (star-common): https://github.com/msdx321/android_device_samsung_star-common
Chaneglog
Check in RR OTA app
https://github.com/msdx321/RR-OTA/
Reporting Bugs
Open an issue on my GitHub repo
PM me on Telegram (if you can find me, I got no username LOL)
Join this TG Group
Or this TG Group (This one is a more generally S9/S9+ AOSP-like ROM group)
Donation
PayPal
Credit
jesec This Rom is based on the device tree/kernel source he made for Lineage
farovitus Helping me bring kernel up to the latest linux-stable version
XDA:DevDB Information
ResurrectionRemix, ROM for the Samsung Galaxy S9
Contributors
msdx321, jesec, farovitus
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: Lineage
Version Information
Status: Stable
Current Stable Version: RR-O-v6.0.0-20180601
Stable Release Date: 2018-06-01
Created 2018-04-27
Last Updated 2018-06-02

First. Thanks for the rom. Testing was good so far

that doesnt make sense,, whats working- everything,,whats not working- everything
Not clear at all what is going to work or not so wont be installing until you can fix what is and what is not working.

deano121 said:
that doesnt make sense,, whats working- everything,,whats not working- everything
Not clear at all what is going to work or not so wont be installing until you can fix what is and what is not working.
Click to expand...
Click to collapse
Check lineage thread. Whatever works and doesnt work for that rom will be the same for this rom

Great work.Thanks for your working.

is it possible to add RMM bypass patch to the rom?

When a AOSP rom gets speeds like this all you say is thank you

illuzi0n said:
is it possible to add RMM bypass patch to the rom?
Click to expand...
Click to collapse
AOSP doesn't have those RMM things, so we don't need a bypass patch actually.

msdx321 said:
AOSP doesn't have those RMM things, so we don't need a bypass patch actually.
Click to expand...
Click to collapse
I have the oem unlock issue which i have to wait 7 days for it to appear in dev settings though. This doesnt happen in AOSP?
Is this patch needed for this rom?
https://forum.xda-developers.com/galaxy-s9-plus/how-to/guide-root-s9-oem-fix-t3763974

I'm using this ROM at the moment and SIM Toolkit is not working
I have to use two phones because most of the roms dont support this function.I need this function so I can send money as I am a business person

:good:

CharlieYang0531 said:
好久不见了，居然在这里看到
Click to expand...
Click to collapse
You have to write in english!

CharlieYang0531 said:
好久不见了，居然在这里看到
Click to expand...
Click to collapse
Delete this post.Only English
Sent from my Samsung Galaxy S9+ using XDA Labs

@msdx321 are you going to update RR with new lineageos sources by jesec?

illuzi0n said:
I have the oem unlock issue which i have to wait 7 days for it to appear in dev settings though. This doesnt happen in AOSP?
Is this patch needed for this rom?
https://forum.xda-developers.com/galaxy-s9-plus/how-to/guide-root-s9-oem-fix-t3763974
Click to expand...
Click to collapse
Nope, flashing any AOSP based rom won't send you to RMM jail (can't save you from jail as well)

Black_Focus_X said:
@msdx321 are you going to update RR with new lineageos sources by jesec?
Click to expand...
Click to collapse
Sure. Jesec keep changing things those days, it will be a delay in syncing his changes but won't be long (1-3 days)

Can anyone check if wallpaper rotation works on this ROM? Does not on stock...

Thanks m8!
You guys can’t imagine how long I’ve been waiting for this day. That’s one hell of a benefit google gave us there with treble. Can’t imagine that this would have been possible that soon otherwise.
Anyhow, there are a few quirks I’ve noticed (of course, no logcat):
- Power off leads to a reboot
- Enhanced reboot menu isn’t working, just reboots
- su appears to be working adb wise, but apps granted don’t work (f.e. Titanium)
- Magisk (even b16.4) results in a boot loop, guess that’s qwertys beer, not yours
That’s still not holding me from running it as DD from this day.

Does anybody know if it supports turning on the screen or unlocking the phone with the soft touch 3d home button .

batfink1 said:
Does anybody know if it supports turning on the screen or unlocking the phone with the soft touch 3d home button .
Click to expand...
Click to collapse
It does on lineage official so it should on RR

[UNOFFICIAL] LineageOS 15.1 for ZTE Axon 7 [Baddar-Kernel] [Final Build:03.08.20]

This is nothing big and I'm not a Developer.
This Thread is just for Unoffical LineageOS Builds that I do from time to time.
The Builds are done with Udev's Device Tree and Vendor Files and Offical LineageOS Sources.
I might make some changes at some point, but don't hold your breath.
So far all this is, is Udev's fixes and updated Lineage Sources (fixes) and monthly Security Patches.
I post updates whenever something interesting happens (which is now hardly ever with Lineage 15.1), or when there's a new security patch.
The only reason I'm making a new Thread for this, is because I don't want to post these updates in Ordenkrieger's/Udev's Official Thread.
Oh and the Disclaimer from the Original Thread.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Warning:
This ROM will not work on devices that have not installed the O bootloader and appropriate modem package below. Any failure in this process could lead to an unrecoverable bricked device.
Click to expand...
Click to collapse
With that out of the way, here is the Link to my latest Build:
https://mega.nz/file/eIEWFSAS#cmU62oG5IARruOPcYwAaSqnZKGvB3qdemJwnZt9SM_I
Thanks to:
OrdenKrieger, Unjustified Dev, king1990, DrakenFX, tdm and tprfd
ROM OS Version: 8.x Oreo
Based On: LineageOS ( Source ) ( Vendor )
Kernel version: 3.18.140-Baddar-RC1.2 ( Source )
Version Information
Status: Stable
Created: 12-04-2019
Last Updated: 03-08-2020

Changelog:
03.08.20
https://www.lineageoslog.com/15.1
20.04.19
Initial Release

Just in case...

Running great so far! Gcam FCing for me, but maybe it's just bad opengapps nightly. No battery stuck bug after changing battery.

Updated Version with latest LineageOS Fixes and latest Android Security Update, linked in the first Post.
The Build was made without Udev's latest Commits ( click ) as I don't know if he wants them in a public ROM yet ( and it says WIP anyway).

thanks!! you awesome. the previous April20 build has been great. -GA
[armitage] said:
Updated Version with latest LineageOS Fixes and latest Android Security Update, linked in the first Post.
The Build was made without Udev's latest Commits ( click ) as I don't know if he wants them in a public ROM yet ( and it says WIP anyway).
Click to expand...
Click to collapse

i am using this rom right now with baddar rc 1.1 kernel.Anyone got dolby atmos working?

I don't think that there is a way to get it working on newer non-stock Roms. I've given up on that quite a while ago.

i tried some zips,none works...i also give it up lol.The vendor really need updates also i think.Play store not certified even with fp props module.More heat on the phone,cpu load very high

Must be something on your side. No problems here whatsoever.
Play store works fine, no heat, low discharge rate, no high cpu usage.
I mean my battery is pretty much "trash", after two years of not treating it too kindly and I still get almost 5h SOT, which is not too bad I guess.
Oh and there's not really much I can do about the vendor and haven't tried that kernel yet. Using stock lineage kernel here.

i used it for some hours now,and i think i agree with you.Idle is really great,power consumption alsnly thing playstore not certified.
Thank you for these builds!!

Just uploaded the probably last update based on Lineage 15.1, as the the Axon 7 has been removed and (as you can read here) is no longer maintained.
Maybe it'll be back with Lineage 16 one day.

[armitage said:
;79596505]Just uploaded the probably last update based on Lineage 15.1, as the the Axon 7 has been removed and (as you can read here) is no longer maintained.
Maybe it'll be back with Lineage 16 one day.
Click to expand...
Click to collapse
It hasn't been maintained in months and months. I am pretty sure this only means that lineage will no longer provide an 'official' build. You can still build yours the way you're doing it.

So what you're saying is that there will still be some fixes and security patches added but I won't see a device specific changelog for the axon7 and there won't be any automated builds?
So I'd just have to check another device's changes to see when a for example a security patch was added and this will still be included when I check out and build for the axon?

[armitage] said:
So what you're saying is that there will still be some fixes and security patches added but I won't see a device specific changelog for the axon7 and there won't be any automated builds?
So I'd just have to check another device's changes to see when a for example a security patch was added and this will still be included when I check out and build for the axon?
Click to expand...
Click to collapse
No more automated builds for official. There hasn't been device specific changes for many months. The changelog you see on lineageoslog for axon7 includes the non-device specific changes and has the other device specific changes filtered out.
You can look here for the full changelog for 15.1 here:
https://www.lineageoslog.com/15.1
I can see the security bump was merged on the 17th.
It should be business as usual for your builds that you're providing here... I hope.

thanks for the ongoing efforts to update the builds!! much appreciated. do you have option to buy you a beer?? -GA
tprfd said:
No more automated builds for official. There hasn't been device specific changes for many months. The changelog you see on lineageoslog for axon7 includes the non-device specific changes and has the other device specific changes filtered out.
You can look here for the full changelog for 15.1 here:
https://www.lineageoslog.com/15.1
I can see the security bump was merged on the 17th.
It should be business as usual for your builds that you're providing here... I hope.
Click to expand...
Click to collapse

gads1 said:
thanks for the ongoing efforts to update the builds!! much appreciated. do you have option to buy you a beer?? -GA
Click to expand...
Click to collapse
Not me you should ask!
armitage is the one hosting/building these... and of course all of the work put in initially from the devs.

whoops!! thanks for correction. I wasn't paying attention... lazy! beers for everyone....
tprfd said:
Not me you should ask!
armitage is the one ....
Click to expand...
Click to collapse

I wasn't really thinking of that at all, as I don't really consider what I'm doing that important, but as I'm in the process of moving and a money will be tight over the next couple of months, sure... a beer would be appreciated.
But just to make sure... this will never be a necessity. I will probably build these as long as people need them, even if I don't have the device anymore, as it is not that hard to do and doesn't take a lot of time, once everything is set up.
Anyway, I added my paypal url to my profile.

It's not clear in this thread but is this build treble or not? Thanks